Commands HEADOFF thru LISTF

• HEADOFF
• HEADON
• HELLO
• HELP
• IF
• INPUT
• JOB
• JOBFENCE
• JOBPRI
• JOBSECURITY
• LDISMOUNT
• LIMIT
• LINK
• LISTACCT
• LISTDIR (UDC)
• LISTEQ
• LISTF

HEADOFF

Syntax

  HEADOFF ldev

Parameters

ldev

The logical device number of the printer affected by the command.

Operation Notes

Use

Example

  HEADOFF 6

Related Information

Commands

HEADON

Manuals

Performing System Operation Tasks

HEADON

Syntax

  HEADON ldev

Parameters

ldev

The logical device number of the printer affected by the command.

Operation Notes

Use

Example

  HEADON 6

Related Information

Commands

HEADOFF

Manuals

Performing System Operation Tasks

HELLO

Syntax

  HELLO [sessionname,]username[/userpass].acctname[/acctpass]
      [,groupname[/grouppass]]
    [;TERM={ termtype | termname }]
    [;TIME=cpusecs]
    [;PRI={ BS | CS | DS | ES }]
    [{;INPRI=inputpriority | ;HIPRI }]
    [;INFO=ciinfo] [;PARM=ciparm]

Parameters

sessionname

Arbitrary name used in conjunction with username and acctname parameters to form a fully qualified session identity. The name must contain from one to eight alphanumeric characters, beginning with an alphabetic character. Default is that no session is assigned.

username

User name, established by the account manager, that allows you to log on to this account. The name must contain from one to eight alphanumeric characters, beginning with an alphabetic character.

userpass

User password, optionally assigned by the account manager. The password must contain from one to eight alphanumeric characters, beginning with an alphabetic character. The user password must be preceded by a slash (/).

acctname

Account name as established by the system manager. The name must contain from one to eight alphanumeric characters, beginning with an alphabetic character. The acctname parameter must be preceded by a period (.).

acctpass

Account password, optionally assigned by the system manager. The password must contain from one to eight alphanumeric characters, beginning with an alphabetic character. The account password must be preceded by a slash (/).

groupname

Group name to be used for the local file domain and the CPU and connect-time charges as established by the account manager. The name must contain from one to eight alphanumeric characters, beginning with an alphabetic character. Default is your home group if you are assigned one by the account manager. (Required if a home group is not assigned.)

grouppass

Group password optionally assigned by the account manager. The password must contain from one to eight alphanumeric characters beginning with an alphabetic character. The grouppass parameter is not needed to log on to your home group. The group password must be preceded by a slash (/).

termtype or termname

Determines terminal type characteristics. The termtype parameter determines the type of terminal used for input. MPE/iX uses this parameter to determine device-dependent characteristics such as delay factors for carriage returns. It must be 10 or 18. The default value for termtype is assigned by the system supervisor during system configuration. This is a required parameter to ensure correct listings if your terminal is not the default termtype.

The termname parameter is the name of the file containing the desired terminal-type characteristics. The file cannot have a lockword or reside on a user volume.

Users of the workstation configurator are allowed to create terminal-type files. The proper and efficient operation of a specific device by a user-created terminal type is the responsibility of the user. The workstation configurator utility allows the user to specify characteristics of the terminal, including data flow control, block mode, read trigger, special characteristics, echo, line feed, parity, and printer control.

cpusecs

Maximum CPU-time that a session can use, entered in seconds. When the limit is reached, the session is aborted. It must be a value from 1 to 32767. To specify no limit, enter a question mark (?), UNLIMITED, or omit the parameter. Default is no limit.

BS, CS, DS, or ES

The execution priority queue that MPE/iX uses for your session, and also the default priority for all programs executed within the session. BS is the highest priority, ES is the lowest. If you specify a priority that exceeds the highest priority permitted for your account or user name by the system, MPE/iX assigns the highest priority possible below BS. DS and ES are intended primarily for batch jobs; their use for sessions is generally discouraged. For information on the guidelines for these priority queues, refer to the TUNE command. Default is CS.

CAUTION: Use care in assigning the BS queue. Processes in this priority class can lock out other processes.

inputpriority or HIPRI

Determines the input priority of the job. The inputpriority option is the relative input priority used in checking against access restrictions imposed by the jobfence. The inputpriority option takes effect at logon time and must be from 1 (lowest priority) to 13 (highest priority). If you supply a value less than or equal to the current jobfence set by the system operator, the session is denied access. Default is 8.

When logging on, the HIPRI option is used to either override the system jobfence or to override the session limit. When using the HIPRI option to override the jobfence, the system first checks to see if you have system manager (SM) or system operator (OP) capability. If you have either of these capabilities, you are logged on and your INPRI defaults to the system's jobfence and execution limit. If you do not have either of these capabilities, the system attempts to log you on using INPRI=13 and succeeds if the jobfence is 12 or less, and if the session limit is not exceeded. Only users with SM or OP capability can use the HIPRI option to override the session limit to log on. Use of the HIPRI option without SM or OP capability causes the following warning to be displayed:

MUST HAVE 'SM' OR 'OP' CAP. TO SPECIFY HIPRI,
MAXIMUM INPRI OF 13 IS USED (CIWARN 1460)

ciinfo

An INFO string to be passed to the command interpreter. For the MPE/iX CI, it is the first command to be executed by the command interpreter. This parameter replaces the ( ) COMMAND
LOGON command and approximates its function. The ( ) COMMAND
LOGON command caused the session to terminate after executing the specified command. In contrast, the ciinfo parameter does not terminate the session unless ciparm is set to 1, 3, or 5.

Running the CI as a child process in this way restricts the flexibility of ciparm. More flexibility is available by running the CI as a standalone program.

ciparm

The command interpreter parameter number you wish to use. The MPE/iX command interpreter accepts the numbers listed below. If you enter any other value, it is treated as zero (0).

0, 2, 4

Executes logon UDCs and displays the CI banner and the welcome message. This is the default.

1, 3, 5

Same as 0, but the CI terminates after processing the INFO= string. If the INFO= string is not specified, the CI terminates after executing the first user-supplied command.

-1

Prohibits cataloging of UDCs and suppress the display of the CI banner and the welcome message. Invoking this level requires system manager (SM) capability.

-2

Same as -1, but the CI terminates after processing the info= command. Invoking this level requires system manager (SM) capability.

The MPE/iX CI distinguishes between ciparms 1, 3, 5 and 0, 2, 4 when it is run from within the CI, that is, after the session has logged on.

If a user without SM capability uses -1 or -2, the system substitutes a parameter value of 0 and does NOT display an error message.

