HP 3000 Manuals HP 3000 Manuals
SNA NRJE Logging Messages (continued)
---------------------------------------------------------------------------------------
7009 MESSAGE NRJE(!;!): NEGATIVE RESPONSE TO CANCEL RECEIVED
(SEV=7009)
CAUSE
ACTION
---------------------------------------------------------------------------------------
7010 MESSAGE NRJE(!;!): NEGATIVE RESPONSE TO SHUTC RECEIVED
(SEV=7010)
CAUSE
ACTION
---------------------------------------------------------------------------------------
7011 MESSAGE NRJE(!;!): ILLEGAL RESPONSE TO SHUTD RECEIVED
(SEV=7011)
CAUSE
ACTION
---------------------------------------------------------------------------------------
7012 MESSAGE NRJE(!;!): ILLEGAL RESPONSE TO DFC REQUEST
RECEIVED (SEV=7012)
CAUSE
ACTION
---------------------------------------------------------------------------------------
7013 MESSAGE NRJE(!;!): ILLEGAL RESPONSE TO CHASE RECEIVED
(SEV=7013)
CAUSE
ACTION
---------------------------------------------------------------------------------------
7015 MESSAGE NRJE(!;!): HDX/FF ERROR; RESPONSE RECEIVED
(SEV=7015)
CAUSE
ACTION
---------------------------------------------------------------------------------------
7016 MESSAGE NRJE(!;!): ILLEGAL CANCEL RECEIVED; BIU= !
(SEV=7016)
CAUSE
ACTION
---------------------------------------------------------------------------------------
7017 MESSAGE NRJE(!;!): EC MISSING ON OUTBOUND FMH (SEV=7017)
CAUSE
ACTION
---------------------------------------------------------------------------------------
7018 MESSAGE NRJE(!;!): HOST RESPONSE LACKS EC (SEV=7018)
CAUSE
ACTION
---------------------------------------------------------------------------------------
7019 MESSAGE NRJE(!;!): HDX/FF ERROR ON OUTBOUND RESPONSE
(SEV=7019)
CAUSE
ACTION
---------------------------------------------------------------------------------------
7020 MESSAGE NRJE(!;!): HDX/FF ERROR ON OUTBOUND REQUEST
(SEV=7020)
CAUSE
ACTION
---------------------------------------------------------------------------------------
7021 MESSAGE NRJE(!;!): ILLEGAL FMD RESPONSE (SEV=7021)
CAUSE
ACTION
---------------------------------------------------------------------------------------
7022 MESSAGE NRJE(!;!): XDS WRITE FAILURE; CODE= ! (SEV=7022)
CAUSE
ACTION
---------------------------------------------------------------------------------------
7023 MESSAGE NRJE(!;!): INVALID SEND CODE; BIU= ! (SEV=7023)
CAUSE
ACTION
---------------------------------------------------------------------------------------
7024 MESSAGE NRJE(!;!): INVALID SENT CODE; BIU= ! (SEV=7024)
CAUSE
ACTION
---------------------------------------------------------------------------------------
7025 MESSAGE NRJE(!;!): UNSUPPORTED SIGNAL CODE RECEIVED; BIU=
! (DFC=7025)
CAUSE
ACTION
---------------------------------------------------------------------------------------
7026 MESSAGE NRJE(!;!): NXDSLOCK FAILED (SEV=7026)
CAUSE
ACTION
---------------------------------------------------------------------------------------
7027 MESSAGE NRJE(!;!): NXDSREAD FAILED (SEV=7027)
CAUSE
ACTION
---------------------------------------------------------------------------------------
7028 MESSAGE NRJE(!;!): NXDSUNLOCK FAILED (SEV=7028)
CAUSE
ACTION
---------------------------------------------------------------------------------------
7029 MESSAGE NRJE(!;!): NXDSLOCK FAILED (SEV=7029)
CAUSE
ACTION
---------------------------------------------------------------------------------------
7030 MESSAGE NRJE(!;!): NXDSREAD FAILED (SEV=7030)
CAUSE
ACTION
---------------------------------------------------------------------------------------
7031 MESSAGE NRJE(!;!): NXDSWRITE FAILED (SEV=7031)
CAUSE
ACTION
---------------------------------------------------------------------------------------
7032 MESSAGE NRJE(!;!): NXDSUNLOCK FAILED (SEV=7032)
CAUSE
ACTION
---------------------------------------------------------------------------------------
7033 MESSAGE NRJE(!;!): NXDSWRITE FAILED (SEV=7033)
CAUSE
ACTION
---------------------------------------------------------------------------------------
7700 MESSAGE NRJE(!;!): NMCONFIG FILE RU DATA READ FAILED
(SEV=7700)
CAUSE
ACTION
---------------------------------------------------------------------------------------
7701 MESSAGE NRJE(!;!): NMCONFIG FILE RDR DATA READ FAILED
(SEV=7701)
CAUSE
ACTION
---------------------------------------------------------------------------------------
7998 MESSAGE NRJE(!;!): LU OUT OF BUFFERS (SEV=7998)
CAUSE
ACTION
---------------------------------------------------------------------------------------
7999 MESSAGE NRJE(!;!): INVALID BUFFER LENGTH (SEV=7999)
CAUSE
ACTION
---------------------------------------------------------------------------------------
