|
|
MESSAGE: None |
Level: 7 CLAS0001
CAUSE: Bad or unexpected message received by PROBE
Port (PARM = Message Function Code).
ACTION: See Appendix A "Submitting a CR"
of this manual. |
MESSAGE: None |
Level: 14 CLAS0003
CAUSE: Retransmission timeout is faster than packet can
be sent out to the node. This can happen if the node is congested.
PARM indicates probe (%1) or proxy (%2) timer.
ACTION: Increase the retransmission time in the configuration file
(@NETXPORT.NI.lanNI.protocol.PROBE). See
Appendix A "Submitting a CR"
of this manual. |
MESSAGE: None |
Level: 15 CLAS0003
CAUSE: Reply received after request has timed out (PARM
= Sequence number from PROBE Address Reply Packet).
ACTION: Can happen from time to time. If excessive, then increase
retransmission timeout or retry count in Probe Protocol Configuration
screen in NMMGR and see Appendix A "Submitting a CR"
of this manual. |
MESSAGE: None |
Level: 16 CLAS0003
CAUSE: Reply received after request has timed out (PARM
= Sequence number from PROBE Name Reply Packet).
ACTION: Can happen from time to time. If excessive, then increase
retransmission timeout or retry count in the Probe Protocol Configuration
screen and see Appendix A "Submitting a CR"
of this manual. |
MESSAGE: None |
Level: 17 CLAS0002
CAUSE: DictSend to name server port failed on Proxy Name
Request (PARM = DictSend result code).
ACTION: See Appendix A "Submitting a CR"
of this manual. |
MESSAGE: None |
Level: 20 CLAS0002
CAUSE: Reply received after request has timed out (PARM
= Request ID).
ACTION: Can happen from time to time. If excessive, then increase
retransmission timeout or retry count in the Probe Protocol Configuration
screen and see Appendix A "Submitting a CR"
of this manual. |
MESSAGE: None |
Level: 21 CLAS0002
CAUSE: Room allocated for node name and path report is
too small (PARM = number of bytes short).
ACTION: See Appendix A "Submitting a CR"
of this manual. |
MESSAGE: None |
Level: 22 CLAS0002
CAUSE: Timer popped which has no request outstanding (PARM
= Time request ID).
ACTION: See Appendix A "Submitting a CR"
of this manual. |
MESSAGE: None |
Level: 23 CLAS0002
CAUSE: Received Gateway Reply message, which is not supported
(PARM = Probe message type).
ACTION: See Appendix A "Submitting a CR"
of this manual. |
MESSAGE: None |
Level: 24 CLAS0003
CAUSE: Late reply came in when cleaning up Proxy
(PARM = request ID).
ACTION: See Appendix A "Submitting a CR"
of this manual. |
MESSAGE: None |
Level: 27 CLAS0002
CAUSE: Message type in incoming packet is invalid.
ACTION: See Appendix A "Submitting a CR"
of this manual. |
MESSAGE: None |
Level: 28 CLAS0005
CAUSE: Retransmission has occurred (PARM = Retries until
exhausted).
ACTION: Informative message. |
MESSAGE: None |
Level: 29 CLAS0002
CAUSE: Attempt to cache node name failed (PARM = Length of Name).
ACTION: See Appendix A "Submitting a CR"
of this manual. |
MESSAGE: None |
Level: 30 CLAS0002
CAUSE: Attempt to cache node name failed (PARM = Length of Name).
ACTION: See Appendix A "Submitting a CR"
of this manual. |
MESSAGE: None |
Level: 32 CLAS0002
CAUSE: Attempt to map addresses failed (PARM = Path resolve
error code).
ACTION: Increase the Maximum Number of Nodes in the LAN 802.3
Network Interface screen in NMMGR. If error recurs then see
Appendix A "Submitting a CR"
of this manual. |
MESSAGE: None |
Level: 33 CLAS0002
CAUSE: Attempt to map addresses failed (PARM = Path resolve
error code).
ACTION: See Appendix A "Submitting a CR"
of this manual. |
MESSAGE: None |
Level: 35 CLAS0004
CAUSE: PROBE Protocol Started.
ACTION: Informative message. |
MESSAGE: None |
Level: 36 CLAS0004
CAUSE: PROBE Protocol Stopped.
ACTION: Informative message. |
MESSAGE: None |
Level: 37 CLAS0004
CAUSE: PROBE Protocol Stopped (Delayed with Proxy).
ACTION: None. |
MESSAGE: None |
Level: 38 CLAS0005
CAUSE: Probe Unsolicited Request made (PARM = Sequence
number allocated for request).
ACTION: Informative message. |
MESSAGE: None |
Level: 39 CLAS0005
CAUSE: Probe Name Request made (PARM = Sequence number allocated
for request).
ACTION: Informative message. |
MESSAGE: None |
Level: 40 CLAS0005
CAUSE: Probe Address Request made (PARM = Sequence number
allocated for request).
ACTION: Informative message. |
MESSAGE: None |
Level: 46 CLAS0005
CAUSE: Probe Node Down Request made (PARM = Sequence number
allocated from request).
ACTION: None. |
MESSAGE: None |
Level: 47 CLAS0002
CAUSE: Error in trying to delete node name from path cache
after receiving a Probe Node Down message.
ACTION: See Appendix A "Submitting a CR"
of this manual. |
MESSAGE: None |
Level: 48 CLAS0002
CAUSE: Attempt to add PROBE to the mapping table during
INIT message failed (PARM = mapping error code).
ACTION: See Appendix A "Submitting a CR"
of this manual. |
MESSAGE: None |
Level: 49 CLAS0002
CAUSE: Could not delete the PROBE entity from the mapping
table in a terminate sequence (PARM = mapping error code).
ACTION: See Appendix A "Submitting a CR"
of this manual. |
MESSAGE: None |
Level: 52 CLAS0002
CAUSE: Invalid device information in Probe's data area.
ACTION: See Appendix A "Submitting a CR"
of this manual. |
MESSAGE: None |
Level: 53 CLAS0002
CAUSE: Invalid device information in Probe's data area.
ACTION: See Appendix A "Submitting a CR"
of this manual. |
MESSAGE: None |
Level: 55 CLAS0002
CAUSE: Attempt to add MAP address failed.
ACTION: Increase the maximum number of nodes in the LAN 802.3 NI
screen in NMMGR. If error recurs, then see Appendix A
"Submitting a CR" of this manual. |
|