VOLUTIL and DISCUTIL
MPE documents | |
 Complete PDF | |
| Table of Contents | |
| E0701 Volume II ♥ | |
| E0300 Volume I | |
| E0300 Volume II | |
| E0300 Volume III | |
| E0394 Volume I | |
| E0796 Volume II | |
| E0494 Volume III |
VOLUTIL Messages
dialog
- 1
- MESSAGE
*Error: Unexpected error returned from execution of FFILEINFO intrinsic. (dialog 1)
- 2
- MESSAGE
*Error: Unable to close INPUT file. (dialog 2)
- 3
- MESSAGE
*Error: Unable to close OUTPUT file. (dialog 3)
- 4
- MESSAGE
*Error: Unexpected error occurred during INPUT file input/output. (dialog 4)
- 5
- MESSAGE
*Error: Unexpected error occurred during OUTPUT file input/output. (dialog 5)
- 6
- MESSAGE
*Error: Unexpected error occurred during $STDIN input operation. (dialog 6)
- 7
- MESSAGE
*Error: Unexpected error occurred during $STDLIST output operation. (dialog 7)
- 8
- MESSAGE
*Error: Unexpected error from FCONTROL intrinsic with INPUT file. (dialog 8)
- 9
- MESSAGE
*Error: Unexpected error from execution of FGETINFO intrinsic. (dialog 9)
- 10
- MESSAGE
*Error: File type not ASCII. (dialog 10)
- 11
- MESSAGE
*Error: Invalid file record size. (dialog 11)
- 12
- MESSAGE
*Error: Unexpected error from execution of PRINTOPREPLY intrinsic. (dialog 12)
- 13
- MESSAGE
*Error: End-of-file encountered on OUTPUT file. (dialog 13)
- 14
- MESSAGE
*Error: End-of-file encountered on INPUT file. (dialog 14)
- 15
- MESSAGE
*Error: End-of-file encountered on $STDLIST. (dialog 15)
- 16
- MESSAGE
*Error: Unexpected error from FPOINT intrinsic. (dialog 16)
parserr
- 15
- MESSAGE
*Error: The VNAME parameter is required. (parserr 15)
- CAUSE
When you entered the NEWVOL command, you forgot to specify a name for the volume.
- ACTION
Reenter the NEWVOL command and remember to specify a volume name.
shell
- 1
- MESSAGE
*Error: Incomplete command pending on end-of-file. (shell 1)
- 2
- MESSAGE
*Error: Unable to process command. (shell 2)
- 3
- MESSAGE
*Error: Invalid parameter length. (shell 3)
- 4
- MESSAGE
*Error: Command history stack is empty. (shell 4)
- 5
- MESSAGE
*Error: Command not found in command history stack. (shell 5)
- 6
- MESSAGE
*Error: Invalid parameter length or composition. (shell 6)
- 7
- MESSAGE
*Error: Unrecognized command. (shell 7)
- 8
- MESSAGE
*Error: GET_NAME error. (shell 8)
- 9
- MESSAGE
*Error: This command has no associated functionality. (shell 9)
- 10
- MESSAGE
*Error: Error in accessing message catalog. (shell 10)
- 11
- MESSAGE
*Error: Invalid numeric index into command history stack. (shell 11)
- 12
- MESSAGE
*Error: Command name length exceeds 16 characters. (shell 12)
- 13
- MESSAGE
*Error: Insufficient capabilities to execute this command. (shell 13)
- 14
- MESSAGE
*Error: MiUssing required parameter not specified in command. (shell 14)
- 15
- MESSAGE
*Error: Parameter can consist of numeric characters only. (shell 15)
- 16
- MESSAGE
*Error: Depth of command stack can only be in the range 1 to 100. (shell 16)
- 17
- MESSAGE
*Error: Invalid key option specified for set command. (shell 17)
- 18
- MESSAGE
*Error: Command only valid in interactive mode. (shell 18)
- 19
- MESSAGE
*Error: Subsys !, Info: !. (shell 19)
- 20
- MESSAGE
*Error: Invalid command edit operation. (shell 20)
volutil
- 53
- MESSAGE
*Error: Volume already exists. (volutil 53)
- CAUSE
When you entered the NEWVOL command, you specified a volume name that already exists.
- ACTION
Use the DSET command to examine the names and characteristics of all the volumes currently on the system. Then reenter the NEWVOL command and specify a volume name that does not exist for the current volume set.
- 54
- MESSAGE
*Error: Volume does not exist. (volutil 54)
- CAUSE
When you entered the INITVOL command, you specified a volume name associated with a particular volume set, but a volume of that name does not exist.
- ACTION
Use the SHOWSET command to examine the names of all volumes in the current volume set. Then reenter the INITVOL command and specify a volume name that does exist in the current volume set.
- 70
- MESSAGE
*Error: Ldev is not a valid disk type for mirroring (volutil 70)
- CAUSE
Mirrored disks are not the correct type (HP7937FL) for volume initialization.
- ACTION
Use correct disk type.
