HP 3000 Manuals HP 3000 Manuals
Chapter 85 Workstation Configuration
(TTUTIL)
--------------------------------------------------------------
The error messages listed occur while entering data for a terminal-type
or printer-type file. Messages are displayed in inverse video on the
bottom line of the screen. If the error(s) are related to a field (or
fields) on the screen, the fields are highlighted in full bright, inverse
video. If more than one field contains an error, only the error message
for the first highlighted field is displayed.
---------------------------------------------------------------
MESSAGE Character already has other function.
CAUSE The character entered has been defined elsewhere to
have a different special meaning. Each character
can have only one special function.
ACTION Choose a different character for this special
function, or release this character for use by
selecting a different character for the other
special function.
---------------------------------------------------------------
MESSAGE Character value out of range.
CAUSE The character input was out of the range of
characters allowed for that function.
ACTION Input a character within the range.
---------------------------------------------------------------
MESSAGE File is damaged; checksum error.
CAUSE The file has been damaged so that the checksum is
no longer valid. The utility still reads the data
from the file into the work area, and when saving
the data back to the file, a correct checksum is
generated.
ACTION Press Enter again to go to the form selected.
Verify the data on the screen.
---------------------------------------------------------------
MESSAGE File is not a valid VFC file.
CAUSE The file name specified is not a valid VFC file.
ACTION Specify a file which is a VFC file.
---------------------------------------------------------------
MESSAGE File is not a valid terminal type file.
CAUSE The file specified is not a valid terminal-type
file.
ACTION Specify a file that is a valid terminal-type file.
---------------------------------------------------------------
MESSAGE Invalid file name.
CAUSE The file name specified does not meet the
requirements for an HP3000 file name. It might be
because the name starts with a non-alphabetic
character or contains non-alphanumeric characters.
ACTION Enter a valid file name.
---------------------------------------------------------------
MESSAGE File converted to MPE XL format.
CAUSE Informational message only.
ACTION An action is not required.
---------------------------------------------------------------
MESSAGE File System Errors.
CAUSE If a file system error occurred when attempting to
open the file specified, the file system error
message is displayed in the error window.
ACTION An action is not required.
---------------------------------------------------------------
MESSAGE Invalid file option.
CAUSE The file option given was not C, M, or V.
ACTION Enter a valid file option.
---------------------------------------------------------------
MESSAGE Invalid form identifier.
CAUSE The letter entered in the form specifier field is
not one of the known form identifiers.
ACTION Enter one of the listed form identifiers in the
field.
---------------------------------------------------------------
MESSAGE Invalid number.
CAUSE You attempted to input a character in numerical
format, but the number was not an integer.
ACTION Input a valid number.
---------------------------------------------------------------
MESSAGE Maximum number of nn characters allowed is nn.
CAUSE You have input more than the maximum allowed number
of characters for the specified function.
ACTION Reduce the number to less than or equal to the
maximum specified in the error message.
---------------------------------------------------------------
MESSAGE Missing character.
CAUSE In the input of a string, the program is expecting
another character, but none follows. This is most
likely caused by two commas in a row, or a comma at
the end of a line without the ampersand.
ACTION Remove the extra comma, or insert the appropriate
character.
---------------------------------------------------------------
MESSAGE Modification of data is not allowed.
CAUSE Enter was pressed after choosing the View file
option. In View mode, modification of data is not
allowed.
ACTION Use only the soft keys.
---------------------------------------------------------------
MESSAGE MPE/V termtype file; use Form X to convert to MPE
XL format.
CAUSE The terminal-type file name entered in the Terminal
Type File Name field is in MPE V format.
ACTION Convert the MPE V termtype file to MPE/iX format.
---------------------------------------------------------------
MESSAGE Response must be in the range from nn to nn.
CAUSE The field contains a value that is not within the
range specified.
ACTION Enter a value within the correct range.
---------------------------------------------------------------
MESSAGE Response must be None, Line, Page, or Both.
CAUSE The field requires N, L, P, or B as a valid
response, but a different value was input.
