 |
» |
|
|
|
A- activating logging, To Activate Logging
- activating
NS, Operating the Network
- add
- directory
entry, To Add Nodes to the Network Directory File
- add nodes to the network directory, To Add Nodes to the Network Directory File
- adding a node to
the directory, To Add Nodes to the Network Directory File
- additional
address field, To Configure Path Report Data for a Node
- additional domain
name configuration files, Additional Domain Name Configuration Files
- address key, Configuration Worksheet Information, To Configure X.25 Virtual Circuits
- address
resolution, Address Resolution
- domain
name services, Domain Name Services
- network
directory, Network Directory
- address
resolution protocol, Address Resolution Protocol (ARP)
- administrative
node, Planning the Network Directory
- ARP, Address Resolution Protocol (ARP)
- assigning
node name, To Select NS Configuration
- assigning subnet masks, Assigning Subnet Masks
C- card number, Configuration Worksheet Information, To Configure an X.25 Network Interface
- central administrative node, Planning the Network Directory
- centralized network directory, Planning the Network Directory
- checksum for TCP, To Configure Path Report Data for a Node
- classes
of logging events, Configuring Logging
- command
- DSLINE, To Shut Down the Network Services
- DTCCNTRL, To Start a Host-Based X.25 Link
- MAKESTREAM, Copying and Merging Network Directory Files
- MERGEDIR, Copying and Merging Network Directory Files, To Add Nodes to the Network Directory File
- NETCONTROL
START, To Activate Logging, To Start Software Loopback, To Start a Link
- NETCONTROL
STATUS, To Test the Network Services
- NETCONTROL
STOP, To Shut Down the Network Services
- NSCONTROL
START, To Start the Network Services
- NSCONTROL
STATUS, To Test the Network Services
- NSCONTROL STOP, To Shut Down the Network Services
- RESTORE, Copying and Merging Network Directory Files
- STORE, Copying and Merging Network Directory Files
- SWITCHNMLOG
UPDATE, To Activate Logging
- communication
between networks, Communication Between Networks
- completing the internetwork
table, Completing the Internetwork Table
- configuration
- administrative
node, Planning the Network Directory
- domain name
files, Configuring Domain Name Files
- logging, Configuring Logging
- configuration
file, To Begin the Configuration Process
- configuration
file name, To Open the Configuration File, To Open the Network Directory
- configuration
process, Configuration Process Overview
- configure
direct connect/dial node mapping, To Configure Direct Connect/Dial Node Mapping
- configure
domain name resolver, To Create or Modify the Resolver File
- configure
mapping
- direct connect/dial, To Configure Direct Connect/Dial Node Mapping
- configure network directory, To Select the Update Directory Function
- configure
node mapping, To Configure Node Mapping
- configure path report data, To Configure Path Report Data for a Node
- configure
shared dial node mapping, To Configure Shared Dial Node Mapping
- configured gateways, Neighbor Gateway Worksheet Information
- configured reachable
networks, To Identify Neighbor Gateway Reachable Networks, To Identify Neighbor Gateway Reachable Networks, To Identify Neighbor Gateway Reachable Networks
- configuring a gateway
half, Configuring a Gateway Half
- configuring a gateway half pair, Configuring a Gateway Half Pair
- configuring an X.25 node, Configuring an X.25 Node
- configuring domain
name files, Configuring Domain Name Files
- configuring
logging, Configuring Logging
- configuring
the network directory, Configuring the Network Directory
- console
logging field, To Modify the Logging Configuration
- copying a network directory, Copying and Merging Network Directory Files
- create network directory, Planning the Network Directory
- cross-validating
in SYSGEN, To Cross-Validate in SYSGEN
- cross-validation, Configuration Process Overview, To Cross-Validate in SYSGEN
D- decentralized network directory, Planning the Network Directory
- default gateway, Neighbor Gateway Examples, To Identify Neighbor Gateway Reachable Networks, To Configure Neighbor Gateways, To Identify Neighbor Gateway Reachable Networks
- default
