|
» |
|
|
|
The following configuration parameters are required to define
the HP 3000 host for asynchronous device connections. - Local HP 3000 Node Name
The name by which the HP 3000 Series 900 computer
is known in your network. The format of a node name is nodename.domain.organization,
where each field can contain 16 or fewer characters (alphanumeric,
underscores, or hyphens). The first character of each field must
be alphabetic. For example: ACCOUNTS.MKT2.HP. - Link Name
The link name that is used by the HP 3000's
Datacommunications and Terminal Subsystem (DTS) when device connections
are established. It must start with a letter and can be up to eight
alphanumeric characters. DTSLINK is
the default and should be used for your DTS configuration. - Physical Path of LAN2C (Slot # of LANIC Card)
The location of the LANIC (Local Area Network Interface
Controller Card) in the system's backplane. The location
(slot number) of the LANIC within the cabinet must be specified. The default physical paths (slot numbers) of the LANIC for
HP 3000 computers are listed here. These defaults optimize
performance and use of the computer's cabinet space. Before
moving the LANIC into another slot, consult an HP representative. HP 3000 Systems | Slot
Number |
---|
920, 922, 935, 932, 935, or 949 with HPIB | 4.3 | 920, 925, 935, or 949 with ALINK | 4.2 | 9X7 | 56 | 9X8 | 56/56 | 930 | 8.4 | 950, 955, 960, 980 | 2/4.2 | 990/992,
991/995 | 0/40 |
|