 |
» |
|
|
|
A- AAUTO
- SYSFILE configurator command, Displaying Current File Information
- ABOOT
- SYSFILE configurator command, Displaying Current File Information, Adding boot files
- ABORTJOB
- MPE/iX command, Running IOMAP, Running ODE
- access panel lock , Resetting the system with the front panel switches
- access port
- configuring, Returning from Control Mode to Console Mode
- access port (AP) , Resetting the system using the console
- support interface , Resetting the system using the console
- testing, Transferring Control (Soft Reset)
- using, Using the Access Port (AP)
- access port commands, Using Access Port Commands
- RS , Hard Reset
- TC , Soft Reset
- Using, Using Access Port Commands
- access port(AP)
- using , Resetting the system using the console
- account
- SYS, Using the System Generator (SYSGEN)
- accounts used to store configuration data, Using the System Generator (SYSGEN)
- ACLASS
- I/O Configurator command, Adding Objects in SYSGEN
- ACMSL
- SYSFILE Configurator command, Displaying Current File Information
- SYSFILE configurator command, Adding a segment to the compatibility mode segmented library (CMSL)
- activating the configurators
- SYSGEN utility, Activating the Configurators
- activating the I/O configurator, Using the SYSGEN I/O Configurator
- adding a boot image to the SYSGEN tape, Displaying Current File Information
- adding a segment to a temporary copy of the CMSL , Displaying Current File Information
- adding an autoboot FILE to the SYSGEN tape, Displaying Current File Information
- adding classes in SYSGEN, Adding Objects in SYSGEN
- adding devices in SYSGEN , Adding Objects in SYSGEN
- adding file names to DUMP to TAPE, Adding file names to dump to tape
- adding I/O paths in SYSGEN , Adding Objects in SYSGEN
- adding objects to the SYSGEN tape, Displaying Current File Information
- ADEV
- I/O Configurator command, Adding Objects in SYSGEN
- alternate boot path
- example , Resetting the system with the front panel switches
- alternate boot paths, I/O paths used to boot a system
- analyser cards, Displaying Configured Devices
- AP error messages
- interpreting, Changing master consoles
- AP help facility
- using, Using Access Port Commands
- AP informational messages
- interpreting, Changing master consoles
- AP. See access port , Resetting the system using the console
- APATH
- I/O Configurator command, Adding Objects in SYSGEN
- ASPROG
- SYSFILE configurator command, Displaying Current File Information, Adding file names to dump to tape
- autoboot and autosearch
- autoboot, Activating and Deactivating Autoboot and Autosearch Functions
- autosearch, Activating and Deactivating Autoboot and Autosearch Functions
- boot search, Activating and Deactivating Autoboot and Autosearch Functions
- manual, Activating and Deactivating Autoboot and Autosearch Functions
- AUTOBOOT command , Testing the System, Activating and Deactivating Autoboot and Autosearch Functions
- autoboot file, How system startup is carried out, Autobooting the system
- listing current contents, Listing autoboot file contents
- autoboot flag , Resetting the system using the console
- enabling and disabling, Activating and Deactivating Autoboot and Autosearch Functions
- autoboot images
- deleting, Deleting autoboot images
- replacing, Replacing autoboot images
- autobooting a Series 925 , Autobooting the system
- autobooting a system, How system startup is carried out
- autoexecute file, How system startup is carried out, Resetting the system using the console, Autobooting the system
- AUTOSEARCH command, Activating and Deactivating Autoboot and Autosearch Functions
- autosearch flag
- enabling and disabling, Activating and Deactivating Autoboot and Autosearch Functions
- AVOL
- I/O Configurator command, Adding Objects in SYSGEN
B- backing up the system, Backing up the system and retaining the current configuration, Using the INSTALL utility to recover a lost system, Back up the system and retain the current configuration, Using the System Generator (SYSGEN)
- base configuration group, Using the System Generator (SYSGEN)
- see configuration group, Using the System Generator (SYSGEN)
- base group
- specifying, Specifying the Base Group
- base system files, ISL Boot Utilities
- BASEGROUP
- SYSGEN command, Specifying the Base Group, Holding and Saving Configuration Changes, Adding a Peripheral to Any System
- basegroup, Using the System Generator (SYSGEN)
- see configuration group, Using the System Generator (SYSGEN)
- boot command options , Interrupting an autobooting system
- boot error codes , Interrupting an autobooting system
- boot images
- deleting, Deleting boot images
- replacing, Replacing boot images
- boot path
- CA module number for series 922-949 , Series 922 through Series 949 boot paths
- DA slot number for series 922-949 , Series 922 through Series 949 boot paths
- device address for series 922-949 , Series 922 through Series 949 boot paths
- improper , Interrupting an autobooting system
- boot paths , Resetting the system with the front panel switches, I/O paths used to boot a system
- alternate, I/O paths used to boot a system
- console, I/O paths used to boot a system
- primary, I/O paths used to boot a system
- boot tape, How System Configuration Is Performed, Using the System Generator (SYSGEN)
- boot utilities. See ISL utilities, ISL Boot Utilities
- booting sequences, How system startup is carried out
- booting the system , The Booting Process
- bus converter , Series 950 through Series 980 boot paths, Series 950 through Series 980 systems
C- CA module number , Series 922 through Series 949 boot paths
- cache, Displaying Configured Devices
- central bus, Selecting I/O paths
- see CTB, Selecting I/O paths
- central bus (CTB) , Series 922 through Series 949 boot paths, Series 950 through Series 980 boot paths
- changing the I/O configuration online, Using the IOCONFIG Utility
- channel adapter, Selecting I/O paths
- channel adapter (CA) , Series 922 through Series 949 boot paths, Series 950 through Series 980 boot paths
- channel I/O bus, Selecting I/O paths
- channel I/O bus (CIB) , Series 950 through Series 980 boot paths
- CIO bus, Selecting I/O paths
- classes
- adding in SYSGEN , Adding Objects in SYSGEN
- CLEAR
- LOG configurator command, Clearing Log Configuration Changes
- MISC configurator command, Clearing MISC Configuration Changes
- SYSGEN command, Using the System Generator (SYSGEN), Clearing Configuration Changes
- clearing configuration changes, Clearing Log Configuration Changes, Clearing MISC Configuration Changes
- SYSGEN utility, Clearing Configuration Changes
- CMSL, Displaying Current File Information
- adding a segment to, Adding a segment to the compatibility mode segmented library (CMSL)
- replacing a segment of, Replacing a CMSL segment
- see compatibility mode segment library, Displaying Current File Information
- co-processor, Displaying Configured Devices
- codes for ISL utility names, Reading Nonvolatile Memory (NVM)
- command interpreter
- using, Entering Control Mode and Using the Command Interpreter
