HP 3000 Manuals HP 3000 Manuals
Host Diagnostic Interface
The Host Diagnostic Interface is the user's interface to diagnostic tests
for Resource Sharing applications. The errors explained here are
generated by this program.
HDI 101
Not used.
HDI 102 Internal Error; local PLabel mismatch!
System error.
Write down the error numbers and messages, then contact your HP
representative.
HDI 103 Internal Error; failure in Create/Release Known Sys Object
System error.
Write down the error numbers and messages, then contact your HP
representative.
HDI 104
Not used.
HDI 105 Internal Error; failure in configuration file access
Failed to access configuration file DGCONFIG.PPC.SYS.
Write down the error number and message, then contact your HP
representative.
HDI 106 Message catalog access error number; message ID = number
Error in gaining access to message catalog CPDDG000.PPC.SYS.
Write down the error numbers and messages, then contact your HP
representative.
HDI 107 Message catalog open error number
Error occurred in opening message catalog CPDDG000.PPC.SYS.
Write down the error numbers and messages, then contact your HP
representative.
HDI 108 No current product ID exists
A product identification code was not supplied to the intrinsics.
If you are using the command mode program (PPCDIAGC.PPC.SYS), enter the
PRODID command to set the product identification code to RESSHR for
Resource Sharing print and disc functions or RSBACKUP for Resource
Sharing PC Backup functions.
HDI 109 Unknown command
An unknown command was given to the command mode program.
Type a valid command or type HELP for more information.
HDI 110 Cannot open IPC Message File
You are out of disc space.
Free additional disc space and try again.
HDI 111 Unknown type of IPC message file access requested
System error. The diagnostic is not responding with the proper IPC
messages.
Write down the error numbers and messages, then contact your HP
representative.
HDI 112 Illegal type of IPC message file access requested
System error.
Write down the error numbers and messages, then contact your HP
representative.
HDI 113 End-of-file encountered during IPC message file access
System error.
Write down the error numbers and messages, then contact your HP
representative.
HDI 114 Unknown product ID given
An unregistered product identifier string was specified.
Correctly type the desired product identifier, or install the desired
product if not already installed.
HDI 115 Invalid product ID given
The product identifier specified does not have the proper syntax for a
product identifier.
Correctly type the desired product identifier. Type HELP to display
the product identifiers for all configured products.
HDI 116 Invalid product name specified
A product has been configured with an invalid product name.
Write down the error numbers and messages, then contact your HP
representative.
HDI 117 Invalid product number specified
A product has been configured with an incorrect product part number.
Write down the error numbers and messages, then contact your HP
representative.
HDI 118 Invalid diagnostic program specified
A product has been configured with an invalid name for its diagnostic.
Write down the error numbers and messages, then contact your HP
representative.
HDI 119 Invalid diagnostic catalog file specified
A product had attempted to register itself with an invalid name for its
diagnostic catalog.
Write down the error numbers and messages, then contact your HP
representative.
HDI 120 No diagnostic catalog file supplied
A product has registered itself with a diagnostic but no supporting
catalog.
Write down the error numbers and messages, then contact your HP
representative.
HDI 121 Number of products configured exceeds limits
A new product diagnostic cannot be added. The maximum number of
registered products has already been reached.
Write down the error numbers and messages, then contact your HP
representative.
HDI 122 No products are configured; check configuration file
The Host Diagnostic Interface cannot be used until at least one product
has been installed.
Install the products that have been purchased, then rerun the Host
Diagnostic Interface.
HDI 123 Error encountered in trace output file
The tracing output file has detected an MPE file error.
This is probably a lack of disc space. Free disc space and try again.
HDI 124 Tracemap: procedure ids not ascending
Procedure IDs must be contiguous and ascending in the TRACEMAP file.
None necessary. Tracing can still proceed, although the procedure
names will not appear in the output.
HDI 125 Tracemap: procedure ids not contiguous (within a subsystem)
Procedure IDs must be contiguous and ascending in the TRACEMAP file.
None necessary. Tracing can still proceed, although the procedure
names will not appear in the output.
HDI 126 Tracemap: too many subsystem ids (limit is 25)
Procedure IDs must be contiguous and ascending in the TRACEMAP file.