gateways, To Configure Neighbor Gateways, To Configure Neighbor Gateways
- define
- directory
entry, To Add Nodes to the Network Directory File
- design
considerations, Network Environment Design Considerations
- destination IP address
- direct dial links, To Configure Direct Connect/Dial Node Mapping
- non-dialed
links, To Configure Direct Connect/Dial Node Mapping
- shared
dial links, To Configure Shared Dial Node Mapping
- dial link, Shared Dial Links, Number of Network Interfaces
- direct connect, To Configure a Gatehalf Network Interface
- direct dial, To Configure a Gatehalf Network Interface
- disable route
- direct dial
links, To Configure Direct Connect/Dial Node Mapping
- non-dialed links, To Configure Direct Connect/Dial Node Mapping
- shared
dial links, To Configure Shared Dial Node Mapping
- disk logging
field, To Modify the Logging Configuration
- domain
keyword, To Create or Modify the Resolver File
- domain name
configuration
- additional
files, Additional Domain Name Configuration Files
- overview, Configuring Domain Name Files
- domain name file
configuration
- guidelines, Configuring Domain Name Files
- domain
name resolver
- to configure, To Create or Modify the Resolver File, To Create or Modify the Hosts File
- domain name
services, Domain Name Services
- drawing a network map, Drawing a Network Map
- drawing
an internetwork map, Drawing an Internetwork Map
- DSLINE command, To Shut Down the Network Services
- DTC node name, Configuration Worksheet Information, To Configure an X.25 Network Interface
- DTCCNTRL
command, To Start a Host-Based X.25 Link
E- enable
Ethernet, Configuration Worksheet Information, To Configure a LAN Network Interface, To Configure a 100VG-AnyLAN Network Interface, To Configure a 100Base-T Network Interface
- enable IEEE 802.3, Configuration Worksheet Information
- entering maintenance
mode, To Select the Update Directory Function
- Ethernet, To Configure a LAN Network Interface, To Configure a 100VG-AnyLAN Network Interface, To Configure a 100Base-T Network Interface
- event logging, Configuring Logging
- exit maintenance
mode, To Select the Update Directory Function
F- facility set, Configuration Worksheet Information, To Configure X.25 Virtual Circuits
- facility
sets
- defined, To Configure X.25 Virtual Circuits
- FDDI
Configuration screen, To Configure an FDDI Network Interface
- FDDI
configuration worksheet, Token Ring Configuration Worksheet, FDDI Configuration Worksheet, 100VG-AnyLAN Configuration Worksheet, 100Base-T Configuration Worksheet
- FDDI Link
name, Configuration Worksheet Information
- field
- console
logging, To Modify the Logging Configuration
- disk
logging, To Modify the Logging Configuration
- fields
- NETXPORT
Log Configuration screens, To Modify the Logging Configuration
- NETXPORT
Log configuration screens, To Modify the Logging Configuration
- Full Duplex
Mode, Configuration Worksheet Information
- full
gateway
- definition of, Full Gateways versus Gateway Halves
- full
gateways versus gateway halves, Full Gateways versus Gateway Halves
G- Gatehalf
Configuration screen, To Configure a Gatehalf Network Interface
- gateway
configuration, Gateway Configuration Overview
- gateway half
- definition
of, Full Gateways versus Gateway Halves
- gateway
half map, Gateway Half Map
- gateway half network interface table, Gateway Half Network Interface Table
- gateway half pair worksheet, Gateway Half Pair Worksheets
- gateway
name, Neighbor Gateway Worksheet Information, To Identify Neighbor Gateways (If Any Are Present), To Identify Neighbor Gateway Reachable Networks, To Identify Neighbor Gateways (If Any Are Present), To Identify Neighbor Gateway Reachable Networks, To Identify Neighbor Gateways (If Any Are Present)
- gateway-half configuration, Configuring a Gateway Half Pair
- gateways, Gateways
- geographical
location, Geographical Location
- global
field, To Add Nodes to the Network Directory File
- global network directory entries, To Add Nodes to the Network Directory File
- global/local flag, To Add Nodes to the Network Directory File
- Global?, To Add Nodes to the Network Directory File
I- identifying neighbor gateways, Identifying Neighbor Gateways
- interface types, Network Interface and Link Types
- internetwork, Internetworks