Operation Notes

  MPE XL:HELLO USER.TECHPUBS
  HP3000 Release: X.50.40  User Version : X.50.40
    THU, DEC 8, 1994, 1:15 PM
  MPE/iX HP31900 B.78.11 Copyright Hewlett-Packard 1987.
    All rights reserved.
  :

  CPU=1. CONNECT=1. THU, DEC 8, 1994, 1:50 PM

• Group name

• One or more passwords

• Terminal type code

Use

Group Name

  MPE iX:HELLO USER.TECHPUBS,MYGROUP

Passwords

  MPE iX:HELLO USER.TECHPUBS,XGROUP/XPASS

Terminal Types

  MPE iX:HELLO USER.TECHPUBS;TERM=10

Example

  MPE iX:

  :

  MPE iX:HELLO ALPHA,USER.TECHPUBS,XGROUP/XPASS
  HP3000 Release: X.50.40  User Version : X.50.40
    MON, DEC 12, 1994, 7:15 AM
  MPE/iX HP31900 B.78.11 Copyright Hewlett-Packard 1987.
    All rights reserved.
  :

Related Information

Commands

BYE

Manuals

None

HELP

Syntax

  HELP [{ udcname commandname [{ keyword ,ALL }]
    commandfilename errormessage programfilename
    function name variable name
    SUMMARY CLASS HELPSTUDY
    EXPRESSIONS | VARIABLES | OPERATORS | FUNCTIONS }]

  >commandname {space or comma} [{ keyword ,ALL }]

    HELPMENU
    SUMMARY
    CLASS
    HELP
    HELPSTUDY

Parameters

<omitted>

If you specify the HELP command with no parameters, you enter the help facility subsystem in interactive mode. To return to the CI, enter E or EXIT. Refer to "Operation Notes."

udcname

Any existing UDC. To display all UDCs within a UDC file, specify the PRINT command. Refer to commandname.

commandname

Any MPE/iX command. MPE/iX displays the command name and syntax. In addition, a list of keywords for that command is displayed.

The HELP command also provides help on UDCs, command files, or program files. The search order is UDCs, built-in commands (MPE/iX), command files, and then program files. The search order for UDC's is user level, account level, and system level. The search order for command files and program files is determined by the contents of the CI variable HPPATH. If the user's HPPATH does not contain the name of the current group, the user can print a command file from the current group, but cannot get help information.

For UDCs and command files, help displays the text of the user command, unless the file contains the NOHELP option. In those cases, the display is suppressed. In the case of program files, help displays a header identifying it as a program file and the fully qualified file name of the program file.

function name

Any CI evaluator function, eg: FINFO

keyword

One of the keywords described under the command parameter. All commands have the following keywords:

PARMS

PARMS is short for parameter. Lists all parameters of the specified command.

OPERATION

Describes the use of the specified command.

EXAMPLE

Displays an example showing usage of the specified command.

ALL

Displays all parameters, operation information, and an example of the command.

variable name

Any CI predefined variable, eg: HPLASTJOB

command- filename

Any existing command file. Refer to commandname, "Operation Notes," and "Examples."

errrormessage

Any MPE/iX error message. The keywords are:

CIERRnn

program- filename

Any existing program file. Refer to commandname, "Operation Notes," and "Examples."

SUMMARY

A brief summary of changes found in MPE/iX, including a quick overview of the operation of the help facility.

CLASS

A list of MPE/iX commands by functional class.

HELPSTUDY

A beginner's guide designed to familiarize novice users with the fundamentals of MPE/iX commands and command syntax.

EXPRESSIONS

A description of CI expresssions

FUNCTIONS

A list of all CI evaluator functions

VARIABLES

A list of all CI predefined variables

OPERATORS

A list of expression operators, like +, -, etc.

HELP

The help facility entry on the HELP command.

ALL

Displays the entire table of contents and the contents of each keyword for the HELP command.

EXIT

Exits the help subsystem. Help for the CI EXIT command is not available in interactive mode. To get help for the CI EXIT command, specify the direct mode in the form HELP EXIT ALL.

Operation Notes

  :HELP
  >FINFO
  Syntax:   FINFO(filename, option)
  
  Defn:     A CI evaluator function that returns information about
            the specified file.
  Type:     String, integer, or Boolean depending upon option.
  
  Example:  FINFO('x.pub',"EXISTS")
  Result:   TRUE
  Example:  FINFO('jeff',"eof")
  Result:   71495
  
  The following table summarizes the options of the FINFO function.
  The description includes the option number, one or more aliases,
  the data type, and a brief description of the option.
  
  Num  Alias            Data Type   Option Description
  ---  -----            ---------   ------------------
   0   EXIST            Boolean     Existence of file
   
   1   FILENAME ONLY    String      File name
  (24/225) Continue?

  :HELP
  >HELP FINFO
        ^
  Can't find this keyword.

  HELP ABORT
  ABORT
  
       Aborts current program or operation.
  
  Syntax
  
       ABORT
  
  KEYWORDS: PARMS,OPERATION,EXAMPLE
  :

Use

Examples

  :HELP LISTFILE PARMS

  :HELP STORE EXAMPLES

  :HELP
  >STORE EXAMPLES

  :HELP VARIABLES
  Several global variables have been pre-assigned by
  the command interpreter.  They may be used anywhere you would use
  your own variables.
  
  All global variables are listed in the table below. To get help
  with a specific variable, at the colon (:) prompt type "HELP"
  followed by the variable name, for example, "HELP HPCIDEPTH".
  At the Help facility prompt (>), simply type the variable name,
  for example, "HPCIDEPTH".
  
  Global Variable Types
  =================================================================
        R      READ ONLY variable (cannot be modified).
        W      READ/WRITE variable (can be modified).
       JCW     A standard MPE/iX JCW.
        I      Integer format.
        B      Boolean format (TRUE/FALSE).
  (24/225) Continue?

  HELP LINKALL.TEST.UI
  User-Defined Command File: LINKALL.TEST.UI
  
  Parm streamflag=...
  ...

  HELP VERSION.PUB
  program file: VERSION.PUB.SYS

  listf
  option NOHELP
  showme
  *****

Related Information

Commands

None

Manuals

System Startup, Configuration, and Shutdown Reference Manual

IF

Syntax

  IF expression [THEN]

Parameters

expression

Logical expression, consisting of operands and relational operators. The operators listed in Table 7-1 "Logical Operators - The IF Command" may be incorporated in expression.

Operation Notes

NOTE: You may not write an IF construct in such a way that it physically crosses from one user command (UDCs or command files) to another.

Use

Example

  !CONTINUE
  !PASXL MYPROG,MYUSL
  !IF JCW>=FATAL THEN
  !  TELL USER.TECHPUBS;COMPILE FAILED
  !ELSE
  !  TELL USER.TECHPUBS;COMPILE COMPLETED
  !ENDIF

Related Information

Commands

CALC, ELSE, ELSEIF, ENDIF, WHILE, ENDWHILE, ESCAPE, RETURN

Manuals

Appendix B, "Expression Evaluator Functions"

INPUT

Syntax

  INPUT [NAME=] varname [;PROMPT=prompt] [;WAIT=seconds]
    [;READCNT=chars]

NOTE: This command follows the optional MPE/iX command line syntax. Refer to "Optional Format for MPE/iX Commands" at the beginning of this chapter.

