HP 3000 Manuals HP 3000 Manuals
SNA NRJE Logging Messages (continued)
---------------------------------------------------------------------------------------
9050 MESSAGE NRJE(!:!): COULD NOT ROUTE OUTPUT AS REQUESTED FOR
JOB NAME = !. ALTERNATE DESTINATION OF '!'
REQUESTED BY USER '!'. OUTPUT ROUTED TO DEFAULT
DESTINATION, OUTPUT PRIORITY = 2. (LU=9050)
CAUSE A user specified an output routing option in the
SUBMIT command but NRJE was unable to route the
output as requested. The output was routed to the
default destination specified in the writer data
screen using an output priority of 2.
ACTION Contact the affected user.
---------------------------------------------------------------------------------------
9051 MESSAGE NRJE(!:!): FAILURE TO EXECUTE FERRMSG INTRINSIC
USING FILE SYSTEM ERROR CODE = !. (LU=9051)
CAUSE As above. Internal software error.
ACTION Contact Hewlett-Packard.
---------------------------------------------------------------------------------------
9052 MESSAGE NRJE(!:!): FILE SYSTEM ERROR ON '!' ! FOR HOST
JOB NUMBER: !. (LU=9052)
CAUSE The indicated error occurred while attempting to
route a user's dataset to the proper destination.
ACTION Contact the affected user.
---------------------------------------------------------------------------------------
9053 MESSAGE NRJE(!:!): FORMID NOT FOUND IN LOOKUP TABLE. FORM
'!' WAS REQUESTED BY JOB NUMBER ! (JOB NAME= !).
COULD NOT ROUTE OUTPUT AS REQUESTED. (LU=9053)
CAUSE A user specified a form name which could not be
found in the Lookup Table.
ACTION Contact the affected user. Ensure that all users
are informed of all form names supported by the
workstation.
---------------------------------------------------------------------------------------
9054 MESSAGE NRJE(!:!): FAILED TO OPEN OUTPUT FILE. '!.' HOST
JOB NUMBER = !. (LU=9054)
CAUSE A File System error occurred while attempting to
open an output file for a user's dataset. Output
will be routed to the default destination with an
output priority of 2.
ACTION Contact the affected user.
---------------------------------------------------------------------------------------
9055 MESSAGE NRJE(!:!): BAD JOBNUMBER RETURNED BY WRITER EXIT
PROCEDURE JOBNUMBER = !, IGNORED. (LU=9055)
CAUSE An exit procedure indicated it had decoded the host
banner but returned a jobnumber which was not in
the valid range of ASCII "-1" to ASCII "9999".
ACTION Fix the procedure.
---------------------------------------------------------------------------------------
9056 MESSAGE NRJE(!:!): UNSOLICITED OUTPUT RECEIVED FOR HOST
JOB NUMBER !. (LU=9056)
CAUSE Information message. NRJE is receiving a dataset
for which the host jobnumber was not found in the
Joblog. This is true of all output received from
POWER hosts.
ACTION Determine whether the console message format has
been changed by host system programmers. If true
then install an exit procedure to correctly parse
the "ON READER" message. If false, contact
Hewlett-Packard for assistance.
CAUSE If JES2 or JES3 then the job apparently did not
originate at this remote. If the job did originate
at this remote then either (1) NRJE did not
correctly parse the host "ON READER" message
indicating the host job number or (2) the host sent
an output dataset prior to sending the "ON READER"
message.
ACTION Reduce the number of LU's for the workstation.
---------------------------------------------------------------------------------------
9057 MESSAGE NRJE(!:!): CANNOT LOCK THE JOBLOG FILE. (FSERR=!)
(LU=9057)
CAUSE FLOCK intrinsic could not be executed on the Joblog
file. The message logged immediately prior to this
one describes the FSERR number. Internal software
error.
ACTION Contact Hewlett-Packard.
---------------------------------------------------------------------------------------
9058 MESSAGE NRJE(!:!): WARNING: JOB NAME FOR HOST JOB NUMBER !
DOES NOT MATCH JOB LOG ENTRY. JOB LOG ENTRY = '!'.