- command syntax
- SYSGEN utility, SYSGEN Command Syntax
- commands
- I/O configurator, Viewing the current configuration
- commands - I/O Configurator
- ACLASS, Adding Objects in SYSGEN
- ADEV, Adding Objects in SYSGEN
- APATH, Adding Objects in SYSGEN
- AVOL, Adding Objects in SYSGEN
- DCLASS, Deleting Objects in SYSGEN
- DDEV, Deleting Objects in SYSGEN
- DPATH, Deleting Objects in SYSGEN
- DVOL, Deleting Objects in SYSGEN
- MADDRESS, Changing Configurations in SYSGEN
- MCLASS, Changing Configurations in SYSGEN
- MDEV, Changing Configurations in SYSGEN
- MPATH, Changing Configurations in SYSGEN
- MVOL, Changing Configurations in SYSGEN
- commands - I/O configurator
- HELP, Getting help with I/O Configurator commands
- LCLASS, Viewing the current configuration
- LDEV, Viewing the current configuration, I/O Configurator List Commands
- LPATH, Viewing the current configuration
- LVOL, Viewing the current configuration
- MADDRESS, Using I/O Configurator commands
- OCLOSE, Printing the configuration information
- commands - IO configurator
- ADEV, Adding Peripherals to a System, Adding a Peripheral to Any System
- APATH, Adding Peripherals to a System, Adding a Peripheral to Any System
- EXIT, Adding a Peripheral to Any System
- HOLD, Adding a Peripheral to Any System
- LCLASS, Adding a Peripheral to Any System
- LDEV, Adding a Peripheral to Any System
- LPATH, Adding a Peripheral to Any System
- OCLOSE, Adding a Peripheral to Any System
- commands - ISL
- IOMAP, Running IOMAP
- ODE, Running ODE
- START, Entering the SYSGEN Global Module, Adapting systems for fiber optic data links, Overview
- commands - LOG configurator
- CLEAR, Clearing Log Configuration Changes
- EXIT, Exiting the LOG Configurator
- HELP, Using the LOG Configurator Help Facility
- HOLD, Holding and Saving Configuration Changes
- OCLOSE, Showing Current LOG Values
- SHOW, Showing Current LOG Values
- SLOG, Logging System Events
- ULOG, Logging User Events
- commands - MISC configurator
- CLEAR, Clearing MISC Configuration Changes
- DRIN, Deleting Global Resource Identification Numbers (RIN)
- EXIT, Exiting the MISC Configurator
- help, Using the MISC Configurator Help Facility
- HOLD, Holding and Saving Configuration Changes
- JOB, Configuring Job-Related Limits
- LRIN, Displaying Allocated Global RINs
- OCLOSE, Displaying Allocated Global RINs
- RESOURCE, Setting Resource Allocations
- SESSION, Setting Session-Related Limits
- SHOW, Showing Values of Current Configurable Items
- STACK, Setting Sizes of Native Mode and Compatibility Mode Stacks
- SYSTEM, Setting Strings and String Parameters
- commands - MPE XL
- REPLY, Adding a Peripheral to Any System
- SHOWDEV, Adapting systems for fiber optic data links
- commands - MPE/iX
- ABORTJOB, Running IOMAP, Running ODE
- HELLO, Running IOMAP, Running ODE
- JOBFENCE, Running IOMAP, Running ODE
- LIMIT, Running IOMAP, Running ODE
- SHOWJOB, Running IOMAP, Running ODE
- TELL, Running IOMAP, Running ODE
- WARN, Running IOMAP, Running ODE
- commands - SYSFILE configurator
- AAUTO, Displaying Current File Information
- ABOOT, Displaying Current File Information, Adding boot files
- ACMSL, Displaying Current File Information, Adding a segment to the compatibility mode segmented library (CMSL)
- ASPROG, Displaying Current File Information, Adding file names to dump to tape
- DAUTO, Deleting Objects from the SYSGEN Tape, Deleting autoboot images
- DBOOT, Deleting Objects from the SYSGEN Tape, Deleting boot images
- DCMSL, Deleting Objects from the SYSGEN Tape, Deleting compatibility mode segments from a SYSGEN tape
- DSPROG, Deleting Objects from the SYSGEN Tape, Removing system programs from a SYSGEN tape
- help, Using the SYSFILE Configurator Help Facility
- RAUTO, Replacing Objects on the SYSGEN Tape
- RBOOT, Replacing Objects on the SYSGEN Tape, Replacing boot images
- RCAT, Replacing Objects on the SYSGEN Tape, Configuring a message catalog
- RCMSL, Replacing Objects on the SYSGEN Tape, Replacing a CMSL segment
- RDCC, Replacing Objects on the SYSGEN Tape, Replacing or defining a network configuration file
- RIPL, Replacing Objects on the SYSGEN Tape
- RNMLIB, Replacing Objects on the SYSGEN Tape
- RSPROG, Replacing Objects on the SYSGEN Tape
- SHOW, Displaying Current File Information
- commands - SYSGEN
- BASEGROUP, Specifying the Base Group, Holding and Saving Configuration Changes, Adding a Peripheral to Any System
- CLEAR, Using the System Generator (SYSGEN), Clearing Configuration Changes
- EXIT, Exiting SYSGEN
- HOLD, Saving Configuration Changes
- I/O, Using the SYSGEN I/O Configurator
- IO, Adding a Peripheral to Any System
- KEEP, Using the System Generator (SYSGEN), Saving Configuration Changes, Holding and Saving Configuration Changes, Holding and Saving Configuration Changes, Adding a Peripheral to Any System
- LOG, Entering the LOG Configurator
- MISC, Entering the MISC Configurator
- OCLOSE, Showing the State of Configurators, Generating a System Load Tape
- PERMYES, Confirming Potentially Serious Actions
- SHOW, Showing the State of Configurators
- SYSFILE, Entering the SYSFILE Configurator
- TAPE, Generating a System Load Tape, Adding a Peripheral to Any System
- commands in SYSSTART file, Executing commands during system startup
- commands, access port
- RS , Hard Reset
- TC , Soft Reset
- compatibility mode segment library, Displaying Current File Information
- see CMSL, Displaying Current File Information
- CONFIG
- UPDATE option, Using the UPDATE utility and options
- CONFIG group, Using the System Generator (SYSGEN)
- CONFIG.SYS, Using the UPDATE utility and options, Default Configurations Used by INSTALL and UPDATE
- configuration
- disk drives, Adding Peripherals to a System, Adding a Peripheral to Any System
- HP-FL, Adding Peripherals to a System, Adding a Peripheral to Any System
- HP-IB, Adding Peripherals to a System, Adding a Peripheral to Any System
- retaining current, Backing up the system and retaining the current configuration, Back up the system and retain the current configuration
- SCSI, Adding Peripherals to a System, Adding a Peripheral to Any System
- configuration changes
- clearing, Clearing Log Configuration Changes, Clearing MISC Configuration Changes
- holding, Holding and Saving Configuration Changes
- saving, Holding and Saving Configuration Changes
- configuration data, Using the System Generator (SYSGEN)
- account used to store, Using the System Generator (SYSGEN)
- erasing changes, Using the System Generator (SYSGEN)
- modifying, Modifying Input/Output (I/O) Configurations
- storing, How System Configuration Is Performed
- configuration files
- copying, Using SYSGEN to Copy the Files
- creating, Using the System Generator (SYSGEN)
- permanent, Using the System Generator (SYSGEN)
- temporary, Using the System Generator (SYSGEN)
- configuration group, Using the System Generator (SYSGEN)
- configuring a message catalog, Configuring a message catalog
- configuring job related limits, Configuring Job-Related Limits
- configuring local devices, Modifying Input/Output (I/O) Configurations