Parameters

varname

Any variable (that can be set with SETVAR) in which the input string from $STDIN is stored. If varname does not already exist, INPUT creates it.

prompt

The prompt string that is to be displayed on the standard listing device. If prompt is omitted, nothing displays, but INPUT then waits for an input value to store in varname. To include delimiters, for example, a comma (,) or semicolon (;) as part of the prompt string, you must surround the entire prompt string with quotation marks (" or ").

seconds

A positive value specifying the number of seconds for a timed read. If a value is assigned to seconds, the prompt waits seconds for input and then terminates the command. The default is zero, no time limit.

chars

The number of characters you want read from $STDIN. If chars is specified as a negative number, INPUT uses the absolute integer value. The maximum allowed (and the default) is the maximum size of a CI variable, which is currently 1024 characters.

Operation Notes

NOTE: If a colon (:) is read by the INPUT command at any level other than the root level CI, the error message END OF FILE ON INPUT. (CIERR 900) is returned.

NOTE: The INPUT command does not evaluate an expression before assigning its value to varname. The command recognizes only strings. Expressions such as 9 + 3 are treated as strings, even though they are not surrounded by quotation marks (" or ").

• If varname already exists and you enter a null (a Return), then the value of varname remains unchanged.

• The same thing happens if varname exists and seconds or HPTIMEOUT expires before a value for varname is entered. In this case, however, a warning occurs, and CIERROR is set to 9003.

• If varname does not exist and a null (a Return) is entered for the variable value, then varname is created and set to null ("").

• If varname does not exist and seconds or HPTIMEOUT expires, then varname is created and set to null (""), and CIERROR is set to 9003.

• If the timed read expires due to the value of the HPTIMEOUT variable, for example, HPTIMEOUT=1 (in minutes) and the user executes INPUT bleep,,65, then the session is logged off.

Use

Examples

  INPUT bleep
  SETVAR bleep !bleep

  INPUT MYVAR <FILEONE

  SETVAR EOF FINFO(HPSTDIN, 'EOF')
  WHILE SETVAR (EOF, EOF-1) >=0 DO
    INPUT MYVAR
    ...
  ENDWHILE

  INPUT BLEEP,>
  >ABC Return
  SETVAR BLEEP !BLEEP 

Related Information

Commands

DELETEVAR, SETVAR, SHOWVAR, INPUT( ) function

Manuals

Using the HP 3000 Series 900: Advanced Skills

JOB

Syntax

  JOB[ jobname,] username[/userpass].acctname[/acctpass]
      [,groupname[/grouppass]]
    [;TIME=cpusecs] [;PRI= BS | CS | DS | ES]
    [;INPRI=inputpriority | ;HIPRI] [;RESTART] [;JOBQ=queuename]
    [;OUTCLASS=[[DEVICE][,[OUTPUTPRIORITY][,NUMCOPIES]]]]
    [;TERM={termtype}] [;PRIVATE][;SPSAVE]

Parameters

jobname

Arbitrary name used with username and acctname parameters to form a job identity. The name must contain from one to eight alphanumeric characters, beginning with an alphabetic character. Default is that no job name is assigned.

username

User name, established by the account manager, that allows you to log on to this account. The name must contain from one to eight alphanumeric characters, beginning with an alphabetic character.

userpass

User password, optionally assigned by account manager. The password must contain from one to eight alphanumeric characters, beginning with an alphabetic character. If a password exists, but is not supplied in the command syntax, the STREAM command will prompt you for it if:

• The STREAM command is invoked from a session.

• Neither $STDIN nor $STDLIST is redirected.

• The JOB command is a first level JOB command (it is not nested within a second level STREAM command).

If the password is supplied in the command syntax it must be preceded by a slash (/).

acctname

Account name as established by the system manager. The name must contain from one to eight alphanumeric characters, beginning with an alphabetic character. The acctname parameter must be preceded by a period (.).

acctpass

Account password, optionally assigned by the system manager. The password must contain from one to eight alphanumeric characters, beginning with an alphabetic character. If a password exists, but is not supplied in the command syntax, the STREAM command will prompt you for it if:

• The STREAM command is invoked from a session.

• Neither $STDIN nor $STDLIST is redirected.

• The JOB command is a first level JOB command (it is not nested within a second level STREAM command).

If the password is supplied in the command syntax it must be preceded by a slash (/).

queuename

The name of the job queue the job will execute in. The default job queue is HPSYSJQ, which is a global queue for all jobs not associated with an individual job queue

groupname

Group name to be used for the local file domain and for CPU-time charges, as established by the account manager. The name must contain from one to eight alphanumeric characters, beginning with an alphabetic character. Default is home group if one is assigned. (Required if a home group is not assigned.)

grouppass

Group password, optionally assigned by the account manager. The password must contain from one to eight alphanumeric characters, beginning with an alphabetic character. The group password is not needed when you log on to your home group. It is needed when you log on under any other group for which a password exists. If a password is needed, but is not supplied in the command syntax, the STREAM command will prompt you for it if:

• The STREAM command is invoked from a session.

• Neither $STDIN nor $STDLIST is redirected.

• The JOB command is a first level JOB command (it is not nested within a second level STREAM command).

If the password is supplied in the command syntax it must be preceded by a slash (/).

cpusecs

Maximum CPU time allowed job, in seconds. When this limit is reached, the job is aborted. This must be a value from 1 to 32,767. To specify no limit, enter a question mark or UNLIM, or omit this parameter. Default is a system-configured job limit.

BS, CS, DS, or ES

The execution priority queue that the command interpreter uses for your session. This is also the default priority for all programs executed within the session. BS is the highest priority; ES is the lowest. If you specify a priority that exceeds the highest priority permitted for your account or user name by the system, MPE/iX assigns the highest priority possible below BS. DS and ES are intended primarily for batch jobs; their use for sessions is generally discouraged. DS is the default and the maximum priority, unless modified by system management.

NOTE: Use care in assigning the BS queue. Processes in this priority class can lock out other processes. For information on the guidelines for these priority queues, refer to the TUNE command in this chapter.

inputpriority or HIPRI

Determines the input priority of the job. The inputpriority parameter is the relative input priority used in checking against access restrictions imposed by the jobfence. The inputpriority parameter takes effect at logon time and must be from 1 (lowest priority) to 13 (highest priority). If you supply a value less than or equal to the current jobfence set by the system operator, the job is denied access. Default is 8.

The HIPRI option is used for two different purposes when logging on. It can be used to override the system jobfence, or it can be used to override the job limit. When using the HIPRI option to override the jobfence, the system first checks to see if you have system manager (SM) or system operator (OP) capability. If you have either of these capabilities, you are logged on and your INPRI defaults to the system's jobfence and execution limit. If you do not have either of these capabilities, the system attempts to log you on using INPRI=13 and succeeds if the jobfence is 12 or less, and if the job limit is not exceeded. In attempting to override the job limit (to log on after the maximum number of jobs set by the operator has been reached), you can specify HIPRI, but to do so you must have either SM or OP capability. The system does not override the job limit automatically. Use of the HIPRI option without SM or OP capability causes the following warning to be displayed:

MUST HAVE 'SM' OR 'OP' CAP. TO SPECIFY HIPRI,
MAXIMUM INPRI OF 13 IS USED (CIWARN 1460)

RESTART

Request to restart a spooled job that has been interrupted by the system termination/restart. This parameter takes effect automatically when the system is subsequently restarted with the START RECOVERY option. The effect is to resubmit the job in its original form.

