HP 3000 Manuals HP 3000 Manuals
SNA NRJE Logging Messages
Listed below are the SNA NRJE messages that are logged in the log
destination configured for your workstation in the Joblog Data File field
of the NRJE Configuration: Workstation Data Page 2 screen. They are
listed in numerical order according to the number in the message suffix;
if more than one suffix is displayed, the message is listed here
according to the number in the last suffix. These messages are not
written to $STDLIST. Note that online help is not available for these
messages. (See the beginning of this appendix.)
Message Prefixes
LU processes add this prefix to some logging messages:
NRJE(Wsid;LUClassName)
---------------------------------------------------------------------------------------
325 MESSAGE MISSING PARM FOR 'RELOAD TABLE' ROUTINE. WSID=!
(INT=325)
CAUSE
ACTION
---------------------------------------------------------------------------------------
327 MESSAGE NRJE(!): CANNOT BUILD JOBLOG DUE TO A
CONFIGURATION ERROR. (CFG=!). (MON=!). (INT=327)
CAUSE
ACTION
---------------------------------------------------------------------------------------
330 MESSAGE NRJE(!): CONFIGURATION ACCESS ERROR OBTAINING
LOOKUP TABLE NAME (CFG=!) (INT=330)
CAUSE
ACTION
---------------------------------------------------------------------------------------
331 MESSAGE NRJE(!): INTERNAL ERROR WHILE RELOADING TABLE.
(STATUS=!) (FSERR=!) (INT=331)
CAUSE
ACTION
---------------------------------------------------------------------------------------
332 MESSAGE FAILED TO OPEN 'CATALOG.PUB.SYS'. !. (INT=332)
CAUSE
ACTION
---------------------------------------------------------------------------------------
333 MESSAGE FAILED TO EXECUTE GENMESSAGE INTRINSIC ON
'CATALOG.PUB.SYS' NRJE SET NUM = !. NRJE ERROR =!.
GENMESSAGE ERROR CODE = !. (INT=333)
CAUSE
ACTION
---------------------------------------------------------------------------------------
335 MESSAGE MPE ERROR ENCOUNTERED: '!' (INT=335)
CAUSE
ACTION
---------------------------------------------------------------------------------------
358 MESSAGE THE LU IS NOT ACTIVE. (INT=358)
CAUSE A control command sent to an LU cannot be processed
because the LU is not active.
ACTION Use the STATUS command to verify the state of the
LU.
---------------------------------------------------------------------------------------
411 MESSAGE OFFSET MUST BE 0 OR POSITIVE. (SEV=411)
CAUSE
ACTION
---------------------------------------------------------------------------------------
412 MESSAGE BUFFER SIZE IS TOO SMALL. (SEV=412)
CAUSE
ACTION
---------------------------------------------------------------------------------------
413 MESSAGE AT LEAST ONE OF THE PARAMETERS IS OUT OF BOUNDS.
(SEV=413)
CAUSE
ACTION
---------------------------------------------------------------------------------------
414 MESSAGE WRONG INPUT IN NXDSREAD OR NXDSWRITE. (SEV=414)
CAUSE
ACTION
---------------------------------------------------------------------------------------
415 MESSAGE NOT ENOUGH STACK SPACE. (MAN=415)
CAUSE
ACTION
---------------------------------------------------------------------------------------
422 MESSAGE A SEVERE ERROR OCCURRED IN THE DICTIONARY
SUBSYSTEM. (SEV=422)
CAUSE
ACTION
---------------------------------------------------------------------------------------
423 MESSAGE A SEVERE ERROR OCCURRED IN NODE MANAGEMENT.
(SEV=423)
CAUSE
ACTION
---------------------------------------------------------------------------------------
424 MESSAGE A SEVERE ERROR: WORKSTATION HAS AN UNDEFINED STATE.
(SEV=424)
CAUSE
ACTION
---------------------------------------------------------------------------------------
425 MESSAGE XDS ACCESS ERROR: NRJE XDS DOES NOT EXIST.
(SEV=425)
CAUSE
ACTION
---------------------------------------------------------------------------------------
426 MESSAGE ATTEMPT TO UNLOCK XDS BY ANOTHER PIN. (SEV=426)
CAUSE
ACTION
---------------------------------------------------------------------------------------