8001 MESSAGE NRJE(!;!): SNACLOSEUSER FAILED; RESULT=!
(LUX=8001)
CAUSE
ACTION
---------------------------------------------------------------------------------------
8002 MESSAGE NRJE(!;!): AUTORECOVERY CONFIGURATION CHECK
FAILED; RESULT=! (LUX=8002)
CAUSE
ACTION
---------------------------------------------------------------------------------------
8003 MESSAGE NRJE(!;!): SNARCV FAILED ON RECOVERY; RESULT=!
(LUX=8003)
CAUSE
ACTION
---------------------------------------------------------------------------------------
8004 MESSAGE NRJE(!;!): NAU FAILED TO ACTIVATE ON RECOVERY;
RESULT=! (LUX=8004)
CAUSE
ACTION
---------------------------------------------------------------------------------------
8005 MESSAGE NRJE(!;!): SNAOPENUSER FAILED; RESULT=!
(LUX=8005)
CAUSE
ACTION
---------------------------------------------------------------------------------------
9000 MESSAGE NRJE(!:!): WARNING: FAILURE TO LOAD WRITER EXIT
PROCEDURE: '!'. INTERNAL BANNER DECODE ROUTINE
WILL BE USED. (LOAD ERR=!) (LU=9000)
CAUSE NRJE was configured to use an external procedure
for a logical writer but the attempt to load the
procedure failed.
ACTION Refer to the MPE Intrinsics Reference Manual for
information on LOAD ERR.
Ensure that the exit procedure is in SL.NRJE.SYS or
SL.PUB.SYS and that the Writer Data screen
indicates the correct procedure name. Ensure that
the RUN command in the NRJE stream file runs the
NRJEMON program with "LIB=G".
---------------------------------------------------------------------------------------
9001 MESSAGE NRJE(!:!): FAILED TO ACCESS CONFIGURATION FILE.
(CFG=!) (LU=9001)
CAUSE NRJE failed to access the MIDAS database which
returned an error number of 'CFG'.
ACTION Ensure that the configuration file exists as
NMCONFIG.PUB.SYS. It may be necessary to convert
the configuration file to a new format by running
the Node Management Services conversion utility
NMMGRVER.
---------------------------------------------------------------------------------------
9002 MESSAGE NRJE(!:!): WARNING: COULD NOT LOAD CONSOLE EXIT
PROCEDURE. INTERNAL DECODE ROUTINE WILL BE USED.
(LOAD ERR=!) (LU=9002)
CAUSE NRJE encountered a loadproc error while attempting
to load the console exit procedure.
ACTION Ensure that the procedure name in the Workstation
Data screen is correct and that the procedure
exists in SL.NRJE.SYS or SL.PUB.SYS. Ensure that
the RUN command of the NRJE Stream file runs the
NRJEMON program with "LIB=G".
---------------------------------------------------------------------------------------
9003 MESSAGE NRJE(!:!): FAILED TO LOCK LU'DUMP'RIN. (LU=9003)
CAUSE Internal software error. Logged only while
aborting due to a more serious error.
ACTION None.
---------------------------------------------------------------------------------------
9004 MESSAGE NRJE(!:!): FAILURE TO OPEN JOBLOG FILE (LU=9004)
CAUSE An FOPEN error occurred on the Joblog file.