- configuring terminals, How System Configuration Is Performed
- configuring the console, Using the Access Port (AP)
- confirming potentially serious actions
- SYSGEN utility, Confirming Potentially Serious Actions
- console messages
- sending, Enabling Remote Console Access
- console mode
- returning from control mode, Using the AP Help Facility
- console path, I/O paths used to boot a system
- example , Resetting the system with the front panel switches
- constructing I/O paths, Selecting I/O paths
- control mode
- entering , Resetting the system using the console, Entering Control Mode and Using the Command Interpreter, Testing the AP
- control mode (CM) , Resetting the system using the console
- copying default configuration file groups, Copying Default Configuration File Groups
- creating configuration files, Using the System Generator (SYSGEN)
- CTB, Selecting I/O paths
- see central bus, Selecting I/O paths
- CTRL B, Resetting the system using the console
D- DAUTO
- SYSFILE configurator command, Deleting Objects from the SYSGEN Tape, Deleting autoboot images
- DBOOT
- SYSFILE configurator command, Deleting Objects from the SYSGEN Tape, Deleting boot images
- DCLASS
- I/O Configurator command, Deleting Objects in SYSGEN
- DCMSL
- SYSFILE configurator command, Deleting Objects from the SYSGEN Tape, Deleting compatibility mode segments from a SYSGEN tape
- DDEV
- I/O Configurator command, Deleting Objects in SYSGEN
- default configuration groups
- ALINE925, Default Configurations Used by INSTALL and UPDATE, Overview
- ALINK925, Default Configurations Used by INSTALL and UPDATE, Overview
- ALINK932, Default Configurations Used by INSTALL and UPDATE
- ALINK935, Default Configurations Used by INSTALL and UPDATE, Overview
- ALINK948, Default Configurations Used by INSTALL and UPDATE
- ALINK958, Default Configurations Used by INSTALL and UPDATE
- ALINK990, Default Configurations Used by INSTALL and UPDATE
- ALINK991, Default Configurations Used by INSTALL and UPDATE
- ALINK992, Default Configurations Used by INSTALL and UPDATE
- ALINK995, Default Configurations Used by INSTALL and UPDATE
- CONF9X71, Default Configurations Used by INSTALL and UPDATE
- CONF9X72, Default Configurations Used by INSTALL and UPDATE
- CONF9X73, Default Configurations Used by INSTALL and UPDATE
- CONF9X74, Default Configurations Used by INSTALL and UPDATE
- CONF9X75, Default Configurations Used by INSTALL and UPDATE
- CONFE925, Default Configurations Used by INSTALL and UPDATE, Overview
- CONFE950, Default Configurations Used by INSTALL and UPDATE, Overview
- CONFG920, Default Configurations Used by INSTALL and UPDATE
- CONFG922, Default Configurations Used by INSTALL and UPDATE
- CONFG925, Default Configurations Used by INSTALL and UPDATE, Overview
- CONFG932, Default Configurations Used by INSTALL and UPDATE
- CONFG935, Default Configurations Used by INSTALL and UPDATE, Overview
- CONFG948, Default Configurations Used by INSTALL and UPDATE
- CONFG950, Default Configurations Used by INSTALL and UPDATE, Overview
- CONFG958, Default Configurations Used by INSTALL and UPDATE
- CONFG990, Default Configurations Used by INSTALL and UPDATE
- CONFG991, Default Configurations Used by INSTALL and UPDATE
- CONFG992, Default Configurations Used by INSTALL and UPDATE
- CONFG995, Default Configurations Used by INSTALL and UPDATE
- CONFSCS0, Default Configurations Used by INSTALL and UPDATE
- default options
- INSTALL utility, Using the INSTALL utility and options
- START utility, Using START and its options
- UPDATE utility, Using the UPDATE utility and options
- defining a network configuration file, Replacing or defining a network configuration file
- defining system parameters, What Is System Configuration?
- deleting autoboot images, Deleting autoboot images
- deleting boot images, Deleting boot images
- deleting classes in SYSGEN, Deleting Objects in SYSGEN
- deleting compatibility mode segments from a SYSGEN tape , Deleting compatibility mode segments from a SYSGEN tape
- deleting devices in SYSGEN, Deleting Objects in SYSGEN
- deleting global resource identification numbers, Deleting Global Resource Identification Numbers (RIN)
- deleting I/O paths in SYSGEN, Deleting Objects in SYSGEN
- deleting objects from the SYSGEN tape, Deleting Objects from the SYSGEN Tape
- detecting system independent errors, Generating a System Load Tape
- determining I/O paths, Selecting I/O paths
- device adapter, Selecting I/O paths
- device adapter (DA) , Series 950 through Series 980 boot paths
- device adapter (DA) slot number , Series 922 through Series 949 boot paths
- device address, Series 922 through Series 949 systems
- devices
- listing , Series 950 through Series 980 boot paths, I/O Configurator List Commands
- verifying, Verifying Attached Devices
- disk boots, Initial System Loader (ISL)
- displaying autoboot and autosearch settings, Displaying current boot path, autoboot, and autosearch settings
- displaying current file information, Displaying Current File Information
- displaying fastsize value, Displaying current boot path, autoboot, and autosearch settings
- displaying local RINs, Displaying Allocated Global RINs
- displaying state of configurators
- SYSGEN utility, Showing the State of Configurators
- DPATH
- I/O Configurator command, Deleting Objects in SYSGEN
- DRIN
- MISC configurator command, Deleting Global Resource Identification Numbers (RIN)
- DSPROG
- SYSFILE configurator command, Deleting Objects from the SYSGEN Tape, Removing system programs from a SYSGEN tape
- DUMP, Soft Reset
- dump listing, Startup, Dump, and Shutdown Listings
- DUMP sequence, START Sequence
- DUMP utility, ISL Boot Utilities, What is the function of the DUMP utility?, Using the DUMP utility and options
- default options, Using the DUMP utility and options
- SUBSET option, Using the DUMP utility and options
- DUMPAREA, Initial System Loader (ISL)
- dumping a system, ISL Boot Utilities
- DVOL
- I/O Configurator command, Deleting Objects in SYSGEN
E- enabling and disabling the autoboot flag, Activating and Deactivating Autoboot and Autosearch Functions
- enabling and disabling the autosearch flag, Activating and Deactivating Autoboot and Autosearch Functions
- entering an MPE command from the LOG configurator , Entering an MPE Command from the LOG Configurator
- entering an MPE command from the MISC configurator , Entering an MPE Command from the MISC Configurator
- entering IOMAP, Running IOMAP
- entering ODE, Running ODE
- entering the I/O configurator, Using the SYSGEN I/O Configurator
- entering the LOG configurator, Entering the LOG Configurator
- entering the MISC configurator, Entering the MISC Configurator
- entering the SYSFILE configurator, Entering the SYSFILE Configurator
- entering the SYSGEN global module, Entering the SYSGEN Global Module
- erasing configuration changes, Using the System Generator (SYSGEN)
- error codes, Interpreting AP Error and Informational Messages
- error messages, Interpreting AP Error and Informational Messages
- escape characters
