HP-PB 100VG-AnyLAN Network Adapter Installation and Service: HP 3000 MPE/iX Computer Systems

Index

»

Technical documentation


	Complete book in PDF


»	Feedback

» Table of Contents

» Glossary

» Index

Symbols

100VG-AnyLAN hub, 4. Attach the Adapter to the Network
10Base-T hub/switch, 4. Attach the Adapter to the Network

A

adapter configurations and limitations, a. Access the adapter slot(s)
adapter part numbers, Exchange Assembly
adapter slot connector, c. Insert the adapter into the slot
antistatic precautions, 1. Prepare to Install the Adapter, Removal/Replacement Instructions, Removal/Replacement of the Adapter
attach adapter to network, 4. Attach the Adapter to the Network

B

backplane, Product Description
before installing, 1. Prepare to Install the Adapter, 2. Shut Down the Operating System and Switch Off the Computer
before removing, Removal/Replacement of the Adapter

C

category 3 or 5 cable, 4. Attach the Adapter to the Network
configurations and limitations, a. Access the adapter slot(s)
configure adapter to system, 5. Configure the Adapter into the System

D

daughter card model and revision number, Record Adapter Information
declaration of conformity, Declaration of Conformity

E

exchange assembly, Exchange Assembly
extractor levers, c. Insert the adapter into the slot

F

faulty adapters, Troubleshooting Tools

Field Replaceable Units, Service Information, Field Replaceable Units

FRU

Field Replaceable Units, Service Information

FRUs, Field Replaceable Units

G

grounding wrist strap, Tools and Accessories, Observe Antistatic Precautions, Gather Tools and Accessories, Removal/Replacement Instructions

H

HP-PB 100VG-AnyLAN Network Adapter, Product Description
HP-PB backplane, Product Description
hub/switch, 4. Attach the Adapter to the Network, 5. Configure the Adapter into the System, 6. Verify Operation, Troubleshooting Checklist

I

inserting and securing adapter, b. Select an available slot
install the adapter, HP-PB 100VG-AnyLAN Network Adapter Installation at a Glance, Installation Overview, Installation Procedure, 1. Prepare to Install the Adapter, 3. Install the Adapter

L

LAN

HP-PB 100VG-AnyLAN Network Adapter Local Area Network, Product Description

LED patterns, 6. Verify Operation

LEDs, 4. Attach the Adapter to the Network, 6. Verify Operation, Card LEDs, Troubleshooting Checklist

M

MAC address, Record Adapter Information, Troubleshooting Checklist
motherboard model and revision number, Record Adapter Information
MPE systems, 5. Configure the Adapter into the System

N

network

connecton to, 4. Attach the Adapter to the Network

P

part numbers, Verify Product Contents, Exchange Assembly
port connection, 4. Attach the Adapter to the Network
product contents, Product Contents, Verify Product Contents
product description, Product Description
product numbers, Verify Product Contents, Exchange Assembly

R

removal/replacement of adapter, Removal/Replacement of the Adapter
reshipment guidelines, Service Information, Reshipment Guidelines
retaining screws, c. Insert the adapter into the slot
RFI suppression, Removal/Replacement of the Adapter
RJ-45 connector, Product Description, 4. Attach the Adapter to the Network

S

select adapter slot, 3. Install the Adapter, a. Access the adapter slot(s)
serial number, Record Adapter Information
service information, Service Information
shutdown procedures, 2. Shut Down the Operating System and Switch Off the Computer, Removal/Replacement of the Adapter
station address, Record Adapter Information
storage of adapters, Removal/Replacement Instructions, Technical Specifications
switch/hub, 4. Attach the Adapter to the Network, 5. Configure the Adapter into the System, 6. Verify Operation, Troubleshooting Checklist

T

technical specifications, Service Information, Technical Specifications
tools and accessories, Tools and Accessories, Gather Tools and Accessories
troubleshooting, Service Information, Troubleshooting Tools, Troubleshooting Checklist

V

verify operation, 6. Verify Operation


Feedback to webmaster