ACTION Check the preceding error message which will
identify the nature of the fopen failure. Ensure
that Workstation Data screen correctly identifies
the name of the Joblog in the NRJE group of the SYS
account. Ensure that all NRJE module versions are
compatible.
---------------------------------------------------------------------------------------
9005 MESSAGE NRJE(!:!): FAILED TO WRITE TO NRJE XDS (XDS=!)
(LU=9005)
CAUSE Access error occurred while attempting to save the
Joblog record length value in the NRJE XDS. An
internal software error.
ACTION Contact Hewlett-Packard for assistance.
---------------------------------------------------------------------------------------
9006 MESSAGE NRJE(!:!): FAILED TO OPEN JOB, TEMP COPY OF LOOKUP
TABLE (FSERR=!) (LU=9006)
CAUSE FOPEN failure on the internal job temporary copy of
the Lookup Table.
ACTION Ensure that NRJE versions are correct. If versions
are compatible, contact Hewlett-Packard for
assistance.
---------------------------------------------------------------------------------------
9007 MESSAGE NRJE(!:!): FAILED TO ACQUIRE FORMID XDS (LU=9007)
CAUSE A GETDSEG failure was encountered.
ACTION Ensure that NRJE versions are compatible. Ensure
that the system configuration for "MAXIMUM NUMBER
OF EXTRA DATA SEGMENTS/PROCESS" is greater than 4.
---------------------------------------------------------------------------------------
9008 MESSAGE NRJE(!:!): FAILED TO WRITE TO NRJE XDS (XDS=!)
(LU=9008)
CAUSE NRJE could not zero out the length field for the
Joblog record in the NRJE XDS. Internal software
error.
ACTION Contact Hewlett-Packard.
---------------------------------------------------------------------------------------
9009 MESSAGE NRJE(!:!): READ ERROR ON SUBMITTED SPOOLFILE
(SPOOLER=!) (LU=9009)
CAUSE NRJE encountered an error while attempting to copy
a file from the NRJE reader to the host.
ACTION Ensure that the NRJE Reader is properly configured
into the MPE I/O configuration. Ensure that NRJE
versions are correct.
---------------------------------------------------------------------------------------
9010 MESSAGE NRJE(!:!): WARNING: NRJE READER RELEASED WHILE
WAITING FOR 'ON READER' MESSAGE FROM HOST. OUTPUT
WILL BE UNSOLICITED (LU=9010)
CAUSE NRJE submitted a job to the host and was waiting
for the host "ON READER" message which would inform
NRJE of the host job number when NRJE received a
command to terminate communication with the host.
Termination may have been due to any number of
causes including receiving an unexpected "UNBIND",
a communications line failure, or a "KILL" command
issued by the node manager.
ACTION None.
---------------------------------------------------------------------------------------
9011 MESSAGE NRJE(!:!): FAILED TO WRITE TO JOBLOG XDS (LU=9011)
CAUSE A DMOVOUT error occurred while attempting to save
the Joblog record in the Joblog extra data segment.
An internal software error.
ACTION Contact Hewlett-Packard for assistance.
---------------------------------------------------------------------------------------
9012 MESSAGE NRJE(!:!): FAILED TO READ FROM JOBLOG XDS
(STATUS=!) (LU=9012)
CAUSE
ACTION
---------------------------------------------------------------------------------------
9013 MESSAGE NRJE(!:!): WARNING: INVALID FILE NUMBER RETURNED
BY WRITER EXIT PROCEDURE. (FSERR=!) (LU=9013)
CAUSE An exit procedure for a writer returned a non-zero
value for file number. An FCHECK was executed on
this file number and non-zero error value returned
as FSERR.
ACTION Correct the exit procedure.
---------------------------------------------------------------------------------------
9014 MESSAGE NRJE(!:!): FAILED TO READ FROM JOBLOG XDS (XDS=!)
(LU=9014)
CAUSE NRJE failed to read the length value of the Joblog
record from the NRJE XDS. Internal software error.
ACTION Contact Hewlett-Packard
---------------------------------------------------------------------------------------
9015 MESSAGE NRJE(!:!): FAILED TO LOAD NATIVE-3000 TRANSLATION
TABLE (NLERR=!) (LU=9015)
CAUSE NRJE Failed to execute the NLINFO intrisic which
returned an error code of NLERR.
ACTION Refer to the Native Language Support Reference
Manual for information on NLERR.
