HP 3000 Manuals HP 3000 Manuals
Library Procedure Error Messages (Continued)
Library Procedure Calling Errors (Continued)
-234 MESSAGE Cannot purge the 00 file
MEANING The 00 file cannot be purged due to MPE file system
error.
ACTION Find out the file system error number in element 2
of the status array, and notify your database
administrator and HP support personnel.
-----------------------------------------------------------------
-235 MESSAGE Dynamic transaction aborted due to DBCLOSE mode
1, database closed.
MEANING Only DBCLOSE mode 3 is allowed during an active
dynamic transaction.
ACTION Move the DBCLOSE call outside of the dynamic
transaction.
-----------------------------------------------------------------
-236 MESSAGE Internal error nn occurred when opening the AUX
file.
MEANING An internal error has occurred.
ACTION Notify your database administrator and
Hewlett-Packard support personnel.
-----------------------------------------------------------------
-237 MESSAGE Cannot DBXEND or DBXUNDO a DBBEGIN transaction
MEANING A transaction started by a DBBEGIN cannot use
DBXEND or DBXUNDO.
ACTION Replace the DBXEND call with a call to DBEND or
replace the DBBEGIN call with a call to DBXBEGIN.
-----------------------------------------------------------------
[REV BEG]
-238 MESSAGE MDBX, MODES OF DBXBEGIN/DBXEND DON'T MATCH.
MEANING DBXUNDO or DBXEND call, including the mode, does
not match with the dynamic multi-database
transaction started by DBXBEGIN.
ACTION Correct the application.
----------------------------------------------------------------- [REV
END]
[REV BEG]
-240 MESSAGE ERROR IN DYNAMIC ROLLBACK.
MEANING The dynamic transaction could not be rolled back
successfully.
ACTION Notify HP support personnel.
----------------------------------------------------------------- [REV
END]
[REV BEG]
-241 MESSAGE BAD TAG FOR TURBOLKT TABLE.
MEANING The tag in the header record of the lock table,
TURBOLKT.PUB.SYS, appears to be corrupted.
ACTION Notify HP support personnel.
----------------------------------------------------------------- [REV
END]
[REV BEG]
-242 MESSAGE Dynamic Rollback MDBX error.
MEANING Internal errors returned from various low level
procedures which handle dynamic multiple database
transactions.
ACTION Notify HP support personnel.
----------------------------------------------------------------- [REV
END]
[REV BEG]
-243 MESSAGE INVALID DYNAMIC ROLLBACK TRANSACTION ID.
MEANING The transaction id in the base parameter of the
DBXUNDO call does not match with its corresponding
DBXBEGIN.
ACTION Correct the application.
----------------------------------------------------------------- [REV
END]
[REV BEG]
-244 MESSAGE BASE COUNT OVER 15 FOR DMDBX.
MEANING The limit of the number of the databases to be
included in a dynamic multi-database transaction is
15.
ACTION Correct the application.
----------------------------------------------------------------- [REV
END][REV BEG]
-245 MESSAGE OUT OF SPACE FOR TURBOGTX FILE.
MEANING The table, TURBOGTX.PUB.SYS, is full and additional
information cannot be added to this table.
ACTION Notify HP support personnel.
----------------------------------------------------------------- [REV
END][REV BEG]
-246 MESSAGE ERROR IN TURBOGTX OPERATION RELATED TO ATC
TRANSACTION.
MEANING Internal error encountered while updating the
table, TURBOGTX.PUB.SYS, as there is still an
active SQL transaction in the table.
ACTION Notify HP support personnel.
----------------------------------------------------------------- [REV
END]
[REV BEG]
-250 MESSAGE CBINIT FAILED ON nn
MEANING The initialization of a semaphore failed.
ACTION Notify HP support personnel.
----------------------------------------------------------------- [REV
END]
[REV BEG]
-251 MESSAGE DBS WAS OBTAINED BUT NOT RELEASED.
MEANING There is an active lock granted on the file,
TURBODBS.PUB.SYS, and not released.
ACTION Notify HP support personnel.
----------------------------------------------------------------- [REV
END]
-253 MESSAGE Database enabled for indexing, but third-party
indexing is not configured
MEANING This message is returned if you are using
third-party indexing (TPI). The database has been
enabled for indexing via DBUTIL, but the
third-party product or database is not configured
correctly.
ACTION Consult your third-party vendor documentation.
-----------------------------------------------------------------
-254 MESSAGE Rollback of third-party index failed; indexing
disabled for data set
MEANING This message is returned if you are using
third-party indexing (TPI). The third-party product
did not perform the necessary roll-back function to
maintain data set consistency.
ACTION Consult your third-party vendor documentation.
-----------------------------------------------------------------
-255 MESSAGE Third-party indexing disable failed; indexing
disabled for database
MEANING This message is returned if you are using
third-party indexing (TPI). The third-party product
did not perform the necessary roll-back and
single-index-disable functions to maintain database
consistency (see error -254).
