HP 3000 Manuals HP 3000 Manuals
(Subsystem 148) (contd.)
---------------------------------------------------------------
320 MESSAGE An error occurred on the first read; not enough
data read.
CAUSE Tape read expected 256 bytes and got less than 200
bytes. Possible tape read error or tape position
error. First read from the tape. Reading labels.
ACTION Clean tape drive and retry. Clean tape drive,
remake tape and retry.
---------------------------------------------------------------
321 MESSAGE An error was received from RENDEZVOUSIO reading
the second label from the tape.
CAUSE Error returned from RENDEZVOUSIO for read labels.
Second read from the tape. Possible tape read
error or tape position error.
ACTION Determine cause of error from RENDEZVOUSIO and
correct. Clean tape drive and retry. Clean tape
drive, remake tape and retry.
---------------------------------------------------------------
322 MESSAGE An error was received from SENDIO reading the
second label from the tape.
CAUSE Error returned from SENDIO for read labels. Second
read from the tape.
ACTION Determine cause of error from SENDIO and correct.
---------------------------------------------------------------
323 MESSAGE An error occurred on the second read; not enough
data read.
CAUSE Tape read expected 256 bytes and got less than 200
bytes. Possible tape read error or tape position
error. Second read from the tape. Reading labels.
ACTION Clean tape drive and retry. Clean tape drive,
remake tape and retry.
---------------------------------------------------------------
324 MESSAGE An error was received from RENDEZVOUSIO reading
the LIF directory from the tape.
CAUSE Error returned from RENDEZVOUSIO for read labels.
Third read from the tape. Possible tape read error
or tape position error.
ACTION Determine cause of error from RENDEZVOUSIO and
correct. Clean tape drive and retry. Clean tape
drive, remake tape and retry.
---------------------------------------------------------------
325 MESSAGE An error was received from SENDIO reading the LIF
directory from the tape.
CAUSE Error returned from SENDIO for read labels. Third
read from the tape.
ACTION Determine cause of error from SENDIO and correct.
---------------------------------------------------------------
326 MESSAGE An error occurred reading the LIF directory from
the tape; not enough data.
CAUSE Tape read expected 256 bytes and got less than 200
bytes. Possible tape read error or tape position
error. Third read from the tape. Reading labels.
ACTION Clean tape drive and retry. Clean tape drive,
remake tape and retry.
---------------------------------------------------------------
327 MESSAGE This is not an MPE/iX boot tape; LIF label bad.
CAUSE LIF label check failed. Not a valid boot tape.
ACTION Retry with a valid boot tape.
---------------------------------------------------------------
328 MESSAGE This is not an MPE/iX boot tape; MPE/iX label
bad.
CAUSE MPE/iX label check failed. Not a valid boot tape.
ACTION Retry with a valid boot tape.
---------------------------------------------------------------
330 MESSAGE An error was received from SENDIO writing disk
page 1.
CAUSE Error from LOAD_POST writing to sector zero and one
of LDEV 1. First write to sector zero and one of
LDEV 1.
ACTION Determine cause of error from LOAD_POST and
correct.
---------------------------------------------------------------
331 MESSAGE An error was received from CREATE_OBJECT for
first tape I/O buffer.
CAUSE Error returned from CREATE_OBJECT for tape I/O
buffer 1.
ACTION Determine cause of error from CREATE_OBJECT and
correct.
---------------------------------------------------------------
332 MESSAGE An error was received from CREATE_OBJECT for a
second tape I/O buffer.
CAUSE Error returned from CREATE_OBJECT for tape I/O
buffer 2.
ACTION Determine cause of error from CREATE_OBJECT and
correct.
---------------------------------------------------------------
333 MESSAGE An error was received from CREATE_OBJECT for the
tape LIF directory buffer.
CAUSE Error returned from CREATE_OBJECT for tape LIF
directory buffer.