---------------------------------------------------------------------------------------
9016 MESSAGE NRJE(!:!): FAILED TO ACQUIRE JOBLOG XDS (LU=9016)
CAUSE NRJE encountered a GETDSEG intrinsic failure while
attempting to acquire the Joblog buffer XDS.
ACTION Ensure that MPE is configured for a MAXIMUM NUMBER
OF EXTRA DATA SEGMENTS PER PROCESS of 5 or more.
Check NRJE versions for compatibility.
---------------------------------------------------------------------------------------
9017 MESSAGE NRJE(!:!): WARNING: COULD NOT LOAD WRITER
TRANSLATION TABLE. NATIVE LANGUAGE ID=!. WILL USE
NATIVE-3000 TRANSLATION TABLE. (NLERR=!) (LU=9017)
CAUSE NRJE failed to execute the NLINFO intrinsic.
ACTION Consult the Native Language Support Reference
Manual for information regarding the NLERR error
number.
---------------------------------------------------------------------------------------
9018 MESSAGE NRJE(!:!): WARNING: COULD NOT LOAD READER
TRANSLATION TABLE FOR LANGUAGE ID=!. WILL USE
NATIVE-3000 TRANSLATION TABLE. (NLERR=!) (LU=9018)
CAUSE NRJE failed to execute the NLINFO intrinsic.
ACTION Consult the Native Language Support Reference
Manual for information regarding the NLERR error
number.
---------------------------------------------------------------------------------------
9019 MESSAGE NRJE(!:!): WARNING: JOBNAMES IN HOST 'ON READER'
MESSAGE AND 'SUBMIT INTRINSIC' MESSAGE DID NOT
AGREE FOR HOST JOB NUMBER !. SUBMIT JOBNAME OF '!'
WAS REPLACED BY HOST JOBNAME OF '!'. (LU=9019)
CAUSE The NRJE SUBMIT intrinsic parsed the users
submitted job and identified the name of the job
but the parsing done by the host yielded a
different job name (this job name is sent to NRJE
in the 'ON READER' message).
ACTION Contact Hewlett-Packard.
---------------------------------------------------------------------------------------
9020 MESSAGE NRJE(!:!): FLOCK FAILURE ON JOBLOG FILE (LU=9020)
CAUSE NRJE failed to execute the FLOCK intrinsic.
ACTION Ensure that NRJE versions are compatible. Contact
Hewlett-Packard.
---------------------------------------------------------------------------------------
9021 MESSAGE NRJE(!:!): FAILED TO EXECUTE FFINDBYKEY INTRINSIC
ON JOBLOG (LU=9021)
CAUSE NRJE could not execute FFINDBYKEY on the Joblog
while in error recovery mode for a DUPLICATE 'KEY'
VALUE (FSERR 171) error on the Joblog.
ACTION Refer to the preceding error message for the nature
of the file system error. Contact Hewlett-Packard.
---------------------------------------------------------------------------------------
9022 MESSAGE NRJE(!:!): FAILED TO UPDATE JOBLOG FILE (LU=9022)
CAUSE An FUPDATE intrinsic error occurred.
ACTION Refer to the preceding error message for the nature
of the file system error. Contact Hewlett-Packard.
---------------------------------------------------------------------------------------
9023 MESSAGE NRJE(!:!): FAILED TO WRITE TO JOBLOG FILE
(LU=9023)
CAUSE An FWRITE intrinsic error occurred on the Joblog.
ACTION Refer to the following message for the file system
error number. Contact Hewlett-Packard.
---------------------------------------------------------------------------------------
9024 MESSAGE NRJE(!:!): WARNING: UNSOLICITED 'ON READER'
MESSAGE RECEIVED. (LU=9024)
CAUSE The host sent the 'ON READER' message indicating
that a job was on one of NRJE's readers but NRJE
did not have a job active on a reader. The message
is ignored. This may occur upon signing on to the
host after having previously terminating a
connection abnormally. When an abnormal
termination occurs, there may be console messages
queued up for transmission to the remote console
which will be sent when the remote signs on again.
ACTION None.
---------------------------------------------------------------------------------------
9025 MESSAGE NRJE(!:!): FAILED TO READ FROM JOBLOG XDS
(LU=9025)
CAUSE Error occurred in the DMOVIN intrinsic while
attempting to obtain a record from the Joblog
buffer.