ACTION Consult your third-party vendor documentation.
-----------------------------------------------------------------
-256 MESSAGE Third-party index for path nn is full
MEANING This message is returned if you are using
third-party indexing (TPI). The index file for the
indicated path is full; nn represents the path
number.
ACTION Consult your third-party vendor documentation.
-----------------------------------------------------------------
-257 MESSAGE Third-party index for path nn is damaged
MEANING This message is returned if you are using
third-party indexing (TPI). The index file for the
indicated path is damaged; nn represents the path
number.
ACTION Consult your third-party vendor documentation.
-----------------------------------------------------------------
-258 MESSAGE Invalid argument for index
MEANING This message is returned if you are using
third-party indexing (TPI). The argument parameter
contained an inappropriate value for the specified
index.
ACTION Consult your third-party vendor documentation.
-----------------------------------------------------------------
-259 MESSAGE Invalid mode for index
MEANING This message is returned if you are using
third-party indexing (TPI). The mode is not
applicable to this type of index.
ACTION Consult your third-party vendor documentation.
-----------------------------------------------------------------
-260 MESSAGE No previous list of qualified data entries
MEANING This message is returned if you are using
third-party indexing (TPI). The DBFIND mode
specified can only be used if a qualified set of
entries exists.
ACTION Consult your third-party vendor documentation.
-----------------------------------------------------------------
[REV BEG]
-261 MESSAGE DYNAMIC PROCEDURE LOAD ERROR FOR INTRINSIC
ROLLBACK.
MEANING There is a mismatch of the TurboIMAGE/XL version on
the system and MPE/iX. The failed DBPUT, DBDELETE,
or DBUPDATE could not be rolled back.
ACTION Notify your system administrator.
----------------------------------------------------------------- [REV
END]
[REV BEG]
-262 MESSAGE OLDER/INCOMPATIBLE VERSION OF IMAGE/SQL.
MEANING The version of IMAGE/SQL on the system is
incompatible with TurboIMAGE/XL.
ACTION Notify your system administrator.
----------------------------------------------------------------- [REV
END]
[REV BEG]
-263 MESSAGE INVALID PCODE RETURNED BY TPI.
MEANING The third-party indexing product returned an
unsupported or invalid pcode to IMAGE/SQL.
ACTION Notify your system administrator or third-party
vendor.
----------------------------------------------------------------- [REV
END]
[REV BEG]
-264 TPIXMWRITERR
MESSAGE WRITE ERROR FOR TPI FILES.
MEANING Third-party indexing product encountered error from
storage management procedures. The transaction may
be too big, causing the transaction to stall.
ACTION Notify HP support personnel.
----------------------------------------------------------------- [REV
END]
[REV BEG]
-265 MESSAGE ERROR IN THIRD-PARTY SHADOWING PACKAGE.
MEANING An internal error encountered while writing to
third-party shadowing files.
ACTION Notify your HP personnel.
----------------------------------------------------------------- [REV
END]
[REV BEG]
-266 MESSAGE ERROR WHILE DISABLING THIRD-PARTY SHADOWING.
MEANING An internal error encountered while disabling
third-party shadowing feature.
ACTION Notify your HP personnel.
----------------------------------------------------------------- [REV
END]
[REV BEG]
-267 MESSAGE DAMAGED FILE ERROR RETURNED BY THIRD-PARTY
SHADOWING.
MEANING The files used for third-party shadowing appear to
be corrupted.
ACTION Notify your HP personnel.
----------------------------------------------------------------- [REV
END]
[REV BEG]
-268 MESSAGE INVALID PCODE RETURNED BY TPS
MEANING The third-party shadowing product returned an
unsupported or invalid pcode to IMAGE/SQL.
ACTION Notify your HP personnel.
----------------------------------------------------------------- [REV
END]
[REV BEG]
-269 MESSAGE WRITE ERROR FOR TPS FILES.
MEANING The transaction management encountered error while
writing to third-party shadowing files.
ACTION Notify your HP personnel.
----------------------------------------------------------------- [REV
END]
-3nn MESSAGE Internal error returned
MEANING Internal error nn occurred while in an intrinsic.
ACTION Notify HP support personnel.
-----------------------------------------------------------------
[REV BEG]
-305 MESSAGE INVALID DATA SET NUMBER.
MEANING Invalid set number for the master set. The
internal error is returned when trying to find the
primary address in the set using the key value.
ACTION Notify your HP personnel.
----------------------------------------------------------------- [REV
END]
[REV BEG]
-306 MESSAGE INVALID DATA SET TYPE.
MEANING Invalid set type, must be master. The internal
error is returned when trying to find the primary
address in the set using the key value.
ACTION Notify your HP personnel.
----------------------------------------------------------------- [REV
END]
[REV BEG]
-307 MESSAGE INVALID RECORD NUMBER FOUND.
MEANING The internal record pointer is bad.
ACTION Notify HP support personnel.
----------------------------------------------------------------- [REV
END]