PDIR JOB NAME = '!'. JOBLOG ENTRY WILL BE IGNORED.
(LU=9058)
CAUSE NRJE received a dataset with a host jobnumber for
which an entry was found in the Joblog. However,
the name of the job in the PDIR received from the
host did not match with the name of the job in the
Joblog record. This implies that the Joblog record
is an 'old' entry and the host has recycled job
numbers.
ACTION Verify that the host has recycled job numbers since
the indicated entry in the Joblog was made. If
confirmed, execute the PURGE OLD command to clear
the Joblog of old entries.
---------------------------------------------------------------------------------------
9059 MESSAGE NRJE(!:!): END OF FILE ENCOUNTERED WHILE RECEIVING
OUTPUT FOR JOB !. REMAINDER OF DATA SET ROUTED TO
DEFAULT DESTINATION, OUTPUT PRIORITY = 2.
(LU=9059)
CAUSE While writing a data set to a disc file, NRJE
encountered an end of file condition on the output
file.
ACTION Inform the owner of the indicated job. The user
should ensure that all disc files are large enough
to contain the output.
---------------------------------------------------------------------------------------
9060 MESSAGE NRJE(!:!): FAILED TO REWIND OUTPUT STREAM FILE
(LU=9060)
CAUSE NRJE received a punch dataset on the reserved
command form CMD. Before NRJE can stream the file
it must execute a REWIND, FREAD, and FCLOSE on the
output file. The REWIND failed.
ACTION Refer to the message logged immediately prior to
this message to identify the nature of the failure.
---------------------------------------------------------------------------------------
9061 MESSAGE NRJE(!:!): FAILED TO READ OUTPUT STREAM FILE
(LU=9061)
CAUSE NRJE received a punch dataset on the reserved
command form CMD. Before NRJE can stream the file
it must execute a REWIND, FREAD, and FCLOSE on the
output file. The FREAD failed.
ACTION Refer to the message logged immediately prior to
this message to identify the nature of the failure.
---------------------------------------------------------------------------------------
9062 MESSAGE NRJE(!:!): FAILED TO OPEN A BACK REFERENCED FILE
EQUATION: '!'. (LU=9062)
CAUSE Output was routed to either a Lookup Table file
equation entry or to a file equation entered by a
user with the SUBMIT command. NRJE failed to open
using this file equation. The output was routed to
the default destination with an output priority of
two.
ACTION Refer to the message logged immediately following
this message to identify the nature of the failure.
If failure was due to a Lookup Table entry, correct
the entry (use the VERIFY command to ensure all
entries are valid).
---------------------------------------------------------------------------------------
9063 MESSAGE NRJE(!:!): FAILED TO WRITE TO OUTPUT FILE FOR JOB
NUMBER !. (LU=9063)
CAUSE An FWRITE error occurred on an output file while
receiving data from the host.
ACTION Refer to the message logged immediately prior to
this one which identifies the nature of the file
system error.
---------------------------------------------------------------------------------------
9064 MESSAGE NRJE(!:!): DATASET LOST FOR HOST JOB ! OUTPUT FILE
COULD NOT BE OPENED. ! RECORDS WERE RECEIVED
(LU=9064)
CAUSE NRJE received a dataset for which banner decode
failed and the default Output Destination specified
in the in the NRJE Configuration: Writer Data
screen could not be opened to route the output.
ACTION Refer to the messages logged immediately prior to
this one to identify the nature of the failure to
open the output file.
---------------------------------------------------------------------------------------
9065 MESSAGE NRJE(!:!): WRITER EXIT PROCEDURE '!' LOADED.
(LU=9065)
CAUSE A banner decode exit procedure configured for a
writer was loaded successfully.
ACTION None.
