|
|
A
- ADDOPT,
ADDOPT
- asynchronous I/O,
Asynchronous I/O
- cross system,
Calls Affecting the Local Process
- programming with,
Steps for Programming with Asynchronous I/O
B
- blocking calls
- enable in IPCCONTROL, Parameters
C
- call data
- in IPCRECVCN, Parameters
- call socket,
Connections
- creating,
1. Creating a Call Socket
- descriptors,
Descriptors
- looking up a name,
3. Looking Up a Call Socket Name
- naming,
2. Naming a Call Socket
- call user data,
Access to the Call User Data (CUD) Field
- in IPCCONNECT, Parameters
- in IPCCONTROL, Parameters
- in IPCSHUTDOWN, Parameters
- no address flag, IPCCONNECT,
Parameters
- protocol relative address,
Access to the Call User Data (CUD) Field
- call user data flag
- in IPCRECV, Parameters
- calldesc,
1. Creating a Call Socket
- calling node address
- flag in IPCRECVCN, Parameters
- in IPCRECVCN, Parameters
- catch-all socket,
Access to the Call User Data (CUD) Field
- in IPCCREATE, Parameters
- cause and diagnostic codes
- in IPCSHUTDOWN, Parameters
- clear user data
- in IPCSHUTDOWN, Parameters
- common parameters
- data parameter, Data Parameter
- flags, Flags Parameter
- opt, Opt Parameter
- result, Result Parameter
- compatibility mode,
Compatibility vs. Native Mode,
Compatibility Mode
- condition codes,
Condition Codes
- connection
- checking status,
6. Checking the Status of a Connection
- receiving a request,
5. Receiving a Connection Request
- receiving data,
Sending and Receiving Data Over a Connection
- requesting,
4. Requesting a Connection
- sending data,
Sending and Receiving Data Over a Connection
- shutting down,
Shutting Down Sockets and Connections,
TCP Access
- connection request
- accept in IPCCONTROL, Parameters
- cress-system
- NetIPC errors, NetIPC Error Codes
- to HP 1000, HP 3000 to HP 1000 NetIPC
- to PC, HP 3000 to PC NetIPC
- cross-system
- asynchronous I/O,
Calls Affecting the Local Process
- IPCCONTROL request codes,
Calls Affecting the Local Process
- local process,
Calls Affecting the Local Process
- manipulation of descriptors,
Calls Affecting the Local Process
- number of sockets,
Calls Affecting the Local Process
- remote process,
Calls Affecting the Remote Process
- software revision codes,
Software Required
- to HP 9000,
HP 3000 to HP 9000 NetIPC
- CUD
- call user data,
Access to the Call User Data (CUD) Field
D
- D bit,
Access to X.25 Protocol Features
- daemon,
HP 9000 Program Startup
- data location descriptor,
Data Parameter
- compatibility mode, Compatibility Mode
- native mode, Native Mode
- structure, Data Parameter
- data offset
- in IPCRECV, Parameters
- in IPCSEND, Parameters
- data parameters,
Data Parameter
- data transfer
- messages, TCP Access
- stream mode, TCP Access
- databfr,
TCP Access
- defer connection
- in IPCRECVCN, Parameters
- descriptor
- call, Descriptors
- destination, Descriptors
- VC socket, Descriptors
- destdesc parameter,
3. Looking Up a Call Socket Name
- destination descriptor,
Descriptors
- destrination descriptor,
Naming, Socket Registry and Destinations
- destroy data flag
- in IPCRECV, Parameters
- direct access to X.25
- features, Features
- limitations, Limitations
- discarded data
- in IPCRECV, Parameters
- in IPCRECVCN, Parameters
- dlen parameter,
DLEN Parameter
E