- internetwork
map, Drawing an Internetwork Map
- internetwork
table, Completing the Internetwork Table
- internetwork
worksheets, Drawing an Internetwork Map
- IP
Address
- network directory, To Configure Path Report Data for a Node
- IP address, Configuration Worksheet Information
- definition of, To Configure a LAN Network Interface, To Configure a Token Ring Network Interface, To Configure an FDDI Network Interface, To Configure a 100VG-AnyLAN Network Interface, To Configure a 100Base-T Network Interface, To Configure a Point-to-Point Network Interface, To Configure an X.25 Network Interface
- entering the
gateway-halfŐs partnerŐs, To Configure a Gatehalf Network Interface
- how
to obtain, To Configure a LAN Network Interface, To Configure a Token Ring Network Interface, To Configure an FDDI Network Interface, To Configure a 100VG-AnyLAN Network Interface, To Configure a 100Base-T Network Interface, To Configure a Point-to-Point Network Interface, To Configure an X.25 Network Interface
- LAN, To Configure a LAN Network Interface, To Configure a Token Ring Network Interface, To Configure an FDDI Network Interface, To Configure a 100VG-AnyLAN Network Interface, To Configure a 100Base-T Network Interface, To Configure a Point-to-Point Network Interface
- X.25, To Configure an X.25 Network Interface
- IP address field, To Configure a LAN Network Interface, To Configure a Token Ring Network Interface, To Configure an FDDI Network Interface, To Configure a 100VG-AnyLAN Network Interface, To Configure a 100Base-T Network Interface, To Configure a Point-to-Point Network Interface, To Configure an X.25 Network Interface
- IP internet address, Neighbor Gateway Reachable networks Worksheet Information
- IP mask, Neighbor Gateway Reachable networks Worksheet Information
- neighbor gateway, To Identify Neighbor Gateway Reachable Networks, To Identify Neighbor Gateway Reachable Networks, To Identify Neighbor Gateway Reachable Networks
- IP
network address, IP Network Addresses, To Identify Neighbor Gateway Reachable Networks, To Identify Neighbor Gateway Reachable Networks, To Identify Neighbor Gateway Reachable Networks
- neighbor gateway, To Identify Neighbor Gateway Reachable Networks, To Identify Neighbor Gateway Reachable Networks, To Identify Neighbor Gateway Reachable Networks
- IP subnet
mask, Configuration Worksheet Information, To Configure a Token Ring Network Interface, To Configure an FDDI Network Interface, To Identify Neighbor Gateways (If Any Are Present), To Identify Neighbor Gateway Reachable Networks, To Identify Neighbor Gateways (If Any Are Present), To Identify Neighbor Gateway Reachable Networks, To Select a Node Mapping Screen, To Identify Neighbor Gateway Reachable Networks
- 100Base-T, To Configure a 100Base-T Network Interface
- 100VG-AnyLAN, To Configure a 100VG-AnyLAN Network Interface
- LAN, To Configure a LAN Network Interface, To Configure an FDDI Network Interface, To Configure a Point-to-Point Network Interface, To Configure an X.25 Network Interface
- token
ring, To Configure a Token Ring Network Interface
- IP subnets, Subnetworks
L- LAN Configuration
screen, To Configure a Point-to-Point Network Interface
- LAN
configuration worksheet, LAN Configuration Worksheet
- LAN internet routing
table, LAN Internet Routing Table
- LAN Link
name, Configuration Worksheet Information
- LAN
network map, LAN Network Map
- LAN network
worksheet, LAN Network Worksheets
- LAN network worksheets, LAN Network Worksheets
- leased
line, Number of Network Interfaces
- leaving
maintenance mode, To Select the Update Directory Function
- line speed, Line Speed
- link manager logging, To Activate Logging
- link name, Configuration Worksheet Information, To Configure a Token Ring Network Interface, To Configure an FDDI Network Interface, To Configure a Point-to-Point Network Interface, To Configure an X.25 Network Interface
- gateway
half, To Configure a Gatehalf Network Interface
- LAN, To Configure a LAN Network Interface, To Configure an FDDI Network Interface, To Configure a 100VG-AnyLAN Network Interface, To Configure a 100Base-T Network Interface, To Configure a Point-to-Point Network Interface
- token ring, To Configure a Token Ring Network Interface
