HP 3000 Manuals HP 3000 Manuals
Chapter 80 Terminal I/O Manager for Logging
(Subsystem 128)
--------------------------------------------------------------
---------------------------------------------------------------
1 MESSAGE An interface warning occurred.
---------------------------------------------------------------
2 MESSAGE An interface nonfatal error occurred.
---------------------------------------------------------------
3 MESSAGE An interface fatal error occurred.
---------------------------------------------------------------
4 MESSAGE A system call warning occurred.
---------------------------------------------------------------
5 MESSAGE A system call nonfatal error occurred.
---------------------------------------------------------------
6 MESSAGE A system call fatal error occurred.
---------------------------------------------------------------
7 MESSAGE An internal warning occurred.
---------------------------------------------------------------
8 MESSAGE An internal nonfatal error occurred.
---------------------------------------------------------------
9 MESSAGE An internal fatal error occurred.
---------------------------------------------------------------
10 MESSAGE An internal event occurred.
---------------------------------------------------------------
11 MESSAGE A protocol error occurred.
---------------------------------------------------------------
12 MESSAGE A hardware warning occurred.
---------------------------------------------------------------
13 MESSAGE A hardware nonfatal error occurred.
---------------------------------------------------------------
14 MESSAGE A hardware fatal error occurred.
---------------------------------------------------------------
15 MESSAGE A backplane fatal error occurred.
---------------------------------------------------------------
16 MESSAGE A reset message was received.
---------------------------------------------------------------
17 MESSAGE A DTC log warning occurred.
---------------------------------------------------------------
18 MESSAGE A DTC log nonfatal error occurred.
---------------------------------------------------------------
19 MESSAGE A DTC log fatal error occurred.
---------------------------------------------------------------
101 MESSAGE ! code download started for DTC address !
---------------------------------------------------------------
102 MESSAGE ! code download completed for DTC address !
---------------------------------------------------------------
103 MESSAGE ! code download aborted for DTC address !
---------------------------------------------------------------
107 MESSAGE ! upload started for DTC address !
---------------------------------------------------------------
108 MESSAGE ! upload completed for DTC address !
---------------------------------------------------------------
109 MESSAGE ! upload aborted for DTC address !
---------------------------------------------------------------
111 MESSAGE DTCMxxxxxxxx SNP card upload started for DTC
address yyyyyyyyyyyy card z. (DTCMINFO111)
CAUSE This informational message indicates that an
operation of the SNP card upload starts. For
example : The card upload starts on an SNP card in
slot 3 of DTC IEEE802.3 address at 0800090035A4,
the console message will be : DTCMxxxxxxxx SNP
card upload started for DTC address 0800090035A4
card 3.
ACTION Wait for the SNP card upload to complete. The SNP
card upload completion message will be shown on the
console.
---------------------------------------------------------------
112 MESSAGE DTCMxxxxxxxx SNP card upload completed for DTC
address yyyyyyyyyyyy card z. (DTCMINFO112)
CAUSE This informational message indicates that an
operation of the SNP card upload completes. For
example : The card upload completes on an SNP card
in slot 3 of DTC IEEE802.3 address at 0800090035A4,
the console message will be : DTCMxxxxxxxx SNP
card upload completed for DTC address 0800090035A4
card 3.
ACTION Deliver the SNP dump file to your HP support
representative. The SNP dump file name is
Sbxxxxxa.PUB.SYS. Where b is the card number in
that DTC, xxxxx is the last 5 characters of the
IEEE802.3 address of that DTC and a is a charater
in the sequense a,b,..z to allow multiple dumps.
---------------------------------------------------------------
113 MESSAGE DTCMxxxxxxxx SNP card upload aborted for DTC
address yyyyyyyyyyyy card z (DTCMERR113)
CAUSE This error message indicates that an operation of
the SNP card upload was aborted by the DTC. A
problem occured with the DTC while the SNP card
upload were being performed. For example : The
card upload was aborted on an SNP card in slot 3 of
DTC IEEE802.3 address at 0800090035A4, the console
message will be : DTCMxxxxxxxx SNP card upload
aborted for DTC address 0800090035A4 card 3.
ACTION Contact your HP support representative. You can
obtain the additional information by running the
card selftest through the Termdsm.
---------------------------------------------------------------
114 MESSAGE DTCMxxxxxxxx SNP card tracing aborted for DTC
address yyyyyyyyyyyy card z (DTCMERR114)
CAUSE This error message indicates that an operation of
the SNP card tracing was aborted. This may be
caused by a DTC reset/upload or SNP card
reset/upload.
