 |
» |
|
|
|
MESSAGE: None | CAUSE: Unable
to free the buffer passed to NetIPC associated with the inbound
datagram received (PARM = Result returned from bmgr_free_buffer). ACTION: See Appendix A “Submitting an SR ” of this manual. |
MESSAGE: None | CAUSE: The send
of the datagram open reply message to NetIPC failed (PARM = Result
code returned from send_msg). ACTION: See Appendix A “Submitting an SR ” of this manual. |
MESSAGE: None | CAUSE: Received
an invalid request code from an IPCCONTROL
intrinisic call (PARM = request code received from NetIPC). ACTION: Check the IPCCONTROL
call for correctness. If it is okay, see Appendix A “Submitting an SR ” of this manual. |
MESSAGE: None | CAUSE: Send to
NetIPC for the datagram close reply failed (PARM = Result code returned
by send_msg). ACTION: See Appendix A “Submitting an SR ” of this manual. |
MESSAGE: None | CAUSE: Call to
virtual space management to obtain an object for socket entries
failed (PARM = Result code from create_object
call). ACTION: See Appendix A “Submitting an SR ” of this manual. |
MESSAGE: None | CAUSE: Attempting
to open a socket with a SAP (address) that is already in use (PARM
= Address, which is already open, for this open request). ACTION: Check to ensure that
unique or well-known SAPs are being used. If OK, then see Appendix A “Submitting an SR ” of this manual. |
MESSAGE: None | CAUSE: Attempt
to free an object to virtual space management failed (PARM = Result
code from release_object call). ACTION: See Appendix A “Submitting an SR ” of this manual. |
MESSAGE: None | CAUSE: Send of
irrecoverable error acknowledgment to NetIPC failed (PARM = Result
code returned by send_msg). ACTION: See Appendix A “Submitting an SR ” of this manual. |
MESSAGE: None | CAUSE: Send of
irrecoverable error request to NetIPC failed (PARM = Result code
returned by send_msg). ACTION: See Appendix A “Submitting an SR ” of this manual. |
MESSAGE: None | CAUSE: Unable
to obtain a buffer to send a datagram and complete the request (PARM
= Result code returned from bmgr_get_buffer
call). ACTION: See Appendix A “Submitting an SR ” of this manual. |
MESSAGE: None | CAUSE: Attempt
to send the datagram send reply message to NetIPC failed (PARM =
Result code returned by send_msg). ACTION: See Appendix A “Submitting an SR ” of this manual. |
MESSAGE: None | CAUSE: Send of
datagram receive request to NetIPC failed (PARM = Result code returned
by send_msg). ACTION: See Appendix A “Submitting an SR ” of this manual. |
MESSAGE: None | CAUSE: Attempt
to send the datagram (outbound message) to IP failed (PARM = Result
code returned by send_msg). ACTION: See Appendix A “Submitting an SR ” of this manual. |
MESSAGE: None | CAUSE: Attempt
to write the UDP header into a buffer on an outbound datagram failed
(PARM = Status returned by bmgr_write_buffer). ACTION: See Appendix A “Submitting an SR ” of this manual. |
MESSAGE: None | CAUSE: Logging
the start of the UDP module (PARM = UDP's port ID). ACTION: Informative message. |
MESSAGE: None | CAUSE: Attempt
to add UDP to the ports data dictionary failed (PARM = Result code
from the dict_add call). ACTION: See Appendix A “Submitting an SR ” of this manual. |
MESSAGE: None | CAUSE: Attempt
to delete UDP from the ports MPE CM dictionary failed (PARM = Result
code returned by dict_delete call). ACTION: See Appendix A “Submitting an SR ” of this manual. |
MESSAGE: None | CAUSE: Attempt
to delete UDP from the ports MPE CM dictionary failed (PAttempt
to send the ICMP destination unreachable message to IP failed (PARM
= Result code returned by send_msg). ACTION: See Appendix A “Submitting an SR ” of this manual. |
MESSAGE: None | CAUSE: Attempt
to free an inbound buffer due to a shutdown pending failed (PARM