---------------------------------------------------------------------------------------
9066 MESSAGE NRJE(!:!): WARNING: JOB NUMBER ! WAS RECYCLED BY
THE HOST. JOBLOG MAINTENANCE REQUIRED. (LU=9066)
CAUSE A job was submitted to the host which returned a
host job number. This number was found to
represent an entry in the Joblog which already
existed. This indicates that the host has begun to
recycle job numbers and has therefore overwritten
the Joblog entry.
ACTION Execute the PURGE OLD command to clear the Joblog
of expired entries.
---------------------------------------------------------------------------------------
9067 MESSAGE NRJE(!:!): WARNING: RECORD WIDTH OF FILE ! IS !
BYTES WHICH EXCEEDS THE MAXIMUM ALLOWED WIDTH OF
256 BYTES. HOST JOB NUMBER = !. (LU=9067)
CAUSE Attempt was made to route output to a file of
greater than 256 bytes, the maximum supported by
NRJE. NRJE will still route the output to the
destination file but will write a maximum of 256
bytes per record. NRJE pads with EBCDIC blanks
when routing to fixed width disc files and will pad
only to the maximum record width of 256 bytes.
ACTION Inform the user of the affected job of the maximum
supported record width.
---------------------------------------------------------------------------------------
9068 MESSAGE NRJE(!:!): WARNING: RECORD WIDTH OF FILE ! IS !
BYTES WHICH IS LESS THAN THE MINIMUM ALLOWED WIDTH
OF 40 BYTES. HOST JOB NUMBER = !. (LU=9068)
CAUSE A user is attempting to route output to a
destination with a record width of less than 40
bytes.
ACTION Inform the affected user of the supported record
widths (40 to 256 bytes).
---------------------------------------------------------------------------------------
9069 MESSAGE NRJE(!:!): NRJE HAS PASSED AN ENTIRE PRINT DATASET
TO A USER EXIT PROCEDURE (LU=9069)
CAUSE Advisory message only. An exit procedure did not
return either JOBNUMBER or FILENUMBER to NRJE
causing NRJE to pass the entire dataset to the exit
procedure. It is presumed that the exit procedure
has routed the dataset to the proper destination.
ACTION None.
---------------------------------------------------------------------------------------
9070 MESSAGE NRJE(!:!): NRJE HAS PASSED AN ENTIRE PUNCH DATASET
TO A USER EXIT PROCEDURE (LU=9070)
CAUSE Advisory message only. An exit procedure did not
return either JOBNUMBER or FILENUMBER to NRJE
causing NRJE to pass the entire dataset to the exit
procedure. It is presumed that the exit procedure
has routed the dataset to the proper destination.
ACTION None.
---------------------------------------------------------------------------------------
9071 MESSAGE NRJE(!:!): CONSOLE EXIT PROCEDURE '!' LOADED.
(LU=9071)
CAUSE
ACTION
---------------------------------------------------------------------------------------
9072 MESSAGE NRJE(!:!): FOPEN FAILURE: '!.' (LU=9072)
CAUSE
ACTION
---------------------------------------------------------------------------------------
9073 MESSAGE NRJE(!:!): PDIR: HEAD=HEX'!'. ! (FMD=9073)
CAUSE A PDIR record was received. The first four bytes
are displayed in hexadecimal, the remainder in
ASCII.
ACTION
---------------------------------------------------------------------------------------
9074 MESSAGE NRJE(!:!): LU ABNORMAL TERMINATION. STACK DUMPED
TO STDLIST. (LU=9074)
CAUSE
ACTION Print STDLIST output and contact your HP
representative.
---------------------------------------------------------------------------------------
9075 MESSAGE NRJE(!:!): FMD IS RECEIVING OUTPUT FOR JOB ! ON !.
(FMD=9075)
CAUSE
ACTION
---------------------------------------------------------------------------------------
9076 MESSAGE NRJE(!:!): FMD HAS FINISHED RECEIVING OUTPUT; CPU
TIME= !; WALL TIME= !. (FMD=9076)
CAUSE The indicated CPU time is in milliseconds.