- entering, Allowing scrolling
- EXIT
- LOG configurator command, Exiting the LOG Configurator
- MISC configurator command, Exiting the MISC Configurator
- SYSGEN command, Exiting SYSGEN
- exiting IOMAP, Exiting IOMAP
- exiting MAPPER, Exiting MAPPER
- exiting MODE, Exiting ODE
- exiting SYSGEN, Exiting SYSGEN
- exiting the LOG configurator, Exiting the LOG Configurator
- exiting the MISC configurator, Exiting the MISC Configurator
F- fastsize, Using initial system loader (ISL) commands, Displaying current boot path, autoboot, and autosearch settings
- file information
- displaying, Displaying Current File Information
- first level commands, using, Using First-Level (Global Module) Commands
- first-time installation, Installing the Operating System, Installing the operating system: a preview
- formal file designators
- $STDINX, Entering the SYSGEN Global Module
- $STDLIST, Entering the SYSGEN Global Module
- SYSGIN, Entering the SYSGEN Global Module
- SYSGOUT, Entering the SYSGEN Global Module
- full system backup , Using the System Generator (SYSGEN)
H- halting commands
- SYSGEN utility, Halting SYSGEN Command Actions
- halting SYSGEN command actions, Halting SYSGEN Command Actions
- hard reset , Hard Reset, Resetting the system using the console
- hardware clock, Reading and setting the hardware clock
- HELLO
- MPE/iX command, Running IOMAP, Running ODE
- HELP facility
- LOG configurator, Using the LOG Configurator Help Facility
- help facility
- I/O configurator, Getting help with I/O Configurator commands
- MISC configurator, Using the MISC Configurator Help Facility
- SYSFILE configurator, Using the SYSFILE Configurator Help Facility
- SYSGEN global module, Using the Help Facility in SYSGEN's Global Module
- Hewlett-Packard Fiber-optic Link, Adding Peripherals to a System
- Hewlett-Packard Interface Bus, Adding Peripherals to a System
- HOLD
- LOG configurator command, Holding and Saving Configuration Changes
- MISC configurator command, Holding and Saving Configuration Changes
- SYSGEN command, Saving Configuration Changes
- holding configuration changes, Saving Configuration Changes, Holding and Saving Configuration Changes, Holding and Saving Configuration Changes
- HP-FL, Adding Peripherals to a System
- HP-IB, Adding Peripherals to a System
I- I/O
- SYSGEN command, Using the SYSGEN I/O Configurator
- I/O configuration
- modifying, Modifying Input/Output (I/O) Configurations
- I/O configuration changes
- online, Using the IOCONFIG Utility
- I/O configurator, Modifying Input/Output (I/O) Configurations
- help facility, Getting help with I/O Configurator commands
- I/O Configurator commands
- ACLASS, Adding Objects in SYSGEN
- ADEV, Adding Objects in SYSGEN
- APATH, Adding Objects in SYSGEN
- AVOL, Adding Objects in SYSGEN
- DCLASS, Deleting Objects in SYSGEN
- DDEV, Deleting Objects in SYSGEN
- DPATH, Deleting Objects in SYSGEN
- DVOL, Deleting Objects in SYSGEN
- MADDRESS, Changing Configurations in SYSGEN
- MCLASS, Changing Configurations in SYSGEN
- MDEV, Changing Configurations in SYSGEN
- MPATH, Changing Configurations in SYSGEN
- MVOL, Changing Configurations in SYSGEN
- I/O configurator commands
- HELP, Getting help with I/O Configurator commands
- LCLASS, Viewing the current configuration
- LDEV, Viewing the current configuration, I/O Configurator List Commands
- LPATH, Viewing the current configuration
- LVOL, Viewing the current configuration
- MADDRESS, Using I/O Configurator commands
- OCLOSE, Printing the configuration information
- I/O path
- alternate boot path , Determining and Selecting Input and Output (I/O) Paths
- console boot path , Determining and Selecting Input and Output (I/O) Paths
- definition , Determining and Selecting Input and Output (I/O) Paths
- primary boot paths , Determining and Selecting Input and Output (I/O) Paths
- I/O paths, Resetting the system with the front panel switches
- determining, Selecting I/O paths
- series 922-949 , Series 922 through Series 949 boot paths
- identify test, Displaying Configured Devices
- informational messages, Interpreting AP Error and Informational Messages
- initial program load (IPL), Initiating System Activity, Testing the System
- initial system loader, Initiating System Activity, Entering the SYSGEN Global Module
- input/output (I/O) configurator, Modifying Input/Output (I/O) Configurations
- input/output (IO) configurator, Using the System Generator (SYSGEN)
- input/output dependent code (IODC), Initiating System Activity, The Booting Process, System Startup Functions
- INSTALL, Soft Reset
- ISL utility , Overview
- using to recover system, Using the INSTALL utility to recover a lost system
- INSTALL options, Using the INSTALL utility and options
- INSTALL utility, ISL Boot Utilities, Installing the Operating System, Default Configurations Used by INSTALL and UPDATE
- installing the operating system, Installing the Operating System
- preliminary steps, Installing the operating system: a preview
- required steps, Installing the operating system: a preview
- interactively booting a system, How system startup is carried out
- interrupting AUTOBOOT , Interrupting an autobooting system
- IO
- SYSGEN command, Adding a Peripheral to Any System
- IO configurator commands
- ADEV, Adding Peripherals to a System, Adding a Peripheral to Any System
- APATH, Adding Peripherals to a System, Adding a Peripheral to Any System
- EXIT, Adding a Peripheral to Any System
- HOLD, Adding a Peripheral to Any System
- LCLASS, Adding a Peripheral to Any System
- LDEV, Adding a Peripheral to Any System
- LPATH, Adding a Peripheral to Any System
- OCLOSE, Adding a Peripheral to Any System
- IOCONFIG Utility, Using the IOCONFIG Utility
- IODC, I/O paths used to boot a system
- see I/O dependent code, I/O paths used to boot a system
- IODC See input/output dependent code, Initiating System Activity
- IOMAP
- exiting, Exiting IOMAP
- functions, Displaying Configured Devices
- ISL command, Running IOMAP
- ISL utility, Overview
- IOMAP utility, Adapting systems for fiber optic data links
- activating, Running IOMAP
- IPL. See initial program load, Initiating System Activity
- ISL, Initiating System Activity, Soft Reset, Resetting the system using the console, Initial System Loader (ISL), Activating and Deactivating Autoboot and Autosearch Functions
- ALTPATH, Using initial system loader (ISL) commands, Modifying boot paths in stable storage
- AUTOBOOT , Autobooting the system, Using initial system loader (ISL) commands
- AUTOSEARCH, Using initial system loader (ISL) commands
- boot utilities, Entering the DUMP utility and starting the system
- CLKUTIL, Reading and setting the hardware clock
- commands, System Startup Functions
- CONSPATH, Using initial system loader (ISL) commands, Modifying boot paths in stable storage
- defined, How system startup is carried out
- DISPLAY, Using initial system loader (ISL) commands, Displaying current boot path, autoboot, and autosearch settings
- DUMP, ISL Boot Utilities, What is the function of the DUMP utility?, Entering the DUMP utility and starting the system
