HP 3000 Manuals HP 3000 Manuals
Library Procedure Error Messages (Cont.)
Library Procedure Calling Errors (Cont.)
[REV BEG]
-308 MESSAGE ERROR RELATED TO BEGINNING OF FILE.
MEANING An internal error encountered while trying to
obtain the beginning of file information.
ACTION Notify your HP personnel.
----------------------------------------------------------------- [REV
END][REV BEG]
-309 MESSAGE BUFFER IO NOT YET COMPLETE.
MEANING An internal error encountered while performing
internal buffer I/O of the data set.
ACTION Notify your HP personnel.
----------------------------------------------------------------- [REV
END]
[REV BEG]
-310 MESSAGE ERROR RELATED TO END OF FILE.
MEANING An internal error encountered while obtaining the
end of file information.
ACTION Notify your HP personnel.
----------------------------------------------------------------- [REV
END]
[REV BEG]
-312 MESSAGE INTERNAL ERROR ENCOUNTERED WHILE READING DATABASE
BLOCK.
MEANING An internal error encountered while reading the
data set file.
ACTION Notify your HP personnel.
----------------------------------------------------------------- [REV
END]
[REV BEG]
-314 MESSAGE ERROR WHILE OBTAINING PATH INFORMATION FOR SET.
MEANING An internal error encountered while obtaining the
path information for the set.
ACTION Notify your HP personnel.
----------------------------------------------------------------- [REV
END]
[REV BEG]
-322 MESSAGE INTERNAL TURBOIMAGE ERROR RETURNED nn
MEANING TurboIMAGE internal procedure which processed the
item list encountered an unexpected error.
ACTION Notify HP support personnel.
----------------------------------------------------------------- [REV
END]
[REV BEG]
-323 MESSAGE UNEXPECTED EMPTY RECORD FOUND.
MEANING An unexpected empty record found when expecting a
data record.
ACTION Notify your HP personnel.
----------------------------------------------------------------- [REV
END]
[REV BEG]
-331 MESSAGE DSET CAPACITY INFORMATION NOT CURRENT.
MEANING The data set capacity information appears to be
incorrect in the user label of the file.
ACTION Notify your HP personnel.
----------------------------------------------------------------- [REV
END]
[REV BEG]
-332 MESSAGE ERROR IN QLOCK OPERATION.
MEANING An internal error encountered while reading from or
writing to the QLOCK Table.
ACTION Notify your HP personnel.
----------------------------------------------------------------- [REV
END]
[REV BEG]
-333 MESSAGE ERROR IN QOPEN OPERATION.
MEANING An internal error encountered while reading from or
writing to the QOPEN Table.
ACTION Notify your HP personnel.
----------------------------------------------------------------- [REV
END]
[REV BEG]
-420 MESSAGE FEATURE NOT IMPLEMENTED.
MEANING Use of a feature not supported for B-Tree indices
is detected.
ACTION Correct your application.
----------------------------------------------------------------- [REV
END]
[REV BEG]
-421 MESSAGE BTE: unknown qualifier value for DBCONTROL mode
13.
MEANING The function code in the qualifier that passed to
DBCONTROL is invalid.
ACTION Modify the program.
----------------------------------------------------------------- [REV
END]
[REV BEG]
-422 MESSAGE BTE: data set# not in valid range.
MEANING The data set number in the qualifier that passed to
DBCONTROL is invalid.
ACTION Modify the program.
----------------------------------------------------------------- [REV
END]
[REV BEG]
-423 MESSAGE BTE: B-Tree already exists.
MEANING The data set you want to create a B-Tree for
already has a B-Tree associated with it.
ACTION Check which data set you wish to create a B-Tree
for and correct it.
----------------------------------------------------------------- [REV
END]
[REV BEG]
-424 MESSAGE BTE: Failed to create B-Tree .
MEANING The creation of the B-Tree failed.
ACTION Check the third and fourth halfword of the
qualifier parameter passed to DBCONTROL for the
status. This value should provide extra error
information in HPERRMSG format. Notify HP support
personnel.
----------------------------------------------------------------- [REV
END]
[REV BEG]
-425 MESSAGE BTE: DB not opened exclusively.
MEANING The database is not opened exclusively while
creating the B-Tree.
ACTION Modify the program. Creation of a B-Tree requires
exclusive access to the database.
----------------------------------------------------------------- [REV
END]
[REV BEG]
-426 MESSAGE BTE: B-Tree doesn't exist.
MEANING A B-Tree does not appear to exist for a
rebuildindex to work with.
ACTION Check the existence of the B-Tree or modify the
program.
----------------------------------------------------------------- [REV
END]
[REV BEG]
-427 MESSAGE BTE: FCLOSE, purge failed.
MEANING While trying to purge the B-Tree file, FCLOSE
failed.
ACTION Check the status of the B-Tree file. This may
indicate a problem with the file security of the
B-Tree file.
----------------------------------------------------------------- [REV
END]
[REV BEG]
-428 MESSAGE BTE: Rebuildindex failed.
MEANING The process of rebuilding the B-Tree failed.
ACTION Check the third and fourth halfword of the
qualifier parameter you passed to DBCONTROL for the
status. This value should provide extra error
information in HPERRMSG format. Notify HP support
personnel.