ACTION
---------------------------------------------------------------------------------------
9077 MESSAGE REQUIRED PARAMETERS NOT PASSED TO RELEASEPRINTER
(LU=9077)
CAUSE Internal software error.
ACTION
---------------------------------------------------------------------------------------
9078 MESSAGE REQUIRED PARAMETERS NOT PASSED TO RELEASEPUNCH
(LU=9078)
CAUSE Internal software error.
ACTION
---------------------------------------------------------------------------------------
9079 MESSAGE NRJE(!:!): FAILED TO OPEN OUTPUT FILE ON REMOTE
NODE: OUTPUT FILE NAME = '!' HOST JOBNUMBER = !.
OUTPUT ROUTED TO DEFAULT DESTINATION, OUTPUT
PRIORITY = 2. (LU=9079)
CAUSE A remote environment ID was specified in the Joblog
entry which was appended to the output file name by
the NRJE LU. The FOPEN of this file failed.
ACTION Refer to the message logged immediately following
this one to identify the nature of the failure. If
the NS connection to the remote system has been
lost then terminate and restart the workstation.
Contact the affected user.
---------------------------------------------------------------------------------------
9080 MESSAGE NRJE(!:!): FAILED TO READ FROM NRJE XDS (XDS=!)
(LU=9080)
CAUSE Occurs only while communicating with a JES3 host.
NRJE was attempting to obtain information about
Joblog records in the Joblog XDS by reading from
the NRJE XDS. Internal software error.
ACTION Contact Hewlett-Packard.
---------------------------------------------------------------------------------------
9081 MESSAGE NRJE(!:!): DMOVIN INTRINSIC ERROR (LU=9081)
CAUSE Access error on the Joblog buffer XDS. Internal
software error.
ACTION Contact Hewlett-Packard.
---------------------------------------------------------------------------------------
9082 MESSAGE NRJE(!:!): FAILED TO RELEASE A WRITER WHILE
PROCESSING A CANCEL REQUEST. SENSE CODE RETURNED TO
HOST=!. (LU=9082)
CAUSE NRJE could not close a non-spooled output file
while attempting to process a cancel request. NRJE
returned the indicated sense code to the host.
ACTION Refer to the message logged immediately prior to
this one to identify the nature of the failure.
---------------------------------------------------------------------------------------
9083 MESSAGE NRJE(!:!): FAILED TO OPEN OUTPUT FILE WHILE
PROCESSING A CANCEL REQUEST. SENSE CODE RETURNED TO
HOST=!. (LU=9083)
CAUSE
ACTION
---------------------------------------------------------------------------------------
9084 MESSAGE FPOINT INTRINSIC ERROR WHILE PROCESSING CANCEL
REQUEST. (LU=9084)
CAUSE FPOINT call failed even though NRJE had random
access to an output file. Internal Software error.
ACTION Contact Hewlett-Packard.
---------------------------------------------------------------------------------------
9085 MESSAGE NRJE(!:!): FREAD INTRINSIC ERROR WHILE PROCESSING
A CANCEL REQUEST. (LU=9085)
CAUSE FREAD intrinsic failed on a non-spooled file even
though NRJE had read access to the output file.
Internal software error.
ACTION Contact Hewlett-Packard.
---------------------------------------------------------------------------------------
9086 MESSAGE NRJE(!:!): WARNING: ENCOUNTERED UNEXPECTED FORMAT
CODE IN JOBLOG RECORD. FORMAT CODE = !. (LU=9086)
CAUSE A Joblog record built by the SUBMIT intrinsic
contained an invalid format code. The SUBMIT and
NRJELU software modules are incompatible.
ACTION Check NRJE versions. Reinstall NRJE.
---------------------------------------------------------------------------------------
9087 MESSAGE NRJE(!:!): FAILED TO SAVE FILE IN PERMANENT SYSTEM
DOMAIN FOR HOST JOB NUMBER: !, HOST JOB NAME = !.
DATASET DELETED. (LU=9087)
CAUSE An attempt was made to route output to a job
temporary file with a filename which duplicated
that of one in the permanent system domain. Upon
receiving the end of the dataset, NRJE will attempt
to close the output file in the system domain which
will fail.
