HP 3000 Manuals HP 3000 Manuals
HP Desk JCWs
A number of JCWs that are used in the operation of HP Desk are listed
here together with a brief description and an indication of where they
are used.
JCW Name | Where Used | Description
| |
---------------------------------------------------------------------------
| |
ADMINTRACE | ADMIN server | Enable tracing.
| |
ADMINUTSTRACE | ADMINUTS program | Enable tracing.
| |
CHECKAHEAD | SUPRVISR.MAILJOB | How far ahead, in
| | minutes, the TICKLER
| | process checks for
| | appointments.
| |
COMPSTATSREPORT | STATSREP.MAILJOB | JCW indicates which
| | statistics reports
| | generate.
| |
CONCURRENT | MAILMNT2.MAILJOB | Used to allow/disallow
| | concurrent Mailmaint.
| |
DEFERSONSTDLIST | SUPVISR.MAILJOB | If set to 1 child
| | process STDLIST files
| | are deffered from
| | printing.
| |
DELETEFILES | STATSCOM.MAILJOB | Indicates previous
| | statistic files to be
| | deleted.
| |
EDITTRACE | MAILEDIT program | Enable tracing.
| |
ERRLIMIT | MAILMNT2.MAILJOB | Number of errors that
| | Mailmaint will report
| | before terminating.
| |
FSCMAXRECLEN | Master Truck | Allows the record length
| | for ARPA message files
| | to be altered.
| |
HPDESK | User Interface | If a user uses the
| | NEWMAIL command, this
| | JCW is set to reflect
| | the number of new
| | messages in the user's
| | In Tray.
| |
HPDESKERR | User Interface | Used by the Application
| | Integration feature
| | (Application Data
| | Passing) to report
| | errors encountered by HP
| | Desk back to the
| | application.
| |
JCW Name | Where Used | Description
| |
---------------------------------------------------------------------------
| |
HPDESKPROCCONTROL | User Interface | Used by the Application
| | Integration feature to
| | allow the application to
| | indicate to HP Desk the
| | Interrupt Mode being
| | used.
| |
HPNSIDLESLAVES | SUPVISR.MAILJOB | Specifies the limit of
| | idle NS Slave Trucks to
| | be retained and reused.
| | The default value = 0
| | and has a range of 0 to
| | 35. The idle limit
| | represents the number of
| | idle (not the total) NS
| | Slave Truck processes
| | that the NS monitor will
| | retain.
| |
LOCKALLSETS | SUPRVISR.MAILJOB | Set to 0: Enables
| | complete dataset
| | locking. Set to 1:
| | Enables partial dataset
| | locking.
| |
MAILCHECKEXIT | User Interface | Set to 0, turns off New
| | mail has arrived prompt
| | when exiting HP Desk.
| |
MAILSCANTIME | User Interface | How often New Mail
| | folder is scanned, in
| | seconds. Default is 600
| | seconds.
| |
MAILTASK | TRUCKS.MAILJOB | Used by the TRUCKS job
| | to indicate the number
| | of master truck jobs to
| | be streamed.
| |
MAILTIMEDOUT | User Interface | HP Desk session was
| | timed out, using the
| | MAXNEWMAILSCAN JCW.
| |
MAILTRACE | User Interface | Enable tracing.
| MAILCONFIG program |
| BINSTALL program |
| CONVERT program |
| |
MAXNEWMAILSCAN | SUPRVISR.MAILJOB | Timeout length in
| User Interface | seconds. Session timed
| | out at next new mail
| | scan.
| |
MUGOODACT | MAILUTIL program | Indicates the number of
| | successfully applied
| | transactions.
| |
MUBBADACT | MAILUTIL program | Indicates the number of
| | unsuccessfully applied
| | transactions.
| |
JCW Name | Where Used | Description
| |
---------------------------------------------------------------------------
| |
NAMEMATCH | User Interface | Set to 1 to use an
| | alternative algorithm
| | for matching names in
| | Distribution Lists.
| |
NLDATALANG | User Interface | Selects the language ID
| | appropriate to the
| | (non-USASCII) data the
| | user wishes to enter or
| | read.
| |
NLUSERLANG | User Interface | Selects the language in
| | which the HP Desk
| | product is presented to
| | the user, including its
| | command dialogue.
| |
NODEINSTATSREPORT | STATSREP.MAILJOB | JCW indicates which
| | statistics reports
| | generate.