427 MESSAGE ATTEMPT TO LOCK XDS WHEN LOCKED BY SAME PIN.
(SEV=427)
CAUSE
ACTION
---------------------------------------------------------------------------------------
428 MESSAGE NO ROOM FOR AN NRJE XDS DST ENTRY. (SEV=428)
CAUSE
ACTION
---------------------------------------------------------------------------------------
429 MESSAGE NO SWAP SPACE FOR AN NRJE XDS. (SEV=429)
CAUSE
ACTION
---------------------------------------------------------------------------------------
430 MESSAGE UNABLE TO LOCK THE NRJE XDS. SHUTDOWN PENDING.
(MAN=430)
CAUSE
ACTION
---------------------------------------------------------------------------------------
542 MESSAGE NRJE (!): CONFIGURATION ERROR JOBLOG FILE BELONGS
TO ANOTHER WORKSTATION. (MON=542)
CAUSE The workstation was configured to use a Joblog file
which was built by another workstation.
ACTION Correct the configuration for the Joblog Data File
and Joblog Key File fields of the NRJE
Configuration: Workstation Data Page 2 screen.
Note that the defaults must be changed if more than
one workstation is configured.
---------------------------------------------------------------------------------------
547 MESSAGE NRJEMON TERMINATING - MUST BE RUN FROM NRJE.SYS.
(MON=547)
CAUSE UserName.AcctName of batch job running NRJEMON must
be NRJE.SYS.
ACTION
---------------------------------------------------------------------------------------
549 MESSAGE NRJE(!): FAILED TO LOCK DUMP'LU LOCAL RIN.
(MON=549)
CAUSE
ACTION
---------------------------------------------------------------------------------------
565 MESSAGE NRJE(!): NRJE JOBLOG RECOVERY SUCCESSFUL.
(MON=565)
CAUSE
ACTION
---------------------------------------------------------------------------------------
566 MESSAGE NRJE(!): NRJE ENCOUNTERED CORRUPTED KEY FILE ON
JOBLOG DUE TO A PREVIOUS SYSTEM FAILURE. REBUILD OF
JOBLOG IN PROGRESS. (MON=566)
CAUSE
ACTION
---------------------------------------------------------------------------------------
567 MESSAGE NRJE(!): FAILED TO OBTAIN JOBLOG AND LOOKUP TABLE
FILE FROM THE CONFIGURATION FILE. (CFG=!)
(MON=567)
CAUSE
ACTION
---------------------------------------------------------------------------------------
568 MESSAGE NRJE(!): NEW JOBLOG FILE BUILT SUCCESSFULLY.
(MON=568)
CAUSE
ACTION
---------------------------------------------------------------------------------------
569 MESSAGE NRJE(!): WARNING: CONFIGURATION ERROR. LOOKUP
TABLE SPECIFIED IN CONFIGURATION FILE COULD NOT BE
FOUND. (MON=569)
CAUSE NRJE was configured to use a Formid Lookup Table,
but the file does not exist.
ACTION If you want to use a Lookup Table, create the table
file, store it in the SYS account, and specify the
file's name in the Formid Lookup Table File field
of the NRJE Configuration: Workstation Data Page 2
screen. If you do not want to use a Lookup Table,
specify all blanks in the Formid Lookup Table File
field of the Workstation Data Page 2 screen.
---------------------------------------------------------------------------------------
570 MESSAGE (!) ! (MON=570).
CAUSE
ACTION
---------------------------------------------------------------------------------------
571 MESSAGE NRJE(!): CREATING NEW JOBLOG FILE. (MON=571)
CAUSE
ACTION
---------------------------------------------------------------------------------------
574 MESSAGE NRJE(!): WARNING: DMOVIN FAILURE. COULD NOT
EXECUTE 'RELOAD' COMMAND. (MON=574)
CAUSE
ACTION
---------------------------------------------------------------------------------------
575 MESSAGE NRJE(!): SUCCESSFULLY RELOADED LOOKUP TABLE
(MON=575)
CAUSE
ACTION
---------------------------------------------------------------------------------------
576 MESSAGE NRJE(!): UNABLE TO RELOAD LOOKUP TABLE (MON=576)
CAUSE
ACTION
---------------------------------------------------------------------------------------
581 MESSAGE NRJE (!): FAILED TO CREATE IOWAIT PORT FOR NRJE
MONITOR STATUS=! (MON=581)
CAUSE NRJE could not obtain a port for interprocess
communication using the CREATIOWAITPORT system
procedure. This is an internal error.