----------------------------------------------------------------- [REV
END]
[REV BEG]
-429 MESSAGE BTE: DBFIND argument version is bad.
MEANING The version number in the argument parameter passed
to DBFIND is invalid. The version number tells
DBFIND how to interpret the argument data.
ACTION Modify the program. Refer to DBFIND in chapter 5.
----------------------------------------------------------------- [REV
END]
[REV BEG]
-430 MESSAGE BTE: DBFIND (mode 4/24) argument type is bad.
MEANING The argument type in the argument parameter passed
to DBFIND is invalid.
ACTION Modify the program. Refer to DBFIND in chapter 5.
----------------------------------------------------------------- [REV
END]
[REV BEG]
-431 MESSAGE BTE: DBFIND (mode 4/24) argument #1 length is
bad.
MEANING The size (in bytes) for argument 1 in the argument
parameter passed to DBFIND is less than 0 or
greater than the key length.
ACTION Modify the program.
----------------------------------------------------------------- [REV
END]
[REV BEG]
-432 MESSAGE BTE: WILDCARD NOT ASCII
MEANING The wildcard is not a valid printable ASCII
character (or a decimal value in the range 33-126)
in the DBCONTROL mode 14 call.
ACTION Correct your application.
----------------------------------------------------------------- [REV
END]
[REV BEG]
-433 MESSAGE BTE: DBFIND (mode 4/24) argument #2 length is
bad.
MEANING The size (in bytes) for argument 2 in the argument
parameter passed to DBFIND is less than 0 or
greater than the key length, or not valid for the
search type.
ACTION Modify the program.
----------------------------------------------------------------- [REV
END]
[REV BEG]
-434 MESSAGE BTE: Data set is a detail and not a master.
MEANING The data set being accessed is a detail data set
and not a master data set.
ACTION Correct application.
----------------------------------------------------------------- [REV
END]
[REV BEG]
-436 MESSAGE BTE: Failed to extract data from root file.
MEANING The procedure to get information of the specified
data set failed.
ACTION Check the third and fourth halfword of the
qualifier parameter you passed to DBCONTROL for the
status. This value should provide extra error
information in HPERRMSG format. Notify HP support
personnel.
----------------------------------------------------------------- [REV
END]
[REV BEG]
-437 MESSAGE BTE: Failed to convert @c to [] dbfind.
MEANING Failed to convert wildcard or "greater than
relation" into a "range relation".
ACTION Notify HP support personnel.
----------------------------------------------------------------- [REV
END]
[REV BEG]
-438 MESSAGE BTE: Bad item# in init btree.
MEANING The item number stored in the B-Tree control block
is bad.
ACTION Notify HP support personnel.
----------------------------------------------------------------- [REV
END]
[REV BEG]
-439 MESSAGE BTE: Conversion of key from external to internal
format failed.
MEANING An internal error occurred when converting a key
from external format to internal format. This
conversion is done prior to searching a B-Tree .
ACTION Notify HP support personnel.
----------------------------------------------------------------- [REV
END]
[REV BEG]
-440 MESSAGE BTE: XM Attach of index file failed.
MEANING Attaching a B-Tree to the Transaction Manager (XM)
has failed.
ACTION Check the third and fourth halfword of the
qualifier parameter you passed to DBCONTROL for the
status. This value should provide extra error
information in HPERRMSG format. Notify HP support
personnel.
----------------------------------------------------------------- [REV
END]
[REV BEG]
-441 MESSAGE BTE: XM Detach of index file failed.
MEANING Detaching a B-Tree from the Transaction Manager
(XM) has failed.
ACTION Check the third and fourth halfword of the
qualifier parameter you passed to DBCONTROL for the
status. This value should provide extra error
information in HPERRMSG format. Notify HP support
personnel.
----------------------------------------------------------------- [REV
END]
[REV BEG]
-442 MESSAGE BTE: RELEASE of index file failed.
MEANING Releasing the B-Tree file from GROUP/ACCOUNT
security has failed in DBCONTROL mode 13 call.
ACTION Check the third and fourth halfword of the
qualifier parameter you passed to DBCONTROL for the
status. This value should provide extra error
information in HPERRMSG format. Notify HP support
personnel.
----------------------------------------------------------------- [REV
END]
[REV BEG]
-443 MESSAGE BTE: SECURE of index file failed.
MEANING Securing the B-Tree file (which makes normal
GROUP/ACCOUNT security apply to it) has failed in a
DBCONTROL mode 13 call.
ACTION Check the third and fourth halfword of the
qualifier parameter you passed to DBCONTROL for the
status. This value should provide extra error
information in HPERRMSG format. Notify HP support
personnel.
----------------------------------------------------------------- [REV
END]
[REV BEG]
-444 MESSAGE BTE: DBFIND on non-key field of master.
MEANING The item specified in the parameter is not a key
field in the master data set. DBFIND on a master
data set is allowed only if there is a B-Tree for
the data set, and if the DBFIND item is the master
data set's key item.
ACTION Modify the program, or add a B-Tree to the master
data set.
----------------------------------------------------------------- [REV
END]