- 71
- MESSAGE
*Error: Mirrored volumes must be specified as a pair. (volutil 71)
- CAUSE
Only one volume was specified in NEWMIRRSET or NEWMIRRVOL.
- ACTION
Specify correct number of disks.
- 72
- MESSAGE
*Error: Mirrored volumes must be unique. (volutil 72)
- CAUSE
LDEV's specified a duplicate number.
- ACTION
Specify a unique LDEV.
- 73
- MESSAGE
*Error: Cannot add mirrored volumes to non-mirrored volume set. (volutil 73)
- CAUSE
Mirrored volumes cannot be added to a non-mirrored volume set.
- ACTION
Specify a mirrored volume set.
- 74
- MESSAGE
*Error: Cannot add non-mirrored volumes to a mirrored volume set. (volutil 74)
- CAUSE
Non-mirrored volumes cannot be added to a mirrored volume set.
- ACTION
Specify a mirrored volume.
- 75
- MESSAGE
*Error: Specified volume set is not mirrored. (volutil 75)
- CAUSE
An attempt was made to perform a mirrored operation on a non-mirrored volume set.
- ACTION
Cause indicates appropriate action.
- 76
- MESSAGE
*Error: Specified volume does not exist on specified ldev. (volutil 76)
- CAUSE
Either the wrong volume name or the wrong LDEV was specified.
- ACTION
Cause indicates appropriate action.
- 77
- MESSAGE
*Error: Command only valid for disabled mirrored volumes. (volutil 77)
- CAUSE
REPLALCEMIRRVOL was issued for a non-disabled volume.
- ACTION
Cause indicates appropriate action.
- 78
- MESSAGE
*Error: Illegal replace. Mirrored partner is not available. (volutil 78)
- CAUSE
REPLALCEMIRRVOL was issued but good volume was not mounted as MEMBER or MASTER.
- ACTION
Verify that volume used is good.
- 79
- MESSAGE
*Error: Mirrored volume must be in pending state. (volutil 79)
- CAUSE
The volume specified in the SUSPENDMIRROR command was not in a pending state.
- ACTION
Be sure specified volume is pending before issuing command.
- 80
- MESSAGE
*Error: Command not supported for mirrored volume sets. (volutil 80)
- CAUSE
The COPYSET command is not supported for mirrored volume sets.
- ACTION
Use a different command.
- 83
- MESSAGE
*Error: Illegal replace. MIrrored pair is already in operation. (volutil 83)
- CAUSE
REPLACEMIRRORVOL was issued on an already functioning mirrored pair.
- ACTION
CAUSE indicates appropriate action.
- 85
- MESSAGE
*Error: User volumes incomplete, cannot use as repair source. (volutil 85)
- CAUSE
The JOINMIRRSET command with SOURCE=USER was specified, and one or more user volumes are missing.
- ACTION
CAUSE indicates appropriate action.
- 86
- MESSAGE
*Error: Backup volumes incomplete, cannot use as repair source. (volutil 86)
- CAUSE
The JOINMIRRSET command with SOURCE=BACKUP was specified, and one or more backup volumes are missing.
- ACTION
CAUSE indicates appropriate action.
- 87
- MESSAGE
*Error: Volume set close failed during join. (volutil 87)
- CAUSE
SOURCE=BACKUP was specified for the join and it failed. One of the reasons could be that users are still logged onto the destination volume set. The JOINMIRRSET command with SOURCE=BACKUP was specified, and one or more backup volumes are missing.
- ACTION
Log off all users from the volume set and retry the JOINMIRRSET. If SOURCE=USER was specified and this message is seen, a split-volume backup is taking place on the backup volumes.
- 88
- MESSAGE
*Error: New volumes cannot be added to a split volume set. (volutil 88)
- CAUSE
The NEWVOL command was used to attempt to add volumes to a split-volume set.
- ACTION
CAUSE indicates appropriate action.
- 89
- MESSAGE
*Error: Mirrored partner is already in suspend mirror state. (volutil 89)
- CAUSE
A SUSPENDMIRRVOL command was issued against a volume whose partner is in the SUSPENDMIRR state.
- ACTION
CAUSE indicates appropriate action.
- 122
- MESSAGE
*Error: Volume mounted in invalid state for desiredoperation. (volutil 122)
- CAUSE
When you entered the INITVOL command, you specified a value for the state parameter which is not valid.
- ACTION
CAUSE indicates appropriate action.
- 130
- MESSAGE
*Error: Error encountered while reading first file label. (volutil 130)
- 131
- MESSAGE
*Error: No tape label on the beginning of tape. Cannot recover. (volutil 131)
- 132
- MESSAGE
*Error: Recover aborted because of tape label error. (volutil 132)
- 133
- MESSAGE
*Error: Recover aborted because of tape error. (volutil 133)
- 134
- MESSAGE
*Error: Recover aborted because of tape positioning error. (volutil 134)
- 135
- MESSAGE
*Error: Recover aborted because of file closing error. (volutil 135)
- 136
- MESSAGE
*Error: Recover aborted by user. (volutil 136)
- 137
- MESSAGE
*Error: Recover aborted because of incorrect capability. (volutil 137)
- MESSAGE
*Error: Destination volume on ldev ! not mounted in valid state.