ACTION Check NRJE versions. Contact Hewlett-Packard.
---------------------------------------------------------------------------------------
9026 MESSAGE NRJE(!:!): FAILED TO UNLOCK NRJE XDS (XDS=!).
(LU=9026)
CAUSE Error encountered in NXDSUNLOCK.
ACTION Contact Hewlett-Packard.
---------------------------------------------------------------------------------------
9027 MESSAGE NRJE(!:!): FAILED TO LOCK NRJE XDS (XDS=!)
(LU=9027)
CAUSE Error encountered in NXDSLOCK.
ACTION Contact Hewlett-Packard.
---------------------------------------------------------------------------------------
9028 MESSAGE NRJE(!:!): FAILED TO WRITE TO NRJE XDS (XDS=!)
(LU=9028)
CAUSE Error encountered in NXDSWRITENL while attempting
to store the LU's PIN in the XDS to reserve a
reader.
ACTION Contact Hewlett-Packard.
---------------------------------------------------------------------------------------
9029 MESSAGE NRJE(!:!): FAILED TO OPEN BANNER FILE (FSERR=!)
(LU=9029)
CAUSE FOPEN failed while attempting to open the internal
banner file (used to save host banners until banner
decode succeeds).
ACTION The preceding error message will indicate the
nature of the file system error. The LU name is
used as the file name of the banner file. Ensure
that the LU name is a valid MPE file name.
---------------------------------------------------------------------------------------
9030 MESSAGE NRJE(!:!): FAILED TO OPEN PUNCH OUTPUT FILE FOR
HOST JOB NAME '!'. SENSE CODE RETURNED TO HOST =!
(LU=9030)
CAUSE The Output Destination identified in the NRJE
Configuration: Writer Data screen could not be
opened. One or more messages logged prior to this
message identify the nature of the failure.
ACTION Refer to the message(s) preceding this one to
identify the nature of the failure. Correcting the
problem will usually require either (1)
reconfiguring the Writer Data screen, or (2)
recovering lost disc space.
---------------------------------------------------------------------------------------
9031 MESSAGE NRJE(!:!): FAILED TO OPEN PRINT OUTPUT FILE FOR
HOST JOB NAME '!'. SENSE CODE RETURNED TO HOST =!
(LU=9031)
CAUSE The Output Destination identified in the NRJE
Configuration: Writer Data screen could not be
opened. One or more messages logged prior to this
message identify the nature of the failure.
ACTION Refer to the message(s) preceding this one to
identify the nature of the failure. Correcting the
problem will usually require either (1)
reconfiguring the Writer Data screen, or (2)
recovering lost disc space.
---------------------------------------------------------------------------------------
9032 MESSAGE NRJE(!:!): FAILED TO READ FROM FORMID XDS
(LU=9032)
CAUSE DMOVIN failure occurred while attempting to lookup
a form name in the FORMID XDS.
ACTION Check NRJE versions. Contact Hewlett-Packard.
---------------------------------------------------------------------------------------
9033 MESSAGE NRJE(!:!): FPOINT FAILURE ON LOOKUP TABLE
(FSERR=!) (LU=9033)
CAUSE A formid was found in the Lookup Table XDS but the
applicable record in the internal temporary copy of
the Lookup Table could not be referenced.
ACTION Refer to the preceding message for a description of
FSERR. Contact Hewlett-Packard.
---------------------------------------------------------------------------------------
9034 MESSAGE NRJE(!:!): WARNING: FAILED TO PARSE 'ON READER'
MESSAGE: ! INVALID READER NUMBER DETECTED = !.
(LU=9034)
CAUSE NRJE received what looked like an "ON READER"
message but could not correctly identify the reader
number in the message (valid reader number range is
1 to 7). If an actual "ON READER" message was
received, then this reader will be unavailable for
further job submissions.
ACTION If the message is in fact an "ON READER" message
then determine whether the format of the message
has been modified by host system programmers. If
the message has not been modified, contact
Hewlett-Packard for assistance. If the message has
been modified, install an exit procedure to parse
the message. Refer to the NRJE User/Programmer
Reference Manual for additional information.
---------------------------------------------------------------------------------------
9035 MESSAGE NRJE(!:!): MEDIUM NOT PASSED TO GETWRITER.
(LU=9035)
CAUSE GETWRITER was not passed a required parameter.
