HP 3000 Manuals HP 3000 Manuals
(S/R) (Continued)
------------------------------------------------------------
770 MESSAGE EXPECTED 'LDEV=ldev' WHERE ldev IS A POSITIVE
INTEGER. SYSGEN/STORE INTERFACE ERROR. (S/R 770)
CAUSE You have not entered a ldev number for LDEV option
in your command.
ACTION Retype the command and include a ldev number.
-------------------------------------------------------------
771 MESSAGE EXPECTED 'ldev TO BE WITHIN THE RANGE OF A
POSITIVE INTEGER. SYSGEN/STORE INTERFACE ERROR.
(S/R 771)
CAUSE You have entered an invalid number for LDEV option.
ACTION Retype the command and include a valid ldev number.
-------------------------------------------------------------
773 MESSAGE WARNING: 'REELNUM' OPTION HAS BEEN REDUNDANTLY
SPECIFIED. SYSGEN/STORE INTERFACE ERROR. (S/R 773)
CAUSE The REELNUM option was entered more than once.
ACTION Information only.
-------------------------------------------------------------
774 MESSAGE 'REELNUM' OPTION CANNOT BE USED WITH THE
'TRANSPORT' TO MPEv. SYSGEN/STORE INTERFACE ERROR.
(S/R 774)
CAUSE REELNUM and TRANSPORT options are not allowed with
the same command line.
ACTION TRANSPORT option is not valid with STORE command
from SYSGEN. Check the syntax and retype the
command.
-------------------------------------------------------------
775 MESSAGE EXPECTED '=reelnum' AFTER 'REELNUM' OPTION.
SYSGEN/STORE INTERFACE ERROR. (S/R 775)
CAUSE You have not entered a '=' sign after the REELNUM
option in your command.
ACTION Retype the command and include '=' sign with your
command.
-------------------------------------------------------------
776 MESSAGE EXPECTED 'REELNUM=reelnum' WHERE reelnum IS A
POSITIVE INTEGER. SYSGEN/STORE INTERFACE ERROR.
(S/R 776)
CAUSE You have not entered any value for REELNUM option
in your command.
ACTION Retype the command and include a number for REELNUM
option.
-------------------------------------------------------------
777 MESSAGE EXPECTED reelnum TO BE WITHIN THE RANGE OF A
POSITIVE INTEGER. SYSGEN/STORE INTERFACE ERROR.
(S/R 777)
CAUSE You have entered an invalid number for REELNUM
option in your comma nd.
ACTION Retype the command and include a valid number for
REELNUM option.
-------------------------------------------------------------
779 MESSAGE WARNING: 'SLTDATE' OPTION HAS BEEN REDUNDANTLY
SPECIFIED. SYSGEN/STORE INTERFACE ERROR. (S/R 779)
CAUSE The SLTDATE option was entered more than once.
ACTION Information only.
-------------------------------------------------------------
780 MESSAGE 'SLTDATE' OPTION CANNOT BE USED WITH THE
'TRANSPORT' TO MPEv. SYSGEN/STORE INTERFACE ERROR.
(S/R 780)
CAUSE SLTDATE and TRANSPORT options are not allowed on
the same command line.
ACTION TRANSPORT option is invalid when a combined
SLT/Store set is created. Delete the TRANSPORT
option from your command line.
-------------------------------------------------------------
781 MESSAGE EXPECTED '=date' AFTER 'SLTDATE' OPTION.
SYSGEN/STORE INTERFACE ERROR. (S/R 781)
CAUSE You did not include a '=' sign for SLTDATE option.
ACTION Retype the command and include a '=' sign for
SLTDATE option.
-------------------------------------------------------------
782 MESSAGE EXPECTED 'SLTDATE=date' WHERE date IS A POSITIVE
INTEGER. SYSGEN/STORE INTERFACE ERROR. (S/R 782)
CAUSE You did not include a valid number for SLTDATE
option.
ACTION Check the syntax and include a valid number for
SLTDATE opion.
-------------------------------------------------------------
783 MESSAGE EXPECTED date TO BE WITHIN THE RANGE OF A
POSITIVE INTEGER. SYSGEN/STORE INTERFACE ERROR.
(S/R 783)
CAUSE You did not include a valid number for DATE option.
ACTION Check the syntax and include a valid number for
DATE option.
-------------------------------------------------------------
785 MESSAGE WARNING: 'TIME' OPTION HAS BEEN REDUNDANTLY
SPECIFIED. SYSGEN/STORE INTERFACE ERROR. (S/R 785)
CAUSE The TIME option was entered more than once.
ACTION Information only.
-------------------------------------------------------------
786 MESSAGE 'TIME' OPTION CANNOT BE USED WITH THE 'TRANSPORT'
TO MPEv. SYSGEN/STORE INTERFACE ERROR. (S/R 786)
CAUSE TIME and TRANSPORT options are not allowed on the
same command line.