ACTION Change the value to N, L, P, or B.
---------------------------------------------------------------
MESSAGE Response must be ON or OFF.
CAUSE The only valid entries for this field are ON and
OFF, but some other value was entered.
ACTION Change the value to either ON or OFF.
---------------------------------------------------------------
MESSAGE Response must be YES or NO.
CAUSE The field requires either a Y or an N as a valid
response, but a different value was input.
ACTION Change the value to a Y or N.
---------------------------------------------------------------
MESSAGE Termtype file is already in MPE XL format.
CAUSE Because the terminal-type file is already in MPE/iX
format, there is no reason to convert it to MPE/iX
format.
ACTION An action is not required.
---------------------------------------------------------------
MESSAGE The field can only contain digits.
CAUSE The field is designed to accept only positive
integers. The value entered contains characters
other than digits.
ACTION Enter a positive integer in the field.
---------------------------------------------------------------
MESSAGE The required field is empty.
CAUSE The specified field requires a value and nothing
was entered.
ACTION Enter a value in the field.
---------------------------------------------------------------
MESSAGE There is no next form.
CAUSE NEXT FORM was pressed when at the last form menu,
and there is no next form.
ACTION Do not press NEXT FORM at the last form.
---------------------------------------------------------------
MESSAGE There is no previous form.
CAUSE PREV FORM was pressed when at the Main Menu,
or when the VFC option was selected (RUN
TTUTIL.PUB.SYS). There is no previous form.
ACTION Do not press PREV FORM at the Main Menu, or when
the VFC option is selected.
---------------------------------------------------------------
MESSAGE There is no VFC defined.
CAUSE You specified V for the View file option and to go
to the VFC Menu, but this terminal-type file does
not have a VFC file associated with it.
ACTION Specify a different menu.
---------------------------------------------------------------
MESSAGE This key is invalid when no file is selected.
CAUSE The function key pressed is invalid when no file
has been specified.
ACTION Specify a file name first, or press a valid
function key.
---------------------------------------------------------------
MESSAGE This option is invalid when no terminal type is
defined.
CAUSE You used N, the Name Only option, when using the
VFC entry point. Therefore, there is no
terminal-type file to store the name.
ACTION Enter another option (C, M, V) in the VFC Head
Menu.
---------------------------------------------------------------
MESSAGE This option cannot be selected. The termtype
currently displayed is not a printer termtype file.
CAUSE The indicated field(s) contain invalid data.
ACTION Either erase the indicated fields or go to another
screen. Enter another option (C, M, V) in the VFC
Head Menu.
---------------------------------------------------------------
MESSAGE This option cannot be changed. The termtype
currently displayed is a Network Printer termtype
file, and this option is non-configurable for this
type of file.
CAUSE You attempted to modify a terminal-type file whose
attributes cannot be reconfigured.
ACTION Enter the previous value for the indicated fields
again, or go to another screen. Enter another
option (C, M, V) in the VFC Head Menu.
---------------------------------------------------------------
MESSAGE Unknown character.
CAUSE The character input does not match one of the
accepted character input formats, or the character
mnemonic cannot be found in the recognized list.
ACTION Input a valid character.
---------------------------------------------------------------
MESSAGE Unknown character input format.
CAUSE You attempted to input a character, but the
character could not be determined.
ACTION Input a valid character.
---------------------------------------------------------------
MESSAGE Unknown string input format.
CAUSE You attempted to input a string, but the input
could not be decoded.
ACTION Enter in the correct string.
---------------------------------------------------------------
MESSAGE User does not have write access to file.
CAUSE You specified M, for the Modify file option, but
you do not have write access to the file.
Therefore, you cannot modify it.
ACTION Specify a different file, or use the View option.
---------------------------------------------------------------
MESSAGE WARNING: data not saved.
CAUSE You tried to exit or specify another file name
after modifying the current file but without saving
the modifications made.
ACTION Press SAVE DATA if you want to save the
UUmodifications. If not, type EXIT at the command
line or press RETURN a second time, to perform the
desired operation.
---------------------------------------------------------------