- Link Speed, Configuration Worksheet Information
- link type
- gateway
half, To Configure a Gatehalf Network Interface
- link
types, Network Interface and Link Types
- Local
domain name, Configuration Worksheet Information
- local
entries
- uses of, To Add Nodes to the Network Directory File
- local
network directory entries, To Add Nodes to the Network Directory File
- Local node
name, Configuration Worksheet Information
- local node
name, To Select NS Configuration
- logging classes, Configuring Logging
- logging configuration
- guidelines, Configuring Logging
- overview, Configuring Logging
M- Main
screen, To Select NS Configuration
- maint mode, To Select the Update Directory Function
- maintenance mode, To Select the Update Directory Function
- MAKESTREAM command, Copying and Merging Network Directory Files
- map
- internetwork, Drawing an Internetwork Map
- point-to-point
network, Point-to-Point Network Map
- MERGEDIR
command, Copying and Merging Network Directory Files, To Add Nodes to the Network Directory File
- merging network directory files, Copying and Merging Network Directory Files
- modify
logging configuration, To Modify the Logging Configuration
- modify network directory, Planning the Network Directory
- modify
the domain name resolver, To Create or Modify the Resolver File
- multicast request, Probe and Probe Proxy
- multiple network interfaces, Number of Network Interfaces
N- nameserver
keyword, To Create or Modify the Resolver File
- neighbor
gateway configuration worksheet, Neighbor Gateway Configuration Worksheet
- neighbor gateway IP Internet Address
- X.25, To Identify Neighbor Gateway Reachable Networks
- neighbor gateway
IP internet address, Neighbor Gateway Reachable networks Worksheet Information, To Identify Neighbor Gateway Reachable Networks, To Identify Neighbor Gateway Reachable Networks
- neighbor
gateway reachable networks configuration worksheet, Neighbor Gateway Reachable networks Worksheet Information, Neighbor Gateway Reachable Networks Configuration Worksheet
- Neighbor Gateway Reachable Networks screen, To Identify Neighbor Gateway Reachable Networks, To Identify Neighbor Gateway Reachable Networks, To Identify Neighbor Gateway Reachable Networks
- neighbor
gateway worksheet information, Neighbor Gateway Worksheet Information
- neighbor gateways, Identifying Neighbor Gateways
- defined, To Configure Neighbor Gateways, To Configure Neighbor Gateways, To Configure Neighbor Gateways
- Neighbor Gateways
screen, To Identify Neighbor Gateways (If Any Are Present), To Identify Neighbor Gateways (If Any Are Present), To Identify Neighbor Gateways (If Any Are Present)
- NETCONTROL START
command, To Activate Logging, To Start Software Loopback, To Start a Link
- NETCONTROL
STATUS command, To Test the Network Services
- NETCONTROL STOP
command, To Shut Down the Network Services
- NetIPC logging, To Activate Logging
- netowrk interface
type priority, Priority of Network Interfaces
- NETSAMP.NET.SYS, Network Name Database
- network
and internetwork design considerations, Network Environment Design Considerations
- network boundaries, Network Boundaries
- network boundary, Internetworks, Network Boundaries
- network
directory, Network Directory, Configuring the Network Directory
- centralized, Planning the Network Directory
- configure, To Select the Update Directory Function
- configuring from NMMGR, Network Directory
- copying, Copying and Merging Network Directory Files
- data screen, To Configure Path Report Data for a Node
- decentralized, Planning the Network Directory
- file
structure, Copying and Merging Network Directory Files
- for X.25 networks, When a Network Directory is Required
- global entries, To Add Nodes to the Network Directory File
- local entries, To Add Nodes to the Network Directory File
- planning, Planning the Network Directory
- Select Node Name screen, To Add Nodes to the Network Directory File
- Network
Directory Data screen, To Configure Path Report Data for a Node
- network directory
entry, Configuring the Network Directory
- network
directory file name, To Open the Network Directory
- Network
Directory Main screen, To Select the Update Directory Function
- Network
directory name, Configuration Worksheet Information