ACTION Contact Hewlett-Packard.
---------------------------------------------------------------------------------------
9036 MESSAGE NRJE(!:!): REQUIRED PARAMETERS NOT PASSED TO
SET'OUTPUT'PARMS (LU=9036)
CAUSE FNUM or STATUS not passed to SET'OUTPUT'PARMS.
ACTION Contact Hewlett-Packard.
---------------------------------------------------------------------------------------
9037 MESSAGE NRJE(!:!): FAILED TO OPEN $NULL FILE (LU=9037)
CAUSE A user wants to cancel his output, causing NRJE to
route the output to $NULL which could not be
opened.
ACTION Contact Hewlett-Packard.
---------------------------------------------------------------------------------------
9038 MESSAGE NRJE(!:!): WARNING: USER ATTEMPTED TO ACCESS A
LOOKUP TABLE ENTRY WHEN THE LOOKUP TABLE WAS NOT IN
USE. JOBNUMBER=! USER ID =!. (LU=9038)
CAUSE A user submitted a job specifying an alternate
formid in the Lookup Table (for example, SUBMIT
job;FO='formid') but NRJE is not configured to use
a Lookup Table (Workstation Data screen).
ACTION Contact the affected user.
---------------------------------------------------------------------------------------
9039 MESSAGE NRJE(!:!): WARNING: INVALID OUTPUT ROUTING OPTION
SPECIFIED FOR JOB NUMBER !. (LU=9039)
CAUSE A user specified an invalid routing option for
print, punch, or forms disposition. Output was
routed to the default destination identified in the
Writer Data screen. Message number 9050 will be
logged immediately following this message
identifying the affected user and jobname.
ACTION Contact the affected user.
---------------------------------------------------------------------------------------
9040 MESSAGE NRJE(!:!): FAILED TO EXECUTE MPE 'FILE' COMMAND.
COMMAND PARM ERROR = !. ATTEMPTED THE FOLLOWING
FILE COMMAND: '!' (LU=9040)
CAUSE File equation identified in the message could not
be executed. Message number 335 preceded this
message identifying the nature of the error.
The file equation came from one of two sources:
(1) Lookup Table entry, or (2) user-specified file
equation (for example, SUBMIT job;FO=*fileq)
ACTION If source of the record was a Lookup Table entry,
correct the entry and retry. Use the VERIFY
command to check each record. If the source was a
user specified file equation, contact the affected
user.
---------------------------------------------------------------------------------------
9042 MESSAGE NRJE(!:!): FAILED TO READ FROM LOOKUP TABLE
(FSERR=!) (LU=9042)
CAUSE FREAD intrinsic failure on the internal temporary
copy of the Lookup Table.
ACTION Contact Hewlett-Packard.
---------------------------------------------------------------------------------------
9043 MESSAGE NRJE(!:!): FAILED TO READ FROM FORMID XDS
(LU=9043)
CAUSE DMOVIN failure on the formid XDS.
ACTION Contact Hewlett-Packard.
---------------------------------------------------------------------------------------
9044 MESSAGE NRJE(!:!): WARNING: FORMID NOT FOUND IN LOOKUP
TABLE. FORM '!' WAS REQUESTED BY JOB NUMBER ! (JOB
NAME= !) OUTPUT ROUTED TO THE DEFAULT DESTINATION,
OUTPUT PRIORITY = 2. (LU=9044)
CAUSE A user specified a form name which could not be
found in the Lookup Table.
ACTION Contact the affected user. Ensure that all users
are informed of all form names supported by the
workstation.
---------------------------------------------------------------------------------------
9046 MESSAGE NRJE(!:!): FAILED TO LOCK LOCAL RIN (LU=9046)
CAUSE Failed to execute LOCKLOCRIN. Possibly due to a
failure by NRJEMON to acquire the local rin.
ACTION Check NRJE versions. Ensure that NRJEMON and
NRJELU versions are compatible. Contact
Hewlett-Packard.
---------------------------------------------------------------------------------------
9049 MESSAGE NRJE(!:!): FILE SYSTEM ERROR OCCURRED ON '!':
'!.' (LU=9049)
CAUSE As above.
ACTION Depends upon the nature of the failure. Refer to
other messages logged immediately prior to and
after this message for corrective action.
---------------------------------------------------------------------------------------