In addition to English, there are four localized versions
of HP Easytime/XL; French, Spanish, German and Japanese.
If installing one of the localized versions, the system manager
must configure the appropriate language on your system using the
LANGINST utility program. Refer to Localizing/Customizing
System Information for the LANGINST dialog.
Refer to Table 1-1 “Language Settings”, it indicates the commands
to be typed to start a localized version of HP Easytime/XL. Please
note that this setting is valid for the current session only. If
the system administrator has specified the language of the localized
version as the system default language, this procedure does not
need to be performed.
Table 1-1 Language Settings
For This Language | Type This |
---|
French | SETJCW NLUSERLANG=7 Return |
Spanish | SETJCW NLUSERLANG=12 Return |
German | SETJCW NLUSERLANG=8 Return |
Japanese | SETJCW NLUSERLANG=221 Return SETVAR TERM "HPTERM-ASIAN" Return |
For example, to set the session to French:
Type
:SETJCW NLUSERLANG=7 Return
Type :RUN EASYTIME.PUB.SYS Return
A message appears in French prompting you to enable HP Easytime/XL.
If this message is displayed in English, the system administrator
has not configured French for your system.
Press F5 OK to enable HP Easytime/XL.
Customizing HP Easytime/XL |
 |
The system manager can use the setup program to customize
the HP Easytime/XL program. See “Customizing HP Easytime/XL” in
this manual. This program is optional. HP Easytime/XL arrives set
up, it can be used as is, or customize it to meet your particular
needs.
Enabling HP Easytime/XL |
 |
Before using HP Easytime/XL, the program must be enabled.
This is a system administrator responsibility. If you are not the
system administrator, ask the system administrator to do this for
you.
Log on to the system as MANAGER.SYS.
From the system prompt, type:
:RUN EASYTIME.PUB.SYS Return
Press F5 OK to enable HP Easytime/XL.
Start HP Easytime/XL and begin performing tasks.
Disabling HP Easytime/XL |
 |
Log on to the system as MANAGER.SYS.
Start HP Easytime/XL.
Switch to system administrator mode.
From the Main menu, press
D for Disable HP Easytime/XL.
A dialog box prompts you for confirmation.
Press F5 OK to confirm disabling HP Easytime/XL.
Press F5 Yes to confirm again.