|
|
Information required for network configuration on the host is contained in one
file. The name of this configuration file is NMCONFIG.PUB.SYS.
When building a new configuration file, it is not necessary to define every
field. This is because a sample configuration file is supplied with the MPE/iX
operating system. The sample configuration file is called
NMSAMP1.PUB.SYS. Hewlett-Packard recommends using the sample file as
a template for initial configuration.
 |
CAUTION: Use the sample configuration file for first time
configurations only. Information previously configured using NMMGR, and
stored in NMCONFIG.PUB.SYS, will be overwritten when the sample
file is copied to NMCONFIG.PUB.SYS.
|
The NMCONFIG.PUB.SYS file can be modified using NMMGR. Only one
configuration file can be active at a time and the active file must be called
NMCONFIG.PUB.SYS. Accordingly, modified or new configuration files
must be copies to NMCONFIG.PUB.SYS before they can be used by the
system.
 |
CAUTION: If ANY other configuration file is copied to
NMCONFIG.PUB.SYS or NMCONFIX.PUB.SYS then dynamic
configuration will be disabled until a DTS shutdown and restart is done or
the system is rebooted. This includes other files from the same system or
files copied from other systems.
|
|