HP 3000 Manuals HP 3000 Manuals
(CIERR) (contd)
736 MESSAGE EXPECTED COMMA AFTER ACCOUNT NAME, BEFORE
MANAGER'S NAME. (CIERR 736)
CAUSE You failed to include a comma between the account
name and the manager's name.
ACTION Include a comma between the account name and the
manager's name.
---------------------------------------------------------------
737 MESSAGE EXPECTED KEYWORD IDENTIFYING PARAMETER. ONE OF
PASS, FILES, CPU, CONNECT, CAP, ACCESS, MAXPRI,
LOCATTR, VS, HOME, USERPASS. (CIERR 737)
CAUSE The command that you issued expected to see one of
the parameters listed above. You specified a
parameter that the command does not recognize.
ACTION Delete the parameter that is not specified in the
list of accepted command parameters.
---------------------------------------------------------------
738 MESSAGE THE SYNTAX REQUIRES THAT AN EQUAL SIGN (=) FOLLOW
KEYWORD. (CIERR 738)
CAUSE You did not include an equal sign (=) following one
of the keywords on the command line.
ACTION Find the keyword that is not followed by an equal
sign (=) and enter the equal sign (=).
---------------------------------------------------------------
739 MESSAGE EXPECTED ONE OF PASS, FILES, CPU, CONNECT, CAP,
ACCESS, MAXPRI, LOCATTR, VS, HOME. (CIERR 739)
CAUSE The command that you issued expected to see one of
the parameters listed above. You specified a
parameter that the command does not recognize.
ACTION Delete the parameter that is not specified in the
list of accepted command parameters.
---------------------------------------------------------------
740 MESSAGE UNIDENTIFIABLE PARAMETER. POSSIBLY A DELIMITER
WAS OMITTED. (CIERR 740)
CAUSE The command that you issued does not recognize one
of the parameters. It might be that you did not
include a delimiter (semi-colon, comma, period, or
space) between parameters.
ACTION Check the MPE/iX Commands Reference Manual,
(32650-90003) to make sure that you did not omit a
delimiter. If you did, fill the delimiter in.
---------------------------------------------------------------
741 MESSAGE ACCESS INAPPROPRIATE FOR USER. (CIERR 741)
CAUSE One of the access modes that you specified on the
command line is not allowed for users.
ACTION Check the allowable access modes in the MPE/iX
Commands Reference Manual (32650-90003) and change
the command.
---------------------------------------------------------------
742 MESSAGE ACCESS REDUNDANTLY SPECIFIED. LAST OCCURRENCE
USED. (CIERR 742)
CAUSE One of the access modes that you specified on the
command line was repeated. The last occurrence of
the access mode is the one that will be used.
ACTION This message is informational only.
---------------------------------------------------------------
743 MESSAGE EXPECTED ONE OF AS, BS, CS, DS, OR ES. (CIERR
743)
CAUSE You did not specify an acceptable priority.
ACTION Specify an acceptable priority level.
---------------------------------------------------------------
744 MESSAGE MAXPRI REDUNDANTLY SPECIFIED. LAST OCCURRENCE
USED. (CIERR 744)
CAUSE You specified the MAXPRI parameter twice on the
same command line. The last MAXPRI value that was
specified is the one implemented by the command.
ACTION This message is informational only.
---------------------------------------------------------------
745 MESSAGE MAXPRI INAPPROPRIATE FOR GROUPS. IGNORED. (CIERR
745)
CAUSE The MAXPRI parameter cannot be specified for
groups. It was ignored.
ACTION This message is informational only.
---------------------------------------------------------------
746 MESSAGE CAPABILITY LIST REDUNDANTLY SPECIFIED. LAST
OCCURRENCE USED. (CIERR 746)
CAUSE You specified the CAP parameter twice on the same
command line. The last CAP list that was specified
is the one implemented by the command.
ACTION This message is informational only.
---------------------------------------------------------------
747 MESSAGE NO CAPABILITY SPECIFIED. IGNORED. (CIERR 747)
CAUSE You did not specify any capabilities in your
capability list.
ACTION This message is informational only.
---------------------------------------------------------------
748 MESSAGE EXPECTED ONE OF SM, AM, AL, GL, DI, 0P, PH, DS,
MR, PM, IA, BA, CS, ND, SF, UV, CV, LG, NA, NM, PS.
(CIERR 748)
CAUSE You did not specify an acceptable capability.
ACTION See the MPE/iX Commands Reference Manual,
(32650-90003) for a definition of acceptable
capabilities.
---------------------------------------------------------------
749 MESSAGE THIS CAPABILITY INAPPROPRIATE FOR GROUPS.
IGNORED. (CIERR 749)
CAUSE One of the capabilities in your capability list
cannot be specified for groups. It was ignored.
ACTION This message is informational only.
---------------------------------------------------------------
750 MESSAGE THIS CAPABILITY REDUNDANTLY SPECIFIED. IGNORED.
(CIERR 750)
CAUSE You specified a capability twice in the capability
list. There should be a caret character (^)
pointing to the repeated capability.
ACTION This message is informational only.