ACTION TRANSPORT option is invalid when combined SLT/Store
Set is created. Check your syntax and retype the
command.
-------------------------------------------------------------
787 MESSAGE EXPECTED '=time' AFTER 'TIME' OPTION.
SYSGEN/STORE INTERFACE ERROR. (S/R 787)
CAUSE You did not include a '=' sign after the TIME
option in your command line.
ACTION Retype the command and include '=' sign after the
TIME option.
-------------------------------------------------------------
788 MESSAGE EXPECTED 'TIME=time' WHERE time IS A POSITIVE
INTEGER. SYSGEN/STORE INTERFACE ERROR. (S/R 788)
CAUSE You have not entered a valid number for TIME
parameter.
ACTION Retype the command and include a valid number for
TIME parameter.
-------------------------------------------------------------
789 MESSAGE EXPECTED time TO BE WITHIN THE RANGE OF A
POSITIVE INTEGER. SYSGEN/STORE INTERFACE ERROR.
(S/R 789)
CAUSE You did not include a valid number for the TIME
option.
ACTION Check the syntax and enter a valid number for TIME
option.
-------------------------------------------------------------
791 MESSAGE WARNING: 'SYNTAX' OPTION HAS BEEN REDUNDANTLY
SPECIFIED. SYSGEN/STORE INTERFACE ERROR. (S/R 791)
CAUSE The SYNTAX option was entered more than once.
ACTION Information only.
-------------------------------------------------------------
792 MESSAGE 'SYNTAX' OPTION CANNOT BE USED WITH THE
'TRANSPORT' TO MPEv. SYSGEN/STORE INTERFACE ERROR.
(S/R 792)
CAUSE SYNTAX and TRANSPORT options are not allowed on the
same command line.
ACTION TRANSPORT is not valid when creating combined
SLT/Store Set tape. Delete TRANSPORT option and
retype the command.
-------------------------------------------------------------
793 MESSAGE WARNING: 'NOLOCK' OPTION HAS BEEN REDUNDANTLY
SPECIFIED. SYSGEN/STORE INTERFACE ERROR. (S/R 793)
CAUSE The NOLOCK option was entered more than once.
ACTION Information only, no action required.
-------------------------------------------------------------
794 MESSAGE 'NOLOCK' OPTION CANNOT BE USED WITH THE
'TRANSPORT' TO MPEv. SYSGEN/STORE INTERFACE ERROR.
(S/R 794)
CAUSE NOLOCK and TRANSPORT options are not allowed on the
same command line.
ACTION Delete either NOLOCK or TRANSPORT option and retype
the command.
-------------------------------------------------------------
795 MESSAGE 'NOLOCK' OPTION CANNOT BE USED WITH THE 'ONLINE'
OPTION. SYSGEN/STORE INTERFACE ERROR. (S/R 795)
CAUSE NOLOCK and ONLINE options are not allowed on the
same command line.
ACTION Delete either NOLOCK or ONLINE option and retype
the command.
-------------------------------------------------------------
796 MESSAGE 'NOLOCK' OPTION CANNOT BE USED WITH THE 'SPLITVS'
OPTION. SYSGEN/STORE INTERFACE ERROR. (S/R 796)
CAUSE NOLOCK and SPLITVS options are not allowed on the
same command line.
ACTION Delete either NOLOCK or SPLITVS option and retype
the command.
-------------------------------------------------------------
797 MESSAGE WARNING: 'RENAME' OPTION HAS BEEN REDUNDANTLY
SPECIFIED. (S/R 797)
CAUSE The RENAME option was entered more than once.
ACTION Information only.
-------------------------------------------------------------
798 MESSAGE 'RENAME' OPTION CANNOT BE USED WITH 'TRANSPORT'
TO MPEv. (S/R 798)
CAUSE Specification of RENAME;TRANSPORT; as options to
STORE.
ACTION Do not use TRANSPORT with RENAME or vice versa.
RENAME is only supported on MPE/iX.
-------------------------------------------------------------
799 MESSAGE 'RENAME' OPTION CANNOT BE USED WITH THE 'SPLITVS'
OPTION. (S/R 799)
CAUSE Specification of RENAME;SPLITVS as options to
STORE.
ACTION Do not use them together. RENAME is not supported
for SPLITVS.
-------------------------------------------------------------
800 MESSAGE 'RENAME' OPTION CANNOT BE USED WITH THE 'PURGE'
OPTION. (S/R 800)
CAUSE RENAME and PURGE options are not allowed on the
same command line.
ACTION Delete either RENAME or PURGE option and retype the
command.
-------------------------------------------------------------
801 MESSAGE SPECIFIED FUNCTION (OPTION) IS NOT IMPLEMENTED ON
THIS RELEASE. (S/R 801)
CAUSE Same as message content.
