HP 3000 Manuals HP 3000 Manuals
(CIERR) (contd.)
666 MESSAGE UNABLE TO LOAD HP BUSINESS BASIC SUBSYSTEM.
(CIERR 666)
---------------------------------------------------------------
667 MESSAGE HP BUSINESS BASIC REQUIRED PARAMETER MISSING.
(CIERR 667)
CAUSE A parameter required by HP BUSINESS BASIC was not
specified as part of the command line.
ACTION Re-enter the command and supply the required
parameter.
---------------------------------------------------------------
679 MESSAGE PRIORITY REQUESTED EXCEEDS MAXIMUM USER PRIORITY.
MAXIMUM USER PRIORITY USED. (CIWARN 679)
---------------------------------------------------------------
680 MESSAGE STDIN MUST BE FILENAME OR *BACKREFERENCE OR
$NULL. (CIERR 680)
---------------------------------------------------------------
681 MESSAGE STDLIST MUST BE FILENAME OR FILENAME,NEW OR
*BACKREFERENCE OR $NULL. (CIERR 681)
---------------------------------------------------------------
682 MESSAGE EXPECTED ' OR " TO START STRING. (CIERR 682)
CAUSE ' or " were not used to start a string.
ACTION Re-enter the command and start the string with ' or
". Remember to terminate the string with a
matching delimiter.
---------------------------------------------------------------
683 MESSAGE EXPECTED BALANCING ' OR " TO TERMINATE STRING.
(CIERR 683)
CAUSE The strings are ended with a matching ' or ". If
the string was started using ', it should be ended
with '. If the string was started using ", is
should be terminated with ".
ACTION Re-enter the command and use matching pairs of
delimiters.
---------------------------------------------------------------
684 MESSAGE COULDN'T OPEN SPECIFIED $STDIN FOR PROGRAM.
(CIERR 684)
CAUSE The file specified as STDIN does not exist.
ACTION Verify that the file exists or its name was entered
correctly. Then re-enter the command.
---------------------------------------------------------------
685 MESSAGE COULDN'T OPEN SPECIFIED $STDLIST FOR PROGRAM.
(CIERR 685)
CAUSE The file specified as STDLIST does not exist.
ACTION Verify that the file exists or its name was entered
correctly. Then re-enter the command.
---------------------------------------------------------------
686 MESSAGE CREATEPROCESS ERROR !. (CIERR 686)
---------------------------------------------------------------
687 MESSAGE EXPECTED SEMICOLON OR CARRIAGE RETURN. (CIERR
687)
CAUSE An ASCII code other than semicolon or carriage
return was specified.
ACTION Re-enter the command.
---------------------------------------------------------------
688 MESSAGE INFO STRING MUST NOT EXCEED 255 CHARACTERS
INCLUDING DELIMITING QUOTES. (CIERR 688)
CAUSE The info string contains more than 255 characters.
ACTION Escape codes and control characters are valid
characters. Re-enter the command and make sure
that the total number of visible, invisible, and
delimiting quotes is not more than 255 characters.
---------------------------------------------------------------
689 MESSAGE THE ONLY SYSTEM DEFINED FILE ALLOWED IS $OLDPASS
(CIERR 689)
CAUSE A system defined file other than $OLDPASS was
specified.
ACTION Re-enter the command and specify $OLDPASS as the
system defined file name.
---------------------------------------------------------------
690 MESSAGE USER SPECIFIED NEITHER IA NOR BA; ! IMPOSED.
(CIWARN 690)
ACTION Verify that the assigned capabilities are
appropriate. Re-enter the command if they are not.
---------------------------------------------------------------
691 MESSAGE USER MAY NOT SPECIFY BOTH FPMAP AND NOFPMAP IN
PREP (CIERR 691)
CAUSE Both FPMAP and NOFPMAP were specified.
ACTION These parameters have exactly opposite meanings.
Re-enter the command and specify the appropriate
parameter.
---------------------------------------------------------------
692 MESSAGE UNKNOWN MODE VALUE - EXPECTED EMULATE, FASTEM, OR
TRANS. (CIERR 692)
---------------------------------------------------------------
693 MESSAGE A MODE VALUE (EMULATE, FASTEM, OR TRANS) MUST BE
SUPPLIED. (CIERR 693)
---------------------------------------------------------------
694 MESSAGE THE LIBLIST VALUE CANNOT EXCEED 130 CHARACTERS.
(CIERR 694)
---------------------------------------------------------------
695 MESSAGE THE UNSAT PROCEDURE NAME CANNOT EXCEED 31
CHARACTERS. (CIERR 695)
CAUSE The procedure name supplied with the UNSAT
parameter of the LINK or RUN commands.
ACTION Re-enter the command and supply a procedure name
that is up to 31 characters long.
---------------------------------------------------------------
696 MESSAGE ALL LINEAR PRI VALUES REQUIRE PM CAPABILITY.
(CIERR 696)
---------------------------------------------------------------
697 MESSAGE INVALID PRI VALUE - EXPECTED BS,CS,DS,ES OR A
NUMBER IN THE RANGE OF 100 THROUGH 255. (CIERR 697)
CAUSE The priority specified is not valid.
