HP 3000 Manuals HP 3000 Manuals
TermDSM Commands
Troubleshooting tasks are accomplished through a set of commands. Each
command and its basic functionality is as follows:
* C[OMMENT] is used to type informational comments for reference later.
The security level of this command is 2.
* DI[AG] allows several diagnostic functions to be run on a port. It
is also used to initiate a DTC selftest. The security level of this
command is 1 for the DTC selftest and 2 for the individual port
tests.
* DT[C] lists each DTC associated with the system along with its
descriptive name and the IEEE 802.3 station address. The security
level of this command is 2.
* DU[MP] allows the data area of a port to be copied to a disc file for
troubleshooting use by HP factory personnel. The security level of
this command is 2. The data area of an entire DTC can also be copied
to a disc file, and the security level of this command is 1.
* EXI[T] allows the user to exit the TermDSM program and return to the
DUI prompt. The security level of this command is 2.
* H[ELP] displays information regarding TermDSM and its commands. The
security level of this command is 2.
* R[ESET] allows a single port, several ports, or a DTC to accept new
sessions. The security level of resetting one or several ports is 2,
and the security level of resetting an entire DTC is 1.
* ST[ATUS] lists the node name of a specific device's DTC, whether the
port has a session running on it, and whether the device is connected
to an interface card capable of modem connections. The security
level of this command is 2.
Further explanation for each command is contained in chapter 4,
"TermDSM Commands."