 |
» |
|
|
|
A- AAUTO
- SYSFILE configurator command, To add objects to the SLT, To add autoboot files
- ABOOT
- SYSFILE configurator command, To add objects to the SLT, To add boot files
- absolute pathname, Managing Directories
- AC power failure, System behavior when AC power fails
- access control definitions (ACDs), Controlling File Access with ACDs
- access modes, Access modes
- access port, To enable the access port (AP)
- access port commands, To use the access port
- accessing files, To manage master and member volumes
- accessing files, directories, To control access to directories
- Accessing other configurators
- SYSGEN utility, To access other configurators
- accessing VOLUTIL, To access VOLUTIL
- accounts
- creating, To create accounts
- spanning, To manage master and member volumes
- ACDs, Controlling File Access with ACDs
- access modes, Controlling File Access with ACDs, Access modes
- ACLASS
- I/O Configurator command, Adding Objects in SYSGEN
- ACLASS command, To add a class name
- ACMSL
- SYSFILE Configurator command, To add objects to the SLT
- SYSFILE configurator command, To add a segment to the CMSL
- activating the configurators
- SYSGEN utility, To access other configurators
- adding a boot image to the SLT, To add objects to the SLT
- Adding a class name, To add a class name
- adding a segment to a temporary copy of the CMSL , To add objects to the SLT
- adding a volume, To add volumes
- EXPANDCLASS, To add additional volumes to an existing volume class
- adding an autoboot FILE to the SLT, To add objects to the SLT
- adding an HP-IB disk drive, Adding an HP-IB Disk Drive
- adding classes in SYSGEN, Adding Objects in SYSGEN
- adding devices, To add devices
- adding devices in SYSGEN , Adding Objects in SYSGEN
- adding file names to DUMP to TAPE, To add file names to save to tape
- adding I/O paths, To add paths
- adding I/O paths in SYSGEN , Adding Objects in SYSGEN
- adding objects to the SLT, To add objects to the SLT
- adding the volume set
- NEWVOL, To add members to the volume set
- second volume, To add members to the volume set
- adding UPS devices, To configure a UPS
- adding users, To create users
- ADDTHRESHOLD
- commands, Configuring a Threshold, To add a threshold
- ADEV
- I/O Configurator command, Adding Objects in SYSGEN, To add devices, Adding an HP-IB Disk Drive
- ALTACCT
- changing file space limits, To change file space limits
- ALTERVOL
- changing the disk storage, To change the disk storage
- ALTGROUP
- changing file space limits, To change file space limits
- AM capability, Capabilities
- APATH
- I/O Configurator command, Adding Objects in SYSGEN, To add paths, Adding an HP-IB Disk Drive
- ASPROG
- SYSFILE configurator command, To add objects to the SLT, To add file names to save to tape
- autoboot images
- deleting, To delete autoboot images
- replacing, To replace autoboot images
- Autorestart, HFS Directories and High-Availability Products
- available disk space, Determining Free Disk Space
- AVOL
- I/O Configurator command, Adding Objects in SYSGEN, To add volumes
B- backing up the system<\IDX>, Planning Your Backup Strategy
- backup schedule
- cumulative, When to use cumulative backups
- daily full backup, When to do full backups
- incremental, When to use incremental backups
- BASEGROUP
- SYSGEN command, Adding an HP-IB Disk Drive
- BBU, Series 925 through Series 949, To understand the battery backup unit
- boot images
- deleting, To delete boot images
- replacing, To replace boot images
- boot tape, To create system load tapes
- booting the system, Managing Types of Volume Sets
- BUILD
- establishing a file in a volume set, To add a file to a volume set
- BUILD command, To manage master and member volumes
- DEV=, To manage master and member volumes
- Bus, Determining Hardware Paths
- Bus converter number, To recognize hardware path components
C- capabilities
- special, Managing Disks
- case sensitivity, To create directories
- CD access, To control access to directories, Directory permissions
- changing file space limits
- ALTACCT, To change file space limits
- ALTGROUP, To change file space limits
- changing the disk storage
- ALTERVOL, To change the disk storage
- changing the I/O configuration online, Using the IOCONFIG Utility
- channel adapter module number, To recognize hardware path components
- CHDIR command, To move between directories
- checking volume states
- DSTAT ALL, To display information about all mounted volumes
- checking volume status
- DSTAT ALL, To check all volumes
- CIO device adapter slot number, To recognize hardware path components
- class, To manage master and member volumes
- default, To manage master and member volumes
- class name, To manage master and member volumes
- classes
- adding in SYSGEN , Adding Objects in SYSGEN
- listing, To list device classes
- modifying, To modify classes
- CLEAR
- IO configurator command, To clear configuration changes
- clearing configuration changes, To hold and save configuration changes, To clear configuration changes
- CMSL, To add objects to the SLT
- adding a segment to, To add a segment to the CMSL
- replacing a segment of, To replace a CMSL segment
- see compatibility mode segment library, To add objects to the SLT
- SYSFILE configurator command, To use a segmented library file as CMSL
- CMSL contents
- listing, To list CMSL contents
- commands
- ADDTHRESHOLD, Configuring a Threshold, To add a threshold
- CHDIR, To move between directories
- DELETETHRESHOLD, To disable monitoring of a resource, Configuring a Threshold, To delete a threshold
- DISABLEMANAGER, To disable Threshold Manager, To disable monitoring of a resource
- DISABLENOTIFY, To control global notifications
- DISABLERESOURCE, To disable monitoring of a resource
- DISKUSE, To list the space used by directories, To display disk usage information
- DISPLAY, To display the configuration
- DO, To reissue a command using DO, To reissue a command using REDO, To review the command line history stack
- ENABLEMANAGER, To enable Threshold Manager
- ENABLENOTIFY, To control global notifications
- ENABLERESOURCE, To enable monitoring of a resource
- EXIT, To exit Threshold Manager