None necessary. Tracing can still proceed, although the procedure
names will not appear in the output.
HDI 127 Tracemap: First procedure ID not 1
Procedure IDs must be contiguous and ascending in the TRACEMAP file.
None necessary. Tracing can still proceed, although the procedure
names will not appear in the output.
HDI 128 Tracemap: Unknown Subsystem ID encountered
The specified trace ID is not in the TRACEMAP file.
None necessary. Tracing can still proceed, although the name of this
procedure cannot be determined.
HDI 129 Tracemap: Unknown Procedure ID encountered
The specified trace ID is not in the TRACEMAP file.
None necessary. Tracing can still proceed, although the name of this
procedure cannot be determined.
HDI 130 Tracemap: Invalid data segment specified
System error.
Write down the error numbers and messages, then contact your HP
representative.
HDI 131 Tracemap: Cannot Open Trace ID mapping file
An incorrect filename was specified to the tracing intrinsics.
None necessary. Tracing can still continue, although trace names will
not appear in the output.
HDI 132 Error occurred when attempting to open the trace data file
System error.
Write down the error numbers and messages, then contact your HP
representative.
HDI 133 Error occurred when reading the trace data file
System error.
Write down the error numbers and messages, then contact your HP
representative.
HDI 134 End of file encountered when reading the trace data file
System error.
Write down the error numbers and messages, then contact your HP
representative.
HDI 135 Error occurred when calling NMOpenTrace
You are probably out of disc space.
Free disc space and try again.
HDI 136 Error occurred when calling NMWriteTrace
You are probably out of disc space.
Free disc space and try again.
HDI 137 Error occurred when calling NMCloseTrace
You are probably out of disc space.
Free disc space and try again.
HDI 138 This product has no diagnostic
No diagnostic program was specified when the product was installed, so no
diagnostic tests can be run on this product.
HDI 139 Could not create the diagnostic
The product diagnostic has been incorrectly installed or the diagnostic
program was purged.
Check the product configuration (using PPCDIAG.PPC.SYS) and restore the
diagnostic program file named in the configuration.
HDI 140 Could not create the requested Diagnostic Interface
System error.
Write down the error numbers and messages, then contact your HP
representative.
HDI 141 File is not a valid program file
The diagnostic attempted to check the version of a program and found the
file was not a program file.
Write down the error numbers and messages, then contact your HP
representative.
HDI 142 Entry point not found
The diagnostic attempted to check the version of a program by entry
point, but the target entry point was not found.
Write down the error numbers and messages, then contact your HP
representative.
HDI 143 Return statement not at the entry point
The diagnostic tried to get the version number from a program but was
unable to find it.
Write down the error numbers and messages, then contact your HP
representative.
HDI 144 Invalid field found in version number
The version number is not in the correct format.
Write down the error numbers and messages, then contact your HP
representative.
HDI 145 File has no user label
An attempt was made to get the version number out of the user label.
Write down the error number and text and contact your HP
representative.
HDI 146 Node Management end-of-file
System error.
Write down the error numbers and messages, then contact your HP
representative.
HDI 147 Module not found
The desired system component was missing.
Restore the lost component or contact your HP representative.
HDI 148 "V" portion of versions do not match
Version numbers do not match.
Write down the error numbers and messages, then contact your HP
representative.
HDI 149 "UU" portion of versions do not match
Version numbers do not match.
Write down the error numbers and messages, then contact your HP
representative.
HDI 150 "FF" portion of versions do not match
Version numbers do not match.
Write down the error numbers and messages, then contact your HP
representative.
HDI 151 Invalid module name
An invalid module name was supplied after a module version number was
requested.
Write down the error numbers and messages, then contact your HP
representative.
HDI 152 Invalid module flag mode or type options
A module was specified incorrectly.
Write down the error numbers and messages, then contact your HP
representative.
HDI 153 Diagnostic program aborted without reply
The diagnostic program aborted without reporting any reason for the
failure.
Write down the error numbers and messages, then contact your HP
representative.
HDI 154 Non-existent module
The specified module was not found.
Write down the error numbers and messages, then contact your HP
representative.
HDI 155 Invalid info string; info string not passed from interface
You probably tried to run the diagnostic from the system command
interface instead of from the Host Diagnostic Interface.