- MESSAGE
*Error: Invalid response. Please answer with a `Y', `YES', `N', or `NO'.
- MESSAGE
*Error: Source volume on ldev ! not a member of set being copied.
- MESSAGE
*FATAL ERROR: OUTER-MOST RECOVER BLOCK INVOKED. PROGRAM WILL TERMINATE.
- MESSAGE
Subsys !, Info: !.
DISCUTIL Messages
- MESSAGE
CONFIGURATION INFO FOR LDEV NN CORRECTED
- MESSAGE
CONFIGURATION INFO FOR LDEV NN NOT CORRECTED
- MESSAGE
DISCUTIL HAS ENCOUNTERED A TAPE ERROR: REWINDING TAPE
- MESSAGE
END OF TAPE #NN; PLEASE WAIT
- MESSAGE
ENTER "HELP" FOR A LIST OF VALID COMMANDS
- MESSAGE
ERROR - CONFIGURATION INFO FOR LDEV NN IS NOT VALID
- MESSAGE
ERROR - ENCOUNTERED A MISSING VOLUME; UNABLE TO CONTINUE SAVING FILE
- MESSAGE
ERROR - FOUND UNEXPECTED VOLUME ON LDEV NN; UNABLE TO CONTINUE SAVING FILE
- MESSAGE
ERROR - LABEL TABLE CORRUPTED ON LDEV NN; UNABLE TO CONTINUE ON THIS LDEV
- MESSAGE
ERROR - LABEL TABLE OFFSET MISMATCH IN EXTENT BLOCK ENTRY
- MESSAGE
ERROR - OFFSET MISMATCH IN FILE LABEL; SKIPPING TO NEXT LABEL
- MESSAGE
ERROR - UNABLE TO COMPLETE DISK READ ON LDEV NN
- MESSAGE
ERROR - UNABLE TO COMPLETE TAPE EOF WRITE ON LDEV NN
- MESSAGE
ERROR - UNABLE TO COMPLETE TAPE WRITE ON LDEV NN
- MESSAGE
ERROR - UNABLE TO CONVERT LDEV TO PHYSICAL PATH
- MESSAGE
ERROR - UNABLE TO OBTAIN DEVICE STATUS FROM LDEV NN
- MESSAGE
ERROR - UNABLE TO READ THE HPE VOLUME LABEL ON LDEV NN
- MESSAGE
ERROR - UNABLE TO READ THE LABEL TABLE ON LDEV NN; UNABLE TO SAVE FILE
- MESSAGE
ERROR - UNABLE TO READ THE LABEL TABLE ON LDEV NN
- MESSAGE
ERROR - UNABLE TO READ THE LABEL TABLE; SKIPPING TO NEXT LABEL
- MESSAGE
ERROR - UNABLE TO REWIND TAPE ON LDEV NN
- MESSAGE
ERROR - UNABLE TO SET TAPE DENSITY ON LDEV NN
- MESSAGE
LAST FILE ON PREVIOUS TAPE WILL BE RESAVED
- MESSAGE
MOUNT TAPE #NN
- MESSAGE
PRESS RETURN WHEN THE TAPE IS READY
- MESSAGE
SAVE FOR LDEV NN HAS BEEN ABORTED
- MESSAGE
SAVE WILL RESTART WITH TAPE NN; MOUNT A TAPE
- MESSAGE
TAPE DENSITY SET TO DDDD ON LDEV NN
- MESSAGE
THE TAPE ON LDEV NN IS READY
- MESSAGE
WARNING - LDEV NN IS A TAPE DRIVE
- MESSAGE
WARNING - LDEV NN IS A TERMINAL
- MESSAGE
WARNING - LDEV NN IS NOT A VALID DISK LDEV
- MESSAGE
WARNING - LDEV NN IS NOT CONFIGURED
- MESSAGE
WARNING - "XXXX" IS NOT A VALID DISCUTIL COMMAND
- MESSAGE
WARNING - "XXXX" IS NOT A VALID DISCUTIL COMMAND; LDEV NN IS A PRINTER
- MESSAGE
WARNING - LDEV NN IS NOT VALID
- MESSAGE
WARNING - NO LDEVS HAVE BEEN SELECTED FOR SAVING
- MESSAGE
WARNING - THE FILE SET ENTERED IS NOT VALID
- MESSAGE
WARNING - THE MODIFICATION DATE ENTERED IS NOT VALID
- MESSAGE
WARNING - THE TAPE DRIVE DOOR ON LDEV NN IS OPEN
- MESSAGE
WARNING - THE TAPE DRIVE ON LDEV NN IS OFFLINE
- MESSAGE
WARNING - THE TAPE ON LDEV NN DOES NOT HAVE A WRITE ENABLE RING
- MESSAGE
WARNING - THE TAPE ON LDEV NN IS NOT AT BOT
- MESSAGE
WARNING - THE VOLUME SET NAME ENTERED IS NOT VALID
|
Volume Management |
Chapter 8 System Startup, Shutdown, and Configuration |