- HELP, To use online help
- LISTFILE, To list directories
- LISTREDO, To reissue a command using DO, To reissue a command using REDO, To review the command line history stack
- MODIFYINTERVAL, To modify the time interval of the operation cycle
- MODIFYTHRESHOLD, Configuring a Threshold, To modify a threshold
- NEWACCT, To create accounts
- NEWDIR, To create directories
- NEWGROUP, To create MPE groups
- NEWUSER, To create users
- PURGEDIR, To delete directories
- REDO, To reissue a command using DO, To reissue a command using REDO, To review the command line history stack
- REPORT, To list the space used by directories
- RESET, To reset the configuration
- shell, MPE/iX Shell and Utilities
- SHOW, To display the configuration, To print the configuration display, To reset the configuration, To modify a threshold
- USE, To execute a file from Threshold Manager
- commands - I/O Configurator
- ACLASS, Adding Objects in SYSGEN
- ADEV, Adding Objects in SYSGEN, To add devices, Adding an HP-IB Disk Drive
- APATH, Adding Objects in SYSGEN, To add paths, Adding an HP-IB Disk Drive
- AVOL, Adding Objects in SYSGEN, To add volumes
- DCLASS, Deleting Objects in SYSGEN
- DDEV, Deleting Objects in SYSGEN, To delete devices
- DPATH, Deleting Objects in SYSGEN, To delete paths
- DVOL, Deleting Objects in SYSGEN, To delete volumes
- EXIT, Adding an HP-IB Disk Drive
- help, Using SYSGEN's I/O Configurator
- HOLD, Adding an HP-IB Disk Drive
- LCLASS, Using SYSGEN's I/O Configurator, Adding an HP-IB Disk Drive
- LDEV, Using SYSGEN's I/O Configurator, To list devices, Adding an HP-IB Disk Drive
- LPATH, Using SYSGEN's I/O Configurator, To list paths, Adding an HP-IB Disk Drive
- LVOL, Using SYSGEN's I/O Configurator, To list volumes
- MADDRESS, Changing Configurations in SYSGEN
- MCLASS, Changing Configurations in SYSGEN, To modify classes
- MDEV, Changing Configurations in SYSGEN, To modify devices
- MPATH, Changing Configurations in SYSGEN, To modify I/O paths
- MVOL, Changing Configurations in SYSGEN, To modify volumes
- OCLOSE, Adding an HP-IB Disk Drive
- Commands - ISL
- IOMAP, To list system hardware, To recover corrupted disk files
- commands - LOG configurator
- help, To display on-line help
- OCLOSE, To show current LOG values
- SHOW, To show current LOG values
- SLOG, To log system events
- ULOG, To control user logging
- commands - MISC configurator
- DRIN, To delete RINs
- help, To use online help
- JOB, To configure job-related limits
- LRIN, To display resource identification numbers (RINs)
- OCLOSE, To display resource identification numbers (RINs)
- RESOURCE, To set resource allocations
- SESSION, To set session-related limits
- SHOW, To show current values
- STACK, To set sizes of NM and CM stacks
- SYSTEM, To set strings and string parameters
- commands - SYSFILE configurator
- AAUTO, To add objects to the SLT, To add autoboot files
- ABOOT, To add objects to the SLT, To add boot files
- ACMSL, To add objects to the SLT, To add a segment to the CMSL
- ASPROG, To add objects to the SLT, To add file names to save to tape
- CMSL, To use a segmented library file as CMSL
- DAUTO, To delete objects from the SLT, To delete autoboot images
- DBOOT, To delete objects from the SLT, To delete boot images
- DCMSL, To delete objects from the SLT, To delete compatibility mode segments
- DSPROG, To delete objects from the SLT, To delete system programs
- help, To use online help
- LCMSL, To list CMSL contents
- RAUTO, To replace objects on the SLT
- RBOOT, To replace objects on the SLT, To replace boot images
- RCAT, To replace objects on the SLT, To configure a message catalog
- RCMSL, To replace objects on the SLT, To replace a CMSL segment
- RDCC, To replace objects on the SLT, To replace or define a network configuration file
- RIPL, To replace objects on the SLT, To replace an IPL image
- RNMLIB, To replace objects on the SLT, To replace the native mode library
- RSPROG, To replace objects on the SLT, To replace a system program
- SHOW, To display current file information
- commands - SYSGEN
- BASEGROUP, Adding an HP-IB Disk Drive
- HELP, To use online help
- IO, Adding an HP-IB Disk Drive
- KEEP, Adding an HP-IB Disk Drive
- LOG, To enter the LOG configurator
- MISC, To access the MISC configurator
- PERMYES, To confirm potentially serious actions
- SYSFILE, To access the SYSFILE configurator
- TAPE, To create system load tapes
- comparing the 900 Series HP 3000 family, Identifying the System
- compatibility mode segment library, To add objects to the SLT
- see CMSL, To add objects to the SLT
- components of Series 925 through Series 949 systems, Components of the Series 925 Through Series 949 Systems
- Concept
- Threshold, Configuring a Threshold
- configuration
- system, Managing Types of Volume Sets
- configuration changes
- clearing, To clear configuration changes
- configuration file
- IODEFAULT.PUB.SYS, To identify local devices to the system
- Configurator commands
- SYSGEN utility, To access other configurators
- configuring a message catalog, To configure a message catalog
- configuring a UPS device, To configure a UPS
- configuring a UPS on a DTC, To configure a UPS connected via a DTC port
- configuring default device attributes, To configure default device attributes
- configuring job related limits, To configure job-related limits
- configuring the first UPS on a Series 9X8, To configure the first UPS on a Series 9X8
- confirming potentially serious actions
- SYSGEN utility , To confirm potentially serious actions
- Controlling disk usage, Controlling Disk Usage
- create directory entries, To control access to directories
- create volumes (CV) capability, To access VOLUTIL
- creating
- directories, To create directories
- creating a system load Tape, To create system load tapes
- creating a volume set
- nonsystem, Creating a Nonsystem Volume Set
- creating device link files, To create device link files
- creating groups, To create MPE groups
- cross-validation
- NMCONFIG.PUB.SYS with SYSGEN, Cross-Validating NMCONFIG. PUB.SYS with SYSGEN
- CTRL A, To enable the access port (AP)
- CTRL B, To save main memory to tape, To enable the access port (AP)