ACTION Check the syntax and retype the command.
-------------------------------------------------------------
802 MESSAGE MAXIMUM ALLOWABLE NUMBER OF DEVICE FILE EQUATIONS
HAS BEEN EXCEEDED. (S/R 802)
CAUSE You specified too many device file equations.
ACTION Check the syntax and retype the command.
-------------------------------------------------------------
803 MESSAGE DEVICE FILE EQUATION NAME EXCEEDS THE MAXIMUM
ALLOWED LENGTH. (S/R 803)
CAUSE Same as the message content.
ACTION Check the syntax and retype the command.
-------------------------------------------------------------
804 MESSAGE EXPECTED ONE OF: SHOW, ONERROR, LOCAL, GROUP,
ACCOUNT, CREATE, CREATOR, GID, KEEP, NOKEEP,
OLDDATE, NEWDATE, LISTDIR, DIRECTORY, FCRANGE,
FILES, DEV, VOL, VOLCLASS, VOLSET, COPYACD, NOACD,
TREE, NOTREE. TURBOSTORE ONLY OPTIONS: RESTORESET,
MOSET, NAME. (S/R 804)
CAUSE You did not enter a valid option.
ACTION Retype the command with valid options.
-------------------------------------------------------------
805 MESSAGE EXPECTED ONE OF: SHOW, ONERROR, DATES, PURGE,
PROGRESS, DIRECTORY, FILES, TRANSPORT, COPYACD,
NOACD, MAXTAPEBUF, FCRANGE, NOTIFY, ONVS, SPLITVS,
RENAME, TREE, NOTREE. TURBOSTORE ONLY OPTIONS:
INTER, ONLINE, STORESET, COMPRESS, MOSET, NAME.
(S/R 805)
CAUSE You did not enter a valid option.
ACTION Retype the command with valid options.
-------------------------------------------------------------
806 MESSAGE EXPECTED A SEMICOLON ";" TO SEPARATE OPTIONS.
(S/R 806)
CAUSE You did not include a semicolon in-between the
options.
ACTION Check the syntax and retype the command.
-------------------------------------------------------------
807 MESSAGE EXPECTED A SEMICOLON ";" TO SEPARATE THE DEVICE
FILE EQUATION (restorefile) AND THE filesetlist.
SYNTAX
'RESTORE [restorefile] [;[filesetlist]
[;option[;..]]]' (S/R 807)
CAUSE You did not include a semicolon in-between device
file equations.
ACTION Check the syntax and retype the command.
-------------------------------------------------------------
808 MESSAGE EXPECTED DEVICE FILE EQUATION (restorefile) TO
FOLLOW RESTORE COMMAND WHERE THE DEVICE FILE
EQUATION SPECIFIES THE SOURCE DEVICE FROM WHICH THE
FILES WILL BE RESTORED. SYNTAX
'RESTORE [restorefile] [;[filesetlist]
[;option[;..]]]' (S/R 808)
CAUSE You did not specify device file equation.
ACTION Check the syntax and retype the command.
-------------------------------------------------------------
809 MESSAGE EXPECTED A SEMICOLON ";" TO SEPARATE THE
filesetlist FROM THE DEVICE FILE EQUATION
(storefile). SYNTAX
'STORE [filesetlist] [;[storefile] [;option[;..]]]'
(S/R 809)
CAUSE You did not include a semicolon in between
filesetlists.
ACTION Check the syntax and retype the command.
-------------------------------------------------------------
810 MESSAGE EXPECTED A SEMICOLON ";" TO SEPARATE THE DEVICE
FILE EQUATION (storefile) FROM THE STORE OPTIONS.
SYNTAX
'STORE [filesetlist] [;[storefile] [;option[;..]]]'
(S/R 810)
CAUSE You did not include a semicolon in between device
file equations.
ACTION Check the syntax and retype the command.
-------------------------------------------------------------
811 MESSAGE EXPECTED DEVICE FILE EQUATION (storefile) TO
FOLLOW filesetlist SPECIFICATION, WHERE THE DEVICE
FILE EQUATION SPECIFIES THE DESTINATION DEVICE ONTO
WHICH THE FILES WILL BE STORED. SYNTAX
'STORE [filesetlist] [;[storefile] [;option[;..]]]'
(S/R 811)
CAUSE You did not include a device file equation.
ACTION Check the syntax and retype the command.
-------------------------------------------------------------
812 MESSAGE EXPECTED 'STORE' 'VSTORE' OR 'RESTORE' COMMAND TO
BE SPECIFIED. SYNYAX 'STORE [filesetlist]
[;storefile] [;option [; ]]]' SYNTAX
'RESTORE [restorefile] [;[filesetlist]
[;option[;..]]]' SYNTAX
'VSTORE [vstorefile] [;[filesetlist]
[;option[;..]]]' (S/R 812)
CAUSE You did not type a valid command.