- network
directory name
- X.25, To Configure X.25 Virtual Circuits
- Network
directory Select Node Name screen, To Add Nodes to the Network Directory File
- network
directory worksheet, Network Directory Worksheet
- network interface
- LAN, To Perform Guided Network Transport Configuration
- Network
Interface (NI) name, Configuration Worksheet Information
- network interface
(NI) name
- X.25, To Configure X.25 Virtual Circuits
- network interface
name, To Perform Guided Network Transport Configuration
- guidelines for using, To Perform Guided Network Transport Configuration
- network interfaces, Network Interface and Link Types
- network map, Drawing a Network Map
- network name, To Perform Guided Network Transport Configuration
- LAN, To Perform Guided Network Transport Configuration
- network
name database, Network Name Database
- network
planning, Networking Concepts
- Network Services, To Start the Network Services
- starting, To Start the Network Services
- testing, To Test the Network Services
- Network Transport Configuration screen, To Perform Guided Network Transport Configuration
- network transport logging, To Activate Logging
- network type, To Perform Guided Network Transport Configuration
- network
worksheets, Network Worksheets
- NETWORKS.NET.SYS, Network Name Database
- NETXPORT
Log Configuration, To Modify the Logging Configuration
- NETXPORT
Log Configuration screens, To Modify the Logging Configuration
- new
global field, To Add Nodes to the Network Directory File
- new name, Neighbor Gateway Worksheet Information, To Add Nodes to the Network Directory File
- for directory node
entry, To Add Nodes to the Network Directory File
- NI
name, To Perform Guided Network Transport Configuration
- LAN, To Perform Guided Network Transport Configuration
- NI type, To Perform Guided Network Transport Configuration
- NI type priority, Priority of Network Interfaces
- NMCBACK.group.account, To Open the Configuration File, To Open the Network Directory
- NMCONFIG.PUB.SYS, To Open the Configuration File, To Open the Network Directory
- NMMGR, Pre-Configuration Software check, Configuration Process Overview, To Start NMMGR
- node
name, To Add Nodes to the Network Directory File
- network
directory, To Add Nodes to the Network Directory File
- node worksheet
information, Node Worksheet Information
- nodes
having multiple links, To Configure Node Mapping
- nodes
having single links, To Configure Node Mapping
- non-HP 3000 nodes, Non-HP 3000 Nodes (Including PCs)
- NS Configuration screen, To Select Guided Configuration
- NS
validation test, To Test the Network Services
- NSCONTROL
START command, To Start the Network Services
- NSCONTROL STATUS
command, To Test the Network Services
- NSCONTROL STOP command, To Shut Down the Network Services
- NSDIR.NET.SYS, To Open the Configuration File, To Open the Network Directory
- number
of LAN links, Number of Network Interfaces
- number
of network interfaces, Number of Network Interfaces
- number of point-to-point
links, Number of Network Interfaces
- number of token ring links, Number of Network Interfaces
- number
of X.25 links, Number of Network Interfaces
P- partnerŐs IP address, To Configure a Gatehalf Network Interface
- partnerŐs
IP subnet mask, To Configure a Gatehalf Network Interface
- PASSWORD
command, To Open the Configuration File
- path report data, To Configure Path Report Data for a Node
- PDN, To Configure X.25 Virtual Circuits
- Permanent
VC number, Configuration Worksheet Information
- permanent
VC number, To Configure X.25 Virtual Circuits
- permanent virtual circuit, To Configure X.25 Virtual Circuits
- phone
number
- direct dial links, To Configure Direct Connect/Dial Node Mapping
- gateway half, To Configure a Gatehalf Network Interface
- shared dial links, To Configure Shared Dial Node Mapping, To Configure Direct Connect/Dial Node Mapping
- Physical path, Configuration Worksheet Information
- physical path
- gateway half, To Configure a Gatehalf Network Interface
- point-to-point, To Configure a Point-to-Point Network Interface
- Physical
path of device adapter, Configuration Worksheet Information
- physical path of FDDI device
adapter, To Configure an FDDI Network Interface
- Physical