---------------------------------------------------------------
751 MESSAGE CREATOR SPECIFIED NEITHER IA NOR BA FOR ACCOUNT,
SO BOTH WERE IMPOSED. (CIERR 751)
CAUSE You did not specify either interactive access (IA)
or batch access (BA) for the account. These must
be specified.
ACTION This message is informational only.
---------------------------------------------------------------
752 MESSAGE CREATOR SPECIFIED NEITHER IA NOR BA FOR USER, SO
BOTH WERE IMPOSED. (CIERR 752)
CAUSE You did not specify either interactive access (IA)
or batch access (BA) for the user. These must be
specified.
ACTION This message is informational only.
---------------------------------------------------------------
753 MESSAGE LOCAL ATTRIBUTE INAPPROPRIATE FOR GROUPS.
IGNORED. (CIERR 753)
CAUSE The LOCAL attribute cannot be specified for groups.
The attribute was ignored.
ACTION This message is informational only.
---------------------------------------------------------------
754 MESSAGE ACCOUNT MANAGER NAME MUST BE SPECIFIED IN
NEWACCT. (CIERR 754)
CAUSE You neglected to specify the name of the account
manager. The NEWACCT command requires the name of
the account manager.
ACTION Specify the name of the account manager.
---------------------------------------------------------------
755 MESSAGE MANAGER NAME MUST START WITH ALPHABETIC
CHARACTER. (CIERR 755)
CAUSE The first character of the manager name is not
alphabetic. You probably mistyped the command.
ACTION Retype the command.
---------------------------------------------------------------
756 MESSAGE MANAGER NAME CANNOT BE MORE THAN 8 CHARACTERS
LONG. (CIERR 756)
CAUSE The name of the manager is too long. Eight
characters or less is the limit. You probably
mistyped the command.
ACTION Retype the command.
---------------------------------------------------------------
758 MESSAGE EMBEDDED SPECIAL CHARACTER IN MANAGER'S NAME.
(CIERR 758)
CAUSE You may have typed a control or unprintable
character as part of the manager's name.
ACTION Re-enter the command. Make sure that you do not
type any control characters.
---------------------------------------------------------------
760 MESSAGE PASSWORD MUST START WITH ALPHABETIC CHARACTER.
(CIERR 760)
CAUSE The password specified does not start with an
alphabetic character.
ACTION Re-enter the command and supply a valid password.
---------------------------------------------------------------
761 MESSAGE PASSWORD REDUNDANTLY SPECIFIED. LAST OCCURRENCE
USED. (CIERR 761)
CAUSE You specified a password twice on the command line.
The last occurrence of the password specification
is the one implemented.
ACTION This message is informational only.
---------------------------------------------------------------
762 MESSAGE PASSWORD CANNOT BE MORE THAN 8 CHARACTERS LONG.
(CIERR 762)
CAUSE You specified a password that has more than eight
characters. A password can only be eight
characters or less. You probably mistyped the
command.
ACTION Retype the command.
---------------------------------------------------------------
764 MESSAGE EMBEDDED NON-ALPHANUMERIC CHARACTER IN PASSWORD.
(CIERR 764)
CAUSE You specified a password with a character that is
neither alphabetic nor numeric. You probably
mistyped the command.
ACTION Retype the command.
---------------------------------------------------------------
765 MESSAGE HOME GROUP OPTION APPROPRIATE ONLY TO USERS.
IGNORED. (CIERR 765)
CAUSE You specified the home group option for an account
or a group. It may only be specified for users.
ACTION This message is informational only.
---------------------------------------------------------------
767 MESSAGE FILES OPTION INAPPROPRIATE FOR USERS. IGNORED.
(CIERR 767)
CAUSE You cannot specify the FILES option for a user.
ACTION This message is informational only.
---------------------------------------------------------------
768 MESSAGE EXPECTED POSITIVE INTEGER <2147483647 AS SECTORS
LIMIT. (CIERR 768)
CAUSE You specified a sectors limit with the FILES option
that is greater than 2147483647.
ACTION Specify a new sectors limit that is less than
2147483647.
---------------------------------------------------------------
769 MESSAGE FILE SECTORS LIMIT MAY NOT BE A NEGATIVE NUMBER.
(CIERR 769)
CAUSE You specified a negative number for the file sector
limit. It must be a positive number.
ACTION Specify a new sectors limit with a positive number.
---------------------------------------------------------------
770 MESSAGE FILE SECTORS LIMIT REDUNDANTLY SPECIFIED. LAST
USED. (CIERR 770)
CAUSE You specified the file sector limit twice on the
same command line. The last file sector limit
specification is the one implemented.
ACTION This message is informational only.
---------------------------------------------------------------
771 MESSAGE ONVS OPTION INAPPROPRIATE FOR USERS. IGNORED.
(CIERR 771)
CAUSE You cannot specify the ONVS option for a user. It
was ignored.
ACTION This message is informational only.
---------------------------------------------------------------
773 MESSAGE CPU LIMITS OPTION INAPPROPRIATE FOR USERS.
IGNORED. (CIERR 773)
CAUSE You cannot specify the CPU limit option for a user.