This parameter applies only to jobs initiated on spooled input devices. It is ignored for other jobs. Default is that spooled jobs are not restarted after system termination/restart.

device

Class name or logical device number (ldev) of the device to receive listing output. You cannot specify a magnetic tape unit. If the parameter is not a valid LDEV or class name, an error is generated. Default is defined in the system configuration.

NOTE: Nonshareable device (ND) file access capability is required in order to use this parameter.

outputpriority

The output priority for job list file, if destined for spooled line printer. This parameter is used to select the next spooled device file (on disk) for output, from among all those contending for a specific printer. Must be a value from 1 (lowest priority) to 13 (highest priority). When outputpriority is 1, output is always deferred. To have output printed from disk, use an outputpriority of 2 or greater.

This parameter applies only to output destined for spooled output devices, and is ignored for other output. Default is 8.

numcopies

Number of copies of job listing to be produced. This parameter applies only when listing is directed to a spooled device, and is ignored in other cases. If the number of copies is less than 1, a warning is issued. The command still executes with the default value of 1. If the number of copies is greater than 127, an error message is printed, and 127 copies are printed. Default is 1.

termtype

The TERM= option is obsolete now that the JOB command cannot be used interactively. In order to maintain backward compatability, the termtype parameter is still parsed, but it is not used. If the TERM= option is used, a warning message will be displayed.

PRIVATE

The PRIVATE option forces the job output $STDLIST to be a private spoolfile. The spoolfile is only accessible to privileged users on the system. Private spoolfiles may not be saved or copied. They may only be purged, printed, or (within limits) altered.

SPSAVE

If this option is used, the resulting job output $STDLIST spoolfile is created with an SPSAVE disposition. This means that the spoolfile is not to be purged after the last copy of it has been printed, but is instead retained in the OUT.HPSPOOL group. SPSAVE may not be used if PRIVATE has been specified.

NOTE: The "&" symbol has no meaning to the input spooler when it reads records because the CI is not involved at that point.

Operation Notes

• Job number, as assigned by MPE/iX to identify the job.

• Date and time.

• "HP 3000," and the modified and base MPE/iX version.update.fix numbers.

• Logon group name.

• User, account, and/or group passwords.

• When you enter the JOB command through a device other than a terminal, and the standard input device is different from the standard listing device, MPE/iX does not echo passwords.

• When the standard listing device is a line printer and you do not specify a file group name, central processor time limit, execution priority, and/or input priority in the JOB command, the default values assigned by MPE/iX for the omitted parameters appear on the job listing.

• The STREAM command is invoked from a session.

• Neither $STDIN nor $STDLIST is redirected.

• The JOB command is a first level JOB command (it is not nested within a second level STREAM command).

Use

Example

  RUN EDITOR.PUB.SYS
  /ADD
     1 !JOB WXYZ,WRITER.TEC
     2 !EDITOR
     3 TEXT ABC
     4 LIST ALL,OFFLINE
     5 EXIT
     6 !EOJ
     //
  /KEEP MYJOB
  /EXIT
  :STREAM MYJOB

  STREAM
  >!JOB USER.TECHPUBS;OUTCLASS=12

Related Information

Commands

ABORTJOB, ALTJOB, BREAKJOB, SUSPENDJOB, RESUMEJOB, JOBFENCE, JOBPRI, STREAM, STREAMS, SHOWDEV, NEWJOBQ, LISTJOBQ

Manuals

Using the HP 3000 Series 900: Advanced Skills
MPE/iX Intrinsics Reference Manual

JOBFENCE

Syntax

  JOBFENCE priorityfence

Parameters

priorityfence

A number between 0 and 14, inclusive. Within this range, smaller numbers are less limiting; larger numbers more limiting.

Operation Notes

Use

Examples

  JOBFENCE 14
  16:18/#J7/34/DEFERRED JOB INTRODUCED ON LDEV #10
  16:18/#J8/35/DEFERRED JOB INTRODUCED ON LDEV #10

  SHOWJOB
  
  JOBNUM  STATE IPRI JIN  JLIST INTRODUCED JOB NAME
  #S26    EXEC        20  20    THU 4:17P  OPERATOR.SYS
  #J7     WAIT   D 8 10S  12    THU 4:18P  JOB1,FIELD.SUPT
  #J8     WAIT   D 8 10S  12    THU 4:18P  JOB2,FIELD.SUPT

  3 JOBS:
    0 INTRO
    2 WAIT; INCL 2 DEFERRED
    1 EXEC; INCL 1 SESSIONS
    0 SUSP
  JOBFENCE= 14; JLIMIT= 5; SLIMIT=16

  JOBFENCE 6
  
  16:21/#J7/34/LOGON FOR: JOB1,FIELD.SUPT ON LDEV #10
  16:21/#J8/35/LOGON FOR: JOB2,FIELD.SUPT ON LDEV #10

Related Information

Commands

ABORTJOB, ALTJOB, BREAKJOB, JOB, SUSPENDJOB, RESUMEJOB, JOBPRI, STREAM, STREAMS, SHOWDEV

Manuals

Using the HP 3000 Series 900: Advanced Skills
MPE/iX Intrinsics Reference Manual

JOBPRI

Syntax

  JOBPRI [maxsubqueue] [,defaultsubqueue]

Parameters

maxsubqueue

The maximum priority at which batch jobs are allowed to run. This overrides any job priority a user may have requested with the JOB command. This parameter may be ES, DS, CS, or zero. If zero is specified, no limit is imposed on batch jobs. Default is no change in maximum priority.

default- subqueue

The default execution priority for batch jobs, which may be ES, DS, or CS. This takes effect if a user does not specify an execution priority in the JOB command. Default is no change in execution priority.

Operation Notes

Use

Example

  JOBPRI 0

Related Information

Commands

TUNE, SHOWQ, ALTPROC

Manuals

Performing System Operation Tasks

JOBSECURITY

Syntax

  JOBSECURITY [{ HIGH | LOW }
    {;PASSEXEMPT= {NONE | USER | XACCESS | MAX} }]

Parameters

HIGH

Permits only the operator logged on at the console and users with SM capability to use job control commands.

LOW

Allows individual users to exercise control over their own jobs.

<omitted>

If you do not specify HIGH or LOW, the current job security status is displayed (high or low).

NONE, USER, XACCESS, or MAX

The PASSEXEMPT option set by the system manager, which has the following meaning:

NONE

All users must specify the required passwords to stream a job.

USER

Allows certain users to omit a job's password. The system manager can omit the password when streaming any job, account managers can omit passwords when streaming jobs that log onto their account and to which they have access, and users can omit passwords for jobs that match their logon identity and to which they have access.

XACCESS

Allows users with execute access to the job file to omit passwords when the job file logs on with the same identity as its owner or creator.

MAX

Sets both the USER and the XACCESS options of the PASSEXEMPT parameter. Specifying MAX is the only way to set both options since USER and XACCESS are otherwise mutually exclusive.

