Terminal I/O Manager for Logging (Subsystem 128)
MPE documents | |
 Complete PDF | |
| Table of Contents | |
| E0701 Volume II | |
| E0300 Volume I | |
| E0300 Volume II | |
| E0300 Volume III ♥ | |
| E0394 Volume I | |
| E0796 Volume II | |
| E0494 Volume III |
- 1
- MESSAGE
An interface warning occurred.
- 2
- MESSAGE
An interface nonfatal error occurred.
- 3
- MESSAGE
An interface fatal error occurred.
- 4
- MESSAGE
A system call warning occurred.
- 5
- MESSAGE
A system call nonfatal error occurred.
- 6
- MESSAGE
A system call fatal error occurred.
- 7
- MESSAGE
An internal warning occurred.
- 8
- MESSAGE
An internal nonfatal error occurred.
- 9
- MESSAGE
An internal fatal error occurred.
- 10
- MESSAGE
An internal event occurred.
- 11
- MESSAGE
A protocol error occurred.
- 12
- MESSAGE
A hardware warning occurred.
- 13
- MESSAGE
A hardware nonfatal error occurred.
- 14
- MESSAGE
A hardware fatal error occurred.
- 15
- MESSAGE
A backplane fatal error occurred.
- 16
- MESSAGE
A reset message was received.
- 17
- MESSAGE
A DTC log warning occurred.
- 18
- MESSAGE
A DTC log nonfatal error occurred.
- 19
- MESSAGE
A DTC log fatal error occurred.
- 101
- MESSAGE
! code download started for DTC address !
- 102
- MESSAGE
! code download completed for DTC address !
- 103
- MESSAGE
! code download aborted for DTC address !
- 107
- MESSAGE
! upload started for DTC address !
- 108
- MESSAGE
! upload completed for DTC address !
- 109
- MESSAGE
! upload aborted for DTC address !
- 111
- MESSAGE
DTCMxxxxxxxx SNP card upload started for DTC address yyyyyyyyyyyy card z. (DTCMINFO111)
- CAUSE
This informational message indicates that an operation of the SNP card upload starts. For example : The card upload starts on an SNP card in slot 3 of DTC IEEE802.3 address at 0800090035A4, the console message will be : DTCMxxxxxxxx SNP card upload started for DTC address 0800090035A4 card 3.
- ACTION
Wait for the SNP card upload to complete. The SNP card upload completion message will be shown on the console.
- 112
- MESSAGE
DTCMxxxxxxxx SNP card upload completed for DTC address yyyyyyyyyyyy card z. (DTCMINFO112)
- CAUSE
This informational message indicates that an operation of the SNP card upload completes. For example : The card upload completes on an SNP card in slot 3 of DTC IEEE802.3 address at 0800090035A4, the console message will be : DTCMxxxxxxxx SNP card upload completed for DTC address 0800090035A4 card 3.
- ACTION
Deliver the SNP dump file to your HP support representative. The SNP dump file name is Sbxxxxxa.PUB.SYS. Where b is the card number in that DTC, xxxxx is the last 5 characters of the IEEE802.3 address of that DTC and a is a charater in the sequense a,b,..z to allow multiple dumps.
- 113
- MESSAGE
DTCMxxxxxxxx SNP card upload aborted for DTC address yyyyyyyyyyyy card z (DTCMERR113)
- CAUSE
This error message indicates that an operation of the SNP card upload was aborted by the DTC. A problem occured with the DTC while the SNP card upload were being performed. For example : The card upload was aborted on an SNP card in slot 3 of DTC IEEE802.3 address at 0800090035A4, the console message will be : DTCMxxxxxxxx SNP card upload aborted for DTC address 0800090035A4 card 3.
- ACTION
Contact your HP support representative. You can obtain the additional information by running the card selftest through the Termdsm.
- 114
- MESSAGE
DTCMxxxxxxxx SNP card tracing aborted for DTC address yyyyyyyyyyyy card z (DTCMERR114)
- CAUSE
This error message indicates that an operation of the SNP card tracing was aborted. This may be caused by a DTC reset/upload or SNP card reset/upload. For example : The card tracing was aborted on an SNP card in slot 1 of DTC IEEE802.3 address at 080009003544, the console message will be : DTCMxxxxxxxx SNP card tracing aborted for DTC address 080009003544 card 1
- ACTION
Contact with the HP support representative.
