HP 3000 Manuals

HP CD Extensions for MPE/iX Installation and Administration Guide

Mounting CD-ROM Disks 

MPE/iX disks loaded into non-SCSI drives are automatically recognized by
the system and mounted.  If you are using a non-SCSI drive, you do not
need to mount MPE/iX CD-ROM disks manually.

If you are using a SCSI drive, you need to tell the system to mount a
CD-ROM disk.  After inserting the MPE/iX CD-ROM, you need to mount the
disk manually.

To mount an MPE/iX CD-ROM disk onto a SCSI drive, use the AVRSCSI MOUNT
command.  Type:

     :AVRSCSI.INSTALL.SYS MOUNT:ldev# 

where ldev# is the LDEV number of the device on which you want to mount
the CD-ROM disk.  For example, to load a disk onto LDEV 5, type:

     :AVRSCSI.INSTALL.SYS MOUNT:5 

You do not normally have to manually dismount the disk.  For example,
during a software update, the HPINSTAL file automatically dismounts each
disk when it finishes installing the information on that disk.

MPE/iX 5.0 Documentation