- end-to-end achnowledgement
- in IPCSEND, Parameters
- end-to-end acknowledgement,
Parameters
- establishing a connection
- using IPCDEST,
Connection Establishment Using IPCDEST
- using IPCNAME,
Connection Establishment Using IPCNAME
- example
- compatibility mode, Example 2
- native mode, Example 2
- TCP, Example 1,
Example 2
- using NetIPC, NetIPC Examples
- vectored I/O CM and NM, Example 2
- X.25,
Example 3,
Example 4
- exchanging data
- TCP, TCP Access
- X.25, X.25 Access
F
- facilities set name
- in IPCCONNECT, Parameters
- facility field,
Facility Field
- in IPCCONNECT, Parameters
- in IPCCONTROL, Parameters
- in IPCRECV, Parameters
- in IPCRECVCN, Parameters
- fast select
- in IPCRECVCN, Parameters
- fast select facility,
Fast Select Options
- no restriction, Using Fast Select
- fast select restricted
- in IPCRECVCN, Parameters
- flags parameter,
Flags Parameter
G
- graceful release,
TCP Access
H
H
- HP 1000 Program Startup
- cross-system,
HP 1000 Program Startup
- HP 3000 Program Startup
- cross-system, HP 3000 Program Startup
- HP 9000 Program Startup
- cross-system, HP 9000 Program Startup
- HP-UX,
HP 9000 Program Startup
I
- INITOPT, INITOPT
- interrupt packet
- send, in IPCCONTROL, Parameters
- IODONTWAIT,
Asynchronous I/O,
IO[DONT]WAIT
- IOWAIT,
Asynchronous I/O,
IO[DONT]WAIT
- IPC Interpreter,
IPC Interpreter (IPCINT)
- IPCCONNECT,
4. Requesting a Connection
- IPCCONTROL,
IPCCONTROL
- IPCCREATE,
4. Requesting a Connection
- IPCDEST,
IPCDEST
- IPCERRMSG,
IPCERRMSG
- IPCGET,
Additional NetIPC Functions,
IPCGET
- IPCGIVE,
Additional NetIPC Functions,
IPCGIVE
- IPCINT,
IPC Interpreter (IPCINT)
- IPCLOOKUP,
2. Naming a Call Socket,
IPCLOOKUP
- IPCNAME,
Additional NetIPC Functions
- IPCNAMERASE,
Additional NetIPC Functions
- IPCRECV,
5. Receiving a Connection Request,
IPCRECV
- IPCRECVCN,
5. Receiving a Connection Request
- IPCSEND,
Sending and Receiving Data Over a Connection
- IPCSHUTDOWN,
Shutting Down Sockets and Connections,
IPCSHUTDOWN,
Description
K
- known length (messages),
TCP Access
L
- local node name
- returned in IPCCONTROL, Parameters
- location,
3. Looking Up a Call Socket Name
M
- maximum number of
socket descriptors,
Calls Affecting the Local Process
- maximum receive size, TCP
- in IPCRECVCN, Parameters
- maximum send size, TCP
- in IPCRECVCN, Parameters
- message mode transfer,
X.25 Access
- messages
- known length, TCP Access
- length not known, TCP Access
- more data flag
- in IPCRECV, Parameters
- MPE-XL to MPE-V NetIPC,
NetIPC Between MPE-XL and MPE-V Systems
- X.25, NetIPC Between MPE-XL and MPE-V Systems
N
- native mode,
Compatibility vs. Native Mode,
Native Mode
- NetIPC
- definition, NetIPC Fundamentals
- network address
- X.25 in IPCDEST, Parameters
- network name, X.25
- in IPCCREATE, Parameters
- no output flag
- inIPCRECV, Parameters
- nowait I/O
- enable in IPCCONTROL, Parameters
- nowait receives
- enable in IPCCONTROL, Parameters
- nowait sends
- disable in IPCCONTROL, Parameters
- enable in IPCCONTROL, Parameters
O
- opt parameter,
Opt Parameter
- option entry structure, Opt Parameter
- structure, Opt Parameter
- option entry structure,
Opt Parameter
- option variable,
Option Variable
- OPTOVERHEAD,
Opt Parameter,
OPTOVERHEAD
P
- packets
- types returned in IPCCONTROL, Parameters