- 115
- MESSAGE
DTCMxxxxxxxx MUX card upload started for DTC address yyyyyyyyyyyy card z (DTCMINFO115)
- CAUSE
This informational message indicates that an operation of the MUX 68k card upload starts. For example : The card upload starts on a MUX 68k card in slot 2 of DTC IEEE802.3 address at 08000900357D, the console message will be : DTCMxxxxxxxx MUX card upload started for DTC address 08000900357D card 2.
- ACTION
Wait for the MUX 68k card upload to complete. The MUX card upload completion message will be shown on the console.
- 116
- MESSAGE
DTCMxxxxxxxx MUX card upload completed for DTC address yyyyyyyyyyyy card z (DTCMINFO116)
- CAUSE
This informational message indicates that an operation of the MUX 68k card upload completes. For example : The card upload completes on a MUX 68k card in slot 2 of DTC IEEE802.3 address at 08000900357D, the console message will be : DTCMxxxxxxxx MUX card upload completed for DTC address 08000900357D card 2
- ACTION
Deliver the MUX 68k dump file to your HP support representative. The dump file name is Mbxxxxxa.PUB.SYS. Where b is the card number in that DTC, xxxxx is the last 5 characters of the IEEE802.3 address of that DTC and a is a charater in the sequense a,b,..z to allow multiple dumps.
- 117
- MESSAGE
DTCMxxxxxxxx MUX card upload aborted for DTC address yyyyyyyyyyyy card z (DTCMERR117)
- CAUSE
This error message indicates that an operation of the MUX 68k card upload is aborted by the DTC. A problem occurred with DTC while the MUX card upload were being performed. For example : The card upload is aborted on a MUX 68k card in slot 2 of DTC IEEE802.3 address at 08000900357D, the console message will be : DTCMxxxxxxxx MUX card upload aborted for DTC address 08000900357D card 2
- ACTION
Contact your HP support representative. You can obtain the additional information by running the card selftest through the Termdsm.
- 118
- MESSAGE
Now you must restart the MUX Card by resetting DTC address yyyyyyyyyyyy card z (DTCMWARN118)
- CAUSE
This message indicates that the MUX card is not working any more after the MUX 68k upload is completed. Consequently, the user must initiate a MUX reset to reactivate the MUX card.
- ACTION
After the MUX card upload is completed, the user must initiate a MUX card reset by running the host Termdsm to restart the MUX card.
- 123
- MESSAGE
DTCMxxxxxxxx rom code download started for DTC address yyyyyyyyyyyy (DTCMINFO123)
- CAUSE
This informational message indicates that a download operation of the rom code for a DTC starts. For example : The rom code download starts on a DTC IEEE802.3 address at 080009280E1C, the console message will be : DTCMxxxxxxxx rom code download started for DTC address 080009280E1C
- ACTION
Wait for the rom code download to complete. The rom code download completion message will be shown on the console.
- 125
- MESSAGE
DTCMxxxxxxxx rom code download aborted for DTC address yyyyyyyyyyyy (DTCMERR125)
- CAUSE
This error message indicates that a download operation of the rom code was aborted by the DTC. A problem occured with the DTC while the download of the rom code was being performed. For example : The download of the rom code was aborted on the DTC IEEE802.3 address at 080009280E1C, the console message will be : DTCMxxxxxxxx rom code download aborted for DTC address 080009280E1C
- ACTION
The appropriate message with the corrective action will be displayed for the error conditions.
- 126
- MESSAGE
DTCMxxxxxxxx rom code download completed for DTC address yyyyyyyyyyyy (DTCMERR126)
- CAUSE
This informational message indicates that a download operation of the rom code completes. For example : The download of the rom code completed on a DTC IEEE802.3 address at 080009280E1C, the console message will be : DTCMxxxxxxxx rom code download completed for DTC address 080009280E1C
- ACTION
The rom code is downloaded to the DTC without any problems, no actions need to be taken.
|
TermDSM |
Transaction Management (Subsystem 151) |