|
|
To perform your task correctly, you must do the following:
Select your task checklist(s).
Use Table 2-1 to identify which checklist(s) you need. If you see two
or three checklist titles at the end of the row for your task, media,
and patching situation in Table 2-1 with "and" separating them,
perform the activities on the checklists in the order listed.
For example, if you are applying only a
patch on a
remote system, and you are
using a tape as the source,
but the modifying media is disk, first complete the tasks on
Checklist B, "Manage Patches by Staging Areas," then complete tasks
on Checklist C, "Distributing Staging Areas to Remote Systems."
Applicable only to Reactive NOT for Powerpatch.
Find your checklist(s) and print a copy for each system that you
are updating.
Read and perform the steps in each section listed on the
checklist, and only the sections listed. The sections are referenced
by section number, not page number. You will skip many
sections.
Use the checklist to determine the order of the sections and
tasks.
Use the checklist to record your task progress and other
information.
Table 2-1 Select Your Task Checklist
Task Option |
Target System |
Source Media [1] |
Modifying Media |
Patch Option |
Checklist(s) to Use |
Patch Only | Local System | Tape | Tape |
PowerPatch |
A. Manage Patches or L. Using AUTOINST to Apply PowerPatch |
| | | | Reactive |
A. Manage Patches |
| | | | PowerPatch & Reactive |
A. Manage Patches |
| | Tape | Disk | PowerPatch | |
| | | | Reactive |
B. Manage Patches by Staging Area |
| | | |
PowerPatch & Reactive | |
| Remote system | Tape | Disk | PowerPatch |
B. Manage Patches by Staging Area
and C. Distributing Staging Areas to Remote |
| | | | Reactive | |
| | | | PowerPatch & Reactive |
|
Add-on SUBSYS products | Local system | Tape |
Tape | None |
D. Add-on with Tape |
| | | | PowerPatch |
E. Add-on with Tape and Manage Patches
or M. Using AUTOINST to Add-on and Apply PowerPatch |
| | | | Reactive |
D. Add-on with Tape
and A. Manage Patches |
| | | | PowerPatch & Reactive |
E. Add-on with Tape and Manage Patches |
| | CD-ROM | Tape | None |
F. Add-on with CD-ROM |
| | | | PowerPatch | |
| | | |
Reactive [2] |
F. Add-on with CD-ROM
and A. Manage Patches |
| | | | PowerPatch & Reactive |
|
Update OS and Add-on SUBSYS products | Local system |
Tape | Tape | None |
G. Update with Tape |
| | | | PowerPatch | |
| | | | Reactive |
G. Update with Tape
and A. Manage Patches |
| | | | PowerPatch & Reactive |
|
| | CD-ROM | Tape | None |
H. Update with CD-ROM |
| | | | PowerPatch | |
| | | | Reactive |
H. Update with CD-ROM
and A. Manage Patches |
| | | | PowerPatch & Reactive |
|
| Remote system | CD-ROM | Tape | None |
H. Update with CD-ROM &
I. Modify Remote Systems |
| | | | PowerPatch | |
| | | | Reactive |
H. Update with CD-ROM &
I. Modify Remote Systems &
A. Manage Patches |
| | | | PowerPatch & Reactive |
|
Reinstall OS | Local system | CSLT | Tape |
None |
J. Reinstall Using a CSLT |
New Install OS | Local system | Tape | Tape |
None |
K. Install a New System |
| | | | PowerPatch | |
| | | | Reactive |
K. Install a New System &
A. Manage Patches |
| | | | PowerPatch & Reactive |
|
[1]
Source media applies to SLT, FOS, and SUBSYS components. PowerPatches are
shipped on tape media. Reactive patches can be received through
electronic downloading.
[2]
You cannot apply Reactive patches at the same time you are updating
the system. You must first update the system, then apply Reactive
patches. To apply Reactive patches after you update your system,
refer to checklist A. Manage Patches. |
|