ACTION Inform the affected user. Output files should not
be routed to the job temporary domain of NRJE.
---------------------------------------------------------------------------------------
9088 MESSAGE NRJE(!:!): WARNING: MPE ERROR ENCOUNTERED WHILE
ATTEMPTING TO STREAM OUTPUT FILE. HOST JOBNUMBER =
!, JOB NAME = !. (CIERR=!) (LU=9088)
CAUSE
ACTION
---------------------------------------------------------------------------------------
9089 MESSAGE NRJE(!:!): CAN NOT ARM "TO HOST" CONSOLE PIPE FOR
SOFTWARE INTERRUPTS. (FSERR=!) (LU=9089)
CAUSE FCONTROL with parm=48 failed on the pipe file.
ACTION Refer to the message logged immediately prior to
this one for information on FSERR. Stop the
workstation and purge any files in the group
NRJE.SYS with the names THnnnnn and FHnnnnn, then
restart the workstation. If the error is
encountered a second time, contact Hewlett-Packard
for assistance.
---------------------------------------------------------------------------------------
9090 MESSAGE NRJE(!:!): CANNOT ROUTE TO A NEW, DISC FILE
OUTSIDE OF THE SYS ACCOUNT. JOB NUMBER= !. OUTPUT
ROUTED TO DEFAULT DESTINATION WITH PRIORITY = 2.
(LU=9090)
CAUSE An attempt was made using a Lookup Table entry to
route to a new disc file outside of the SYS account
which is not allowed. NRJE cannot save new files
across account boundaries.
ACTION Delete any Lookup Table entries which attempt to
direct NRJE to build files across account
boundaries. Output should be routed to permanent
disc files built by the user if routed outside of
the SYS account. Alternately, output can be routed
to new files in the SYS account but this can be
done only once for each file. A second alternative
is to use REVERSE NRJE to stream a job which can
then build files in alternate accounts.
---------------------------------------------------------------------------------------
9091 MESSAGE NRJE(!:!): NEW DISC FILE RENAMED DUE TO DUPLICATE
PERMANENT FILE. JOB NUMBER= !. OLD FILE NAME = !.
NEW FILE NAME = !. (LU=9091)
CAUSE NRJE could not save a new disc file in the
permanent domain due to a duplicate permanent file
which already existed by this name. NRJE therefore
saved the file with the new name of NRJEnnnn where
nnnn represents the time (hours/minutes) at which
the file was renamed.
ACTION If a dataset is to be routed on a continual basis
to the permanent disc domain then it should be
routed to a permanent disc file. Replace the
offending entry in the Lookup Table with one which
uses the default domain of "old, permanent".
---------------------------------------------------------------------------------------
9092 MESSAGE NRJE(!:!): FAILED TO RENAME OUTPUT FILE. JOB
NUMBER = !. NEW NAME ATTEMPTED = !. (LU=9092)
CAUSE Output was routed to a new disc file which could
not be closed to the permanent domain due to a
duplicate permanent file of the same name. NRJE
attempted to rename the output file to NRJEnnnn but
this rename failed. The output for the data set
was lost.
ACTION If a dataset is to be routed on a continual basis
to the permanent disc domain then it should be
routed to a permanent disc file. Replace the
offending entry in the Lookup Table with one which
uses the default domain of "old, permanent".
---------------------------------------------------------------------------------------
9093 MESSAGE NRJE(!:!): FAILED TO LOCK NRJE XDS. STATUS=!
(LU=9093)
CAUSE Internal error.
ACTION Contact Hewlett-Packard.
---------------------------------------------------------------------------------------
9094 MESSAGE NRJE(!:!): FAILED TO READ FROM NRJE XDS. STATUS=!
(LU=9094)
CAUSE Internal error.
ACTION Contact Hewlett-Packard.