ACTION Contact Hewlett-Packard.
---------------------------------------------------------------------------------------
582 MESSAGE NRJE (!): NRJEMON CANNOT ACCESS READER
CONFIGURATION DATA (CFG=!) (MON=582)
CAUSE NRJE failed to read the contents of the NRJE
Configuration: Reader Data screen in the
configuration file.
ACTION Use NMMGR to verify the contents of the
configuration file. Ensure that the Data flag for
the NRJE Configuration: Reader Data screen is
"Yes". Check the versions of NRJE and NMS, using
NMMAINT.
---------------------------------------------------------------------------------------
583 MESSAGE NRJE (!): NRJEMON CANNOT ACCESS READER LDEV SYSTEM
CONFIGURATION INFORMATION. (STATUS=!) (MON=583)
CAUSE NRJE cannot obtain the device queue for the NRJE
reader.
ACTION Verify that the logical device number on the NRJE
Configuration: Reader Data screen matches a
logical device in the system I/O configuration of
type 22, subtype 2, driver name=IONRDR0. Ensure
that the ldev is accessed by only one workstation.
---------------------------------------------------------------------------------------
584 MESSAGE NRJE (!): NRJE CANNOT OBTAIN OUTFENCE INFORMATION
FOR THE NRJE VIRTUAL READER (SPOOLER=!) (MON=584).
CAUSE NRJEDEVINFO returned non-zero status.
ACTION Verify that the logical device number in the NRJE
Configuration: Reader Data screen matches a
logical device in the system I/O configuration of
type 22, subtype 2, driver name=IONRDRO. Ensure
that the ldev is accessed by only one workstation.
---------------------------------------------------------------------------------------
585 MESSAGE NRJE(!): NRJE CANNOT OBTAIN INFORMATION ABOUT
SPOOLFILES QUEUED TO THE NRJE VIRTUAL READER
(SPOOLER=!) (MON=585).
CAUSE A call to NRJESPOOLINFO returned non- zero status.
ACTION Verify that the logical device number in the NRJE
Configuration: Reader Data screen matches a
logical device in the system I/O configuration of
type 22, subtype 2, driver name=IONRDR0. Ensure
that the ldev is accessed by only one workstation.
---------------------------------------------------------------------------------------
809 MESSAGE INTERNAL TRACING NOT TURNED ON - UNAVAILABLE
FEATURE. (CI=809)
CAUSE
ACTION
---------------------------------------------------------------------------------------
851 MESSAGE ! (CI=851)
CAUSE
ACTION
---------------------------------------------------------------------------------------
853 MESSAGE UNABLE TO SET ABORT TRAP. (SEV=853)
CAUSE
ACTION
---------------------------------------------------------------------------------------
855 MESSAGE UNABLE TO EXTEND WAIT ON THE "FROM HOST" MESSAGE
FILE. (SEV=855)
CAUSE
ACTION
---------------------------------------------------------------------------------------
856 MESSAGE UNABLE TO WRITE A CONSOLE MESSAGE TO STDLIST.
(CI=856)
CAUSE
ACTION
---------------------------------------------------------------------------------------
857 MESSAGE UNABLE TO READ A CONSOLE MESSAGE FROM THE "FROM
HOST" FILE. (SEV=857)
CAUSE
ACTION
---------------------------------------------------------------------------------------
858 MESSAGE HOST CONSOLE IS OPEN. (CI=858)
CAUSE The CI is ready to accept console commands.
ACTION
---------------------------------------------------------------------------------------
859 MESSAGE HOST CONSOLE IS RELEASED. (CI=859)
CAUSE The CI is no longer accepting console commands.
ACTION
---------------------------------------------------------------------------------------
1101 MESSAGE NRJE(!;!) - WS INDEX NOT IN THE RANGE OF 1 TO 8.
(LU=1101)
CAUSE NRJELU is not run as a son of NRJEMON.