| |
NODEOUTSTATSREPORT | STATSREP.MAILJOB | JCW indicates which
| | statistics reports
| | generate.
| |
PASSEDIT | PASSEDIT program | Indicates whether
| | Passedit has failed in
| | batch mode, due to
| | invalid parameters,by
| | being set to non-zero.
| |
| |
| | 1 the PARM value
| | was out of range
| | (<1 or > 14)
| |
| | 2 the INFO string
| | was out of range
| | (length > 8)
| |
| | 3 the INFO string
| | contained an
| | invalid
| | character.
| |
PAUSELENGTH | SUPRVISR.MAILJOB | How long between TICKLER
| | appointment checks, in
| | minutes.
| |
PRINTSCHEMAS | MAILCONFIG | Directs printing of
| | schema to a line
| | printer.
| |
PROGAVSTATSREPORT | STATSREP.MAILJOB | JCW indicates which
| | statistics reports
| | generate.
| |
JCW Name | Where Used | Description
| |
---------------------------------------------------------------------------
| |
QUICKLIST | MAILMNT2.MAILJOB | Suppress MREPORT print.
| |
RETURNTOSENDER | SUPRVISR.MAILJOB | Controls what is
| | returned to the sender
| | of a message when it
| | found that one or more
| | names in the
| | Distribution List cannot
| | be resolved. By default
| | an informative message
| | is returned to the
| | sender indicating which
| | recipient did not
| | receive the message,
| | including the original
| | message. This can also
| | be achieved by setting
| | the value of the JCW to
| | 4. If the value is set
| | to 0, the message will
| | be returned to the
| | sender without the
| | original message
| | attached, and the
| | original message will be
| | sent to General Delivery
| | on the relevant
| | mailnode, or if a
| | default sublocation has
| | been specified, it will
| | be forwarded to that
| | default sublocation
| |
SAVESOFTKEYS | User Interface | Set to 1 to save
| | softkeys.
| |
SHORTLIST | MAILMNT2.MAILJOB | Abbreviated MREPORT
| | output.
| |
SHREDSCANPAUSE | Supervisor job | Defines the wait time
| | between ending a garbage
| | queue scan and
| | restarting at the
| | beginning again. The
| | range in minutes, is
| | between one and sixty
| | with the default value
| | equal to two. You will
| | need HP DeskManagerPLUS
| | to use this JCW. Used by
| | the Garbage Collector.
| |
STATISTICS | MAILMNT2.MAILJOB | Turns on/off HP Desk
| | statistics reporting
| | capability.
| |
JCW Name | Where Used | Description
| |
---------------------------------------------------------------------------
| |
TEMPUSERFILESIZE | STATSCOM.MAILJOB | These JCWs define the
| | size of the work files
| | used by the statistics
| | generation program.
| |
TEMPNODEOUTFILESIZE | STATSCOM.MAILJOB | JCW defines the size of
| | the work files used by
| | the statistics
| | generation program.
| |
TEMPNODEINFILESIZE | STATSCOM.MAILJOB | JCWs defines the size of
| | the work files used by
| | the statistics
| | generation program.
| |
TEMPCOMPUFILESIZE | STATSCOM.MAILJOB | JCWs defines the size of
| | the work files used by
| | the statistics
| | generation program.
| |
TEMPUSERMAILEFILESIZ | STATSCOM.MAILJOB | JCWs defines the size of
| | the work files used by
| | the statistics
| | generation program.
| |
TEMPWORKFILESIZE | STATSCOM.MAILJOB | JCWs defines the size of
| | the work files used by
| | the statistics
| | generation program.
| |
TEMPLOCALNODEFILESIZ | STATSCOM.MAILJOB | JCWs defines the size of
| | the work files used by
| | the statistics
| | generation program.
| |
TRUCKWAIT | MAILMAN.MAILJOB | JCW indicates time to
| | wait for the Master
| | Trucks to shutdown
| | before the Maintenance
| | stops.
| |
USERREMSTATSREPORT | STATSREP.MAILJOB | JCW indicates which
| | statistics reports
| | generate.
| |
USERMAILSTATSREPORT | STATSREP.MAILJOB | JCW indicates which
| | statistics reports
| | generate.
| |
USERSTATSREPORT | STATSREP.MAILJOB | JCW indicates which
| | statistics reports
| | generate.
| |