- flag status, Activating and Deactivating Autoboot and Autosearch Functions
- HELP, Using initial system loader (ISL) commands
- INSTALL, ISL Boot Utilities, Installing the Operating System, Default Configurations Used by INSTALL and UPDATE
- IOMAP , Series 950 through Series 980 boot paths, Displaying current boot path, autoboot, and autosearch settings
- LISTAUTOFL, Using initial system loader (ISL) commands, Listing autoboot file contents
- LISTF, Using initial system loader (ISL) commands, Listing Available ISL Utilities
- LS, Using initial system loader (ISL) commands
- LSAUTOFL, Using initial system loader (ISL) commands, Listing autoboot file contents
- options, System Startup Functions
- PRIMPATH, Using initial system loader (ISL) commands, Modifying boot paths in stable storage
- READNVM, Using initial system loader (ISL) commands, Reading Nonvolatile Memory (NVM)
- READSS, Using initial system loader (ISL) commands, Reading stable storage
- see initial system loader, Entering the SYSGEN Global Module
- START, Starting the System, Default Configurations Used by INSTALL and UPDATE
- UPDATE, ISL Boot Utilities, The ISL utility
- utilities, How system startup is carried out, System Startup Functions
- utility options, ISL Summary
- ISL commands
- IOMAP, Running IOMAP
- ODE, Running ODE
- START, Entering the SYSGEN Global Module, Adapting systems for fiber optic data links, Overview
- ISL HELP facility
- using, Using the help facility for ISL commands
- ISL settings
- example, Displaying current boot path, autoboot, and autosearch settings
- series 950-980, Listing autoboot file contents
- ISL utilities
- INSTALL, Overview
- IOMAP, Adapting systems for fiber optic data links, Overview
- listing, Listing Available ISL Utilities
- START, Using the System Generator (SYSGEN)
- UPDATE, Overview
- ISL utility, Soft Reset
- ISL utility names
- codes for, Reading Nonvolatile Memory (NVM)
L- LCLASS
- I/O configurator command, Viewing the current configuration
- IO configurator command, Adding a Peripheral to Any System
- LDEV
- I/O configurator command, Viewing the current configuration, I/O Configurator List Commands
- IO configurator command, Adding a Peripheral to Any System
- LDEV number, I/O Configurator List Commands
- see logical device number, I/O Configurator List Commands
- LIF. See logical interchange format , Autobooting the system
- LIMIT
- MPE/iX command, Running IOMAP, Running ODE
- LIMIT command, Limiting System Use
- limits
- configuring job related, Configuring Job-Related Limits
- setting session related, Setting Session-Related Limits
- listing autoboot and autosearch settings , Displaying current boot path, autoboot, and autosearch settings
- listing classes, Viewing the current configuration
- listing devices , Series 950 through Series 980 boot paths, Viewing the current configuration, I/O Configurator List Commands
- listing paths, Viewing the current configuration
- listing RINS, Displaying Allocated Global RINs
- listing volumes, Viewing the current configuration
- LISTSPF command, Shutting the Spool Queues and Handling the Remaining Reports
- load listing, Startup, Dump, and Shutdown Listings
- loading a system, ISL Boot Utilities
- local devices
- configuring, Modifying Input/Output (I/O) Configurations
- LOG
- SYSGEN command, Entering the LOG Configurator
- LOG configurator, Modifying Logging Configurations
- entering an MPE command from, Entering an MPE Command from the LOG Configurator
- exiting, Exiting the LOG Configurator
- HELP facility, Using the LOG Configurator Help Facility
- see logging configurator, Modifying Logging Configurations
- LOG configurator commands
- CLEAR, Clearing Log Configuration Changes
- EXIT, Exiting the LOG Configurator
- HELP, Using the LOG Configurator Help Facility
- HOLD, Holding and Saving Configuration Changes
- OCLOSE, Showing Current LOG Values
- SHOW, Showing Current LOG Values
- SLOG, Logging System Events
- ULOG, Logging User Events
- LOG values
- showing, Showing Current LOG Values
- logging
- system, Modifying Logging Configurations
- user, Modifying Logging Configurations
- logging (LOG) configurator, Using the System Generator (SYSGEN), Modifying Logging Configurations
- see LOG configurator, Using the System Generator (SYSGEN), Modifying Logging Configurations
- logical device number
- see LDEV number, I/O Configurator List Commands
- logical interchange format (LIF) , Autobooting the system
- logical interface format (LIF), Initial System Loader (ISL)
- loopback test, Displaying Configured Devices
- LPATH
- I/O configurator command, Viewing the current configuration
- IO configurator command, Adding a Peripheral to Any System
- LRIN
- MISC configurator command, Displaying Allocated Global RINs
- LVOL
- I/O configurator command, Viewing the current configuration
M- MADDRESS
- I/O Configurator command, Changing Configurations in SYSGEN
- I/O configurator command, Using I/O Configurator commands
- MAPPER
- exiting, Exiting MAPPER
- master consoles
- changing, Entering escape characters
- MCLASS
- I/O Configurator command, Changing Configurations in SYSGEN
- MDEV
- I/O Configurator command, Changing Configurations in SYSGEN
- message catalog
- configuring, Configuring a message catalog
- mid bus, Series 950 through Series 980 systems
- MISC
- SYSGEN command, Entering the MISC Configurator
- MISC configurator, Modifying Miscellaneous Configuration Elements
- entering an MPE command from, Entering an MPE Command from the MISC Configurator
- exiting, Exiting the MISC Configurator
- help facility, Using the MISC Configurator Help Facility
- see miscellaneous configurator, Modifying Miscellaneous Configuration Elements
- MISC configurator command
- CLEAR, Clearing MISC Configuration Changes
- EXIT, Exiting the MISC Configurator
- HOLD, Holding and Saving Configuration Changes
- JOB, Configuring Job-Related Limits
- LRIN, Displaying Allocated Global RINs
- OCLOSE, Displaying Allocated Global RINs
- RESOURCE, Setting Resource Allocations
- SESSION, Setting Session-Related Limits
- STACK, Setting Sizes of Native Mode and Compatibility Mode Stacks
- SYSTEM, Setting Strings and String Parameters
- MISC configurator commands
- DRIN, Deleting Global Resource Identification Numbers (RIN)
- help, Using the MISC Configurator Help Facility
- SHOW, Showing Values of Current Configurable Items
- miscellaneous (MISC) configurator, Using the System Generator (SYSGEN), Modifying Miscellaneous Configuration Elements
- see MISC configurator, Using the System Generator (SYSGEN), Modifying Miscellaneous Configuration Elements
- MMSAVE, System Startup Functions, Initial System Loader (ISL)
- modifying addresses in SYSGEN , Changing Configurations in SYSGEN
- modifying classes in SYSGEN , Changing Configurations in SYSGEN
- modifying devices in SYSGEN , Changing Configurations in SYSGEN
- modifying I/O configurations, Modifying Input/Output (I/O) Configurations
- modifying paths in SYSGEN , Changing Configurations in SYSGEN
- modifying system parameters, What Is System Configuration?