ACTION Run NRJEMON which will run NRJELU. If the error
still occurs please report it to Hewlett-Packard.
---------------------------------------------------------------------------------------
1102 MESSAGE NRJE(!;!) - LU INDEX NOT IN THE RANGE OF 0 TO 63.
(LU=1102)
CAUSE NRJELU is not run as a son of NRJEMON.
ACTION Run NRJEMON which will run NRJELU. If the error
still occurs please report it to Hewlett-Packard.
---------------------------------------------------------------------------------------
1103 MESSAGE NRJE(!;!) - LU# ! WS NOT ACTIVE. (LU=1103)
CAUSE NRJELU is not run as a son of NRJEMON.
ACTION Run NRJEMON which will run NRJELU. If the error
still occurs please report it to Hewlett-Packard.
---------------------------------------------------------------------------------------
1104 MESSAGE NRJE(!;!) - LU NOT IN PENDING STATE. (LU=1104)
CAUSE NRJELU is not run as a son of NRJEMON.
ACTION Run NRJEMON which will run NRJELU. If the error
still occurs please report it to Hewlett-Packard.
---------------------------------------------------------------------------------------
1105 MESSAGE NRJE(!;!) - UNABLE TO SET ABORT TRAP. (SEV=1105)
CAUSE
ACTION
---------------------------------------------------------------------------------------
1106 MESSAGE NRJE(!;!) - "TO HOST" CONSOLE FILE OPEN FAILED.
(SEV=1106)
CAUSE
ACTION
---------------------------------------------------------------------------------------
1107 MESSAGE NRJE(!;!) - "FROM HOST" CONSOLE FILE OPEN FAILED.
(SEV=1107)
CAUSE
ACTION
---------------------------------------------------------------------------------------
1109 MESSAGE NRJE(!;!) - RELEASE READER CONTAINED A SEVERE
ERROR. (SEV=1109)
CAUSE
ACTION
---------------------------------------------------------------------------------------
1120 MESSAGE NRJE(!;!) - INITIALIZATION COMPLETED. (LU=1120)
CAUSE LU completes its initialization; communication to
host is established.
ACTION
---------------------------------------------------------------------------------------
1121 MESSAGE NRJE(!;!) - TERMINATED. (LU=1121)
CAUSE First ! contains a workstation name. Second !
contains an LU name.
ACTION
---------------------------------------------------------------------------------------
1151 MESSAGE NRJE(!;!) - ABORT RECEIVE COMPLETION EXPECTED.
(SEV=1151)
CAUSE
ACTION
---------------------------------------------------------------------------------------
1153 MESSAGE NRJE(!;!) - SSCP RECEIVE COMPLETION EXPECTED.
(SEV=1153)
CAUSE
ACTION
---------------------------------------------------------------------------------------
1154 MESSAGE NRJE(!;!) - UNEXPECTED IOWAIT COMPLETION.
(SEV=1154)
CAUSE
ACTION
---------------------------------------------------------------------------------------
1155 MESSAGE NRJE(!;!) - UNEXPECTED IOWAIT COMPLETION FOR A
RECEIVE. (SEV=1155)
CAUSE
ACTION
---------------------------------------------------------------------------------------
1156 MESSAGE NRJE(!;!) - RECEIVE COMPLETED IN A WRONG STATE.
(SEV=1156)
CAUSE
ACTION
---------------------------------------------------------------------------------------
1157 MESSAGE NRJE(!;!) - IOWAIT RETURNS 0 FOR THE FILE NUMBER.
(SEV=1157)
CAUSE
ACTION
---------------------------------------------------------------------------------------
1158 MESSAGE NRJE(!;!) - UNABLE TO READ XPORT MESSAGE #: !.
(SEV=1158)
CAUSE
ACTION
---------------------------------------------------------------------------------------
1159 MESSAGE NRJE(!;!) - !. (COMMXPORT=1159)
CAUSE An XPORT error occurred. The third ! contains the
error message.