Operation Notes

Use

Example

  JOBSECURITY LOW

  :JOBSECURITY
  JOB SECURITY IS HIGH. PASSEXEMPT IS NONE.

  :JOBSECURITY ;PASSEXEMPT=USER
  :JOBSECURITY
  JOB SECURITY IS LOW. PASSEXEMPT IS USER.

  :JOBSECURITY ;PASSEXEMPT=XACCESS

  :JOBSECURITY
  JOB SECURITY IS LOW. PASSEXEMPT IS XACCESS.

  :JOBSECURITY ;PASSEXEMPT=USER
  Security Monitor is installed. Passexempt is MAX. (CIWARN 3128)

Related Information

Commands

ABORTJOB, ALTJOB, BREAKJOB, RESUMEJOB, JOBFENCE

Manuals

Performing System Operation Tasks

LDISMOUNT

Syntax

  LDISMOUNT [{ * | volumesetname }] [,groupname [.acctname]]

Parameters

* or <blank>

Specifies the home volume set for the group and account specified, or for the logon group and account if groupname or groupname.acctname is not specified.

volumesetname

An artificial component of a volume set name used to maintain backward compatibility with MPE V/E. The volumesetname can be a maximum of 8 characters.

groupname

Used only for compatibility with MPE V/E. The groupname can be a maximum of 8 characters.

acctname

Used only for compatibility with MPE V/E. The acctname can be a maximum of 8 characters.

Operation Notes

Use

Examples

  LDISMOUNT DATABASE.PAYROLL.ACCTNG

  VSRELEASESYS DATABASE.PAYROLL.ACCTNG

Related Information

Commands

MOUNT, , LMOUNT, DISMOUNT, DSTAT, VSRESERVE, VSRELEASE

Manuals

Volume Management Reference Manual

LIMIT

Syntax

  LIMIT [ [[ + | - ] numberjobs] [,[ + | - ] numbersessions] ]
    [;JOBQ=queuename]

Parameters

+

Increment the limit value

-

Decrement the limit value

numberjobs

The number of jobs.

numbersessions

The number of sessions.

<omitted>

If you specify no parameter, a message is displayed listing the current limits.

queuename

The name of the job queue whose limit is being changed or displayed.

Operation Notes

  CAN'T INITIATE NEW SESSIONS NOW

Use

Examples

  LIMIT 2,15
  
  SHOWJOB
  
  JOBNUM STATE IPRI JIN JLIST INTRODUCED JOB NAME
  
  #S24   EXEC        20 20    TUE 1:54A  OPERATOR.SYS
  #S26   EXEC       177 177   TUE 5:01A  CHEWY,RSPOOL.S
  #S96   EXEC QUIET  35 35    TUE 8:31A  SLIDES.SIMON
  
  3 JOBS:
      0 INTRO
      0 WAIT; INCL 0 DEFERRED
      3 EXEC; INCL 3 SESSIONS
      0 SUSP
  JOBFENCE= 6; JLIMIT= 2; SLIMIT= 15

  LIMIT,13

Related Information

Commands

HELLO, JOB, SHOWJOB, LISTJOBQ

Manuals

Performing System Operation Tasks

LINK

Syntax

  LINK [FROM=file [,file...] [;TO=destfile] ]
    [;RL=rlfile [,rlfile...]]
    [;XL=xlfile [,xlfile...]]
    [;CAP=caplist]
    [;NMSTACK=nmstacksize] [;NMHEAP=nmheapsize]
    [;UNSAT=unsatname]
    [;PARMCHECK=checklevel]
    [;ENTRY=entryname]
    [;NODEBUG] [;MAP] [;SHOW] [;SHARE]
    [;PRIVLEV=priv_level] [;PRI=pri_level]
    [;MAXPRI=max_pri_level

NOTE: This command follows the optional MPE/iX command line syntax. Refer to "Optional Format for MPE/iX Commands" at the beginning of this chapter.

Parameters

file

The name of an object file or a relocatable library file. It may be any binary file of type NMOBJ or NMRL. All relocatable objects in the FROM= specified list are merged to form the program file specified by destfile. If you omit this parameter, LINK merges the object modules in the file $OLDPASS.

The FROM=, RL=, and XL= parameters allow a series of file names. You may name each file individually, or you may provide an indirect file by preceding that file's name with the caret symbol (^).

destfile

The name of the program file (type NMPRG) where LINK places the resulting executable object module. If destfile does not exist, LINK creates a new one for you. If destfile does exist, it is destroyed and replaced by the object module created by the current link operation.

rlfile

The name of a relocatable library file (type NMRL) that resolves an external reference made by an object module in the FROM= file list. LINK searches the relocatable libraries in the RL list in the order in which you list them. If a module from one library calls a routine in another library and then that routine in turn refers to a module in the first library, you may need to include the first library twice so that LINK can resolve this "circular" reference.

The FROM=, RL=, and XL= parameters allow a series of file names. You may name each file individually, or you may provide an indirect file by preceding that file's name with the caret symbol (^).

xlfile

The name of an executable library (type NMXL). The loader searches every executable library in the XL list in an attempt to resolve external references that remain in a program file.

caplist

The list of capability attributes to be assigned to the program file. The program runs only if the group and account have matching capabilities. (The system manager or account manager assigns these capabilities to your group and account.) Permissible values are:

  BA  =  Local Batch Access
  IA  =  Interactive Access
  PM  =  Privileged Mode
  MR  =  Multiple RINs
  DS  =  Extra Data Segments
  PH  =  Process Handling

If you omit this parameter, the BA and IA capabilities are assigned to the program file by default.

nmstacksize

The maximum size, in bytes, to which the NM stack may grow. This must be a decimal number. The default is zero, which instructs MPE/iX to assign a system-defined constant as the value of nmstacksize.

nmheapsize

The maximum size, in bytes, to which the NM heap may grow. This must be a decimal number. The default is -1, which instructs the command to assign a system-defined constant as the value of nmheapsize.

unsatname

The name of a procedure that the loader substitutes in place of any external reference that cannot be resolved in a program file. If you omit this parameter and any external references remain unresolved, the loader reports a load-time error.

checklevel

An integer specifying the maximum level of checking that LINK performs in binding external references to procedures. All checking levels that are indicated in external references and procedure definitions are reduced (but never increased) to the specified level. If you omit this parameter, LINK sets the value to 3.

Permissible values for checklevel are defined in Table 7-4 "Checklevel Values".

If the checking level is restricted (reduced) and reportable type errors are detected, they are reported not as errors but as warnings.

Table 7-4 Checklevel Values

0	No parameter check.
1	Check of the symbol type descriptor.
2	Perform Level 1 checking, then check the number of arguments that the import procedure passed against the minimum and maximum range that were declared in the export procedure.
3	Perform Level 2 checking, then check the type of each argument that was passed.

entryname

The name (label) of the point within a program where execution begins. When you omit this parameter, the loader begins execution from the primary program entry point (which corresponds to a program's main procedure or outer block). However, by including the ENTRY= option, you may override this default value and begin execution from the specified entry point. If the loader fails to find a symbol that matches the entry point name, it reports a load-time error.

