|
|
|
Symbols
- 100Base-T hub,
4. Attach the Adapter to the Network
- 100Base-T hub/switch,
4. Attach the Adapter to the Network
- 10Base-T hub/switch,
4. Attach the Adapter to the Network
A
- adapter configurations and limitations,
a. Access the adapter slot(s)
- adapter part numbers,
Exchange Assembly
- adapter slot connector,
c. Insert the adapter into the slot
- antistatic precautions,
1. Prepare to Install the Adapter,
Removal/Replacement Instructions,
Removal/Replacement of the Adapter
- attach adapter to network,
4. Attach the Adapter to the Network
B
- backplane,
Product Description
- before installing,
1. Prepare to Install the Adapter,
2. Shut Down the Operating System and Switch Off the Computer
- before removing,
Removal/Replacement of the Adapter
C
- category 3 or 5 cable,
4. Attach the Adapter to the Network
- configurations and limitations,
a. Access the adapter slot(s)
- configure adapter to system,
5. Configure the Adapter into the System
D
- daughter card model and revision number,
Record Adapter Information
- declaration of conformity,
Declaration of Conformity
E
- exchange assembly,
Exchange Assembly
- extractor levers,
c. Insert the adapter into the slot
F
- faulty adapters,
Troubleshooting Tools
- Field Replaceable Units,
Service Information,
Field Replaceable Units
- FRU
- Field Replaceable Units,
Service Information
- FRUs,
Field Replaceable Units
G
- grounding wrist strap,
Tools and Accessories,
Observe Antistatic Precautions,
Gather Tools and Accessories,
Removal/Replacement Instructions
H
- HP-PB 100Base-T Network Adapter,
Product Description
- HP-PB backplane,
Product Description
- hub/switch,
4. Attach the Adapter to the Network,
5. Configure the Adapter into the System,
6. Verify Operation,
Troubleshooting Checklist
I
- inserting and securing adapter,
b. Select an available slot
- install the adapter,
HP-PB 100Base-T Network Adapter Installation at a Glance,
Installation Overview,
Installation Procedure,
1. Prepare to Install the Adapter,
3. Install the Adapter
L
- LAN
- HP-PB 100Base-T Network Adapter Local Area Network,
Product Description
- LED patterns,
6. Verify Operation
- LEDs,
4. Attach the Adapter to the Network,
6. Verify Operation,
Card LEDs,
Troubleshooting Checklist
M
- MAC address,
Record Adapter Information,
Troubleshooting Checklist
- motherboard model and revision number,
Record Adapter Information
- MPE systems,
5. Configure the Adapter into the System
N
- network
- connecton to,
4. Attach the Adapter to the Network
P
- part numbers,
Verify Product Contents,
Exchange Assembly
- port connection,
4. Attach the Adapter to the Network
- product contents,
Product Contents,
Verify Product Contents
- product description,
Product Description
- product numbers,
Verify Product Contents,
Exchange Assembly
R
- removal/replacement of adapter,
Removal/Replacement of the Adapter
- reshipment guidelines,
Service Information,
Reshipment Guidelines
- retaining screws,
c. Insert the adapter into the slot
- RFI suppression,
Removal/Replacement of the Adapter
- RJ-45 connector,
Product Description,
4. Attach the Adapter to the Network
S
- select adapter slot,
3. Install the Adapter,
a. Access the adapter slot(s)
- serial number,
Record Adapter Information
- service information,
Service Information
- shutdown procedures,
2. Shut Down the Operating System and Switch Off the Computer,
Removal/Replacement of the Adapter
- station address,
Record Adapter Information
- storage of adapters,
Removal/Replacement Instructions,
Technical Specifications
- switch/hub,
4. Attach the Adapter to the Network,
5. Configure the Adapter into the System,
6. Verify Operation,
Troubleshooting Checklist
T
- technical specifications,
Service Information,
Technical Specifications
- tools and accessories,
Tools and Accessories,
Gather Tools and Accessories
- troubleshooting,
Service Information,
Troubleshooting Tools,
Troubleshooting Checklist
V
- verify operation,
6. Verify Operation
|
