When in control mode, the AP displays the system status line
across the softkey labels of the system console. The system
status line has this format:
CODE: xxxx REMOTE: < 1 > < 2 > < 3 > ACCESS FAULT: yy
|
Table A-1 “Status Line Display” describes the information presented in the status line.
Table A-1 Status Line Display
| Field | Meaning |
|---|
| xxxx | Represents the four digit LED error code display. |
| 1 | May have one of three values: enabled, pending,
or disabled. These correspond to the status of the remote
console accessibility. The remote console can either be accessed
(enabled), disconnected (disabled), or waiting for
a user session to end (pending). |
| 2 | May be either active or inactive. Active
indicates that a remote console is currently being used.
Inactive indicates that a remote console is not currently being used. |
| 3 | May have one of two values: single or multiple.
This designates whether the AP allows a single attempt (single)
or multiple attempts (multiple) to access the remote console. |
| yy | Displays the number of times
someone tried to access the
remote console but failed to give the proper password. |
The status line is updated with each change, such as when the system cycles through its self-test.