path of LANIC, Configuration Worksheet Information
- Physical
path of Token Ring device adapter, Configuration Worksheet Information
- physical path of token ring device
adapter, To Configure a Token Ring Network Interface
- physicall
path of LANIC, To Configure a LAN Network Interface, To Configure a 100VG-AnyLAN Network Interface, To Configure a 100Base-T Network Interface
- planning
the network directory, Planning the Network Directory
- point-to-point configuration worksheet, Point-to-Point Configuration Worksheet
- point-to-point
internet routing table, Point-to-Point Internet Routing Table
- Point-to-Point
Link name, Configuration Worksheet Information
- point-to-point
network map, Point-to-Point Network Map
- point-to-point network table, Point-to-Point Network Table
- point-to-point
network worksheet, Point-to-Point Network Worksheets
- print dir, To Select the Update Directory Function
- print network directory, To Select the Update Directory Function
- priority
- direct
dial links, To Configure Direct Connect/Dial Node Mapping
- non-dialed
links, To Configure Direct Connect/Dial Node Mapping
- shared
dial, To Configure Shared Dial Node Mapping
- priority of network
interfaces, Priority of Network Interfaces
- probe, Probe and Probe Proxy
- probe protocol, Probe and Probe Proxy
- probe request, Probe and Probe Proxy
- programmable
serial interface, To Configure a Point-to-Point Network Interface
- protocol name database, Protocol Name Database
- PROTOCOL.NET.SYS, Protocol Name Database
- PROTSAM.NET.SYS, Protocol Name Database
- proxy
- probe, Probe and Probe Proxy
- Proxy node, Configuration Worksheet Information
- proxy node, To Configure a LAN Network Interface, To Configure a 100VG-AnyLAN Network Interface, To Configure a 100Base-T Network Interface
- proxy server, Probe and Probe Proxy
- PSI, To Configure a Point-to-Point Network Interface
- public data network, To Configure X.25 Virtual Circuits
- PVC, To Configure X.25 Virtual Circuits
- PVC number, To Configure X.25 Virtual Circuits
- PVC parameters, To Configure X.25 Virtual Circuits
- PXP
field
- network directory, To Configure Path Report Data for a Node
R- redirect output, To Select the Update Directory Function
- Remote
IP address, Configuration Worksheet Information
- remote
IP address, To Configure X.25 Virtual Circuits
- Remote
node name, Configuration Worksheet Information
- remote node name, To Configure X.25 Virtual Circuits
- Remote
X.25 address, Configuration Worksheet Information
- remote X.25
address, To Configure X.25 Virtual Circuits
- RESLVCNF.NET.SYS, To Create or Modify the Resolver File
- resolver file, To Create or Modify the Resolver File
- resolver file keywords, To Create or Modify the Resolver File
- RESTORE command, Copying and Merging Network Directory Files
- route name
- defined, To Configure Shared Dial Node Mapping
- direct dial links, To Configure Direct Connect/Dial Node Mapping
- non-dialed links, To Configure Direct Connect/Dial Node Mapping
- shared dial links, To Configure Shared Dial Node Mapping
- routename
- shared
dial links, To Configure Shared Dial Node Mapping
S- search
keyword, To Create or Modify the Resolver File
- Security
class, Configuration Worksheet Information
- security
string
- direct dial links, To Configure Direct Connect/Dial Node Mapping
- gateway
half, To Configure a Gatehalf Network Interface
- shared dial links, To Configure Shared Dial Node Mapping
- service
name database, Service Name Database
- SERVICES.NET.SYS, Service Name Database
- SERVSAM.NET.SYS, Service Name Database
- shared dial link, Shared Dial Links
- limitations, Shared Dial Links
- shut down Network Services, To Shut Down the Network Services
- shutting down NS, To Shut Down the Network Services
- Speed, Configuration Worksheet Information
- speed
- line, Line Speed
- point-to-point, To Configure a Point-to-Point Network Interface
- starting
a host-based X.25 link, To Start a Host-Based X.25 Link
- starting a link, To Start a Link
- starting links and services, To Start Software Loopback
- starting network services, To Start the Network Services
- starting NS, To Start the Network Services
- starting software loopback, To Start Software Loopback
- stop Network Services, To Shut Down the Network Services