ACTION Determine cause of error from CREATE_OBJECT and
correct.
---------------------------------------------------------------
334 MESSAGE An error was received from CREATE_OBJECT for the
disk LIF directory buffer.
CAUSE Error returned from CREATE_OBJECT for disk LIF
directory buffer.
ACTION Determine cause of error from CREATE_OBJECT and
correct.
---------------------------------------------------------------
335 MESSAGE An error was received from CREATE_OBJECT for the
tape LIF label buffer.
CAUSE Error returned from CREATE_OBJECT for tape LIF
label buffer.
ACTION Determine cause of error from CREATE_OBJECT and
correct.
---------------------------------------------------------------
336 MESSAGE An error was received from CREATE_OBJECT for the
tape MPE/iX label.
CAUSE Error returned from CREATE_OBJECT for tape MPE/iX
label buffer.
ACTION Determine cause of error from CREATE_OBJECT and
correct.
---------------------------------------------------------------
337 MESSAGE An error was received from HPOPEN for creating
LIF directory.
CAUSE Error from HPOPEN for LIFDIREC file.
ACTION Determine cause of error from HPOPEN and correct.
---------------------------------------------------------------
338 MESSAGE An error was received from FWRITE for the LIF
directory.
CAUSE Error from FWRITE for LIFDIREC file.
ACTION Determine cause of error from FWRITE and correct.
---------------------------------------------------------------
339 MESSAGE An error was received from FCLOSE, closing the
LIF directory.
CAUSE Error from FCLOSE for LIFDIREC file.
ACTION Determine cause of error from FCLOSE and correct.
---------------------------------------------------------------
340 MESSAGE An error occurred writing page 1 of the disk.
CAUSE Error from LOAD_POST writing sector zero and one of
LDEV 1.
ACTION Determine cause of error from LOAD_POST and
correct.
---------------------------------------------------------------
341 MESSAGE An error was received from RENDEZVOUSIO reading
the disk labels.
CAUSE Error returned from RENDEZVOUSIO for read disk page
1, sector zero and one.
ACTION Determine cause of error from RENDEZVOUSIO and
correct.
---------------------------------------------------------------
342 MESSAGE An error was received from SENDIO reading the
disk labels.
CAUSE Error returned from SENDIO for read disk page 1,
sector zero and one.
ACTION Determine cause of error from SENDIO and correct.
---------------------------------------------------------------
343 MESSAGE This is not an MPE XL disk. UPDATE failed;
INSTALL required.
CAUSE Disk LDEV 1 is not a valid MPE/iX system master
volume.
ACTION Replace with a valid MPE/iX system master and
retry. Volume cannot be updated, INSTALL is
required.
---------------------------------------------------------------
345 MESSAGE System Abort 345
CAUSE Internal error. Invalid spare state. Debug code
not released.
ACTION Call your Hewlett-Packard Representative.
---------------------------------------------------------------
346 MESSAGE A failure was received from CREATE_OBJECT for a
semaphore to use to interlock the label.
CAUSE Error returned from CREATE_OBJECT for volume label
semaphore.
ACTION Determine cause of error from CREATE_OBJECT and
correct.
---------------------------------------------------------------
347 MESSAGE A failure was received from
CREATE_BAD_SECTOR_TABLE.
CAUSE Error returned from CREATE_BAD_SECTOR_TABLE.
ACTION Determine cause of error from
CREATE_BAD_SECTOR_TABLE and correct.
---------------------------------------------------------------
348 MESSAGE A failure was received from XM_INITXM.
CAUSE Error from STARTGOLDENXID, transaction management
routine.
ACTION Determine cause of error from STARTGOLDENXID and
correct.
---------------------------------------------------------------
349 MESSAGE A failure was received from XM_INITXM.
CAUSE Error from ENDGOLDENXID, transaction management
routine.
ACTION Determine cause of error from ENDGOLDENXID and
correct.
---------------------------------------------------------------