- MPATH
- I/O Configurator command, Changing Configurations in SYSGEN
- MPE XL commands
- REPLY, Adding a Peripheral to Any System
- SHOWDEV, Adapting systems for fiber optic data links
- MPE XL utilities
- SYSGEN, Using SYSGEN to Copy the Files
- MPE/iX commands
- ABORTJOB, Running IOMAP, Running ODE
- HELLO, Running IOMAP, Running ODE
- JOBFENCE, Running IOMAP, Running ODE
- LIMIT, Running IOMAP, Running ODE
- SHOWJOB, Running IOMAP, Running ODE
- TELL, Running IOMAP, Running ODE
- WARN, Running IOMAP, Running ODE
- MVOL
- I/O Configurator command, Changing Configurations in SYSGEN
N- NETCONTROL command, Closing Any Open Communication Lines
- network configuration file
- defining, Replacing or defining a network configuration file
- replacing, Replacing or defining a network configuration file
- NOCONFIG
- UPDATE option, Using the UPDATE utility and options
- nonvolatile memory (NVM), Reading Nonvolatile Memory (NVM), Reading Stable Storage Contents
- NOSTART
- INSTALL option, Using the INSTALL utility and options
- UPDATE option, Using the UPDATE utility and options
- NSCONTROL command, Closing Any Open Communication Lines
- NVM. See nonvolatile memory, Reading Nonvolatile Memory (NVM)
O- OCLOSE
- I/O configurator command, Printing the configuration information
- IO configurator command, Adding a Peripheral to Any System
- LOG configurator command, Showing Current LOG Values
- MISC configurator command, Displaying Allocated Global RINs
- SYSGEN command, Showing the State of Configurators, Generating a System Load Tape
- ODE
- exiting, Exiting ODE
- ISL command, Running ODE
- ODE utility
- activating, Running ODE
- Online device configuration, Using the IOCONFIG Utility
P- path information
- stable storage, Modifying boot paths in stable storage
- PDC, I/O paths used to boot a system, Displaying Configured Devices
- see processor dependent code, I/O paths used to boot a system
- PDC See processor dependent code, Initiating System Activity
- peripheral devices
- defined, What Is System Configuration?
- permanent configuration files, Using the System Generator (SYSGEN)
- PERMYES
- SYSGEN command, Confirming Potentially Serious Actions
- PERMYES in batch mode, Redirecting SYSGEN Input and Output
- PERMYES in command files, Redirecting SYSGEN Input and Output
- positional parameters
- SYSGEN utility, SYSGEN Command Syntax
- primary boot paths, I/O paths used to boot a system
- example, Resetting the system with the front panel switches
- processor dependent code (PDC), Initiating System Activity, The Booting Process, System Startup Functions, Initial System Loader (ISL)
- processor test
- series 950-980 , Testing the System
R- RAUTO
- SYSFILE configurator command, Replacing Objects on the SYSGEN Tape
- RBOOT
- SYSFILE configurator command, Replacing Objects on the SYSGEN Tape, Replacing boot images
- RCAT
- SYSFILE configurator command, Replacing Objects on the SYSGEN Tape, Configuring a message catalog
- RCMSL
- SYSFILE configurator command, Replacing Objects on the SYSGEN Tape, Replacing a CMSL segment
- RDCC
- SYSFILE configurator command, Replacing Objects on the SYSGEN Tape, Replacing or defining a network configuration file
- re-installation, Installing the Operating System
- recovery, system failure, The ISL utility, Updating to recover from system failure: a preview, Installing the Operating System
- redirecting SYSGEN input and output, Redirecting SYSGEN Input and Output
- reload (INSTALL), Installing the Operating System
- remote console
- disabling access, Sending Messages to Both Consoles
- enabling access, Configuring the Access Port
- remote line
- disconnecting, Disabling Remote Console Access
- remote support modem
- connecting to a session port, Disconnecting the Remote Line
- removing configuration changes, Clearing Configuration Changes
- removing system programs from a SYSGEN tape, Removing system programs from a SYSGEN tape
- repeated parameters
- SYSGEN utility, SYSGEN Command Syntax
- replacing a CMSL segment, Replacing a CMSL segment
- replacing a network configuration file, Replacing or defining a network configuration file
- replacing autoboot images, Replacing autoboot images
- replacing boot images, Replacing boot images
- replacing objects on the SYSGEN tape, Replacing Objects on the SYSGEN Tape
- replacing operating system, The ISL utility
- REPLY
- MPE XL command, Adding a Peripheral to Any System
- reset , Resetting the system using the console
- reset button
- series 950-980 , Resetting the system with the front panel switches
- RESET buttons, Resetting the system with the front panel switches
- reset switch
- series 922 through 949, Resetting the system with the front panel switches
- resetting a series 922-949, Resetting the system with the front panel switches
- resetting a series 950-980, Resetting the system with the front panel switches
- resetting Series 949 systems (example)
- autoboot enabled , Resetting the system with the front panel switches
- resetting the system , Resetting the System, Resetting the system using the console, Resetting the system with the front panel switches
- hard reset , Resetting the System
- soft reset , Resetting the System
- via the front panel switches, Resetting the system with the front panel switches
- RESOURCE
- MISC configurator command, Setting Resource Allocations
- resource allocations
- setting, Setting Resource Allocations
- resource identification numbers
- deleting, Deleting Global Resource Identification Numbers (RIN)
- see RIN, Deleting Global Resource Identification Numbers (RIN)
- resources
- allocating, Setting Resource Allocations
- retaining current configuration, Backing up the system and retaining the current configuration, Back up the system and retain the current configuration
- RIN, Deleting Global Resource Identification Numbers (RIN)
- listing, Displaying Allocated Global RINs
- see resource identification numbers, Deleting Global Resource Identification Numbers (RIN)
- RIPL
- SYSFILE configurator command, Replacing Objects on the SYSGEN Tape
- RNMLIB
- SYSFILE configurator command, Replacing Objects on the SYSGEN Tape
- RS, Resetting the system using the console
- access port command , Hard Reset
- hard reset , Hard Reset
- RSPROG
- SYSFILE configurator command, Replacing Objects on the SYSGEN Tape
S- saving configuration changes, Saving Configuration Changes, Holding and Saving Configuration Changes, Holding and Saving Configuration Changes
- scheduling an INSTALL, Scheduling an INSTALL
- scheduling an UPDATE, Scheduling a System Update
- scripting PERMYES, Redirecting SYSGEN Input and Output
- scrolling
- allowing, Halting scrolling
- halting, Entering control mode
- SCSI, Adding Peripherals to a System
- self-test, Hard Reset, Displaying Configured Devices
- series 922-949 , Testing the System
- series 950-980 , Testing the System
- Series 920
- default configuration, Default Configurations Used by INSTALL and UPDATE
- Series 922
- default configuration, Default Configurations Used by INSTALL and UPDATE
- Series 922-949, Resetting the system with the front panel switches
- Series 922LX
- default configuration, Default Configurations Used by INSTALL and UPDATE
- Series 922RX
- default configuration, Default Configurations Used by INSTALL and UPDATE
- Series 925
- default configuration, Default Configurations Used by INSTALL and UPDATE
