HP 3000 Manuals HP 3000 Manuals
Interpreting the System Status Line
When in control mode, the AP displays the system status line across the
softkey labels of the system console. The system status line has this
format:
________________________________________________________________________
| |
| |
| CODE: xxxx REMOTE: < 1 > < 2 > < 3 > ACCESS FAULT: yy |
| |
________________________________________________________________________
Table A-1 describes the information presented in the status line.
Table A-1. Status Line Display
---------------------------------------------------------------------------------------------
| | |
| Field | Meaning |
| | |
---------------------------------------------------------------------------------------------
| | |
| xxxx | Represents the four digit LED error code display. |
| | |
---------------------------------------------------------------------------------------------
| | |
| 1 | May have one of three values: enabled, pending, or disabled. These |
| | correspond to the status of the remote console accessibility. The remote |
| | console can either be accessed (enabled), disconnected (disabled), or |
| | waiting for a user session to end (pending). |
| | |
---------------------------------------------------------------------------------------------
| | |
| 2 | May be either active or inactive. Active indicates that a remote console |
| | is currently being used. Inactive indicates that a remote console is not |
| | currently being used. |
| | |
---------------------------------------------------------------------------------------------
| | |
| 3 | May have one of two values: single or multiple. This designates whether |
| | the AP allows a single attempt (single) or multiple attempts (multiple) to |
| | access the remote console. |
| | |
---------------------------------------------------------------------------------------------
| | |
| yy | Displays the number of times someone tried to access the remote console |
| | but failed to give the proper password. |
| | |
---------------------------------------------------------------------------------------------
The status line is updated with each change, such as when the system
cycles through its self-test.