- current working directory, Managing Directories
D- data availability, Managing Disks
- data partitioning, Managing Disks
- databases
- HPGID, The Group and User Databases
- HPUID, The Group and User Databases
- maintaining group and user, The Group and User Databases
- DAUTO
- SYSFILE configurator command, To delete objects from the SLT, To delete autoboot images
- DBOOT
- SYSFILE configurator command, To delete objects from the SLT, To delete boot images
- DCLASS
- I/O Configurator command, Deleting Objects in SYSGEN
- DCMSL
- SYSFILE configurator command, To delete objects from the SLT, To delete compatibility mode segments
- DD access, To control access to directories, To delete directories, Directory permissions
- DDEV
- I/O Configurator command, Deleting Objects in SYSGEN, To delete devices
- default class
- DISC, To manage master and member volumes
- defining a network configuration file, To replace or define a network configuration file
- Defining system console connections , To identify system console connections
- defining the volume set
- LDEV, To define the volume set
- master volume name, To define the volume set
- NEWSET, To define the volume set
- set name, To define the volume set
- defining volume classes
- NEWCLASS, To create volume classes
- delete
- directory entries, To control access to directories
- using wildcards, To delete directories using wildcards
- DELETETHRESHOLD
- commands, To disable monitoring of a resource, Configuring a Threshold, To delete a threshold
- deleting
- directories, To delete directories
- deleting autoboot images, To delete autoboot images
- deleting boot images, To delete boot images
- deleting classes in SYSGEN , Deleting Objects in SYSGEN
- deleting compatibility mode segments, To delete compatibility mode segments
- deleting devices, To delete devices
- deleting devices in SYSGEN , Deleting Objects in SYSGEN
- deleting I/O paths, To delete paths
- deleting I/O paths in SYSGEN , Deleting Objects in SYSGEN
- deleting objects from the SLT, To delete objects from the SLT
- deleting RINS, To delete RINs
- deleting system programs from a SLT, To delete system programs
- deleting volumes, To delete volumes
- Determining hardware path, Determining Hardware Paths
- DEVCTRL utility, To configure tape drives for ejection and data compression
- device class name
- UPS, To configure the first UPS on a Series 9X8
- device link files
- creating, To create device link files
- devices
- adding, To add devices
- deleting, To delete devices
- listing, To list devices
- modifying, To modify devices
- directory, Managing Directories
- access to, To control access to directories
- ACDs, To control access to directories
- creating, To create directories
- current working, Managing Directories
- deleting, To delete directories
- ENTRY, Managing Directories
- listing, To list directories
- moving to another, To move between directories
- names, Expanded File Naming Syntax
- parent, Managing Directories
- permissions, To control access to directories, Directory permissions
- root, Managing Directories
- space used by, To list the space used by directories, To display disk usage information
- DIRECTORY option, To list the space used by directories, To display disk usage information
- DISABLEMANAGER
- commands, To disable Threshold Manager, To disable monitoring of a resource
- DISABLENOTIFY
- commands, To control global notifications
- DISABLERESOURCE
- commands, To disable monitoring of a resource
- DISC class
- compatibility, To manage master and member volumes
- DISCFREE utility, Determining Free Disk Space
- DISCUTIL
- CONFIGURE, To recover corrupted disk files
- DISMOUNT, To recover corrupted disk files
- DSTAT, To recover corrupted disk files
- EXIT, To recover corrupted disk files
- HELP, To recover corrupted disk files
- MOUNT, To recover corrupted disk files
- PDEV, To recover corrupted disk files
- SAVE, To recover corrupted disk files
- SHOWDEV, To recover corrupted disk files
- TAPE, To recover corrupted disk files
- UNCONFIG, To recover corrupted disk files
- discutil, To recover corrupted disk files
- disk drive
- adding to system configuration, Adding an HP-IB Disk Drive
- disk failure, Managing Disks
- disk management
- benefits, Managing Disks
- Disk usage, controlling, Controlling Disk Usage
- disks, HFS Directories and High-Availability Products
- DISKUSE command, To list the space used by directories, To display disk usage information
- DISPLAY
- commands, To display the configuration
- global configuration display, To enable Threshold Manager
- displaying current file information, To display current file information
- displaying disk volume capacity, Determining Free Disk Space
- displaying free disk space, Determining Free Disk Space
- displaying local RINs, To display resource identification numbers (RINs)
- displaying mounted volume information
- DSTAT ALL, To check all volumes
- displaying volume set information
- SHOWSET, To display information about volume sets
- displaying volumes
- DSTAT, To display information about all mounted volumes
- distributed terminal controller (DTC), To enable the access port (AP)
- Distributed Terminal Controller (DTC) connections, To identify the distributed terminal controller (DTC) connections
- Distributed Terminal Controllers (DTCs) supported, To identify the distributed terminal controller (DTC) connections
- DO
- commands, To reissue a command using DO, To reissue a command using REDO, To review the command line history stack
- downtime
- reducing, Managing Disks
- DPATH
- I/O Configurator command, Deleting Objects in SYSGEN, To delete paths
- DRIN
- MISC configurator command, To delete RINs
- DSPROG
- SYSFILE configurator command, To delete objects from the SLT, To delete system programs
- DSTAT
- displaying volumes, To display information about all mounted volumes
- DTC, To enable the access port (AP)
- DTS link
- NMMGR, Getting Started Defining Your System
- DUMP Utility, To save main memory to tape
- duplicate volume, To check nonsystem volumes
- DVOL
- I/O Configurator command, Deleting Objects in SYSGEN, To delete volumes
E- ENABLEMANAGER