- STORE
command, Copying and Merging Network Directory Files
- subnet masks
- assigning, Assigning Subnet Masks
- determining, Assigning Subnet Masks
- subnetworks, Subnetworks
- SVC, To Configure X.25 Virtual Circuits
- SVC
parameters, To Configure X.25 Virtual Circuits
- switched virtual circuit, To Configure X.25 Virtual Circuits
- SWITCHNMLOG
UPDATE command, To Activate Logging
- SYSGEN facility
- use for
cross-validation, To Cross-Validate in SYSGEN
T- TCP checksum, To Configure Path Report Data for a Node
- TCP
field
- network directory, To Configure Path Report Data for a Node
- testing Network Services, To Test the Network Services
- to access the logging configuration
screens, To Access the Logging configuration Screens
- to activate logging, To Activate Logging
- to add nodes to the network directory, To Add Nodes to the Network Directory File
- to configure a 100VG-AnyLAN
network interface, To Configure a 100VG-AnyLAN Network Interface
- to
configure a gatehalf network interface, To Configure a Gatehalf Network Interface
- to
configure a LAN network interface, To Configure a LAN Network Interface, To Configure a 100Base-T Network Interface
- to configure a point-to-point
network interface, To Configure a Point-to-Point Network Interface
- to
configure a token ring network, To Configure a Token Ring Network Interface
- to
configure an FDDI network, To Configure an FDDI Network Interface
- to
configure an X.25 network interface, To Configure an X.25 Network Interface
- to configure direct connect/dial node mapping, To Configure Direct Connect/Dial Node Mapping
- to configure neighbor
gateways, To Configure Neighbor Gateways, To Configure Neighbor Gateways, To Configure Neighbor Gateways
- to
configure path report data for a node, To Configure Path Report Data for a Node
- to
configure shared dial node mapping, To Configure Shared Dial Node Mapping
- to
configure the domain name resolver, To Create or Modify the Resolver File
- to configure
the hosts file, To Create or Modify the Hosts File
- to
configure X.25 virtual circuits, To Configure X.25 Virtual Circuits
- to draw a network map, Drawing a Network Map
- to enable users for individual logging
classes, To Enable Users for Individual Logging Classes
- to enter maintenance
mode, To Select the Update Directory Function
- to exit maintenance
mode, To Select the Update Directory Function
- to
identify neighbor gateway reachable networks, To Identify Neighbor Gateway Reachable Networks, To Identify Neighbor Gateway Reachable Networks
- to identify neighbor
gateways, To Identify Neighbor Gateways (If Any Are Present), To Identify Neighbor Gateways (If Any Are Present), To Identify Neighbor Gateways (If Any Are Present)
- to
modify the domain name resolver, To Create or Modify the Resolver File
- to modify
the hosts file, To Create or Modify the Hosts File
- to
modify the logging configuration, To Modify the Logging Configuration
- to open the configuration
file, To Open the Configuration File
- to
perform guided network transport configuration
- LAN, To Perform Guided Network Transport Configuration
- to select guided configuration, To Select Guided Configuration
- to select NS
configuration, To Select NS Configuration
- to select the update directory function, To Select the Update Directory Function
- to shut down Network Services, To Shut Down the Network Services
- to start
a host-based X.25 link, To Start a Host-Based X.25 Link
- to start a link, To Start a Link
- to start links and services, To Start Software Loopback
- to start network services, To Start the Network Services
- to start NMMGR, To Start NMMGR
- to start software loopback, To Start Software Loopback
- to test Network Services, To Test the Network Services
- Token
Ring Configuration screen, To Configure a Token Ring Network Interface
- token
ring configuration worksheet, Token Ring Configuration Worksheet
- Token
Ring Link name, Configuration Worksheet Information
- transmission speed
- gateway
half, To Configure a Gatehalf Network Interface
- transport
services, To Configure Path Report Data for a Node
- Type, Configuration Worksheet Information
- type
- network
directory data, To Configure Path Report Data for a Node
|