ACTION If you entered a number, it should be within the
range specified. If not, verify that the priority
specified was entered correctly.
---------------------------------------------------------------
698 MESSAGE INVALID NMHEAP VALUE - EXPECTED AN INTEGER VALUE.
(CIERR 698)
CAUSE The value supplied is not an integer value.
ACTION Verify that the value specified is composed of
digits only. Re-enter the command and supply an
integer value.
---------------------------------------------------------------
699 MESSAGE INVALID NMSTACK VALUE - EXPECTED AN INTEGER
VALUE. (CIERR 699)
CAUSE The value supplied is not an integer value.
ACTION Verify that the value specified is composed of
digits only. Re-enter the command and supply an
integer value.
---------------------------------------------------------------
700 MESSAGE EXPECTED JUST "@", IMPLYING ALL ACCOUNTS.
(CIERR 700)
CAUSE The commands expected the pattern matching
character "@" only.
ACTION Re-enter the command and supply only "@".
---------------------------------------------------------------
701 MESSAGE EXPECTED "CPU" OR "CONNECT". (CIERR 701)
CAUSE A parameter name other than CPU and CONNECT was
specified.
ACTION Re-enter the command and specify either of these
parameters.
---------------------------------------------------------------
702 MESSAGE RESETACCT HAS ONLY 2 PARAMETERS. (CIERR 702)
CAUSE More than two parameters were passed to the
command.
ACTION Re-enter the command and supply a maximum of two
parameters.
---------------------------------------------------------------
705 MESSAGE REPORT ON ENTIRE ACCOUNT REQUIRES ACCOUNT
MANAGER CAPABILITY. (CIERR 705)
CAUSE The user does not have Account Manager (AM)
capability which is required to execute this
command.
ACTION Consult with your system manager.
---------------------------------------------------------------
706 MESSAGE REPORT ON GROUP OTHER THAN LOGON REQUIRES
ACCOUNT MANAGER CAPABILITY. (CIERR 706)
CAUSE The user does not have Account Manager (AM)
capability which is required to execute this
command.
ACTION Consult with your system manager.
---------------------------------------------------------------
707 MESSAGE REPORT ON ALL ACCOUNTS REQUIRES SYSTEM MANAGER
CAPABILITY. (CIERR 707)
CAUSE The user does not have system manager (SM)
capability which is required to execute this
command.
ACTION Consult with your system manager.
---------------------------------------------------------------
708 MESSAGE REPORT ON ACCOUNT OTHER THAN LOGON REQUIRES
SYSTEM MANAGER CAPABILITY. (CIERR 708)
CAUSE The user does not have system manager (SM)
capability which is required to execute this
command.
ACTION Consult with your system manager.
---------------------------------------------------------------
709 MESSAGE EXPECTED A LIST FILE NAME. (CIERR 709)
CAUSE Evidently, you did not supply file name to which
the output of the command would be sent.
ACTION Re-enter the command and supply a file name.
---------------------------------------------------------------
710 MESSAGE REPORT HAS ONLY TWO PARAMETERS. (CIERR 710)
CAUSE More than two parameters were supplied to the
command.
ACTION Re-enter the command and supply at most two
parameters.
---------------------------------------------------------------
711 MESSAGE EXTRANEOUS CHARACTERS IN GROUP NAME. (CIERR 711)
CAUSE Group names must be constructed using alphanumeric
characters. Evidently, there are non-alphanumeric
characters in the group name.
ACTION Re-enter the command and supply a completely
alphanumeric group name.
---------------------------------------------------------------
715 MESSAGE EXPECTED JUST THE GROUP NAME. (CIERR 715)
CAUSE More than just a group name was supplied to the
system.
ACTION Re-enter the command and supply only a group name.
---------------------------------------------------------------
716 MESSAGE EXPECTED JUST THE ACCOUNT NAME. (CIERR 716)
CAUSE More than just an account name was supplied to the
system.
ACTION Re-enter the command and supply only an account
name.
---------------------------------------------------------------
717 MESSAGE EXPECTED JUST THE USER NAME. (CIERR 717)
CAUSE More than just a user name was supplied to the
system.
ACTION Re-enter the command and supply only a user name.
---------------------------------------------------------------
718 MESSAGE EXPECTED JUST THE VSET NAME. (CIERR 718)
CAUSE More than just a Volume Set Definition (VSET) name
was supplied to the system.
ACTION Re-enter the command and supply only a VSET name.
---------------------------------------------------------------
719 MESSAGE THE ONLY PARAMETERS RECOGNIZED ARE: [ACCOUNT OR
GROUP], [LISTFILE], [PASS], [ONVS], [HOMEVS].
(CIERR 719)
CAUSE You supplied a parameter that is not recognized.
ACTION Re-enter the command and supply the appropriate
parameter(s).
---------------------------------------------------------------
720 MESSAGE THE "PASS" OPTION REQUIRES AM OR SM CAPABILITIES.
(CIWARN 720)
CAUSE The logon user does not have the appropriate
capability to view the password.
