HP 3000 Manuals HP 3000 Manuals
SNA NRJE Error Messages (continued)
---------------------------------------------------------------------------------------
757 MESSAGE WORKSTATION ID DOES NOT EXIST. (CI=757)
CAUSE The workstation identification specified is in
error, or has not been configured.
ACTION Verify the workstation identification desired.
Correct the information and re-enter the data.
---------------------------------------------------------------------------------------
758 MESSAGE WARNING: NO WORKSTATION ID HAS BEEN SPECIFIED.
(CI=758)
CAUSE There is no default workstation.
ACTION Enter an NRJE command with a workstation
identification, or enter subsequent commands and
include the workstation identification.
---------------------------------------------------------------------------------------
759 MESSAGE NO INPUT FILE SPECIFIED FOR THE SUBMIT COMMAND.
(CI=759)
CAUSE An input file name is required. It may be a fully
qualified file name or a file reference.
ACTION Correct the SUBMIT command to include an input file
name, and re-enter it.
---------------------------------------------------------------------------------------
760 MESSAGE TRANSLATION OR COMPRESSION CANNOT BE SPECIFIED WITH
DIRECT. (CI=760)
CAUSE Translation and compression cannot be combined with
the DIRECT option.
ACTION Revise the command to omit this combination and
re-enter it.
---------------------------------------------------------------------------------------
761 MESSAGE COMPRESSED AND UNTRANSLATED INPUT FILE IS NOT
ALLOWED. (CI=761)
CAUSE An input file submitted with compressed and
untranslated options is not allowed. An input file
must have been translated before compression on it
can be performed.
ACTION Resubmit and specify compressed and translated for
the file.
---------------------------------------------------------------------------------------
762 MESSAGE NO NULL KEYWORD IS ALLOWED. (CI=762)
CAUSE Two semicolons without any token between them
detected.
ACTION Re-enter.
---------------------------------------------------------------------------------------
767 MESSAGE CONSOLE ALREADY OPENED. (CI=767)
CAUSE
ACTION
---------------------------------------------------------------------------------------
769 MESSAGE NULL TRACE TYPE IS NOT ALLOWED. (CI=769)
CAUSE No trace type has been specified in the TRACEON
command while other keywords for the command are
specified.
ACTION Re-enter.
---------------------------------------------------------------------------------------
770 MESSAGE ILLEGAL TRACE TYPE IS DETECTED. (CI=770)
CAUSE
ACTION
---------------------------------------------------------------------------------------
771 MESSAGE TRACE TYPE IS ALREADY SPECIFIED. (CI=771)
CAUSE
ACTION
---------------------------------------------------------------------------------------
772 MESSAGE ILLEGAL TRACE MEDIUM: MUST BE DISC OR TAPE.
(CI=772)
CAUSE
ACTION
---------------------------------------------------------------------------------------
773 MESSAGE ILLEGAL NUMBER OF RECORDS (0-32767). (CI=773)
CAUSE
ACTION
---------------------------------------------------------------------------------------
777 MESSAGE PM CAPABILITY REQUIRED TO EXECUTE THE COMMAND.
(CI=777)
CAUSE
ACTION
---------------------------------------------------------------------------------------
778 MESSAGE MISSING FILE NAME. (CI=778)
CAUSE SUBMIT command detects no input file has been
entered.
ACTION Re-enter SUBMIT command with file name.
---------------------------------------------------------------------------------------
780 MESSAGE OPENING CONSOLE IN PROGRESS...(CI=780)
CAUSE
ACTION
---------------------------------------------------------------------------------------