ACTION
---------------------------------------------------------------------------------------
1201 MESSAGE NRJE(!;!) - UNEXPECTED SDT. (SEV=1201)
CAUSE
ACTION
---------------------------------------------------------------------------------------
1202 MESSAGE NRJE(!;!) - UNEXPECTED CLEAR. (SEV=1202)
CAUSE
ACTION
---------------------------------------------------------------------------------------
1203 MESSAGE NRJE(!;!) - UNEXPECTED BIND. (SEV=1203)
CAUSE
ACTION
---------------------------------------------------------------------------------------
1204 MESSAGE NRJE(!;!) - UNEXPECTED UNBIND. (SEV=1204)
CAUSE
ACTION
---------------------------------------------------------------------------------------
1207 MESSAGE NRJE(!;!) - ILLEGAL BIND. (SC=1207)
CAUSE Session Control has rejected a BIND received from
the host.
ACTION Refer to configuration section in SNA link manual
and reconfigure the logmode entry on the host
correctly.
---------------------------------------------------------------------------------------
1208 MESSAGE NRJE(!;!) - UNRECOGNIZED SESSION CONTROL COMMAND.
(SEV=1208)
CAUSE
ACTION
---------------------------------------------------------------------------------------
1215 MESSAGE NRJE(!;!) - BRACKET ERROR, LU IS TERMINATING
...(SEV=1215)
CAUSE
ACTION
---------------------------------------------------------------------------------------
1220 MESSAGE NRJE(!;!) - SDT RECEIVED. (SC=1220)
CAUSE
ACTION
---------------------------------------------------------------------------------------
1221 MESSAGE NRJE(!;!) - CLEAR RECEIVED. (SC=1221)
CAUSE
ACTION
---------------------------------------------------------------------------------------
1222 MESSAGE NRJE(!;!) - RECEIVED BIND= ! (SC=1222)
CAUSE
ACTION
---------------------------------------------------------------------------------------
1224 MESSAGE NRJE(!;!) - RECEIVED UNBIND= ! (SC=1224)
CAUSE
ACTION
---------------------------------------------------------------------------------------
1226 MESSAGE NRJE(!;!) - LU ACTIVATION COMPLETED. (SC=1226)
CAUSE An illegal BIND, that is, one that doesn't match
NMCONFIG parameters, or one that doesn't match
hardcoded parameters has been received from the IBM
host. These messages are an expansion of, and
replacement for, error message 1207.
ACTION
---------------------------------------------------------------------------------------
1270 MESSAGE ILLEGAL BIND - host config, format <> 0 (SC=1270)
CAUSE
ACTION
---------------------------------------------------------------------------------------
1271 MESSAGE ILLEGAL BIND - host config, bind is non-negotiable
(SC=1271)
CAUSE
ACTION
---------------------------------------------------------------------------------------
1272 MESSAGE ILLEGAL BIND - host config, use FMPROF = X'03'
(SC=1272)
CAUSE
ACTION
---------------------------------------------------------------------------------------
1273 MESSAGE ILLEGAL BIND - host config, use TSPROF = X'03'
(SC=1273)
CAUSE
ACTION
---------------------------------------------------------------------------------------
1274 MESSAGE ILLEGAL BIND - host config, PRIPROT req mode
(SC=1274)
CAUSE
ACTION
---------------------------------------------------------------------------------------
1275 MESSAGE ILLEGAL BIND - host config, SECPROT chaining
(SC=1275)
CAUSE
ACTION
---------------------------------------------------------------------------------------
1276 MESSAGE ILLEGAL BIND - host config, SECPROT req mode
(SC=1276)
CAUSE
ACTION
---------------------------------------------------------------------------------------
1277 MESSAGE ILLEGAL BIND - host config, SECPROT chain rsp
(SC=1277)
CAUSE
ACTION
---------------------------------------------------------------------------------------
1278 MESSAGE ILLEGAL BIND - host config, SECPROT end bracket
(SC=1278)
CAUSE
ACTION
---------------------------------------------------------------------------------------
1279 MESSAGE ILLEGAL BIND - host config, COMPROT (SC=1279)
CAUSE
ACTION