ACTION No action is required.
---------------------------------------------------------------
721 MESSAGE EXECUTING THIS COMMAND ON ALL USERS REQUIRES AM
CAPABILITY. (CIERR 721)
CAUSE Account Manager (AM) capability is required to
execute this command; evidently your logon does not
have this capability.
ACTION If you need this information log on with a user
name that has AM capability and re-enter the
command. If you are not assigned a user name with
AM capability, consult with your account manager.
---------------------------------------------------------------
722 MESSAGE EXECUTING THIS COMMAND ON ANY USER OTHER THAN THE
LOGON USER REQUIRES AM CAPABILITY. (CIERR 722)
CAUSE Account Manager (AM) capability is required to
execute this command; evidently your logon does not
have this capability.
ACTION If you need this information log on with a user
name that has AM capability and re-enter the
command. If you are not assigned a user name with
AM capability, consult with your account manager.
---------------------------------------------------------------
723 MESSAGE UNIDENTIFIABLE NAME. (CIERR 723)
---------------------------------------------------------------
724 MESSAGE EXECUTING THIS COMMAND ON ALL ACCOUNTS REQUIRES
SYSTEM MANAGER CAPABILITY. (CIERR 724)
CAUSE System manager (SM) capability is required to
execute this command; evidently your logon does not
have this capability.
ACTION If you need this information, logon with with a
user name that has SM capability and re-enter the
command. If you are not assigned a user name with
SM capability, consult with your system manager.
---------------------------------------------------------------
725 MESSAGE EXECUTING THIS COMMAND ON ANY ACCOUNT OTHER THAN
THE LOGON ACCOUNT REQUIRES SYSTEM MANAGER
CAPABILITY. (CIERR 725)
CAUSE System manager (SM) capability is required to
execute this command. Your logon does not have
this capability.
ACTION If you need this information logon with with a user
name that has SM capability and re-enter the
command. If you are not assigned a user name with
SM capability, consult with your system manager.
---------------------------------------------------------------
726 MESSAGE EXPECTED A LIST FILE NAME. (CIERR 726)
---------------------------------------------------------------
727 MESSAGE ONLY TWO PARAMETERS ALLOWED, THE ITEM TO BE
LISTED AND THE OPTIONAL LISTFILE. (CIERR 727)
---------------------------------------------------------------
728 MESSAGE EXECUTING THIS COMMAND ON ALL GROUPS REQUIRES AM
CAPABILITY. (CIERR 728)
CAUSE Account Manager (AM) capability is required to
execute this command. Your logon does not have
this capability.
ACTION If you need this information log on with a user
name that has AM capability and re-enter the
command. If you are not assigned a user name with
AM capability, consult with your account manager.
---------------------------------------------------------------
729 MESSAGE EXECUTING THIS COMMAND ON ANY GROUP OTHER THAN
THE LOGON GROUP REQUIRES AM CAPABILITY. (CIERR 729)
CAUSE Account Manager (AM) capability is required to
execute this command; evidently your logon does not
have this capability.
ACTION If you need this information log on with a user
name that has AM capability and re-enter the
command. If you are not assigned a user name with
AM capability, consult with your account manager.
---------------------------------------------------------------
730 MESSAGE ALTACCT CAN HANDLE A MAXIMUM OF 71 PARAMETERS.
(CIERR 730)
CAUSE You have specified too many parameters on the
command line.
ACTION Consult the MPE/iX Commands Reference Manual
(32650-90003) for acceptable parameters.
---------------------------------------------------------------
731 MESSAGE ALTGROUP CAN HANDLE A MAXIMUM OF 71 PARAMETERS.
(CIERR 731)
CAUSE You have specified too many parameters on the
command line.
ACTION Consult the MPE/iX Commands Reference Manual
(32650-90003) for acceptable parameters.
---------------------------------------------------------------
732 MESSAGE ALTUSER CAN HANDLE A MAXIMUM OF 71 PARAMETERS.
(CIERR 732)
CAUSE You have specified too many parameters on the
command line.
ACTION Consult the MPE/iX Commands Reference Manual
(32650-90003) for acceptable parameters.
---------------------------------------------------------------
733 MESSAGE NEWACCT CAN HANDLE A MAXIMUM OF 71 PARAMETERS.
(CIERR 733)
CAUSE You have specified too many parameters on the
command line.
ACTION Consult the MPE/iX Commands Reference Manual
(32650-90003) for acceptable parameters.
---------------------------------------------------------------
734 MESSAGE NEWGROUP CAN HANDLE A MAXIMUM OF 71 PARAMETERS.
(CIERR 734)
CAUSE You have specified too many parameters on the
command line.
ACTION Consult the MPE/iX Commands Reference Manual
(32650-90003) for acceptable parameters.
---------------------------------------------------------------
735 MESSAGE NEWUSER CAN HANDLE A MAXIMUM OF 71 PARAMETERS.
(CIERR 735)
CAUSE You have specified too many parameters on the
command line.
ACTION Consult the MPE/iX Commands Reference Manual
(32650-90003) for acceptable parameters.
---------------------------------------------------------------