NODEBUG

Strips all symbolic debugging information from the resulting program file. If you omit this parameter, the file contains debugging information if the source file was compiled with this option.

MAP

Prints a symbol map to the list file, LINKLIST.

SHOW

Displays the name of each object module as it is being merged into the program file. You may include this option to verify the order in which LINK processes each module.

priv_level

Determines the privilege level used by the executable program file. This parameter changes the privilege level of all procedures in the symbol and export tables (of the relocatable object file) that were set during compilation.

The values for priv_level are:

0

system level access

1

unused

2

privileged level access

3

user level access

The default is that privilege levels are set during compilation.

pri_level

Specifies the execution priority that the program will have at run time. The pri_level has to be one of BS, CS, DS, ES, or a number between 100 and 255 inclusive. This value can be overridden by the PRI= keyword on the RUN command.

max_pri_level

Specifies the maximum execution priority that the program can have at run time. The max_pri_level has to be one of BS, CS, DS, ES, or a number between 100 and 255 inclusive.

SHARE

Specifies that data symbols should be exportable and importable (shared) in the resulting executable library.

Operation Notes

  RUN LINKEDIT.PUB.SYS;STDIN=SCRIPT

  FILE LINKOUT;DEV=LP
  RUN LINKEDIT.PUB.SYS;STDLIST=*LINKOUT

• The symbol map produced by the MAP option of the LINK command.

• The listing produced by the LISTPROG command.

• The listing produced by the LISTOBJ command.

• The listing produced by the LISTRL command.

• The listing produced by the MAP option of the ADDXL command.

• The listings produced by the LISTXL command.

  FILE LINKLIST;DEV=LP
  LINKEDIT
  LinkEd> LISTRL RL=LIBRL
  LinkEd> EXIT

Use

Examples

  LINK FROM=OBJCODE;TO=EXECPROG;NMSTACK=50000;MAP;SHOW

  LINK FROM=OBJCODE;TO=EXECPROG;RL=LINEDRAW,ARCDRAW;CAP=BA

  LINK FROM=A,MAIN; TO=MYPROG; SHARE; RL=LIBCSHR.LIB.SYS; XL=MYXL

Related Information

Commands

RUN, XEQ, LINKEDIT Utility

Manuals

HP Link Editor/XL Reference Manual
HP Link Editor/iX Technical Addendum

LISTACCT

Syntax

  LISTACCT [acctset] [,listfile] [;PASS]
    [;FORMAT={SUMMARY | BRIEF | DETAIL}]

Parameters

acctset

The accounts to be listed. The default is all accounts for system managers (SM). For all other users, the default is their logon account. Use the # symbol to specify a single numeric character. Use the ? symbol to specify a single alphanumeric character. Use the @ symbol to specify zero or more alphanumeric characters. By itself, @ represents all the members of a set. Each of these wildcard characters counts toward the eight character limit for group, account, and file names.

listfile

The name of the output file. The default is $STDLIST, a temporary file that cannot be overwritten by a BUILD command. It is automatically specified as a new ASCII file with variable-length records, closed in the temporary domain, and with user-supplied carriage-control characters (CCTL), OUT access mode, and EXC (EXCLUSIVE access) option. All other characteristics are the same as they would be with the FILE command default specifications.

PASS

Permits account managers and system managers to see the password.

FORMAT

Specifies one of several display formats, listed below.

SUMMARY

Provides a summary of the account information. If FORMAT is not specified, SUMMARY is the default.

BRIEF

Generates a list of account names only.

DETAIL

Displays all information associated with the account.

Operation Notes

Use

Examples

  LISTACCT HPXLII;PASS
  
     ...or...
  
  LISTACCT HPXLII;PASS;FORMAT=SUMMARY
  
  ********************
  ACCOUNT: HPXLII
  DISC SPACE: 754115(SECTORS)  PASSWORD: ACCTPASS
  CPU TIME  : 3330(SECONDS)    LOC ATTR: $00000000
  CONNECT TIME: 102(MINUTES)   SECURITY READ  : ANY
  DISC LIMIT: UNLIMITED                 WRITE : AC
  CPU LIMIT : UNLIMITED                APPEND : AC
  CONNECT LIMIT: UNLIMITED              LOCK  : ANY
  MAX PRI  : 150                      EXECUTE : ANY
  GRP UFID : $00D0001 $80001050 $00138A20 $00000008 $000001FA
  USER UFID: $00D4001 $80001050 $00138C20 $00000008 $000001FB
  CAP: AM,AL,GL,DI,CV,UV,LG,CS,ND,SF,IA,BA,PH,DS,MR,PM
  
  LISTACCT @;FORMAT=BRIEF
  
  ACCOUNT1
  ACCOUNT2
  BACCT1
  POSIX
  SYS
  
  LISTACCT POSIX;FORMAT=DETAIL
  
  ********************
  ACCOUNT       : POSIX
  PASSWORD      : **
  GID           : 50
  DISC SPACE    : 1163440(SECTORS)
  CPU TIME      : 199798(SECONDS)
  CONNECT TIME  : 1116561(MINUTES)
  DISC LIMIT    : UNLIMITED
  CPU LIMIT     : UNLIMITED
  CONNECT LIMIT : UNLIMITED
  MAX PRI       : 150
  LOC ATTR      : $00000000
  SECURITY      : R:ANY, W:ANY, A:ANY, L:ANY, X:ANY
  GRP UFID      : $055A0003 $48C0B6B8 $000066B4 $918008B5 $0077B2D9
  USER UFID     : $055A0004 $48C0B6B8 $000066B4 $918008B5 $0077B2DF
  CAP           : SM,AM,AL,GL,DI,OP,CV,UV,LG,PS,NA,NM,CS,ND,SF,BA,
                  IA,PM,MR,DS,PH

Related Information

Commands

LISTFILE, LISTGROUP, LISTUSER, NEWACCT, PURGEACCT, ALTACCT

Manuals

Performing System Management Tasks

LISTDIR (UDC)

  SETCATALOG HPPXUDC.PUB.SYS;SYSTEM;APPEND

Syntax

  LISTDIR [[DIR=]dir_name] [[FORMAT=]format_opt]

Parameters

dir_name

The name of the directory to list. The dir_name can be in MPE or HFS syntax; wildcards may be used. For example, /SYS/PUB, /SYS/PUB/dir@, ./abc/mydir, and @abc are valid examples of directory names. If dir_name is not specified, the default directory name is ./@ (all directories directly under your current working directory).

format_opt

An output format option. The option may be specified as a number or mnemonic. For example,

  FORMAT=2
  
  or
  
  FORMAT=DISC

If not specified, the default is FORMAT=6 (qualify).

Refer to the LISTFILE command for a complete description of each available format option.