For example : The card tracing was aborted on an
SNP card in slot 1 of DTC IEEE802.3 address at
080009003544, the console message will be :
DTCMxxxxxxxx SNP card tracing aborted for DTC
address 080009003544 card 1
ACTION Contact with the HP support representative.
---------------------------------------------------------------
115 MESSAGE DTCMxxxxxxxx MUX card upload started for DTC
address yyyyyyyyyyyy card z (DTCMINFO115)
CAUSE This informational message indicates that an
operation of the MUX 68k card upload starts. For
example : The card upload starts on a MUX 68k card
in slot 2 of DTC IEEE802.3 address at 08000900357D,
the console message will be : DTCMxxxxxxxx MUX
card upload started for DTC address 08000900357D
card 2.
ACTION Wait for the MUX 68k card upload to complete. The
MUX card upload completion message will be shown on
the console.
---------------------------------------------------------------
116 MESSAGE DTCMxxxxxxxx MUX card upload completed for DTC
address yyyyyyyyyyyy card z (DTCMINFO116)
CAUSE This informational message indicates that an
operation of the MUX 68k card upload completes.
For example : The card upload completes on a MUX
68k card in slot 2 of DTC IEEE802.3 address at
08000900357D, the console message will be :
DTCMxxxxxxxx MUX card upload completed for DTC
address 08000900357D card 2
ACTION Deliver the MUX 68k dump file to your HP support
representative. The dump file name is
Mbxxxxxa.PUB.SYS. Where b is the card number in
that DTC, xxxxx is the last 5 characters of the
IEEE802.3 address of that DTC and a is a charater
in the sequense a,b,..z to allow multiple dumps.
---------------------------------------------------------------
117 MESSAGE DTCMxxxxxxxx MUX card upload aborted for DTC
address yyyyyyyyyyyy card z (DTCMERR117)
CAUSE This error message indicates that an operation of
the MUX 68k card upload is aborted by the DTC. A
problem occurred with DTC while the MUX card upload
were being performed. For example : The card
upload is aborted on a MUX 68k card in slot 2 of
DTC IEEE802.3 address at 08000900357D, the console
message will be : DTCMxxxxxxxx MUX card upload
aborted for DTC address 08000900357D card 2
ACTION Contact your HP support representative. You can
obtain the additional information by running the
card selftest through the Termdsm.
---------------------------------------------------------------
118 MESSAGE Now you must restart the MUX Card by resetting
DTC address yyyyyyyyyyyy card z (DTCMWARN118)
CAUSE This message indicates that the MUX card is not
working any more after the MUX 68k upload is
completed. Consequently, the user must initiate a
MUX reset to reactivate the MUX card.
ACTION After the MUX card upload is completed, the user
must initiate a MUX card reset by running the host
Termdsm to restart the MUX card.
---------------------------------------------------------------
123 MESSAGE DTCMxxxxxxxx rom code download started for DTC
address yyyyyyyyyyyy (DTCMINFO123)
CAUSE This informational message indicates that a
download operation of the rom code for a DTC
starts. For example : The rom code download
starts on a DTC IEEE802.3 address at 080009280E1C,
the console message will be : DTCMxxxxxxxx rom
code download started for DTC address 080009280E1C
ACTION Wait for the rom code download to complete. The
rom code download completion message will be shown
on the console.
---------------------------------------------------------------
125 MESSAGE DTCMxxxxxxxx rom code download aborted for DTC
address yyyyyyyyyyyy (DTCMERR125)
CAUSE This error message indicates that a download
operation of the rom code was aborted by the DTC. A
problem occured with the DTC while the download of
the rom code was being performed.
For example : The download of the rom code was
aborted on the DTC IEEE802.3 address at
080009280E1C, the console message will be :
DTCMxxxxxxxx rom code download aborted for DTC
address 080009280E1C
ACTION The appropriate message with the corrective action
will be displayed for the error conditions.
---------------------------------------------------------------
126 MESSAGE DTCMxxxxxxxx rom code download completed for DTC
address yyyyyyyyyyyy (DTCMERR126)
CAUSE This informational message indicates that a
download operation of the rom code completes. For
example : The download of the rom code completed
on a DTC IEEE802.3 address at 080009280E1C, the
console message will be : DTCMxxxxxxxx rom code
download completed for DTC address 080009280E1C
ACTION The rom code is downloaded to the DTC without any
problems, no actions need to be taken.
---------------------------------------------------------------