- PAD flag
- in IPCRECVCN, Parameters
- PC NetIPC Program Startup
- cross-system, PC NetIPC Program Startup
- permanent virtual circuit,
Permanent Virtual Circuits (PVCs)
- preview data flag
- in IPCRECV, Parameters
- Privileged Mode,
Connections
- Program Startup,
Program Startup
- PC, PC NetIPC Program Startup
- program startup
- HP 1000, HP 1000 Program Startup
- HP 3000, HP 3000 Program Startup
- HP 9000, HP 9000 Program Startup
- protected connections
- in IPCRECVCN, Parameters
- protocol relative address
- in IPCCREATE, Parameters
- PVC
- permanent virtual circuit,
Permanent Virtual Circuits (PVCs)
Q
- Q bit,
Access to X.25 Protocol Features
- qualifier bit
- in IPCRECV, Parameters
- in IPCSEND, Parameters
R
- reason code
- in IPCSHUTDOWN, Parameters
- reason for error or event
- in IPCCONTROL, Parameters
- Remote Process Management
- RPM, NetIPC Fundamentals
- remote system,
Sockets
- reset packet
- send, in IPCCONTROL, Parameters
- result parameter,
TCP Access
- RPM
- Remote Process Management, NetIPC Fundamentals
S
- Shutting Down
Sockets and Connections,
Shutting Down Sockets and Connections
- TCP, TCP Access
- X.25, X.25 Access
- socket, Sockets
- maximum number,
Calls Affecting the Local Process
- shutting down,
Shutting Down Sockets and Connections
- TCP, Sockets
- X.25, Sockets
- socket registry,
Naming, Socket Registry and Destinations
- socketname,
3. Looking Up a Call Socket Name
- socketname parameter,
3. Looking Up a Call Socket Name
- stream mode,
TCP Access
- strmove, TCP Access
- summary of NetIPC intrinsics,
Summary of NetIPC Intrinsics
- SVC
- switched virtual circuit,
Switched Virtual Circuits (SVCs)
- switched virtual circuit (SVC),
Switched Virtual Circuits (SVCs)
- synchronous mode,
Additional NetIPC Functions
- syntax
- NetIPC intrinsics, Syntax
T
- TCP
- graceful release, TCP Access
- Transmission Control Protocol, Sockets
- TCP checksum
- in IPCCONNECT, Parameters
- in IPCRECVCN, Parameters
- tempbfr, TCP Access
- timeout
- change for sends, Parameters
- change in IPCCONTROL, Parameters
- timeout, no activity
- set in IPCCONTROL, Parameters
- timeouts
- disabling, NetIPC Examples
- tracing
- disable in IPCCONTROL, Parameters
- enable in IPCCONTROL, Parameters
- enable transport layer, Parameters
- Transmission Control Protocol
- TCP, Sockets
- Transport Layer,
Sockets
U
- urgent data
- in IPCRECV, Parameters
- in IPCSEND, Parameters
V
- VC socket,
Connections
- descriptors, Descriptors
- vcdesc, Descriptors
- vectored data,
Data Parameter
- in IPCSEND, Parameters
- vectored data flag
- in IPCRECV, Parameters
- virtual circuit,
Connections
- establishing a connection,
Establishing a Level 4 Connection
W
- well-known name,
2. Naming a Call Socket
X
- X.25
- address in IPCDEST, Parameters
- call data (CUD),
Access to the Call User Data (CUD) Field
- cause and diagnostic codes,
Access to X.25 Protocol Features
- D bit,
Access to X.25 Protocol Features
- defer connection request,
Access to the Call User Data (CUD) Field
- facility field, Facility Field
- fast select facility, Fast Select Options
- interrupt and reset packets,
Access to X.25 Protocol Features
- no activity timeout,
Access to X.25 Protocol Features
- Q bit, Access to X.25 Protocol Features
|