- commands, To enable Threshold Manager
- ENABLENOTIFY
- commands, To control global notifications
- ENABLERESOURCE
- commands, To enable monitoring of a resource
- enhancements, POSIX on MPE/iX
- entering an MPE command from the IO configurator, To enter an MPE command from any configurator
- entering the LOG configurator, To enter the LOG configurator
- entering the MISC configurator, To access the MISC configurator
- entering the SYSFILE configurator, To access the SYSFILE configurator
- ENTRY, directory, Managing Directories
- establishing a file in a volume set
- BUILD, To add a file to a volume set
- EXIT
- commands, To exit Threshold Manager
- I/O Configurator command, Adding an HP-IB Disk Drive
- Exiting IOMAP, To list system hardware
- EXPANDCLASS
- adding a volume, To add additional volumes to an existing volume class
- extents
- file, To manage master and member volumes
F- failure
- disk, Managing Disks
- system, Managing Disks
- file
- creator, Setting Up Accounts, Groups, and Users, File Ownership
- listing, To list files in directories
- name conventions, Expanded File Naming Syntax
- owner, File Ownership
- spanning, To manage master and member volumes
- FILE command, To manage master and member volumes
- DEV=, To manage master and member volumes
- file extents, To manage master and member volumes
- file information
- displaying, To display current file information
- file permissions, File permissions
- file system, Managing Directories
- files
- accessing, To manage master and member volumes
- fragmentation of disk volumes, Determining Free Disk Space
- free disk space, Determining Free Disk Space
- functions
- Threshold Manager commands, Using Threshold Manager Commands
G- GID, Setting Up Accounts, Groups, and Users, The Group and User Databases
- global configuration display
- DISPLAY, To enable Threshold Manager
- gmt, Using Initial System Loader (ISL) Commands
- group
- MPE/iX, Setting Up Accounts, Groups, and Users
- group ID (GID), Setting Up Accounts, Groups, and Users, The Group and User Databases
- group ID database, The Group and User Databases
- groups, To manage master and member volumes
- creating, To create MPE groups
H- hardware
- configuring, Creating a Nonsystem Volume Set
- hardware clock, To set or change the system clock
- Hardware path
- determining, Determining Hardware Paths
- hardware path component, To recognize hardware path components
- HELP
- commands, To use online help
- LOG configurator, To display on-line help
- VOLUTIL, To use online help
- help
- I/O Configurator, Using SYSGEN's I/O Configurator
- SYSGEN, To use online help
- help facility
- MISC configurator, To use online help
- SYSFILE configurator, To use online help
- HFS, The Hierarchical File System (HFS)
- HFS syntax, Expanded File Naming Syntax
- hierarchical file system, The Hierarchical File System (HFS), Managing Directories
- HOLD
- I/O Configurator command, Adding an HP-IB Disk Drive
- holding configuration changes, To hold and save configuration changes
- HP-IB/HP-FL (port) address, To recognize hardware path components
- HP-PA family, Identifying the System
I- I/O configuration changes
- online, Using the IOCONFIG Utility
- I/O Configurator
- help, Using SYSGEN's I/O Configurator
- I/O configurator, Using SYSGEN's I/O Configurator
- I/O Configurator commands
- ACLASS, Adding Objects in SYSGEN
- ADEV, Adding Objects in SYSGEN, To add devices, Adding an HP-IB Disk Drive
- APATH, Adding Objects in SYSGEN, To add paths, Adding an HP-IB Disk Drive
- AVOL, Adding Objects in SYSGEN, To add volumes
- DCLASS, Deleting Objects in SYSGEN
- DDEV, Deleting Objects in SYSGEN, To delete devices
- DPATH, Deleting Objects in SYSGEN, To delete paths
- DVOL, Deleting Objects in SYSGEN, To delete volumes
- EXIT, Adding an HP-IB Disk Drive
- help, Using SYSGEN's I/O Configurator
- HOLD, Adding an HP-IB Disk Drive
- LCLASS, Using SYSGEN's I/O Configurator, Adding an HP-IB Disk Drive
- LDEV, Using SYSGEN's I/O Configurator, To list devices, Adding an HP-IB Disk Drive
- LPATH, Using SYSGEN's I/O Configurator, To list paths, Adding an HP-IB Disk Drive
- LVOL, Using SYSGEN's I/O Configurator, To list volumes
- MADDRESS, Changing Configurations in SYSGEN
- MCLASS, Changing Configurations in SYSGEN, To modify classes
- MDEV, Changing Configurations in SYSGEN, To modify devices
- MPATH, Changing Configurations in SYSGEN, To modify I/O paths
- MVOL, Changing Configurations in SYSGEN, To modify volumes
- OCLOSE, Adding an HP-IB Disk Drive
- I/O devices
- configuring with SYSGEN, Configuring Devices with SYSGEN
- I/O path, To identify local devices to the system
- I/O paths
- adding, To add paths
- defined, To list paths
- deleting, To delete paths
- listing, To list paths
- modifying, To modify I/O paths
- identifying local devices, To identify local devices to the system
- identifying network connections, To identify network connections
- IN USE, To delete directories
- initial system loader, Using Initial System Loader (ISL) Commands
- initializing a volume
- INITVOL, To add members to the volume set
- INITVOL
- initializing a volume, To add members to the volume set
- IO
- SYSGEN command, Adding an HP-IB Disk Drive
- IO configurator
- entering an MPE command from, To enter an MPE command from any configurator
- IO configurator commands
- CLEAR, To clear configuration changes
- IOCONFIG Utility, Using the IOCONFIG Utility
- IODEFAULT.PUB.SYS, To identify local devices to the system
- IOMAP
- exiting, To list system hardware
- ISL command, To list system hardware, To recover corrupted disk files
- iomap, To list system hardware
- IOMAP Utility
- activating, To list system hardware
- IPL file
- replacing, To replace an IPL image
- ISL, Using Initial System Loader (ISL) Commands
- ALTPATH, Using Initial System Loader (ISL) Commands
- autoboot, Using Initial System Loader (ISL) Commands
- autosearch, Using Initial System Loader (ISL) Commands
- CLKUTIL, To set or change the system clock
- clkutil, Using Initial System Loader (ISL) Commands
- CONSPATH, Using Initial System Loader (ISL) Commands
- discutil, Using Initial System Loader (ISL) Commands
- DISPLAY, Using Initial System Loader (ISL) Commands