- Series 925LX
- default configuration, Default Configurations Used by INSTALL and UPDATE
- Series 932
- default configuration, Default Configurations Used by INSTALL and UPDATE
- Series 935
- default configuration, Default Configurations Used by INSTALL and UPDATE
- Series 948
- default configuration, Default Configurations Used by INSTALL and UPDATE
- Series 949
- default configuration, Default Configurations Used by INSTALL and UPDATE
- Series 950
- default configuration, Default Configurations Used by INSTALL and UPDATE
- Series 950-980, Resetting the system with the front panel switches
- Series 958
- default configuration, Default Configurations Used by INSTALL and UPDATE
- Series 960
- default configuration, Default Configurations Used by INSTALL and UPDATE
- Series 980
- default configuration, Default Configurations Used by INSTALL and UPDATE
- Series 990
- default configuration, Default Configurations Used by INSTALL and UPDATE
- Series 991
- default configuration, Default Configurations Used by INSTALL and UPDATE
- Series 992
- default configuration, Default Configurations Used by INSTALL and UPDATE
- Series 995
- default configuration, Default Configurations Used by INSTALL and UPDATE
- Series 9X7
- default configuration, Default Configurations Used by INSTALL and UPDATE
- SESSION
- MISC configurator command, Setting Session-Related Limits
- sessions
- setting related limits, Setting Session-Related Limits
- setting resource allocations, Setting Resource Allocations
- setting session related limits, Setting Session-Related Limits
- setting sizes of native mode and compatibility mode stacks , Setting Sizes of Native Mode and Compatibility Mode Stacks
- setting strings and string parameters, Setting Strings and String Parameters
- SHOW
- LOG configurator command, Showing Current LOG Values
- MISC configurator command, Showing Values of Current Configurable Items
- SYSFILE configurator command, Displaying Current File Information
- SYSGEN command, Showing the State of Configurators
- SHOWDEV
- MPE XL command, Adapting systems for fiber optic data links
- SHOWDEV command, Shutting the Spool Queues and Handling the Remaining Reports
- showing current file information, Displaying Current File Information
- showing current LOG values, Showing Current LOG Values
- showing the state of configurators, Showing the State of Configurators
- showing values of current configurable items, Showing Values of Current Configurable Items
- SHOWJOB
- MPE/iX command, Running IOMAP, Running ODE
- shutdown
- abbreviated list of steps, How system shutdown is carried out
- definition, What Is System Shutdown?
- SHUTDOWN command, How system shutdown is carried out, Shutting Down the System
- shutdown listing, Startup, Dump, and Shutdown Listings
- shutdown sequence, DUMP Sequence
- SHUTQ command, Shutting the Spool Queues and Handling the Remaining Reports
- shutting down the system, How system shutdown is carried out
- SLOG
- LOG configurator command, Logging System Events
- slot number, Series 922 through Series 949 systems
- SLT, Generating a System Load Tape, Overview
- see system load tape, Overview
- Small Computer System Interface, Adding Peripherals to a System
- soft reset , Soft Reset, Resetting the system using the console, Hard Resetting the SPU
- soft reset. See also TC , Soft Reset
- software clock, Reading and setting the hardware clock
- specifying the base group, Specifying the Base Group
- spool queues
- shutting, Shutting the Spool Queues and Handling the Remaining Reports
- SPU hex status display
- disabling, Enabling the SPU Hex Status Display
- enabling, Connecting the Remote Support Modem to a Session Port
- stable storage, Modifying boot paths in stable storage
- contents, Reading Stable Storage Contents
- reading, Reading stable storage, Reading Stable Storage and Nonvolatile Memory
- STACK
- MISC configurator command, Setting Sizes of Native Mode and Compatibility Mode Stacks
- stacks
- setting sizes of compatibility mode, Setting Sizes of Native Mode and Compatibility Mode Stacks
- setting sizes of native mode, Setting Sizes of Native Mode and Compatibility Mode Stacks
- START
- INSTALL option, Using the INSTALL utility and options
- ISL command, Entering the SYSGEN Global Module, Adapting systems for fiber optic data links, Overview
- ISL utility, Using the System Generator (SYSGEN)
- UPDATE option, Using the UPDATE utility and options
- START listing, Startup, Dump, and Shutdown Listings
- START options, Using START and its options
- START sequence, Startup, Dump, and Shutdown Listings
- START utility, Starting the System
- starting a system, ISL Boot Utilities
- startup
- abbreviated list of steps, How system startup is carried out
- autoboot vs. interactive, How system startup is carried out
- definition, What Is System Startup?
- overview<\IDX>, Initiating System Activity
- startup listing, Startup, Dump, and Shutdown Listings
- status line display, Interpreting the System Status Line
- strings
- setting, Setting Strings and String Parameters
- strings parameters
- setting, Setting Strings and String Parameters
- subparameters
- SYSGEN utility, SYSGEN Command Syntax
- support, Using initial system loader (ISL) commands
- SYS account, Using the System Generator (SYSGEN)
- SYSFILE
- SYSGEN command, Entering the SYSFILE Configurator
- SYSFILE configurator, Generating a System Load Tape, Modifying System File Configurations
- entering, Entering the SYSFILE Configurator
- help facility, Using the SYSFILE Configurator Help Facility
- see system file configurator , Modifying System File Configurations
- SYSFILE configurator commands
- AAUTO, Displaying Current File Information
- ABOOT, Displaying Current File Information, Adding boot files
- ACMSL, Displaying Current File Information, Adding a segment to the compatibility mode segmented library (CMSL)
- ASPROG, Displaying Current File Information, Adding file names to dump to tape
- DAUTO, Deleting Objects from the SYSGEN Tape, Deleting autoboot images
- DBOOT, Deleting Objects from the SYSGEN Tape, Deleting boot images
- DCMSL, Deleting Objects from the SYSGEN Tape, Deleting compatibility mode segments from a SYSGEN tape
- DSPROG, Deleting Objects from the SYSGEN Tape, Removing system programs from a SYSGEN tape
- he,p, Using the SYSFILE Configurator Help Facility
- RAUTO, Replacing Objects on the SYSGEN Tape
- RBOOT, Replacing Objects on the SYSGEN Tape, Replacing boot images
- RCAT, Replacing Objects on the SYSGEN Tape, Configuring a message catalog
- RCMSL, Replacing Objects on the SYSGEN Tape, Replacing a CMSL segment
- RDCC, Replacing Objects on the SYSGEN Tape, Replacing or defining a network configuration file
- RIPL, Replacing Objects on the SYSGEN Tape
- RNMLIB, Replacing Objects on the SYSGEN Tape
- RSPROG, Replacing Objects on the SYSGEN Tape
- SHOW, Displaying Current File Information
- SYSGEN, Backing up the system and retaining the current configuration, Back up the system and retain the current configuration, Default Configurations Used by INSTALL and UPDATE
- I/O map, Displaying current boot path, autoboot, and autosearch settings
- SYSGEN commands
- BASEGROUP, Specifying the Base Group, Holding and Saving Configuration Changes, Adding a Peripheral to Any System
- CLEAR, Using the System Generator (SYSGEN), Clearing Configuration Changes
