HP 3000 Manuals HP 3000 Manuals
Phase M. Generating a Report to Verify the Configuration You used the List and Show screens to check your configuration in several of the phases. Now you'll use the Report Main screen to print a complete report on how Access Server has been configured. If you don't want to generate this report, skip to Step M-7. When the product is installed, password options are set so that passwords are displayed in the Configuration screens and in printouts from those screens, but suppressed in reports generated from the Report Main screen. If you want passwords suppressed in this report, skip to Step M-3. Make Passwords Visible in Report (Primary DBA Only) --------------------------------------------------------------------------------------------- | | | | What You Do | What Happens | | | | --------------------------------------------------------------------------------------------- | | | | M-1. Type PW in the Go to screen field and | The Password Options (PW) screen appears. | | press Enter. | | | | | --------------------------------------------------------------------------------------------- | | | | M-2. Type an X in the Show passwords | The password options you specified are | | (Report) field and press Enter. | stored in the data dictionary and the | | | Administrator Utility Main Menu appears. | | | | --------------------------------------------------------------------------------------------- Generating a Report Primary DBAs will get a full report, secondary DBAs will get a "stripped down" report that shows only those details that concern data sources and tables in the secondary DBA's control. --------------------------------------------------------------------------------------------- | | | | What You Do | What Happens | | | | --------------------------------------------------------------------------------------------- | | | | M-3. If you are at the Administrator | | | Utility Main Menu, choose Report f3. | | | | | | If you skipped Steps M-1 and M-2, type RM | The Report Main screen appears. | | in the Go to screen field and press Enter. | | | | | --------------------------------------------------------------------------------------------- | | | | M-4. Chooses Config f1. | The Report on Configuration screen appears. | | | | --------------------------------------------------------------------------------------------- | | | | M-5. Choose Select All f1. | The Administrator Utility prints all | | | configuration information to the file | | | ADMLIST. The generation of this report may | | | take a long time. | | | | | | The report is not printed until you exit | | | from the Administrator Utility. | | | | --------------------------------------------------------------------------------------------- | | | | M-6. Choose Done f8. | The Administrator Utility Main Menu | | | appears. | | | | | Choose Exit ADMIN f8 to exit from the | The Administrator Utility completes its | | Administrator Utility. | operation and the MPE prompt returns. Your | | | report is then printed. | | | | --------------------------------------------------------------------------------------------- Checking a Report --------------------------------------------------------------------------------------------- | | | | What You Do | What Happens | | | | --------------------------------------------------------------------------------------------- | | | | M-6. Review the report. | | | | | | If there are any discrepancies between your | The Administrator Utility makes the | | worksheets and what you see on the report, | appropriate additions, changes, and | | use the appropriate Add, Change, and Delete | deletions to the data dictionary. | | screens to correct the information. | | | | | --------------------------------------------------------------------------------------------- Making Access Server Available --------------------------------------------------------------------------------------------- | | | | What You Do | What Happens | | | | --------------------------------------------------------------------------------------------- | | | | M-7. If you're still in the Administrator | | | Utility, exit at this point by typing E in | | | the Go to screen field and pressing Enter. | | | | | | M-8. At the MPE prompt, enable Access | Access Server is now available to all | | Server, either by using the UDC command | configured users (and to default users if | | ENABLEAC, or by typing | you've allowed them). | | RUN`ADMIN.PPC.SYS;PARM=1;INFO= | | | "ADMIN/password" and pressing Return. | | | | | ---------------------------------------------------------------------------------------------