HP 3000 Manuals

System Administrator's Quick Reference Guide

6.  Shutting Down and Restarting the System 

After you copy the default configuration group to CONFIG:

   1.  Press:

            CTRL A 

       and at the = prompt, enter:

            =SHUTDOWN 

       A series of shutdown messages is displayed.  The last message is

            SHUTDOWN OF OPERATING SYSTEM COMPLETE. (SHUT 6).

   2.  Reset the system from the system console by entering:

            CTRL B 

   3.  At the CM> prompt, enter:

            CM>RS 

       Ignore any prompts and let the system boot from the system disk
       (primary boot path).

   4.  At the end of the boot activity, when the ISL> prompt is
       displayed, enter:

            ISL>START NORECOVERY 

       This restarts the system from the system disk, using the
       configuration files now contained in the CONFIG group.  CONFIG is
       the default group used anytime the system is restarted.  You may
       ignore any error messages you see during this procedure.

   5.  At the date and time prompt, enter the date and time only if it is
       incorrect, otherwise press Return.

   6.  When the MPE XL: prompt is displayed, enter:

            MPE XL:HELLO MANAGER.SYS;HIPRI 

       At the command interpreter prompt (it may be a colon or it may
       change depending on your system), enter:

            :STREAMS 10 

            :STARTSPOOL LP 

MPE/iX 5.0 Documentation