HP 3000 Manuals HP 3000 Manuals
MPE XL SNA Transport Error Messages (SNAERR)
The following SNA Transport messages can appear on Pass Thru devices or,
in some cases, the system console.
---------------------------------------------------------------------------------------
SNAERR 0 MESSAGE Successful Completion. (SNAERR 0)
CAUSE The SNA Transport intrinsic was successfully completed.
ACTION None.
---------------------------------------------------------------------------------------
SNAERR 1 MESSAGE Illegal DB register. (SNAERR 1)
call to an SNA Transport intrinsic was made in split
stack.
CAUSE An SNA subsystem made a call to an SNA Transport
intrinsic while in split stack mode.
ACTION Note the circumstances and report them to your HP
representative.
---------------------------------------------------------------------------------------
SNAERR 2 MESSAGE Invalid session. (SNAERR 2)
A call was made to an SNA Transport intrinsic with a bad
session number.
CAUSE A call to an SNA Transport intrinsic was made, specifying
an invalid session number parameter.
ACTION Note the circumstances and report them to your HP
representative.
---------------------------------------------------------------------------------------
SNAERR 3 MESSAGE Missing Completer Parameter. (SNAERR 3)
An SNA Transport completion occurred with a missing
parameter.
CAUSE The SNA completer was activated with an invalid
Cstation, Xfercount, or TargetFlag parameter.
ACTION Note the circumstances and report them to your HP
representative.
---------------------------------------------------------------------------------------
SNAERR 4 MESSAGE Security violation. (SNAERR 4)
User or program not authorized to use this SNA class.
CAUSE An SNA subsystem, or the user, is not authorized to use
this SNA class.
ACTION Specify a class name the subsystem or user is authorized
to use. Check with your system administrator to
determine the correct class to use.
---------------------------------------------------------------------------------------
SNAERR 5 MESSAGE Parameter bounds violation. (SNAERR 5)
An out-of-bounds parameter was passed to an SNA Transport
intrinsic.
CAUSE An SNA subsystem passed an out-of-bounds parameter to an
SNA Transport intrinsic.
ACTION Note the circumstances and report them to your HP
representative.
---------------------------------------------------------------------------------------
SNAERR 6 MESSAGE Invalid flag parameter. (SNAERR 6)
An invalid flag parameter was passed to an SNA Transport
intrinsic.
CAUSE The Flag parameter passed to the SNARcv or SNAPreview
intrinsic was invalid.
ACTION Note the circumstances and report them to your HP
representative.
---------------------------------------------------------------------------------------
SNAERR 7 MESSAGE Session is active. (SNAERR 7)
The LU-SSCP session for this NAU is active.
CAUSE
ACTION None.
---------------------------------------------------------------------------------------
SNAERR 9 MESSAGE No available AFT entry. (SNAERR 9)
No room left in current stack segment for another AFT.
CAUSE An SNAOpenuser was attempted, but no room for another AFT
entry is available in the current stack segment.
ACTION Note the circumstances and report them to your HP
representative.
---------------------------------------------------------------------------------------
SNAERR 10 MESSAGE Bad PI in RH. (SNAERR 10)
The pacing indicator was set in the RH sent to SNA
Transport.
CAUSE The Pacing Indicator (PI) was set in the RH passed to one
of the SNA Send intrinsics.
ACTION Note the circumstances and report them to your HP
representative.
---------------------------------------------------------------------------------------
SNAERR 11 MESSAGE Bad BCI in RH. (SNAERR 11)
An improper chaining sequence occurred.
CAUSE The Begin Chain Indicator (BCI) was not set in the RH
passed to one of the SNA Send intrinsics when sending a
response.
ACTION Note the circumstances and report them to your HP
representative.
---------------------------------------------------------------------------------------
SNAERR 12 MESSAGE Bad ECI in RH. (SNAERR 12)
An improper chaining sequence occurred.
CAUSE The End Chain Indicator (ECI) was not set in the RH
passed to one of the SNA Send intrinsics when sending a
response.
ACTION Note the circumstances and report them to your HP
representative.
---------------------------------------------------------------------------------------
SNAERR 13 MESSAGE Bad EDI in RH. (SNAERR 13)
Attempt was made to send enciphered data.
CAUSE The Enciphered Data Indicator (EDI) was set in the RH
passed to one of the SNA Send intrinsics when sending a
request.
ACTION Note the circumstances and report them to your HP
representative.