- help, Using Initial System Loader (ISL) Commands
- IOMAP, Using Initial System Loader (ISL) Commands
- LISTF, Using Initial System Loader (ISL) Commands
- LS, Using Initial System Loader (ISL) Commands
- PRIMPATH, Using Initial System Loader (ISL) Commands
- ISL Commands
- IOMAP, To list system hardware, To recover corrupted disk files
- ISL utilities, Using Initial System Loader (ISL) Commands
L- LANIC connections, To identify the distributed terminal controller (DTC) connections
- LCLASS
- I/O Configurator command, Using SYSGEN's I/O Configurator, Adding an HP-IB Disk Drive
- LCMSL
- SYSFILE configurator command, To list CMSL contents
- LDEV
- I/O Configurator command, Using SYSGEN's I/O Configurator, To list devices, Adding an HP-IB Disk Drive
- logical device number, To identify local devices to the system
- LDEV number, To list devices
- see logical device number, To list devices
- LDEV1, To manage master and member volumes
- LIMIT command, To prevent new system activity
- limits
- configuring job related, To configure job-related limits
- setting session related, To set session-related limits
- LISTDIR UDC, To list directories
- LISTFILE command, To list directories
- listgroup command, To manage master and member volumes
- listing classes, To list device classes
- listing CMSL contents, To list CMSL contents
- listing devices, To list devices
- listing files, To list files in directories
- listing paths, To list paths
- listing RINS, To display resource identification numbers (RINs)
- listing volumes, To list volumes
- LISTREDO
- commands, To reissue a command using DO, To reissue a command using REDO, To review the command line history stack
- LISTSPF command, To clear the backlog of reports
- local console capabilities, To recognize local/remote console capabilities
- lockwords, Lockwords
- LOG
- SYSGEN command, To enter the LOG configurator
- LOG configurator, Defining Events to Be Recorded
- help, To display on-line help
- LOG configurator commands
- help, To display on-line help
- OCLOSE, To show current LOG values
- SHOW, To show current LOG values
- SLOG, To log system events
- ULOG, To control user logging
- LOG values
- showing, To show current LOG values
- logging
- system, Defining Events to Be Recorded
- user, Defining Events to Be Recorded
- logging configurator, Defining Events to Be Recorded
- logging UPS activity, To enable logging of UPS activity
- logical devcie number
- LDEV, To identify local devices to the system
- logical device number
- see LDEV number, To list devices
- loner status, To check nonsystem volumes
- LPATH
- I/O Configurator command, Using SYSGEN's I/O Configurator, To list paths, Adding an HP-IB Disk Drive
- LRIN
- MISC configurator command, To display resource identification numbers (RINs)
- LVOL
- I/O Configurator command, Using SYSGEN's I/O Configurator, To list volumes
M- MADDRESS
- I/O Configurator command, Changing Configurations in SYSGEN
- maintaining group and user databases, The Group and User Databases
- master volume, Managing Types of Volume Sets
- contents, To manage master and member volumes
- requirements, Managing Types of Volume Sets
- MCLASS
- I/O Configurator command, Changing Configurations in SYSGEN, To modify classes
- MDEV
- I/O Configurator command, Changing Configurations in SYSGEN, To modify devices
- member volume
- contents, To manage master and member volumes
- message catalog
- configuring, To configure a message catalog
- mirrored disk, HFS Directories and High-Availability Products
- MISC
- SYSGEN command, To access the MISC configurator
- MISC configurator, Defining Miscellaneous System Resources
- help facility, To use online help
- see miscellaneous configurator, Defining Miscellaneous System Resources
- MISC configurator command
- DRIN, To delete RINs
- JOB, To configure job-related limits
- LRIN, To display resource identification numbers (RINs)
- RESOURCE, To set resource allocations
- SESSION, To set session-related limits
- STACK, To set sizes of NM and CM stacks
- SYSTEM, To set strings and string parameters
- MISC configurator commands
- help, To use online help
- OCLOSE, To display resource identification numbers (RINs)
- SHOW, To show current values
- miscellaneous (MISC) configurator, Defining Miscellaneous System Resources
- see MISC configurator , Defining Miscellaneous System Resources
- modifying addresses in SYSGEN , Changing Configurations in SYSGEN
- modifying classes, To modify classes
- modifying classes in SYSGEN , Changing Configurations in SYSGEN
- modifying devices, To modify devices
- modifying devices in SYSGEN , Changing Configurations in SYSGEN
- modifying I/O paths, To modify I/O paths
- modifying paths in SYSGEN , Changing Configurations in SYSGEN
- modifying volumes, To modify volumes
- MODIFYINTERVAL
- commands, To modify the time interval of the operation cycle
- MODIFYTHRESHOLD
- commands, Configuring a Threshold
- MODIFYTHRESOHLD
- commands, To modify a threshold
- monitoring a UPS device, To use UPS Monitor/iX software
- mountable volume
- security, Managing Disks
- mounted volume information, To check all volumes
- moving from one directory to another, To move between directories
- MPATH
- I/O Configurator command, Changing Configurations in SYSGEN, To modify I/O paths
- MPE/iX enhancements, POSIX on MPE/iX
- MPE/iX shell, MPE/iX Shell and Utilities
- MPEXL_SYSTEM_VOLUME_SET, Managing Types of Volume Sets, To manage master and member volumes
- MVOL
- I/O Configurator command, Changing Configurations in SYSGEN, To modify volumes
N- names
- directory, Expanded File Naming Syntax
- file, Expanded File Naming Syntax
- native mode library
- replacing, To replace the native mode library
- NETCONTROL command, To close any open communication lines
- network configuration file
- defining, To replace or define a network configuration file
- replacing, To replace or define a network configuration file
- NEWACCT command, To create accounts
- NEWCLASS
- defining volume classes, To create volume classes
- NEWDIR command, To create directories
- NEWGROUP command, To create MPE groups
- NEWUSER command, To create users
- NEWVOL