781 MESSAGE JCW TABLE IS FULL. UNABLE TO OBTAIN CONSOLE.
(CI=781)
CAUSE
ACTION
---------------------------------------------------------------------------------------
783 MESSAGE UNABLE TO RUN VERSION PROGRAM. MAKE SURE
NRJEVERS.NRJE.SYS EXISTS. (CI=783)
CAUSE
ACTION
---------------------------------------------------------------------------------------
784 MESSAGE COMMAND NOT VALID WITH NRJECONTROL. (CI=784)
CAUSE
ACTION
---------------------------------------------------------------------------------------
785 MESSAGE KEYWORDS: SYNTAX, PARMS, OPERATION, ALL
CAUSE
ACTION
---------------------------------------------------------------------------------------
786 MESSAGE ATTEMPTING TO REOPEN CONSOLE. (CI=786)
CAUSE
ACTION
---------------------------------------------------------------------------------------
800 MESSAGE GENERAL INFORMATION
CAUSE
ACTION
---------------------------------------------------------------------------------------
801 MESSAGE READER QUEUE
CAUSE
ACTION
---------------------------------------------------------------------------------------
802 MESSAGE LOGICAL WRITER
CAUSE
ACTION
---------------------------------------------------------------------------------------
803 MESSAGE ACTIVE WORKSTATIONS
CAUSE
ACTION
---------------------------------------------------------------------------------------
804 MESSAGE WORKSTATION LU LIST
CAUSE
ACTION
---------------------------------------------------------------------------------------
805 MESSAGE JOB SUCCESSFULLY SUBMITTED. THE SPOOL FILE IS:
CAUSE
ACTION
---------------------------------------------------------------------------------------
806 MESSAGE NO WORKSTATION IS ACTIVE. (CI=806)
CAUSE
ACTION
---------------------------------------------------------------------------------------
807 MESSAGE WORKSTATION IS NOT ACTIVE. DISPLAY IS USED.
(CI=807)
CAUSE
ACTION
---------------------------------------------------------------------------------------
808 MESSAGE WHEN READER FENCE IS 0, MPE SYSTEM OUTFENCE IS
USED. (CI=808)
CAUSE
ACTION
---------------------------------------------------------------------------------------
818 MESSAGE NO USER, @, SPOOLFILE, OR HOST JOB SPECIFIED.
(CI=818)
CAUSE Syntax to CANCEL was invalid.
ACTION Re-enter CANCEL command with the correct
parameters.
---------------------------------------------------------------------------------------
819 MESSAGE NO USER, @, SPOOLFILE, OR HOST JOB SPECIFIED.
(CI=819)
CAUSE Syntax to SHOW was invalid.
ACTION Re-enter SHOW command with the correct parameters.
---------------------------------------------------------------------------------------
820 MESSAGE PR SPECIFICATION MUST BE BETWEEN 1 AND 86
CHARACTERS. (CI=820)
CAUSE An incorrect print destination was entered on a
SUBMIT command.
ACTION A print destination specification must be between 1
and 86 characters. Correct the information and
re-enter the data.
---------------------------------------------------------------------------------------
821 MESSAGE PU SPECIFICATION MUST BE BETWEEN 1 AND 86
CHARACTERS. (CI=821)
CAUSE An incorrect punch destination was entered on a
SUBMIT command.
ACTION A punch destination specification must be between 1
and 86 characters. Correct the information and
re-enter the data.
---------------------------------------------------------------------------------------
822 MESSAGE FO SPECIFICATION MUST BE BETWEEN 1 AND 86
CHARACTERS. (CI=822)
CAUSE An incorrect forms destination was entered on a
SUBMIT command.
ACTION A forms destination specification must be between 1
and 86 characters. Correct the information and
re-enter the data.
---------------------------------------------------------------------------------------
823 MESSAGE KEYWORD HJ= VALID ONLY IN SHOW AND CANCEL COMMANDS.
(CI=823)
CAUSE A keyword was used incorrectly.
ACTION Omit the keyword from the command and re-enter the
data.
---------------------------------------------------------------------------------------
824 MESSAGE HOST JOB NAME MUST BE BETWEEN 1 AND 8 CHARACTERS.
(CI=824)
CAUSE An incorrect host job name or number was entered in
a SHOW or CANCEL command.
ACTION A host job name or number is 1 to 8 characters.
Correct the information and re-enter.
---------------------------------------------------------------------------------------
825 MESSAGE ERROR IN CONFIGURATION FILE ACCESS. (CI=825)
CAUSE The NRJE command interpreter received an error when
trying to access workstation information from the
configuration file. Another, more specific message
will appear after this message.
ACTION Determine the cause by inspecting the second error
message and correct the problem.
---------------------------------------------------------------------------------------
826 MESSAGE ERROR IN CONFIGURATION FILE ACCESS. (CI=826)
CAUSE The NRJE command interpreter received an error when
trying to access workstation information from the
configuration file. Another more specific message
will appear from this message.
ACTION Determine the cause by inspecting the second error
message and correct the problem. A severe error
has occurred.
---------------------------------------------------------------------------------------
827 MESSAGE HOST JOB NAME MUST BE BETWEEN 1 AND 8 CHARACTERS.
(CI=827)
CAUSE An incorrect host job name or number was entered in
a SHOW or CANCEL command.
ACTION A host job name or number is 1 to 8 characters.
Correct the information and re-enter.