---------------------------------------------------------------------------------------
SNAERR 14 MESSAGE Reserved bits in RH must be set to zero. (SNAERR 14)
CAUSE Various reserved bits in the RH were incorrectly set by
the calling SNA subsystem when making a call to the SNA
Send intrinsics.
ACTION Note the circumstances and report them to your HP
representative.
---------------------------------------------------------------------------------------
SNAERR 15 MESSAGE Internal Error. (SNAERR 15)
An SNA Transport Internal Error occurred.
CAUSE A serious error occurred in SNA Transport.
ACTION Note the circumstances and report them to your HP
representative.
---------------------------------------------------------------------------------------
SNAERR 16 MESSAGE Invalid RU size. (SNAERR 16)
An attempt was made to send an RU longer than the Max RU
size.
CAUSE A call to the SNA Send intrinsics was made, specifying a
buffer length larger than the one specified in the Half
Session Control Block (HSCB) for that session.
ACTION Note the circumstances and report them to your HP
representative.
---------------------------------------------------------------------------------------
SNAERR 17 MESSAGE NAU is inactive. (SNAERR 17)
The LU-SSCP session for this NAU is inactive.
CAUSE A call to SNAOpenuser to open an LU-LU session was made,
and the corresponding LU-SSCP session is not yet active.
ACTION Ensure that the LU-SSCP session has been activated on the
host side. If it has not been activated, activate it and
try again.
---------------------------------------------------------------------------------------
SNAERR 18 MESSAGE Invalid Plabel. (SNAERR 18)
An Invalid plabel was passed to the SNAControl intrinsic.
CAUSE A call to the SNAControl intrinsic (with FunctionCode= 1)
passed a bad Plabel for the software interrupt procedure.
ACTION Note the circumstances and report them to your HP
representative.
---------------------------------------------------------------------------------------
SNAERR 19 MESSAGE LU-SSCP message pending. (SNAERR 19)
CAUSE A message on the LU-SSCP session is pending and must be
completed before a Send can be issued.
ACTION A call to SNARcv or SNARcvfromSSCP must be made before
any calls to the SNA Send intrinsics are made.
---------------------------------------------------------------------------------------
SNAERR 20 MESSAGE RU buffer too small. (SNAERR 20)
An RU received was larger than the buffer provided.
CAUSE An SNA Receive completed, but the RU received was larger
than the buffer provided in the SNARcv, Preview, or
RcvfromSSCP call.
ACTION Note the circumstances and report them to your HP
representative.
---------------------------------------------------------------------------------------
SNAERR 21 MESSAGE Invalid class name. (SNAERR 21)
The Class name specified does not exist.
CAUSE A call to SNAOpenuser to open an LU-LU session was made,
but the class name specified in the call is not
configured for this node.
ACTION Check with your system manager for the valid classes
configured for the requested node.
---------------------------------------------------------------------------------------
SNAERR 22 MESSAGE Invalid session type. (SNAERR 22)
An attempt was made to open a non LU-LU session.
CAUSE A call to SNAOpenuser was made to open a session,
specifying an invalid session type parameter.
ACTION Note the circumstances and report them to your HP
representative.
---------------------------------------------------------------------------------------
SNAERR 23 MESSAGE Negative LU-SSCP response. (SNAERR 23)
A negative response was sent by the host in response to a
request.
CAUSE An SNA subsystem received a negative response as a result
of a call to the SNASendtoSSCP intrinsic.
ACTION Note the circumstances and report them to your HP
representative.
---------------------------------------------------------------------------------------
SNAERR 24 MESSAGE Invalid configuration access. (SNAERR 24)
SNA Transport was unable to access the required
configuration data.
CAUSE A call to NMConfgetdata failed.
ACTION Note the circumstances and report them to your HP
representative.
---------------------------------------------------------------------------------------
SNAERR 25 MESSAGE Request pending. (SNAERR 25)
An SNA Transport Receive request is already pending.
CAUSE A call to an SNA Transport Receive intrinsic was made
while a current request is outstanding.
ACTION Note the circumstances and report them to your HP
representative.
---------------------------------------------------------------------------------------
SNAERR 26 MESSAGE No available NAU. (SNAERR 26)
All LUs in the specified SNA class are currently in use.
CAUSE All LUs in the specified SNA class are currently in use.
ACTION Try again later when the system is less busy, or try
using another SNA class.
---------------------------------------------------------------------------------------
SNAERR 27 MESSAGE IO pending. (SNAERR 27)
CAUSE A call to the SNAClose or SNAControl intrinsic was made
while a send or receive is pending.