- adding the volume set, To add members to the volume set
- NMCONFIG.PUB.SYS
- cross-validation with SYSGEN, Cross-Validating NMCONFIG. PUB.SYS with SYSGEN
- NMMGR
- DTS link, Getting Started Defining Your System
- node management services configuration manager, Getting Started Defining Your System
- nonsystem volume, Managing Types of Volume Sets
- nonsystem volume set
- creating, Creating a Nonsystem Volume Set
- hardware, Creating a Nonsystem Volume Set
- planning, Creating a Nonsystem Volume Set
- nonsystem volume sets, Managing Types of Volume Sets
- NSCONTROL command, To close any open communication lines
P- parent directory, Managing Directories
- partitioning, To manage master and member volumes
- pathname, Expanded File Naming Syntax
- performing a system reset, Understanding System Resets
- peripheral maintenance
- scheduling, Understanding System Resets
- permanent storage, Managing Types of Volume Sets
- permissions
- directory, To control access to directories, Directory permissions
- file, File permissions
- PERMYES
- SYSGEN command, To confirm potentially serious actions
- placing volumes in scratch state
- SCRATCHVOL, To scratch a volume
- POSIX, POSIX on MPE/iX
- POSIX.1, POSIX on MPE/iX
- POSIX.2, POSIX on MPE/iX, MPE/iX Shell and Utilities
- power failure, System behavior when AC power fails
- powerfail protection, Series 9X8 and Series 99X, Introducing the UPS and UPS Monitor/iX Software
- powerfail recovery, System Behavior When AC Power Returns
- PURGEDIR command, To delete directories
R- RACD, To control access to directories, Permissions common to files and directories
- RAUTO
- SYSFILE configurator command, To replace objects on the SLT
- RBOOT
- SYSFILE configurator command, To replace objects on the SLT, To replace boot images
- RCAT
- SYSFILE configurator command, To replace objects on the SLT, To configure a message catalog
- RCMSL
- SYSFILE configurator command, To replace objects on the SLT, To replace a CMSL segment
- RD access, To control access to directories, Directory permissions
- RDCC
- SYSFILE configurator command, To replace objects on the SLT, To replace or define a network configuration file
- RECALL command, To answer any pending requests
- REDO
- commands, To reissue a command using DO, To reissue a command using REDO, To review the command line history stack
- REDO command, To reissue a command using REDO
- Release 4.5, Setting Up Accounts, Groups, and Users
- remote console capabilities, To recognize local/remote console capabilities
- replacing a CMSL segment, To replace a CMSL segment
- replacing a network configuration file, To replace or define a network configuration file
- replacing a system program, To replace a system program
- replacing an IPL image, To replace an IPL image
- replacing autoboot images, To replace autoboot images
- replacing boot images, To replace boot images
- replacing objects on the SLT, To replace objects on the SLT
- replacing the native mode library, To replace the native mode library
- REPLY command, To answer any pending requests
- REPORT command, To list the space used by directories
- RESET
- commands, To reset the configuration
- RESOURCE
- MISC configurator command, To set resource allocations
- resource allocations
- setting, To set resource allocations
- resources
- allocating, To set resource allocations
- efficient use, Managing Disks
- RIN
- deleting, To delete RINs
- listing, To display resource identification numbers (RINs)
- RIPL
- SYSFILE configurator command, To replace objects on the SLT, To replace an IPL image
- RISC architecture, Identifying the System
- RNMLIB
- SYSFILE configurator command, To replace objects on the SLT, To replace the native mode library
- root directory, Managing Directories
- RS, To save main memory to tape
- RSPROG
- SYSFILE configurator command, To replace objects on the SLT, To replace a system program
S- SCRATCH
- volume states, To scratch a volume
- SCRATCHVOL
- placing volumes in scratch state, To scratch a volume
- security
- access modes, Access modes
- ACDs, Controlling File Access with ACDs
- capabilities, Capabilities
- for MPE/iX, Controlling File Access with ACDs
- mountable volume, Managing Disks
- system, Managing Disks
- segmented library file
- using as CMSL, To use a segmented library file as CMSL
- sensitive data
- protecting, Managing Disks
- Series 925 through Series 949 and Series 958 system status panel, Components of the Series 925 Through Series 949 Systems
- Series 925 through Series 949 Battery Backup Unit, To understand the battery backup unit
- Series 925 through Series 949 BBU status conditions, To understand the battery backup unit
- Series 925 through Series 949 CIO Expander, To remove the SPU Card Cage
- Series 925 through Series 949 CIO Expander status lights, To understand the CIO expander
- Series 925 through Series 949 SPU card cage , Switches and Lights on Series 925 Through Series 949 Systems
- Series 950 through Series 980 basic components, To understand the battery backup unit
- Series 950 through Series 980 control panel information, Switches and lights on Series 950 through Series 980 systems
- Series 950 through Series 980 processor bay card cages, To understand processor bay card cages
- Series 991 and Series 995 Uninterruptible Power Supply, To understand the Uninterruptible Power Supply (UPS)
- Series 991 through 995 basic components, Components of Series 950 Through Series 980 Systems
- Series 9X8 UPS, To configure the first UPS on a Series 9X8
- SESSION
- MISC configurator command, To set session-related limits
- sessions
- setting related limits, To set session-related limits
- setting resource allocations, To set resource allocations
- setting session related limits, To set session-related limits
- setting sizes of native mode and compatibility mode stacks , To set sizes of NM and CM stacks
- setting strings and string parameters, To set strings and string parameters
- shell, MPE/iX Shell and Utilities
- shell commands, MPE/iX Shell and Utilities
- SHOW
- commands, To display the configuration, To print the configuration display, To reset the configuration, To modify a threshold
