HP 3000 Manuals HP 3000 Manuals
Chapter 62 NLIOUTIL
(NLIO WARN, NLIO ERR)
--------------------------------------------------------------
---------------------------------------------------------------
11 MESSAGE TERMINAL n IS SHUT.
---------------------------------------------------------------
12 MESSAGE PRINTER n IS SHUT.
---------------------------------------------------------------
21 MESSAGE TERMINAL n IS OPENED IN LANGUAGE n.
---------------------------------------------------------------
22 MESSAGE PRINTER n IS OPENED WITH LANGUAGE n.
---------------------------------------------------------------
31 MESSAGE TERMINAL n IS OPENED WITH LANGUAGE n, RECCONV.
---------------------------------------------------------------
32 MESSAGE TERMINAL n IS OPENED WITH LANGUAGE n, NORECCONV.
---------------------------------------------------------------
33 MESSAGE PRINTER n IS OPENED WITH LANGUAGE n, RECCONV.
---------------------------------------------------------------
34 MESSAGE PRINTER n IS OPENED WITH LANGUAGE n, NORECCONV.
---------------------------------------------------------------
35 MESSAGE LATIN MODE, WIDTH = n, SHAPE = n.
---------------------------------------------------------------
36 MESSAGE NONLATIN MODE, WIDTH = n, SHAPE = n.
---------------------------------------------------------------
41 MESSAGE TERMINAL n : LANGUAGE IS SET TO n.
---------------------------------------------------------------
42 MESSAGE PRINTER n : LANGUAGE IS SET TO n.
---------------------------------------------------------------
51 MESSAGE TERMINAL n : RECCONV IS SET.
---------------------------------------------------------------
52 MESSAGE TERMINAL n : NORECCONV IS SET.
---------------------------------------------------------------
61 MESSAGE PRINTER n : RECCONV IS SET.
---------------------------------------------------------------
62 MESSAGE PRINTER n : NORECCONV IS SET.
---------------------------------------------------------------
71 MESSAGE PRINTER n : LATIN MODE IS SET.
---------------------------------------------------------------
72 MESSAGE PRINTER n : NONLATIN MODE IS SET.
---------------------------------------------------------------
81 MESSAGE PRINTER n : WIDTH IS SET TO n.
---------------------------------------------------------------
91 MESSAGE PRINTER n : SHAPE IS SET TO n.
---------------------------------------------------------------
1200 MESSAGE TERMINAL n IS ALREADY OPENED. (NLIO WARN 1200)
---------------------------------------------------------------
1201 MESSAGE PRINTER n IS ALREADY OPENED. (NLIO WARN 1201)
CAUSE You tried to OPEN a device which was already
OPENed.
ACTION Use the SHOW command to check the status. Check
the ldev.
---------------------------------------------------------------
1202 MESSAGE TERMINAL n IS CONTROLLED BY OTHER PROCESS. (NLIO
WARN 1202)
CAUSE Same as message.
ACTION Re-try the same command.
---------------------------------------------------------------
1204 MESSAGE TERMINAL n IS IN USE, SHUT PENDING. (NLIO WARN
1204)
CAUSE Same as message.
ACTION No action required.
---------------------------------------------------------------
1205 MESSAGE PRINTER n IS IN USE, SHUT PENDING. (NLIO WARN
1205)
CAUSE Same as message.
ACTION No action required.
---------------------------------------------------------------
1206 MESSAGE TERMINAL n HAS NOT BEEN OPENED YET. (NLIO WARN
1206)
CAUSE You tried to SHUT a device which was not OPENed.
Or, a device which you SHOWed was not OPENed.
ACTION Check the ldev if necessary
---------------------------------------------------------------
1207 MESSAGE PRINTER n HAS NOT BEEN OPENED YET. (NLIO WARN
1207)
CAUSE You tried to SHUT a device which was not OPENed.
Or, a device which you SHOWed was not OPENed.
ACTION Check the ldev if necessary
---------------------------------------------------------------
1208 MESSAGE NO TERMINAL/PRINTER HAS BEEN OPENED. (NLIO WARN
1208)
CAUSE You tried to SHUT devices, or SHOWed the status
when no device had been OPENed.
ACTION No action is required.
---------------------------------------------------------------
1211 MESSAGE TERMINAL n IS SHUT PENDING. (NLIO WARN 1211)
CAUSE Same as message.
ACTION No action required.
---------------------------------------------------------------
1212 MESSAGE PRINTER n IS SHUT PENDING. (NLIO WARN 1212)
CAUSE Same as message.
ACTION No action required.
---------------------------------------------------------------
1300 MESSAGE "NLIODEF.PUB.SYS" FILE BEING ACCESSED. (NLIO WARN
1300)
CAUSE
ACTION
---------------------------------------------------------------
2100 MESSAGE UNKNOWN COMMAND WAS ENTERED. (NLIO ERR 2100)
CAUSE Command name incorrect.
ACTION Re-enter the command. Use HELP to check the
syntax.
---------------------------------------------------------------
2101 MESSAGE TOO MANY PARAMETERS WERE ENTERED. (NLIO ERR 2101)
CAUSE Same as message.
ACTION Re-enter the command using the correct syntax. Use
HELP to check the syntax.
---------------------------------------------------------------
2102 MESSAGE INVALID DELIMITER WAS ENTERED. (NLIO ERR 2102)
CAUSE The second OPEN delimeter is incorrect.
ACTION Re-enter the command using the correct syntax. Use
HELP to check the syntax.
---------------------------------------------------------------
2110 MESSAGE LDEV CANNOT BE OMITTED FOR NON-INTERACTIVE STDIN.
(NLIO ERR 2110)
CAUSE Same as message.