- EXIT, Exiting SYSGEN
- halting, Halting SYSGEN Command Actions
- HOLD, Saving Configuration Changes
- I/O, Using the SYSGEN I/O Configurator
- IO, Adding a Peripheral to Any System
- KEEP, Using the System Generator (SYSGEN), Saving Configuration Changes, Holding and Saving Configuration Changes, Holding and Saving Configuration Changes, Adding a Peripheral to Any System
- LOG, Entering the LOG Configurator
- MISC, Entering the MISC Configurator
- OCLOSE, Showing the State of Configurators, Generating a System Load Tape
- PERMYES, Confirming Potentially Serious Actions
- SHOW, Showing the State of Configurators
- SYSFILE, Entering the SYSFILE Configurator
- TAPE, Generating a System Load Tape, Adding a Peripheral to Any System
- SYSGEN global module
- help facility, Using the Help Facility in SYSGEN's Global Module
- SYSGEN IO configurator
- LPATH command , Series 950 through Series 980 boot paths
- SYSGEN tape
- deleting compatibility mode segments from , Deleting compatibility mode segments from a SYSGEN tape
- deleting objects from, Deleting Objects from the SYSGEN Tape
- placing objects on, Replacing Objects on the SYSGEN Tape
- removing system programs from, Removing system programs from a SYSGEN tape
- SYSGEN Utility
- command syntax, SYSGEN Command Syntax
- SYSGEN utility, How System Configuration Is Performed, Using SYSGEN to Copy the Files
- activating, Entering the SYSGEN Global Module
- activating the configurators, Activating the Configurators
- clearing configuration changes, Clearing Configuration Changes
- confirming serious actions, Confirming Potentially Serious Actions
- displaying state of configurators, Showing the State of Configurators
- entering the I/O configurator, Using the SYSGEN I/O Configurator
- entering the LOG configurator, Entering the LOG Configurator
- exiting, Exiting SYSGEN
- generating a boot tape, Generating a System Load Tape
- global module, Using the System Generator (SYSGEN)
- halting commands, Halting SYSGEN Command Actions
- holding configuration changes, Saving Configuration Changes
- keyword parameters, SYSGEN Command Syntax
- positional parameters, SYSGEN Command Syntax
- redirecting input and output, Redirecting SYSGEN Input and Output
- repeated parameters, SYSGEN Command Syntax
- saving configuration changes, Saving Configuration Changes
- subparameters, SYSGEN Command Syntax
- SYSFILE configurator, Generating a System Load Tape
- using first level commands, Using First-Level (Global Module) Commands
- SYSGIN
- formal file designator, Entering the SYSGEN Global Module
- SYSGOUT
- formal file designator, Entering the SYSGEN Global Module
- SYSMAP, Displaying current boot path, autoboot, and autosearch settings
- SYSSTART file, Executing commands during system startup
- example, Executing commands during system startup
- SYSSTART file modules, Executing commands during system startup
- SYSTEM
- MISC configurator command, Setting Strings and String Parameters
- system configuration
- adding a disk drive, Adding Peripherals to a System, Adding a Peripheral to Any System
- defined, What Is System Configuration?
- disk drives, Adding Peripherals to a System, Adding a Peripheral to Any System
- PSEUDO id for SCSI interface, SCSI Devices
- series 917LX through 977, Series 917LX through Series 977 Systems, Unit Identifier
- series 920 through 949 CIO, Series 920, 922, 932, 948, 958, 925, 935, 949 CIO Systems, Unit Identifier
- series 920 through 958 NIO, Series 920, 922, 932, 948, 958 NIO Systems, Unit Identifier
- series 950 through 980, Series 950 Through Series 980 Systems, Adding a Peripheral to Any System
- system dependent errors, Generating a System Load Tape
- system failure
- recovery from, The ISL utility, Updating to recover from system failure: a preview, Installing the Operating System
- system file (SYSFILE) configurator, Using the System Generator (SYSGEN), Modifying System File Configurations
- see SYSFILE configurator, Using the System Generator (SYSGEN), Modifying System File Configurations
- system generator (SYSGEN) utility
- see SYSGEN utility, How System Configuration Is Performed
- system independent errors, Generating a System Load Tape
- system initialization, I/O paths used to boot a system
- system load, ISL Boot Utilities
- system load tape, Overview
- see SLT, Overview
- system load tape (SLT), Default Configurations Used by INSTALL and UPDATE
- system logging, Modifying Logging Configurations, Logging System Events
- system main bus (SMB) , Series 950 through Series 980 boot paths
- system parameters
- defining, What Is System Configuration?
- modifying, What Is System Configuration?
- system reload (INSTALL), Installing the Operating System
- system shutdown
- overview, Halting System Activity
- system shutdown. See shutdown, How system shutdown is carried out
- system startup. See startup, How system startup is carried out
- system status line
- interpreting, Entering Control Mode and Using the Command Interpreter
- system testing, Displaying Configured Devices
- identify, Displaying Configured Devices
- loopback, Displaying Configured Devices
- self-test, Displaying Configured Devices
T- TAPE
- SYSGEN command, Generating a System Load Tape, Adding a Peripheral to Any System
- tape boots, Initial System Loader (ISL)
- TC, Soft Reset, Resetting the system using the console
- access port command , Soft Reset
- See also transfer of control , Soft Reset
- soft reset , Soft Reset
- TELL command, Telling Users about the Shutdown, Running IOMAP, Running ODE
- temporary configuration files, Using the System Generator (SYSGEN)
- terminals
- configuring, How System Configuration Is Performed
- testing the access port, Transferring Control (Soft Reset)
- TLB, Displaying Configured Devices
- see translation look aside buffer (TLB), Displaying Configured Devices
- transfer of control, Soft Reset, Resetting the system using the console, Hard Resetting the SPU
- transfer of control. See also soft reset , Soft Reset
- translation look aside buffer (TLB), Displaying Configured Devices
U- ULOG
- LOG configurator command, Logging User Events
- UPDATE, Soft Reset
- ISL utility, Overview
- UPDATE options, Using the UPDATE utility and options
- UPDATE utility, ISL Boot Utilities, The ISL utility
- updating the operating system, The ISL utility
- preliminary steps, Updating the operating system: a preview
- required steps, Updating the operating system: a preview
- user logging, Modifying Logging Configurations, Logging User Events
- using first level (global module) commands, Using First-Level (Global Module) Commands
- using I/O configurator commands, Using I/O Configurator commands
- using SYSGEN to copy configuration files, Using SYSGEN to Copy the Files
- using the help facility in SYSGEN's global module, Using the Help Facility in SYSGEN's Global Module
- using the system generator (SYSGEN), Using the System Generator (SYSGEN)
- utilities
- SYSGEN, How System Configuration Is Performed
- SYSGEN, activating, Entering the SYSGEN Global Module
- SYSGEN, global module, Using the System Generator (SYSGEN)
- utilities - ISL
- INSTALL, Overview
- IOMAP, Adapting systems for fiber optic data links, Overview
- START, Using the System Generator (SYSGEN)
- UPDATE, Overview
- utilities - MPE XL
- SYSGEN, Using SYSGEN to Copy the Files
|