Operation Notes

  LISTFILE dir_name ;FORMAT=format_opt ;SELEQ=[OBJECT=DIR] ;TREE

Use

Examples

Related Information

Commands

LISTFILE, FINDDIR (UDC)

Manuals

None

LISTEQ

Syntax

  LISTEQ [listfile]

Parameters

listfile

The name of the output file. The default is $STDLIST, a temporary file that cannot be overwritten by a BUILD command. It is automatically specified as a new ASCII file with variable-length records, closed in the temporary domain, and with user-supplied carriage-control characters (CCTL), OUT access mode, and EXC (EXCLUSIVE access) option. All other characteristics are the same as they would be with the FILE command default specifications.

Operation Notes

Use

Example

  LISTEQ
  
  FILE EQUATIONS
  
  FILE TAPE1;DEV=ATAPE
  FILE PP;ENV=LP2.ENV.OSE;DEV=EPOC
  FILE MYFILE,NEW;REC=-80,3,F,ASCII;DISC=5000;SAVE
  FILE POSIX=./mydir/myfile1

Related Information

Commands

FILE, RESET

Manuals

None

LISTF

Syntax

  LISTF [fileset] [,listlevel] [;listfile]

Parameters

fileset

Specifies the set of files to be listed. The default is @, which lists all files in your logon group. You may select the file(s) to be listed by using the fully or partly qualified form for fileset:

filename.groupname.accountname

You may use the @ to specify zero or more alphanumeric characters or, if used by itself, to denote all the members of a set. You may use the symbol # to specify one numeric character and the symbol ? to specify one alphanumeric character. The # and ? wildcard characters count toward the eight character limit for group, account, and file names.

listlevel

Specifies the amount and format of information to display for the file(s) you select. The default is 0, which displays only the file name. The listlevel of the LISTF command is equivalent to the format option of the LISTFILE command. The levels are described below in Table 7-5 "Format Options":

Table 7-5 Format Options

Listlevel	Displayed Information
-2	Displays the file's ACD (access control definition). System Managers can view the ACD for any file. Account Managers can view the ACD for files in that account. File creators can view the ACD for their files. Other users can view an ACD only if that ACD specifies that the user has RACD (read ACD) access.
-1	Shows only the file label in hexadecimal. The hexadecimal display generated by this format option only serves a diagnostic purpose in MPE/iX and is subject to change.
0	For each directory, this option displays PATH=The name of the file is displayed in a multicolumn format. This is the default.
1	Displays the file name, file code, record size, record format, and other file characteristics such as ASCII or binary records, carriage-control option, file type, current end-of-file location, and the maximum number of records allowed in the file.
2	Displays the file name, file code, record size, file type, current end-of-file location, and the maximum number of records allowed in the file. It also displays the blocking factor, number of sectors in use, number of extents currently allocated, and the maximum number of extents allowed.
3 -3	Displays the file name, record size, extent size, number of records, user's access rights, and other file characteristics including the date created, modified, and last accessed. The same information for MPE and HFS files is displayed except for the following differences: Fully qualified MPE file name is replaced by an absolute pathname. Creator field displays the fully qualified user ID of the file owner. For MPE groups, the SECURITY field displays SAVE; for entries other than MPE groups it is blank. All file access matrix fields are blank for anything other than MPE accounts, MPE groups, and files in an MPE group. The LOCKWORD field is omitted. The creator, group id, and label address are omitted in FORMAT=3. These can be obtained by specifying -3 if you have sufficient capability (AM or SM)
4	Displays the security matrix for the file. This includes account, group and file-level security, and the access rights for the user. For MPE groups and MPE accounts, the security matrix for group, account, and account-only are displayed. The rest of the fields of the file access matrix are blank. For HFS directories, and files within HFS directories, all the fields of the file access matrix are blank. In addition, LISTFILE displays the message ACD EXISTS.
5 -5	Shows LISTFILE,3 data and all file-specific data in LISTFILE,3 type format (KSAM, SPOOL, and symbolic links). If a file has no unique data, only the option 3 data is shown.
6	Shows the absolute pathname of the file.
7	Shows all file specific data in LISTFILE,5 type format, but does not show LISTFILE,3 data. If a file has no unique data, only the file name is displayed.
8	Shows all accessors of the files listed. Restrictions apply
9	Shows level 8 information and details about processes accessing the files including file locking data. Restrictions apply.
10	Shows level 1 information but in a wider format that allows for expression o larger file sizes. Infromation is also given on how each file is currenly being accessed; Exclusive, Read, Write or Store
11	Shows level 2 information but in a wider format that allows for expression of larger file sizes. Disk space occupied by each file is presented in kilobytes (KB) rather than 256 byte sectors.

listfile

The name of the output file to which the file information will be written. If you omit this parameter, the output appears on $STDLIST. If you specify listfile, the output is sent to a temporary file created for this purpose. The temporary file is a new ASCII file with variable length records, closed in the temporary domain, and with user supplied carriage control characters (CCTL), OUT access mode, and EXC (exclusive access) option. All other characteristics are identical to the FILE command default specifications. You may specify a different kind of file or backreference an existing file.

When you direct LISTF output to $STDLIST from a job, or when you direct the output to any non-disk device, a date and time stamp preceeds the data, and listlevel 0 data appears as one file per record rather than in the standard multi-column format.

Operation

  :FILE PRTR;DEV=LP
  :LISTF @.@,2;*PRTR

Use

Examples

  :LISTF
  
  FILENAME
  CLKLIST CLOCK  EDIRC  LINKCLK  LINKFROG  LINKLIST

  :LISTF L@,1
  ACCOUNT= HPXLII     GROUP=  DEVELOP
  
  FILENAME  CODE  ------------LOGICAL RECORD-------
                    SIZE  TYP        EOF      LIMIT

  L2                 80B  FA           2         12
  LINKCLK            72B  FA           1         11
  LINKFROG           72B  FA           1         11
  LINKLIST           72B  FA           8         18

  :LISTF L@,2
  ACCOUNT= HPXLII     GROUP=  DEVELOP
  
  FILENAME  CODE  ------------LOGICAL RECORD-----------  ----SPACE----
                    SIZE  TYP        EOF      LIMIT R/B  SECTORS #X MX
  LINKCLK            72B  FA           1         11   3        8   1 1
  LINKFROG           72B  FA           1         11   3        8   1 1
  LINKLIST           72B  FA           8         18   3        8   1 1

  :LISTF DOCMNTS,3
  ********************
  FILE DOCMNTS.DEVELOP.HPXLII
  
  FILE CODE : 0        FOPTIONS STD,ASCII,FIXED,NOCCTL
  BLK FACTOR: 16       CREATOR **
  REC SIZE: 80(BYTES)  LOCKWORD **
  BLK SIZE: 640(BYTES) SECURITYREAD  : ANY
  EXT SIZE: 25(SECT)           WRITE : ANY
  NUM REC: 501                APPEND : ANY
  NUM SEC: 165                 LOCK  : ANY
  NUM EXT: 7                  EXECUTE: ANY
  MAX REC: 501              **SECURITY IS ON
  MAX EXT: 7           FLAGS n/a
  NUM LABELS: 0        CREATED FRI, 21 SEP 1986, 11:55 AM
  MAX LABELS: 0        MODIFIED FRI, 21 SEP 1986, 12:34 PM
  DISC DEV #: 3        ACCESSED FRI, 21 SEP 1986, 12:46 PM
  SEC OFFSET: 0        LABEL ADDR **
  VOLSET    : MPEXL_SYSTEM_VOLUME_SET
      or
  VOLNAME   : MPEXL_SYSTEM_VOLUME_SET: MEMBER1
      or
  VOLCLASS  : MPEXL_SYSTEM_VOLUME_SET: DISC
      or
  CLASS     : DISC     LABEL ADDR: $00000010 $0010E014