---------------------------------------------------------------------------------------
9095 MESSAGE NRJE(!:!); FAILED TO WRITE TO NRJE XDS. STATUS=!
(LU=9095)
CAUSE Internal error.
ACTION Contact Hewlett-Packard.
---------------------------------------------------------------------------------------
9096 MESSAGE NRJE(!:!): FAILED TO UNLOCK NRJE XDS. STATUS=!
(LU=9096)
CAUSE Internal error.
ACTION Contact Hewlett-Packard.
---------------------------------------------------------------------------------------
9097 MESSAGE NRJE(!:!): FAILED TO CREATE IOWAIT PORT. STATUS=!
(LU=9097)
CAUSE NRJE could not obtain a port for interprocess
communication using the CREATIOWAITPORT system
procedure. Internal error.
ACTION Contact Hewlett-Packard.
---------------------------------------------------------------------------------------
9098 MESSAGE NRJE(!:!): IOWAIT COMPLETION ERROR. FSERR=!
(LU=9098)
CAUSE The IOWAIT intrinsic return CCL. Internal error.
ACTION Refer to the message logged immediately prior to
this one for additional information on the file
system error. Contact Hewlett-Packard.
---------------------------------------------------------------------------------------
9100 MESSAGE NRJE(!:!): ATTEMPT TO RELEASE CONSOLE WHEN IT IS
NOT OWNED (LU=9100)
CAUSE An NRJE LU attempted to release the console
facility when it was owned by another LU. Internal
error.
ACTION Contact Hewlett-Packard
---------------------------------------------------------------------------------------
9101 MESSAGE NRJE(!:!): ATTEMPT TO OBTAIN CONSOLE DATA WHEN NO
DATA IS PENDING (LU=9101)
CAUSE An NRJE LU attempted to access the "to host"
console pipe to retrieve data without receiving a
message indicating that console data was present.
Internal error.
ACTION Contact Hewlett-Packard.
---------------------------------------------------------------------------------------
9102 MESSAGE NRJE(!:!): WARNING: OUT OF MESSAGE FRAMES FOR
REMOTE CONSOLE FACILITY; (NUM FREE=!) (NUM
NEEDED=!) (LU=9102)
CAUSE An NRJE LU has console data from the host to
deliver to one or more console users but the number
of available message frames in the ports facility
is insufficient. This message is repeated every 60
seconds until sufficient message frames become
available. All NRJE activity will suspend until
the console message can be delivered.
ACTION Check any application programs which may have
opened the console (with NRJEConsole) but has
failed to receive messages using the NRJERcvMsg
intrinsic.
---------------------------------------------------------------------------------------
9103 MESSAGE NRJE(!:!): INTRINSIC ERROR (INTR=!) (LU=9103)
CAUSE A call to an NRJE intrinsic (such as NRJEConsole)
failed.
ACTION
---------------------------------------------------------------------------------------
9104 MESSAGE NRJE(!:!): CANNOT OPEN 'TEMP STORAGE' DISC FILE.
(LU=9104)
CAUSE FOPEN returned CCL on a the file.
ACTION Refer to the preceding file system error message
logged by NRJE.
---------------------------------------------------------------------------------------
9105 MESSAGE NRJE(!:!): FATAL ERROR WHILE ATTEMPTING TO ACCESS
AN OUTPUT SPOOLFILE. (STATUS=!) (LU=9105)
CAUSE File system error occurred on the output file.
ACTION Refer to the preceding file system error message
logged by NRJE.
---------------------------------------------------------------------------------------
9106 MESSAGE NRJE(!:!): INTERNAL ERROR WHILE ACCESSING OUTPUT
SPOOLFILE. (LU=9106)
CAUSE NRJE cannot setup for multirecord access to an
output spool file.
ACTION Refer to the file system error message logged
immediately prior to this message.
---------------------------------------------------------------------------------------
9107 MESSAGE NRJE(!:!): WARNING: CANNOT ALTER PRIORITY OF
OUTPUT SPOOLFILE. (LU=9107)
CAUSE NRJE could not temporarily change the priority of
an output spool file to 1 while attempting to set
up for multi-record access to the output spool
file.