Run the diagnostic from one of the Host Diagnostic Interface programs,
PPCDIAG.PPC.SYS or PPCDIAGC.PPC.SYS.
HDI 156 - HDI 1200
Not used.
HDI 1201 Catalog message system failure
An error was encountered when accessing the message catalog.
Restore the file from a current backup.
HDI 1202
Not used.
HDI 1203 Unexpected EOF encountered in input
An end of file was detected on $STDIN.
Rerun the program.
HDI 1204 Read error encountered on file name; error number number
An MPE file system error was detected while processing an include file.
Respond to the file system error and try again.
HDI 1205 Unknown command
The data typed in is not a supported command.
Correct and retype your input.
HDI 1206 Maximum "include" nesting depth of number exceeded
An attempt was made to nest "include" files deeper than allowed.
Verify that no two include files reference each other, creating a
recursive loop.
HDI 1207 Error in Opening file name; MPE file error number
An MPE file system error was detected while attempting to open an include
file.
Respond to the file system error and try again.
HDI 1208 A file name was expected here
The command syntax requires a filename to be specified.
Type a filename and proceed.
HDI 1209 No product ID specified and not default product ID
The command syntax requires that a default product ID be set with the
PRODID command or that you explicitly identify a product with its code.
Correctly type the product ID. If you don't know what it is, type HELP
to display the product IDs for all configured products.
HDI 1210 Product ID is invalid (possibly too long)
An invalid product ID was specified.
Correctly type the product ID. If you don't know what it is, type HELP
to display the product IDs for all configured products.
HDI 1211 No test number given
The SPECIAL command requires a test number.
Type the number for the test you wish to run.
HDI 1212 An invalid test number specified; test numbers are numeric
1-999
You typed the test number incorrectly.
Type a number for the test you wish to run.
HDI 1213 Extraneous data was input; command line ignored
Extra data was detected.
Retype the command.
HDI 1214 Executing diagnostic test #number
HDI 1215
Not used.
HDI 1216 A product ID or a test number was expected here
Invalid command syntax.
Type HELP for correct command syntax.
HDI 1217 Expected either "on" or "off"; command line ignored
Invalid command syntax.
Type HELP for correct command syntax.
HDI 1218 - HDI 1219
Not used.
HDI 1220 Product has no help messages in its catalog
The message catalog has been corrupted.
Restore the product's diagnostic catalog file.
HDI 1221 - HDI 1222
Not used.
HDI 1223 Process creation failed; MPE error status number
A program could not be created.
Respond to the MPE error and try again.
HDI 1224
Not used.
HDI 1225 Expected to find an equal sign ("=")
Syntax requires the equal sign (=).
Type HELP for correct syntax.
HDI 1403 Pin not found for RESSHR product.
You entered ABORTPCUSER with an incorrect PIN number.
Re-enter the PIN number of the PC user's job you want to abort.
HDI 1409 - HDI 1412
Not used.
HDI 1413 RESSHR not registered. To register, run RESMGR and exit.
Resource Sharing has not been registered as a product entitled to use the
host diagnostics.
Run RESMGR.PPC.SYS to ensure the RESSHR product is registered.
HDI 1414 Product ID or PIN # expected.
You entered the ABORTPCUSER without specifying either the product ID or
PIN specified.
Enter the ABORTPCUSER command with the correct values; for example,
ABORTPCUSER RESSHR 25 where RESSHR is the product ID and 25 is the PIN to
be aborted.
HDI 1415 Common Session ABORTPCUSER error: nnnn
An error occurred in the Host Diagnostic Interface.
Look up the HDI error number in this appendix.
HDI 1416 No PIN # given.
You entered the ABORTPCUSER command without a PIN #.
Enter ABORTPCUSER with the PIN # of the PC user's session that you want
to abort.
HDI 1417 Invalid PIN #.
You entered the ABORTPCUSER command with an alphabetic PIN designation.
Enter ABORTPCUSER with the appropriate PIN number.
HDI 1418
Not used.
HDI 1419 Product ID is not configured for Common Session.
You entered the SHOWPCUSER command with a product ID not registered by
the Host Diagnostic Interface.
Re-enter the SHOWPCUSER command with the correct Product ID for
Resource Sharing (RESSHR).