---------------------------------------------------------------------------------------
830 MESSAGE 'ALL' OR 'OLD' EXPECTED. (CI=830)
CAUSE
ACTION
---------------------------------------------------------------------------------------
831 MESSAGE INVALID KEYWORD LENGTH. 'ALL' OR 'OLD' EXPECTED.
(CI=831)
CAUSE
ACTION
---------------------------------------------------------------------------------------
832 MESSAGE DATE KEYWORD IS NOT VALID WITH THIS COMMAND.
(CI=832)
CAUSE
ACTION
---------------------------------------------------------------------------------------
833 MESSAGE TIME KEYWORD IS NOT VALID WITH THIS COMMAND.
(CI=833)
CAUSE
ACTION
---------------------------------------------------------------------------------------
834 MESSAGE TIME PARAMETER LENGTH IS INVALID. (CI=834)
CAUSE
ACTION
---------------------------------------------------------------------------------------
835 MESSAGE DATE PARAMETER LENGTH IS INVALID. (CI=835)
CAUSE
ACTION
---------------------------------------------------------------------------------------
836 MESSAGE INVALID DATE FORMAT. (NLERR=!). (CI=836)
CAUSE
ACTION
---------------------------------------------------------------------------------------
837 MESSAGE INVALID KEYWORD. 'ALL' OR 'OLD' EXPECTED. (CI=837)
CAUSE
ACTION
---------------------------------------------------------------------------------------
838 MESSAGE INVALID DATE AND TIME FORMAT. (NLERR=!). (CI=838)
CAUSE
ACTION
---------------------------------------------------------------------------------------
839 MESSAGE INVALID TIME FORMAT. (NLERR=!). (CI=839)
CAUSE
ACTION
---------------------------------------------------------------------------------------
840 MESSAGE WARNING: FUTURE DATE AND TIME SPECIFIED. ENTIRE
JOBLOG WILL BE PURGED. (CI=840)
CAUSE
ACTION
---------------------------------------------------------------------------------------
841 MESSAGE INVALID MAXREC VALUE SPECIFIED. (CI=841)
CAUSE
ACTION
---------------------------------------------------------------------------------------
842 MESSAGE WARNING: 'TRANSLATED' KEYWORD USED. 'NOTRANSLATE'
WILL BE ASSUMED. (CI=842)
CAUSE
ACTION
---------------------------------------------------------------------------------------
850 MESSAGE ENTIRE JOBLOG PURGED. DISC SPACE RECOVERED.
(CI=850)
CAUSE
ACTION
---------------------------------------------------------------------------------------
851 MESSAGE JOBLOG PURGED OF ! ENTRIES. DISC SPACE WAS NOT
RECOVERED. (CI=851)
CAUSE
ACTION
---------------------------------------------------------------------------------------
852 MESSAGE JOBLOG PURGED OF ! ENTIRES. DISC SPACE RECOVERED.
(CI=852)
CAUSE
ACTION
---------------------------------------------------------------------------------------
853 MESSAGE JOBLOG PURGED OF ! ENTRIES. DISC SPACE WAS NOT
RECOVERED. (CI=853)
CAUSE
ACTION
---------------------------------------------------------------------------------------
854 MESSAGE INVALID TIME FORMAT. FOR NATIVE-3000, "AM" OR "PM"
MUST BE INDICATED. (EX: 10:42 AM). (NLERR=!).
(CI=854)
CAUSE
ACTION
---------------------------------------------------------------------------------------
855 MESSAGE YOU MUST LOG ON TO THE SYS ACCOUNT TO PURGE THE
JOBLOG. (CI=855)
CAUSE
ACTION
---------------------------------------------------------------------------------------
856 MESSAGE ENVID length is not between 1 and 50 characters.
(CI=856)
CAUSE
ACTION
---------------------------------------------------------------------------------------
857 MESSAGE Info string length is not between 1 and 65
characters. (CI=857)
CAUSE
ACTION
---------------------------------------------------------------------------------------
858 MESSAGE Unauthorized SNA Server user. (CI=858)
CAUSE
ACTION
---------------------------------------------------------------------------------------
1010 MESSAGE WORKSTATION ID NOT FOUND IN CONFIGURATION FILE.
(CFG=1010)
CAUSE
ACTION
---------------------------------------------------------------------------------------
1020 MESSAGE ARRAYS TOO SMALL TO RETURN LU CONFIGURATION.
(CFG=1020)
CAUSE
ACTION
---------------------------------------------------------------------------------------
1030 MESSAGE ARRAYS TOO SMALL TO RETURN WRITER CONFIGURATION.
(CFG=1030)
CAUSE
ACTION
---------------------------------------------------------------------------------------