HP 3000 Manuals HP 3000 Manuals
NTRI Example
This example shows an NCP configuration for a token ring connection and
the corresponding switched major node definition.
*******************************************************************
* *** LUDRPOOL *** *
* THIS DEFINITION STATEMENT SPECIFIES POOLS OF EMPTY LUCB'S *
* WHILE USING DYNAMIC RECONFIGURATION OR SWITCHED SDLC LINKS. *
*******************************************************************
LUDRPOOL NUMTYP2=150, ADD 50 FOR TOKEN RING NODES T
NUMILU=150
*
*******************************************************************
* *** GROUP: TRN1GRP *** *
* *
* THE FOLLOWING DEFINITIONS ARE FOR THE TOKEN RING INTERFACE CARD *
* THE FIRST GROUP DEFINITION IS THE PHYSICAL GROUP DEFINITION. *
* THIS IS FOLLOWED BY THE LOGICAL GROUP DEFINITION OF THE SAME *
* PHYSICAL TIC. BOTH PHYSICAL AND LOGICAL GROUP DEFINITIONS *
* REQUIRE THEIR OWN PU AND LU DEFINITIONS. *
*******************************************************************
TRN1PGRP GROUP ECLTYPE=(PHYSICAL,PERIPHERAL), PERIPHERAL NODE ONLY T
COMPSWP=NO, NOT ELIGIBLE FOR TIC SWAP T
DIAL=NO, MUST BE NO FOR PHYSICAL LINE T
LNCTL=SDLC, LINE TYPE. T
OWNER=INDMVS, VTAM ID THAT OWNS LINE. T
TYPE=NCP NCP MODE ONLY FOR THIS GROUP.
*
*
*
*
TR1PLIN1 LINE ADAPTER=TIC2, TYPE OF TRA ATTACHED T
ADDRESS=(1088,FULL), FOR THE 1ST PORT ON THE TIC T
PORTADD=1, PORT FOR THIS LINE T
LOCADD=400013745101, TOKEN RING ADDRESS T
RCVBUFC=4095, RECEIVE BUFFER FOR DATA FROM TR T
MAXTSL=1108, LARGEST PIU NTRI CAN TRANSMIT T
TRSPEED=4 4MB PER SECOND RING
*
* TR1PPU1 PU
* TR1PLU1 LU
*
*******************************************************************
* *** GROUP: TR1LGRP *** *
* *
* THE FOLLOWING DEFINITIONS ARE FOR THE TOKEN RING INTERFACE CARD *
* THIS IS THE LOGICAL DEFINITION OF TOKEN RING ADAPTER 1 PORT 1 *
* *
*******************************************************************
TR1LGRP GROUP ECLTYPE=(LOGICAL,PERIPHERAL),PERIPHERAL NODE ONLY T
DIAL=YES, PAGE ES OR NCP CAN INITIATE T
PHYPORT=1 MATCH TO PORTADD ABOVE
*
TR1LLIN1 LINE AUTOCOPY=(2,TR1LLIN2)
TR1LPU1 PU NEXT=(TR1LPU2)
ENDAUTO
*
*
VTAM Switched Major node for 3745 TRN
TRN3745 VBUILD TYPE=SWNET
*
TR1LPU1 PU ADDR=10,
USSTAB=HPUSSTAB,MODETAB=HPMODTAB,ISTATUS=ACTIVE,
IDBLK=017,IDNUM=DCA01,ANS=CONT,PUTYPE=2, XID=YES,
DISCNT=NO,MAXDATA=265,MAXOUT=1,VPACING=0
*
TIC1LU11 LU LOCADDR=2,DLOGMOD=HPM2X
TIC1LU12 LU LOCADDR=3,DLOGMOD=HPM2X
TIC1LU13 LU LOCADDR=4,DLOGMOD=HPM2X
TIC1LU14 LU LOCADDR=5,DLOGMOD=HPM2X
TIC1LU15 LU LOCADDR=6,DLOGMOD=HPM2X
*
TR1LPU2 PU ADDR=11,
USSTAB=HPUSSTAB,MODETAB=HPMODTAB,ISTATUS=INACTIVE,
IDBLK=017,IDNUM=DCA02,ANS=CONT,PUTYPE=2,XID=YES,
DLOGMOD=D4B32784,
DISCNT=NO,MAXDATA=265,MAXOUT=1,VPACING=0
*
TIC1LU21 LU LOCADDR=2
TIC1LU22 LU LOCADDR=3
TIC1LU23 LU LOCADDR=4
TIC1LU24 LU LOCADDR=5
TIC1LU25 LU LOCADDR=6
*
TR1LPU3 PU ADDR=12, X
USSTAB=HPUSSTAB,MODETAB=HPMODTAB,ISTATUS=INACTIVE, X
IDBLK=017,IDNUM=DCA03,ANS=CONT, PUTYPE=2,XID=YES X
DLOGMOD=D4B32784, X
DISCNT=NO,MAXDATA=265,MAXOUT=1,VPACING=0
*
TIC1LU31 LU LOCADDR=2
TIC1LU32 LU LOCADDR=3
TIC1LU33 LU LOCADDR=4
TIC1LU34 LU LOCADDR=5
TIC1LU35 LU LOCADDR=6
*