ACTION Note the circumstances and report them to your HP
representative.
---------------------------------------------------------------------------------------
SNAERR 28 MESSAGE Invalid function code. (SNAERR 28)
CAUSE An SNA subsystem passed a bad function code to the
SNAControl or SNASessinfo intrinsic.
ACTION Note the circumstances and report them to your HP
representative.
---------------------------------------------------------------------------------------
SNAERR 29 MESSAGE Inactive node or invalid node name. (SNAERR 29)
CAUSE A call to the SNAOpenuser intrinsic was made, specifying
an invalid node name.
ACTION Ensure that the specified node is a valid SNA node that
is currently active.
---------------------------------------------------------------------------------------
SNAERR 30 MESSAGE Illegal call. (SNAERR 30)
An attempt was made to access an LU-SSCP session in an
LU-LU session.
CAUSE A call to the SNASendtoSSCP or SNARcvfromSSCP intrinsic
was made on an LU-LU session.
ACTION Note the circumstances and report them to your HP
representative.
---------------------------------------------------------------------------------------
SNAERR 31 MESSAGE Invalid error code. (SNAERR 31)
CAUSE An invalid error code was passed to the SNAErrmsg
intrinsic.
ACTION Note the circumstances and report them to your HP
representative.
---------------------------------------------------------------------------------------
SNAERR 32 MESSAGE Privilege mode required. (SNAERR 32)
CAUSE An attempt to call an SNA Transport intrinsic was made
while in user mode.
ACTION Note the circumstances and report them to your HP
representative.
---------------------------------------------------------------------------------------
SNAERR 33 MESSAGE Invalid InfoWanted parameter. (SNAERR 33)
CAUSE A call to the SNASessinfo intrinsic was made, specifying
an invalid InfoWanted parameter.
ACTION Note the circumstances and report them to your HP
representative.
---------------------------------------------------------------------------------------
SNAERR 35 MESSAGE No request pending. (SNAERR 35)
CAUSE An attempt to abort an SNA Receive, RcvFromSSCP, or
SendtoSSCP was made when no such request was outstanding.
ACTION Note the circumstances and report them to your HP
representative.
---------------------------------------------------------------------------------------
SNAERR 36 MESSAGE Link shutdown occurred. (SNAERR 36)
CAUSE A link shutdown has been requested via the SNACONTROL
STOP command, and all sessions are being notified.
ACTION Wait until the link has been restarted and then continue.
---------------------------------------------------------------------------------------
SNAERR 37 MESSAGE Protocol shutdown requested. (SNAERR 37)
CAUSE A protocol shutdown has been requested via the SNACONTROL
STOP command, and all sessions are being notified.
ACTION Wait until the link has been restarted and then continue.
---------------------------------------------------------------------------------------
SNAERR 38 MESSAGE Quiesce shutdown requested. (SNAERR 38)
CAUSE A quiesce shutdown has been requested with the SNACONTROL
STOP command. New sessions will not be started, and all
current active sessions are to complete their current
activities and close in an orderly fashion.
ACTION Wait until the link has been restarted and then continue.
---------------------------------------------------------------------------------------
SNAERR 39 MESSAGE Invalid Msg Catalog. (SNAERR 39)
SNA Transport was unable to access its catalog file.
CAUSE The SNA Transport message catalog file, CATSNA.PUB.SYS,
is missing, invalid, or locked by another process.
ACTION Replace the catalog file with a valid SNA catalog file.
---------------------------------------------------------------------------------------
SNAERR 40 MESSAGE Out of Stack Space. (SNAERR 40)
CAUSE A call was made to an SNA Transport intrinsic without
enough stack space available or with the data segment
frozen in memory.
ACTION Note the circumstances and report them to your HP
representative.
---------------------------------------------------------------------------------------
SNAERR 48 MESSAGE Invalid data offset. (SNAERR 48)
CAUSE A call to an SNA Transport intrinsic was made, specifying
an invalid offset into the given data segment.
ACTION Note the circumstances and report them to your HP
representative.
---------------------------------------------------------------------------------------
SNAERR 51 MESSAGE Link Failure occurred. (SNAERR 51)
CAUSE A link failure has occurred, and all sessions are being
notified.
ACTION Wait until the node has been reactivated and then try
again.