---------------------------------------------------------------------------------------
1280 MESSAGE ILLEGAL BIND - host config, PSERVIC bits 0-12
(SC=1280)
CAUSE
ACTION
---------------------------------------------------------------------------------------
1281 MESSAGE ILLEGAL BIND - host config, PSERVIC (SC=1281)
CAUSE
ACTION
---------------------------------------------------------------------------------------
1282 MESSAGE ILLEGAL BIND - host config, PSERVIC (SC=1282)
CAUSE
ACTION
---------------------------------------------------------------------------------------
1283 MESSAGE ILLEGAL BIND - secondary RU size (SC=1283)
CAUSE
ACTION
---------------------------------------------------------------------------------------
1284 MESSAGE ILLEGAL BIND - host config, RU infinity bit
(SC=1284)
CAUSE
ACTION
---------------------------------------------------------------------------------------
1285 MESSAGE ILLEGAL BIND - primary RU size too big (SC=1285)
CAUSE
ACTION
---------------------------------------------------------------------------------------
1286 MESSAGE ILLEGAL BIND - compression (SC=1286)
CAUSE
ACTION
---------------------------------------------------------------------------------------
1287 MESSAGE ILLEGAL BIND - translation (SC=1287)
CAUSE
ACTION
---------------------------------------------------------------------------------------
1288 MESSAGE ILLEGAL BIND - transport exception (SC=1288)
CAUSE
ACTION
---------------------------------------------------------------------------------------
3000 MESSAGE NRJE(!;!): QUIESCE SHUTDOWN COMMAND RECEIVED
(LU=3000)
CAUSE
ACTION
---------------------------------------------------------------------------------------
3001 MESSAGE NRJE(!;!): PROTOCOL SHUTDOWN COMMAND RECEIVED
(LU=3001)
CAUSE
ACTION
---------------------------------------------------------------------------------------
3002 MESSAGE NRJE(!;!): LINK SHUTDOWN COMMAND RECEIVED
(LU=3002)
CAUSE
ACTION
---------------------------------------------------------------------------------------
3003 MESSAGE NRJE(!;!): LINK FAILURE INDICATION RECEIVED
(LU=3003)
CAUSE
ACTION
---------------------------------------------------------------------------------------
3004 MESSAGE NRJE(!;!): TRANSPORT INTERNAL ERROR REPORTED
(LU=3004)
CAUSE
ACTION
---------------------------------------------------------------------------------------
3005 MESSAGE NRJE(!;!): HIERARCHICAL SHUTDOWN COMMAND RECEIVED
(LU=3005)
CAUSE
ACTION
---------------------------------------------------------------------------------------
4001 MESSAGE NRJE(!;!): FMD CANNOT DECOMPRESS A CONSOLE MESSAGE
(SENSE=!) (SEV=4001).
CAUSE
ACTION
---------------------------------------------------------------------------------------
4002 MESSAGE NRJE(!;!): FMD ABORTED A BAD CONSOLE MESSAGE AT
THE END OF CHAIN (FMD=4002).
CAUSE
ACTION
---------------------------------------------------------------------------------------
4003 MESSAGE NRJE(!;!): FMD CANNOT UNLOCK THE CONSOLE MESSAGE
PIPE (FS=!) (SEV=4003).
CAUSE
ACTION
---------------------------------------------------------------------------------------
4004 MESSAGE NRJE(!;!): FMD CANNOT LOCK THE CONSOLE COMMAND
PIPE (FS=!) (SEV=4004).
CAUSE
ACTION
---------------------------------------------------------------------------------------
4005 MESSAGE NRJE(!;!): FMD CANNOT TRANSLATE A CONSOLE MESSAGE
(SEV=4005).
CAUSE
ACTION
---------------------------------------------------------------------------------------
4006 MESSAGE NRJE(!;!): FMD CANNOT WRITE TO THE CONSOLE MESSAGE
PIPE (FS=!) (SEV=4006).
CAUSE
ACTION
---------------------------------------------------------------------------------------
4007 MESSAGE NRJE(!;!): FMD RECEIVED A CANCEL REQUEST FOR A
CONSOLE MESSAGE (FMD=4007).
CAUSE
ACTION
---------------------------------------------------------------------------------------
4008 MESSAGE NRJE(!;!): THE PLU ABORTED THE TRANSMISSION OF A
CONSOLE MESSAGE (FMD=4008).
CAUSE
ACTION
---------------------------------------------------------------------------------------