The General X.25 screen (#159) in Figure 7-5 “General X.25 Protocol Screen” is displayed when you press the [Go To X25]
function key at the Protocol Configuration screen (Figure 7-4 “Protocol Configuration Screen”). It is also displayed when you type the
path name:
@NETXPORT.NI.NIname.PROTOCOL.X25
in the Command window of any screen and press the [Enter]
key, where NIname is a configured X.25 NI.
Figure 7-5 General X.25 Protocol Screen
Use the fields and the function keys of the select screen
to perform the desired action. Press the [Save Data]
function key to transfer the data displayed on the screen to the
configuration file you are creating or updating. Verify that the
data record has been created by checking that the Data flag is set
to Y.
Fields
- Inactivity timer for IP connections (in seconds)
(Required.) Enter a number
of seconds after which any inactive switched virtual circuits (SVC)
being used for TCP/IP connections are automatically disconnected.
If no inactivity timer is to be set, enter a 0 in this field.
It is best to set this timer at more than two times the value
of the TCP connection assurance timer. This keeps the X.25 virtual
circuit for a remote session active, even when no user data is being
transferred.
Default value: 1210
Range: 0, 30-32767
Related screen:
NETXPORT.GPROT.TCP
The TCP connection assurance timer is set in this screen.