It was ignored.
ACTION This message is informational only.
---------------------------------------------------------------
774 MESSAGE EXPECTED POSITIVE INTEGER <2147483647 AS CPU
SECONDS LIMIT. (CIERR 774)
CAUSE You specified a CPU limit that is greater than
2147483647.
ACTION Specify a new CPU limit that is less than
2147483647.
---------------------------------------------------------------
775 MESSAGE CPU SECONDS LIMIT MAY NOT BE A NEGATIVE NUMBER.
(CIERR 775)
CAUSE You specified a negative number for the CPU seconds
limit. Only a positive number is allowed
ACTION This message is informational only.
---------------------------------------------------------------
776 MESSAGE CPU SECONDS LIMIT REDUNDANTLY SPECIFIED. LAST
USED. (CIERR 776)
CAUSE You specified a CPU seconds limit more than once on
the same command line. The last CPU seconds limit
specification is the one implemented.
ACTION This message is informational only.
---------------------------------------------------------------
777 MESSAGE ONE OR MORE USERS HAVE NEITHER "IA" OR "BA"
CAPABILITY. (CIWARN 777).
---------------------------------------------------------------
778 MESSAGE ONE OR MORE GROUPS HAVE NEITHER "IA" OR "BA"
CAPABILITY. (CIWARN 778).
---------------------------------------------------------------
779 MESSAGE CONNECT TIME OPTION INAPPROPRIATE FOR USERS.
IGNORED. (CIERR 779)
CAUSE You cannot specify the connect time option for a
user. It was ignored.
ACTION This message is informational only.
---------------------------------------------------------------
781 MESSAGE CONNECT TIME LIMIT MAY NOT BE A NEGATIVE NUMBER.
(CIERR 781)
CAUSE You specified a negative number for the connect
time limit option. Only a positive number is
allowed.
ACTION Specify a new connect time limit that is a positive
number.
---------------------------------------------------------------
782 MESSAGE CONNECT TIME LIMIT REDUNDANTLY SPECIFIED. LAST
USED. (CIERR 782)
CAUSE You specified a connect time limit more than once
on the same command line. The last connect time
limit specification is the one implemented.
ACTION This message is informational only.
---------------------------------------------------------------
784 MESSAGE SM CAPABILITY CANNOT BE REMOVED FROM MANAGER.SYS.
COMMAND REJECTED. (CIERR 784)
CAUSE You cannot remove system manager (SM) capability
from MANAGER.SYS.
ACTION Review account structure capabilities in the MPE/iX
Commands Reference Manual, (32650-90003).
---------------------------------------------------------------
785 MESSAGE ATTEMPT TO REMOVE SM CAPABILITY FROM SYS ACCOUNT
OVERRIDDEN. (CIERR 785)
CAUSE You cannot remove system manager (SM) capability
from the SYS account.
ACTION Review account structure capabilities in this
manual.
---------------------------------------------------------------
786 MESSAGE FILE SPACE LIMIT REQUESTED LESS THAN ACTUAL SPACE
ALREADY IN USE. COMMAND REJECTED WITH NO CHANGES.
(CIERR 786)
CAUSE You have requested a file space limit that is less
than the space that is already in use.
ACTION This message is informational only.
---------------------------------------------------------------
787 MESSAGE GROUP CPU LIMIT REQUESTED EXCEEDS ACCOUNT LIMIT,
GROUP LIMIT LOWERED TO ACCOUNT LIMIT. (CIERR 787)
CAUSE The group CPU limit cannot exceed the account CPU
limit.
ACTION The group CPU limit that you specified has
automatically been lowered to the account CPU
limit.
---------------------------------------------------------------
788 MESSAGE GROUP CONNECT TIME LIMIT REQUESTED EXCEEDS
ACCOUNT LIMIT. GROUP LIMIT LOWERED TO ACCOUNT
LIMIT. (CIERR 788)
CAUSE The group connect time limit cannot exceed the
account connect time limit.
ACTION The group connect time limit that you specified has
automatically been lowered to the account connect
time limit.
---------------------------------------------------------------
789 MESSAGE GROUP FILE SPACE LIMIT REQUESTED EXCEEDS ACCOUNT
LIMIT, GROUP LIMIT LOWERED TO ACCOUNT LIMIT. (CIERR
789)
CAUSE You have requested a group file space limit that
exceeds the account file space limit.
ACTION The group file space limit has automatically been
lowered to the account file space limit.
---------------------------------------------------------------
790 MESSAGE GROUP CAPABILITIES REQUESTED EXCEED ACCOUNT
CAPABILITIES. ! NOT GRANTED (CIERR 790)
CAUSE The group capabilities cannot exceed the account
capabilities.
ACTION This message is informational only.
---------------------------------------------------------------
791 MESSAGE GROUP FILE SPACE LIMIT REQUESTED IS LESS THAN
SPACE ALREADY IN USE. COMMAND REJECTED. (CIERR 791)
CAUSE You have requested a group file space limit that is
less than the space that is already in use.
ACTION This message is informational only.
---------------------------------------------------------------