ACTION Re-enter the command, specifying the ldev.
ACTION
---------------------------------------------------------------
2111 MESSAGE NO DEVICE IS DESIGNATED FOR SPECIFICED DEVICE.
(NLIO ERR 2111)
CAUSE The device or device class specified does not refer
to a configured device.
ACTION Check the system configuration and re-enter the
command, specifying the correct ldev.
---------------------------------------------------------------
2113 MESSAGE SPECIFIED LDEV n IS NOT A TERMINAL OR PRINTER.
(NLIO ERR 2113)
CAUSE The specified ldev was other than a terminal or a
printer.
ACTION Check the system configuration and re-enter the
command, specifying the correct ldev.
---------------------------------------------------------------
2114 MESSAGE SPECIFIED DEVICE CLASS IS NOT A TERMINAL OR
PRINTER. (NLIO ERR 2114)
CAUSE The specified device class does not apply to
terminals or printers.`
ACTION Check the system configuration and re-enter the
command, specifying the correct device class.
---------------------------------------------------------------
2115 MESSAGE INVALID PARAMETER WAS ENTERED. (NLIO ERR 2115)
CAUSE The specified ldev was other than a terminal or a
printer.
ACTION Check the system configuration and re-enter the
command, specifying the correct ldev.
---------------------------------------------------------------
2116 MESSAGE TMUX TERMINAL WAS SPECIFIED. (NLIO ERR 2116)
CAUSE
ACTION
---------------------------------------------------------------
2120 MESSAGE INVALID LANGUAGE WAS ENTERED. (NLIO ERR 2120)
CAUSE The input language ID was not a valid one.
ACTION Check the language ID and re-enter the command,
specifying a correct language ID.
---------------------------------------------------------------
2121 MESSAGE UNKNOWN LANGUAGE WAS ENTERED. (NLIO ERR 2121)
CAUSE Unsupported language ID was entered. as the system
default language.
ACTION Check the language ID and re-enter the command.
---------------------------------------------------------------
2122 MESSAGE INVALID LANGUAGE IS USED. (NLIO ERR 2122)
CAUSE Unsupported language ID was set as the user
interface language set, or as the system default
language.
ACTION Re-enter the command, specifying the correct
language ID.
---------------------------------------------------------------
2123 MESSAGE SPECIFIED LANGUAGE IS NOT CONFIGURED ON THE
SYSTEM. (NLIO ERR 2123)
CAUSE The specified language is not supported on the
system.
ACTION Check and set the valid language, then re-enter the
command.
---------------------------------------------------------------
2130 MESSAGE INVALID WIDTH PARAMETER WAS ENTERED. (NLIO ERR
2130)
ACTION
---------------------------------------------------------------
2131 MESSAGE INVALID WIDTH VALUE WAS ENTERED. (NLIO ERR 2131)
ACTION
---------------------------------------------------------------
2140 MESSAGE INVALID SHAPE PARAMETER WAS ENTERED. (NLIO ERR
2140)
ACTION
---------------------------------------------------------------
2141 MESSAGE INVALID SHAPE VALUE WAS ENTERD. (NLIO ERR 2141)
ACTION
---------------------------------------------------------------
2150 MESSAGE UNKNOWN COMMAND FOR HELP. (NLIO ERR 2150)
CAUSE You entered a command that HELP does not recognize.
ACTION Check the valid command names by entering the HELP
command without any parameters. Then re-enter the
HELP command using the correct parameter.
---------------------------------------------------------------
2160 MESSAGE BOTH RECCONV AND NORECCONV PARAMETER WERE
ENTERED. (NLIO ERR 2160)
---------------------------------------------------------------
2161 MESSAGE BOTH LATIN AND NONLATIN PARAMETER WERE ENTERED.
(NLIO ERR 2161)
---------------------------------------------------------------
2162 MESSAGE REDUNDANT RECCONV PARAMETER. (NLIO ERR 2162)
---------------------------------------------------------------
2163 MESSAGE REDUNDANT NORECCONV PARAMETER. (NLIO ERR 2163)
---------------------------------------------------------------
2164 MESSAGE REDUNDANT LATIN PARAMETER. (NLIO ERR 2164)
---------------------------------------------------------------
2165 MESSAGE REDUNDANT NONLATIN PARAMETER. (NLIO ERR 2165)
---------------------------------------------------------------
2166 MESSAGE REDUNDANT WIDTH PARAMETER. (NLIO ERR 2166)
---------------------------------------------------------------
2167 MESSAGE REDUNDANT SHAPE PARAMETER. (NLIO ERR 2167)
---------------------------------------------------------------
2170 MESSAGE LANGUAGE WAS NOT ASIAN LANGUAGE. (NLIO ERR 2170)
---------------------------------------------------------------
2171 MESSAGE LANGUAGE WAS NOT MEA LANGUAGE. (NLIO ERR 2171)
---------------------------------------------------------------
2180 MESSAGE TERMINAL CANNOT BE OPENED WITH MEA LANGUAGE.
(NLIO ERR 2180)
---------------------------------------------------------------
2201 MESSAGE OP CAPABILITY IS REQUIRED. (NLIO ERR 2201) OP
capability is required to specify an STDIN other
than your own. You currently do not have OP
capability. Check the ldev, or contact your System
Manager to extend your capabilities.
---------------------------------------------------------------
2300 MESSAGE MISSING MESSAGE CATALOG FILE = NLIOCAT.PUB.SYS.
(NLIO ERR 2300) The message catalog for the
NLIOUTIL program is missing. Contact your System
Manager to locate the message catalog.
---------------------------------------------------------------
2301 MESSAGE MISSING "NLIODEF.PUB.SYS FILE". (NLIO ERR 2301)
---------------------------------------------------------------