- LOG configurator command, To show current LOG values
- MISC configurator command, To show current values
- SYSFILE configurator command, To display current file information
- SYSGEN command, To show the state of the configurators
- SHOWDEV command, To clear the backlog of reports
- showing current file information, To display current file information
- showing current LOG values, To show current LOG values
- showing values of current configurable items, To show current values
- SHOWOUT command, To clear the backlog of reports
- SHOWSET
- displaying volume set information, To display information about volume sets
- SHUTDOWN command, To shut down the system
- SHUTQ command, To clear the backlog of reports
- slash (/), Managing Directories
- SLOG
- LOG configurator command, To log system events
- SLT, Getting Started Defining Your System, To create system load tapes
- deleting compatibility mode segments from , To delete compatibility mode segments
- deleting objects from, To delete objects from the SLT
- deleting system programs from, To delete system programs
- placing objects on, To replace objects on the SLT
- SM capability, Capabilities
- software clock, To set or change the system clock
- span, To manage master and member volumes
- special capabilities, Managing Disks
- special capability
- CV, To access VOLUTIL
- UV, To access VOLUTIL
- special characters, Expanded File Naming Syntax
- specifying standard device types, To configure default device attributes
- spool queues
- shutting, To clear the backlog of reports
- SPOOLER command, To clear the backlog of reports
- SPU Configurator, Introducing the SPU Configurator
- SPU Switchover, HFS Directories and High-Availability Products
- SPU Switchover/XL, Introducing the SPU Configurator
- STACK
- MISC configurator command, To set sizes of NM and CM stacks
- stacks
- setting sizes of compatibility mode, To set sizes of NM and CM stacks
- setting sizes of native mode, To set sizes of NM and CM stacks
- standard device types
- specifying, To configure default device attributes
- starting the system, Starting the System
- state
- UNKNOWN, To check nonsystem volumes
- status
- volume, To display information about all mounted volumes
- storage
- permanent, Managing Types of Volume Sets
- permanent and transient, Managing Types of Volume Sets
- transient, Managing Types of Volume Sets
- STORE command
- full system backup, To perform a full system backup
- partial system backup, To perform an incremental system backup
- strings
- setting, To set strings and string parameters
- strings parameters
- setting, To set strings and string parameters
- subdirectory, Managing Directories
- SYGEN
- configuring I/O devices, Configuring Devices with SYSGEN
- syntax, Expanded File Naming Syntax
- HFS, Expanded File Naming Syntax
- SYSFILE
- SYSGEN command, To access the SYSFILE configurator
- SYSFILE configurator, Changing System Libraries, Programs, and Message Catalogs
- entering, To access the SYSFILE configurator
- help, To use online help
- SYSFILE configurator commands
- AAUTO, To add objects to the SLT
- ABOOT, To add objects to the SLT, To add boot files
- ACMSL, To add objects to the SLT, To add a segment to the CMSL
- ASPROG, To add objects to the SLT, To add file names to save to tape
- CMSL, To use a segmented library file as CMSL
- DAUTO, To delete objects from the SLT, To delete autoboot images
- DBOOT, To delete objects from the SLT, To delete boot images
- DCMSL, To delete objects from the SLT, To delete compatibility mode segments
- DSPROG, To delete objects from the SLT, To delete system programs
- help, To use online help
- LCMSL, To list CMSL contents
- RAUTO, To replace objects on the SLT
- RBOOT, To replace objects on the SLT, To replace boot images
- RCAT, To replace objects on the SLT, To configure a message catalog
- RCMSL, To replace objects on the SLT, To replace a CMSL segment
- RDCC, To replace objects on the SLT, To replace or define a network configuration file
- RIPL, To replace objects on the SLT, To replace an IPL image
- RNMLIB, To replace objects on the SLT, To replace the native mode library
- RSPROG, To replace objects on the SLT, To replace a system program
- SHOW, To display current file information
- SYSGEN, Getting Started Defining Your System
- cross-validation with NMCONFIB.PUB.SYS, Cross-Validating NMCONFIG. PUB.SYS with SYSGEN
- help, To use online help
- SYSGEN commands
- BASEGROUP, Adding an HP-IB Disk Drive
- HELP, To use online help
- IO, Adding an HP-IB Disk Drive
- KEEP, Adding an HP-IB Disk Drive
- LOG, To enter the LOG configurator
- MISC, To access the MISC configurator
- PERMYES, To confirm potentially serious actions
- SHOW, To show the state of the configurators
- SYSFILE, To access the SYSFILE configurator
- TAPE, To create system load tapes
- SYSGEN Utility
- creating a system load tape, To create system load tapes
- SYSGEN utility
- Accessing other configurators, To access other configurators
- activating the configurators, To access other configurators
- Configurator commands, To access other configurators
- confirming serious actions, To confirm potentially serious actions
- entering the LOG configurator, To enter the LOG configurator
- SYSTEM
- MISC configurator command, To set strings and string parameters
- system backup, Planning Your Backup Strategy
- creating a schedule, Creating a Backup Schedule
- full, To perform a full system backup
- using RESTORE command, Planning Your Backup Strategy
- using STORE command, Planning Your Backup Strategy
- using SYSGEN , Planning Your Backup Strategy
- VSTORE command, Verifying Your Backup Media
- system backups
- cumulative, To perform a cumulative system backup
- partial, To perform an incremental system backup
- system configuration
- adding a disk drive to, Adding an HP-IB Disk Drive
- System connections for the 900 series computers , Identifying System Connections
- system failure, Managing Disks
- system file configurator
- see SYSFILE configurator, Changing System Libraries, Programs, and Message Catalogs
- system generator, Getting Started Defining Your System
- system image, Managing Types of Volume Sets