ACTION Contact Hewlett-Packard.
---------------------------------------------------------------------------------------
9108 MESSAGE NRJE(!:!): CANNOT CHANGE STATE AND PRIORITY OF
OUTPUT SPOOLFILE. (SPOOLER=!) (LU=9108)
CAUSE The system procedure NRJESPOOLALTER returned
non-zero status while attempting to reset the
output spool file priority and change its state to
OPENED.
ACTION Contact Hewlett-Packard.
---------------------------------------------------------------------------------------
9109 MESSAGE NRJE(!:!): FAILED TO CHANGE STATE OF AN OUTPUT
SPOOLFILE. (SPOOLER=!) (LU=9109)
CAUSE The system procedure NRJESPOOLALTER returned
non-zero status while attempting to change the
state of an output spool file to READY.
ACTION Contact Hewlett-Packard.
---------------------------------------------------------------------------------------
9110 MESSAGE NRJE(!:!): NUMBER OF PIU SEGMENTS RECEIVED = !;
NUMBER OF RU'S = !; NUMBER OF RECORDS = !.
(LU=9110)
CAUSE
ACTION
---------------------------------------------------------------------------------------
9111 MESSAGE NRJE(!:!): THROUGHPUT = ! RU'S/SECOND; !
RECORDS/SECOND OUTPUT MODE = !. (LU=9111)
CAUSE
ACTION
---------------------------------------------------------------------------------------
9112 MESSAGE NRJE(!:!): CPU LOAD = ! CPU MSECS/RU; CPU
LOAD/LINE = ! CPU MSECS/LINE; CPU UTILIZATION = !
CPU BUSY. (LU=9112)
CAUSE
ACTION
---------------------------------------------------------------------------------------
10000 MESSAGE NRJE: XDS ACCESS ERROR WHILE RELEASING CONSOLE FOR
WORKSTATION NUMBER !; PIN=!; (XDS STATUS=!)
(INTR=10000)
CAUSE While releasing the console the access portid in
the NRJE extra data segment could not be released.
May have occurred while a system shutdown was in
progress.
ACTION Contact Hewlett-Packard.
---------------------------------------------------------------------------------------
10001 MESSAGE NRJE: WARNING: CONSOLE ACCESS PORTID NOT FOUND IN
NRJE XDS FOR WORKSTATION NUMBER !; PIN=!;
(INTR=10001)
CAUSE A user in the host console facility released the
console but the console access portid could not be
found in the NRJE extra data segment. May have
resulted from a workstation terminating just prior
to the user attempting to release the console.
ACTION Check preceding log messages to determine if a
workstation had just terminated.
---------------------------------------------------------------------------------------
15001 MESSAGE ILLEGAL STRING ITEM (SEV=15001).
CAUSE
ACTION
---------------------------------------------------------------------------------------
15002 MESSAGE ILLEGAL SPOOL FILE INDEX (SEV=15002).
CAUSE
ACTION
---------------------------------------------------------------------------------------
15003 MESSAGE NONEXISTENT DEVICE (SPOOLER=15003).
CAUSE
ACTION
---------------------------------------------------------------------------------------
15004 MESSAGE ILLEGAL STRING ITEMS COUNT (SEV=15004).
CAUSE
ACTION
---------------------------------------------------------------------------------------
15005 MESSAGE ILLEGAL NEW ITEM VALUE (SEV=15005).
CAUSE
ACTION
---------------------------------------------------------------------------------------
15006 MESSAGE ILLEGAL SPOOL FILE QUEUE (SEV=15006).
CAUSE
ACTION
---------------------------------------------------------------------------------------
15007 MESSAGE ILLEGAL DEVICE (SPOOLER=15007).
CAUSE
ACTION
---------------------------------------------------------------------------------------
15008 MESSAGE ILLEGAL CLASSNAME (SPOOLER=15008).
CAUSE
ACTION
---------------------------------------------------------------------------------------