ACTION Retype the command.
-------------------------------------------------------------
813 MESSAGE ERROR PARSING INDIRECT FILE "!" AT LINE #! (S/R
813)
CAUSE Same as message content.
ACTION Check you indirect file.
-------------------------------------------------------------
814 MESSAGE 'GROUP' PARAMETER OF THE 'CREATE' OPTION REQUIRES
(SM) AND/OR (CV) CAPABILITY TO CREATE GROUPS ON
USER VOLUMES. (S/R 814)
CAUSE You do not have SM or CV capability.
ACTION Log on to an account with either SM or CV
capability.
-------------------------------------------------------------
815 MESSAGE 'LDEV' OPTION CANNOT BE USED IN AN INDIRECT FILE.
SYSGEN/STORE INTERFACE ERROR. (S/R 815)
CAUSE LDEV option is not allowed with STORE command from
SYSGEN in an indirect file.
ACTION Check the syntax and retype the command.
-------------------------------------------------------------
816 MESSAGE 'REELNUM' OPTION CANNOT BE USED IN AN INDIRECT
FILE. SYSGEN/STORE INTERFACE ERROR. (S/R 816)
CAUSE REELNUM option is not allowed with the STORE
command from SYSGEN in an indirect file.
ACTION Check the syntax and retype the command.
-------------------------------------------------------------
817 MESSAGE 'SLTDATE' OPTION CANNOT BE USED IN AN INDIRECT
FILE. SYSGEN/STORE INTERFACE ERROR. (S/R 817)
CAUSE SLTDATE with STORE command from sysgen in an
indirect file.
ACTION Check the syntax and retype the command.
-------------------------------------------------------------
818 MESSAGE 'TIME' OPTION CANNOT BE USED IN AN INDIRECT FILE.
SYSGEN/STORE INTERFACE ERROR. (S/R 818)
CAUSE The option TIME is not allowed with the store
command from sysgen in an indirect file.
ACTION Check the syntax and retype the command.
-------------------------------------------------------------
819 MESSAGE 'SYNTAX' OPTION CANNOT BE USED IN AN INDIRECT
FILE. SYSGEN/STORE INTERFACE ERROR. (S/R 819)
CAUSE SYNTAX option is not allowed with store command
from SYSGEN in an indirect file.
ACTION Check the syntax and retype the command.
-------------------------------------------------------------
820 MESSAGE SYSGEN OPTIONS NOT ALL SPECIFIED. SYSGEN/STORE
INTERFACE ERROR. (S/R 820)
CAUSE The options passed by SYSGEN to store command are
incomplete.
ACTION Internal error.
-------------------------------------------------------------
821 MESSAGE MAXIMUM NUMBER OF PARALLEL SETS EXCEEDED FOR
'STORESET' OPTION. Ex., 'STORESET =(*ta),(*tb)' IS
TWO PARALLEL SETS (S/R 821)
CAUSE You have exceeded the maximum number of parallel
set allowed for STORESET option, which is 16.
ACTION Retype the command and make sure not to exceed 16
parallel sets.
-------------------------------------------------------------
822 MESSAGE STORING TO A DISK FILE IS NOT AVAILABLE ON YOUR
VERSION OF STORE .
CAUSE Storing to disc is not available on this version of
STORE.
ACTION You must purchase TurboSTORE/iX 7x24 True-Online
Backup to get this functionality.
-------------------------------------------------------------
901 MESSAGE WARNING: 'ONLINE' OPTION HAS BEEN REDUNDANTLY
SPECIFIED (S/R 901)
CAUSE The ONLINE option was entered more than once.
ACTION Information only.
-------------------------------------------------------------
902 MESSAGE 'ONLINE' OPTION CANNOT BE USED WITH THE 'SPLITVS'
OPTION (S/R 902)
CAUSE ONLINE and SPLITVS options are not allowed on the
same command line.
ACTION Delete either ONLINE or SPLITVS option and retype
the command.
-------------------------------------------------------------
903 MESSAGE 'ONLINE' OPTION CANNOT BE USED WITH THE 'DYNAMIC'
OPTION (S/R 903)
CAUSE ONLINE and DYNAMIC options are not allowed on the
same command line.
ACTION Delete either ONLINE or DYNAMIC option and retype
the command.
-------------------------------------------------------------
904 MESSAGE 'ONLINE' OPTION CANNOT BE USED WITH THE
'TRANSPORT' TO MPEv (S/R 904)
CAUSE ONLINE and TRANSPORT options are not allowed on the
same command line.
ACTION CMSTORE and V/E cannot handle ONLINE option.
Delete either ONLINE or TRANSPORT option and retype
the command.
-------------------------------------------------------------