- system load tape, Getting Started Defining Your System
- system logging, To review UPS activity recorded in the system log file, Defining Events to Be Recorded, To log system events
- system master volume
- LDEV1, To manage master and member volumes
- system program
- replacing, To replace a system program
- system reset
- conditions of, Understanding System Resets
- description of, Understanding System Resets
- hardware, Understanding System Resets
- performing, Understanding System Resets
- RS command, Understanding System Resets
- software, Understanding System Resets
- TC command, Understanding System Resets
- system shutdown
- overview, Shutting Down the System
- system start up, Starting the System
- system supervisor capability, Getting Started Defining Your System
- system volume set, Managing Types of Volume Sets
- master, To manage master and member volumes
T- TAPE
- SYSGEN command, To create system load tapes
- TC, To save main memory to tape
- TD access, To control access to directories, To delete directories, Directory permissions
- TELL command, To warn users a few minutes before the shutdown
- Threshold
- Concept, Configuring a Threshold
- Threshold Manager commands
- functions, Using Threshold Manager Commands
- tombstone, Understanding System Resets
- transient storage, Managing Types of Volume Sets
- traverse directory entries, To control access to directories
- TREE option, To list the space used by directories, To display disk usage information
U- UID, Setting Up Accounts, Groups, and Users, The Group and User Databases
- ULOG
- LOG configurator command, To control user logging
- UNKNOWN state, To check nonsystem volumes
- unscratching a volume
- UNSCRATCHVOL, To unscratch a volume
- UNSCRATCHVOL
- unscratching a volume, To unscratch a volume
- UPS configuration, To configure the first UPS on a Series 9X8, To configure a UPS connected via a DTC port
- UPS device
- configuring, To configure a UPS
- UPS device class name, To configure the first UPS on a Series 9X8
- UPS devices, Introducing the UPS and UPS Monitor/iX Software
- system logging, To enable logging of UPS activity
- UPS events, reviewing, To review UPS activity recorded in the system log file
- UPS Monitor/iX software, Introducing the UPS and UPS Monitor/iX Software, To use UPS Monitor/iX software
- UPS, Series 991 and Series 995, To understand the Uninterruptible Power Supply (UPS)
- USE
- commands, To execute a file from Threshold Manager
- use volumes (UV) capability, To access VOLUTIL
- use volumes capability, Managing Disks
- user ID (UID), Setting Up Accounts, Groups, and Users, To create accounts
- user ID database, The Group and User Databases
- user logging, Defining Events to Be Recorded, To control user logging
- users
- creating, To create users
- using a segmented library file as CMSL, To use a segmented library file as CMSL
- Using the Control A command, To recognize local/remote console capabilities
- Using the Control B command, To recognize local/remote console capabilities
- using the I/O configurator, Using SYSGEN's I/O Configurator
- UV capability, Managing Disks
V- volume
- duplicate, To check nonsystem volumes
- master, To manage master and member volumes
- member, To manage master and member volumes
- mountable, Managing Types of Volume Sets
- mounted, Managing Types of Volume Sets
- volume class
- adding a volume with EXPANDCLASS, To add additional volumes to an existing volume class
- displaying with SHOWSET, To display information about volume sets
- volume master, Managing Types of Volume Sets
- contents, Managing Types of Volume Sets
- volume set, To manage master and member volumes
- defining, Creating a Nonsystem Volume Set
- definition, To manage master and member volumes
- name, Managing Types of Volume Sets, To manage master and member volumes
- system, Managing Types of Volume Sets
- types, Managing Types of Volume Sets
- volume sets
- differences, Managing Types of Volume Sets
- mounted, To manage master and member volumes
- nonsystem, Managing Types of Volume Sets
- system and nonsystem, Managing Types of Volume Sets
- system vs nonsystem, Managing Types of Volume Sets
- volume states
- checking, To display information about all mounted volumes
- SCRATCH, To scratch a volume
- volume status, To display information about all mounted volumes
- accessible, To display information about all mounted volumes, To check nonsystem volumes
- checking, To check all volumes
- inaccessible, To display information about all mounted volumes, To check nonsystem volumes
- loner, To check nonsystem volumes
- volumes
- adding, To add volumes, Managing Types of Volume Sets
- defined, To list volumes
- deleting, To delete volumes
- listing, To list volumes
- master and member, To manage master and member volumes
- modifying, To modify volumes
- VOLUTIL, To check nonsystem volumes
- adding volumes, Managing Types of Volume Sets
- ALTERVOL command, To change the disk storage
- EXPANDCLASS command, To add additional volumes to an existing volume class
- HELP command, To use online help
- INITVOL command, To add members to the volume set
- NEWCLASS command, To create volume classes
- NEWSET command, To define the volume set
- NEWVOL command, To add members to the volume set
- SCRATCHVOL command, To scratch a volume
- SHOWSET command, To display information about volume sets
- UNSCRATCHVOL command, To unscratch a volume
- VSCLOSE command, To check nonsystem volumes
- volutil, To recover corrupted disk files
- VOLUTIL prompt, To display information about all mounted volumes, To add members to the volume set, To create volume classes, To add additional volumes to an existing volume class, To display information about volume sets, To change the disk storage, To unscratch a volume
- VOLUTIL, starting, To access VOLUTIL
- VSCLOSE command, To check nonsystem volumes, Reinitializing a Volume
- VSTORE command
- DIRECTORY parameter, Verifying Your Backup Media
- LOCAL parameter, Verifying Your Backup Media
- ONERR=QUIT, Verifying Your Backup Media
- SHOW parameter, Verifying Your Backup Media
- system backup, Verifying Your Backup Media
- verifying backup media, Verifying Your Backup Media
|