---------------------------------------------------------------------------------------
SNAERR 52 MESSAGE SNA Transport Internal Error Shutdown. (SNAERR 52)
CAUSE An SNA Transport internal error has occurred, and all
sessions are being notified.
ACTION Note the circumstances and report them to your HP
representative.
---------------------------------------------------------------------------------------
SNAERR 53 MESSAGE Hierarchical Shutdown. (SNAERR 53)
CAUSE A hierarchical shutdown is occurring, and all sessions
are being notified.
ACTION Wait until the node has been reactivated and then try
again.
---------------------------------------------------------------------------------------
SNAERR 55 MESSAGE Bad Maxinfo length parameter. (SNAERR 55)
CAUSE A call to the SNASessinfo intrinsic was made, specifying
an invalid MaxInfoLength parameter.
ACTION Note the circumstances and report them to your HP
representative.
---------------------------------------------------------------------------------------
SNAERR 100 MESSAGE Expedited response pending. (SNAERR 100)
CAUSE An attempt to send an expedited request was made while in
a state that does not allow it.
ACTION Note the circumstances and report them to your HP
representative.
---------------------------------------------------------------------------------------
SNAERR 101 MESSAGE Data traffic inactive. (SNAERR 101)
CAUSE An attempt to send a request was made before a Start Data
Traffic (SDT) had been received, or the positive response
has been sent.
ACTION Note the circumstances and report them to your HP
representative.
---------------------------------------------------------------------------------------
SNAERR 102 MESSAGE SDT request not received. (SNAERR 102)
CAUSE A response to a Start Data Traffic (SDT) is being sent,
but no SDT was received from the host.
ACTION Note the circumstances and report them to your HP
representative.
---------------------------------------------------------------------------------------
SNAERR 103 MESSAGE Invalid session control protocol. (SNAERR 103)
CAUSE An invalid sequence of session control events has
occurred.
ACTION Note the circumstances and report them to your HP
representative.
---------------------------------------------------------------------------------------
SNAERR 104 MESSAGE RQR request pending. (SNAERR 104)
CAUSE An attempt to send an RQR request was made while in a
state other than Reset.
ACTION Note the circumstances and report them to your HP
representative.
---------------------------------------------------------------------------------------
SNAERR 105 MESSAGE STSN request not pending. (SNAERR 105)
CAUSE A response to an STSN request is being sent, but no
corresponding STSN request has been received.
ACTION Note the circumstances and report them to your HP
representative.
---------------------------------------------------------------------------------------
SNAERR 107 MESSAGE Unsupported CRV request/response. (SNAERR 107)
CAUSE An attempt to send a CRV request or response was made.
ACTION Note the circumstances and report them to your HP
representative.
---------------------------------------------------------------------------------------
SNAERR 108 MESSAGE Unsupported session control request. (SNAERR 108)
CAUSE An attempt to send an unsupported Session Control (SC)
request was made.
ACTION Note the circumstances and report them to your HP
representative.
---------------------------------------------------------------------------------------
SNAERR 109 MESSAGE Unsupported session control response. (SNAERR 109)
CAUSE An attempt to send an unsupported Session Control (SC)
response was made.
ACTION Note the circumstances and report them to your HP
representative.
---------------------------------------------------------------------------------------
SNAERR 110 MESSAGE No such deactivation request (UNBIND,DACTLU,DACTPU)
received. (SNAERR 110)
CAUSE An SNA service is trying to send a response to a
deactivation request (UNBIND, DACTLU, or DACTPU), but no
such deactivation request has been received.
ACTION The SNA service should examine the situations in which a
deactivation response is sent, and verify that a response
is sent only after a deactivation request has been
received.
---------------------------------------------------------------------------------------
SNAERR 111 MESSAGE No such activation request (BIND,ACTLU,ACTPU) received.
(SNAERR 111)
CAUSE An SNA service is trying to send a response to an
activation request (UNBIND, DACTLU, or DACTPU), but no
such activation request has been received.
ACTION The SNA service should examine the situations in which an
activation response is sent, and verify that a response
is sent only after an activation request has been
received
---------------------------------------------------------------------------------------
SNAERR 112 MESSAGE The target parameter passed to iowait is too small.
(SNAERR 112)
CAUSE A target parameter passed in a call to the IOWAIT
intrinsic is too small to receive sense data. The size
of the target parameter is checked only when a non-waited
call to the SendToSSCP intrinsic completes.
ACTION Ensure that the size of the target parameter (the second
parameter) that was passed to the IOWAIT intrinsic is at
least 4 bytes.