  :LISTF L@,6
  LINKCLK.DEVELOP.HPXLII
  LINKFROG.DEVELOP.HPXLII
  LINKLIST.DEVELOP.HPXLII

  ********************
  FILE:  LINKCLK.DEVELOP.HPXLII
  ********************
  FILE:  LINKFROG.DEVELOP.HPXLII
  ********************
  FILE:  LINKLIST.DEVELOP.HPXLII

  :listfile hppxudc.pub.sys,8
  ********************
  FILE: HPPXUDC.PUB.SYS
  15 Accessors(O:15,P:15,L:0,W:0,R:15),Share
  #S265   MIKEP.HPE            P:2,L:0,W:0,R:2    LDEV: 49
  #S263   JEFFV,MGR.JVNM       P:3,L:0,W:0,R:3    LDEV: 47
  #S261   KROGERS.MPENT        P:2,L:0,W:0,R:2    LDEV: 50
  #S231   SUSANC.MPENT         P:2,L:0,W:0,R:2    LDEV: 46
  #S219   FAIRCHLD.MPENT       P:2,L:0,W:0,R:2    LDEV: 39
  #S214   CATHY,MGR.BOSS       P:2,L:0,W:0,R:2    REM : 15.14.16.198
  #J434   FTPMON,FTP.SYS       P:2,L:0,W:0,R:2    SPID: #O21905

  :listfile hppxudc.pub.sys,9
  ********************
  FILE: HPPXUDC.PUB.SYS
  5 Accessors(O:5,P:5,L:5,W:0,R:5),Share
  #S263   JEFFV,MGR.JVNM             P:3,L:3,W:0,R:3   LDEV: 47
   #P147   (LFCI.PUB.SYS)
     ACCESS: R-excl            REC#: 0                 FNUM: 13
     LOCKS: Owner   Waiter
            FLOCK
            OPEN
   #P154   (CI.PUB.SYS)
     ACCESS: R-excl            REC#: 0                 FNUM: 13
     LOCKS: none
   #P86    (JSMAIN.PUB.SYS)
     ACCESS: R-excl            REC#: 336               FNUM: 16
     LOCKS: Owner   Waiter
            FLOCK
     
  #J434   FTPMON,FTP.SYS             P:2,L:2,W:0,R:2   SPID: #O21905
   #P79    (CI.PUB.SYS)
     ACCESS: R-excl            REC#: 0                 FNUM: 14
     LOCKS: none
   #P47    (JSMAIN.PUB.SYS)
     ACCESS: R-excl            REC#: 336               FNUM: 15
     LOCKS: Owner   Waiter
            OPEN        FLOCK

  :LISTF@.TEST,10
  ACCOUNT=  SYS                 GROUP=  TEST


Name     Access Fcode Recsize Type     EOF    File Limit
          ERWS
SYSXTNTS               44     FB      11687     48806446
TEST2                 500     FA    1592197     10000000
TESTFILE              500     FA          0     10000000

  :LISTF@.TEST,11
  ACCOUNT=  SYS                 GROUP=  TEST

Name     Access Fcode Recsize Type     EOF    File Limit  Diskusage Exts
          ERWS
SYSXTNTS               44     FB      11687     48806446       1024    5
TEST2                 500     FA    1592197     10000000     777728 1382
TESTFILE              500     FA          0     10000000    1272320 2458

  :LISTF DOCMNTS,-2
  FILENAME    ACD ENTRIES
  DOCMNTS       NO ACDS

  :LISTF DOCMNTS,-3
  ********************
  FILE DOCMNTS.DEVELOP.HPXLII
  
  FCODE     : 0           FOPTIONS: STD,ASCII,FIXED,NOCCTL
  BLK FACTOR: 16          CREATOR : PETE
  REC SIZE  : 80(BYTES)   LOCKWORD: RETEP
  BLK SIZE  : 640(BYTES)  SECURITY--READ   : ANY
  EXT SIZE  : 25(SECT)              WRITE  : ANY
  NUM REC: 501                      APPEND : ANY
  NUM SEC: 165                      LOCK   : ANY
  NUM EXT: 7                        EXECUTE: ANY
  MAX REC: 501                    **SECURITY IS ON
  MAX EXT: 7              FLAGS   : n/a
  NUM LABELS: 0           CREATED : FRI, 21 SEP 1986, 1155 AM
  MAX LABELS: 0           MODIFIED: FRI, 21 SEP 1986, 1234 PM
  DISC DEV #: 3           ACCESSED: FRI, 21 SEP 1986, 12:46 PM
  SEC OFFSET: 0
  CLASS     : DISC        LABEL ADDR: $00000010 $0010E014

  :LISTF DOCMNTS,4
  ********************
  FILE DOCMNTS.DEVELOP.HPXLII
  ACCOUNT ------  READ : ANY
                 WRITE : AC
                APPEND : AC
                  LOCK : ANY
               EXECUTE : ANY
  GRUOP --------  READ : GU
                 WRITE : GU
                APPEND : GU
                  LOCK : GU
               EXECUTE : GU
                  SAVE : GU
  FILE ---------  READ : ANY                FCODE: 0
                 WRITE : ANY              **SECURITY IS ON
                APPEND : ANY                NO ACDS
                  LOCK : ANY    
               EXECUTE : ANY
  
  FOR PETE.HPXLII: READ, WRITE, EXECUTE, APPEND, LOCK

  :LISTF LINKCLK,-1
  
 F = LINKCLK
 00000000 44495343 20202020 20202020 20202020 20202020 ....DISC
 20202020 20202020 20202020 20310000 4C494E4B 434C4B20              1.
 20202020 20202020 44455645 4C4F5020 20202020 20202020         DEVELOP
 00000000 50455445 20202020 20202020 20202020 00000000 ....PETE       
 20202020 20202020 20202020 20202020 4D475220 20202020                
 4850584C 49492020 00000000 FC000000 04660001 10537F19 HPXLII  .......
 00010401 00000000 00000300 00056EE7 2F538AED 00056EE7 ..............n
 2F538AED 00056EE7 2F53D1CC 00056EE7 2F538AED 00000000 /S....n./S....n
 00000000 000003FF 00000000 00000000 00000000 00000000 ...............
 0003FF00 00000000 00000000 00000000 00000100 00000100 ...............
 00010000 00000000 00000000 00000000                   ...............

Additional Information

Commands

LISTFILE, VERSION, CHDIR, LISTDIR (UDC), FINDFILE (UDC)

Manuals

Performing System Management Tasks
Performing System Operation Tasks