= Status returned by bmgr_free_buffer). ACTION: See Appendix A “Submitting an SR ” of this manual. |
MESSAGE: None | CAUSE: Attempt
to free an inbound buffer, because there is no more room in the
IPC buffer array, failed (PARM = Result code from bmgr_free_buffer). ACTION: See Appendix A “Submitting an SR ” of this manual. |
MESSAGE: None | CAUSE: UDP module
stopped. ACTION: Informative message |
MESSAGE: None | CAUSE: Send of
IPCControl reply message to NetIPC
failed (PARM = Result code from send_msg). ACTION: See Appendix A “Submitting an SR ” of this manual. |
MESSAGE: None | CAUSE: Conversion
of IPU dst to a native mode pointer
failed (PARM = Result code returned by convert_dst). ACTION: See Appendix A “Submitting an SR ” of this manual. |
MESSAGE: None | CAUSE: Attempt
to write user data into the buffer for the outbound datagram failed
(PARM = Result code returned by bmgr_write_buffer). ACTION: See Appendix A “Submitting an SR ” of this manual. |
MESSAGE: None | CAUSE: Invalid
request type for statistics (PARM = Request type). ACTION: Check the request
type in the call. If OK then see Appendix A “Submitting an SR ” of this manual. |
MESSAGE: None | CAUSE:A datagram
was received and discarded due to a checksum error (PARM = The SAP
for the destined datagram). ACTION: Check the sending
node for checksum correctness. See Appendix A “Submitting an SR ” of this manual. |
MESSAGE: None | CAUSE: Attempt
to free a buffer on an inbound datagram with a checksum error failed
(PARM = Status returned by bmgr_free_buffer). ACTION: See Appendix A “Submitting an SR ” of this manual. |
MESSAGE: None | CAUSE: Logging
of statistics for either a specific socket or UDP globals if the
transport is being stopped (PARM = SAP of socket being logged and
stopped). ACTION: None. Statistics. |
MESSAGE: None | CAUSE: Attempt
to write user's data to outbound buffer failed (PARM =
Result code returned by bmgr_write_buffer). ACTION: See Appendix A “Submitting an SR ” of this manual. |
MESSAGE: None | CAUSE: Attempt
to write user's data to outbound buffer failed (PARM =
Result code returned by bmgr_write_buffer). ACTION: See Appendix A “Submitting an SR ” of this manual. |
MESSAGE: None | CAUSE: Attempt
to write the IP options into the outbound buffer failed (PARM =
Result code returned by bmgr_write_buffer). ACTION: See Appendix A “Submitting an SR ” of this manual. |
MESSAGE: None | CAUSE: Attempt
to free a buffer when closing associated socket failed (PARM = Result
code returned by bmgr_write_buffer). ACTION: See Appendix A “Submitting an SR ” of this manual. |
MESSAGE: None | CAUSE: Attempt
to close the trace file for NetIPC tracing failed on the IPCControl
request (PARM = Status returned by nmclosetrace). ACTION: Check the IPCControl
intrinsic call. If OK, then see Appendix A “Submitting an SR ” of this manual. |
MESSAGE: None | CAUSE: Attempt
to close the trace file for NetIPC tracing failed when closing the
socket (PARM = Status returned by nmclosetrace). ACTION: See Appendix A “Submitting an SR ” of this manual. |
MESSAGE: None | CAUSE: Attempt
to initialize the semaphore lock for the statistics failed (PARM
= Status returned from cb_init). ACTION: See Appendix A “Submitting an SR ” of this manual. |
MESSAGE: None | CAUSE: Send of
the received ICMP message up to NetIPC failed (PARM = Status returned
by send_msg). ACTION: See Appendix A “Submitting an SR ” of this manual. |
MESSAGE: None | CAUSE: Failed
in attempting to re-obtain a path descriptor on verification for
a socket (PARM = Status returned by ns_path_resolve). ACTION: Check the IP address
and the network being used. If OK then see Appendix A “Submitting an SR ” of this manual. |
MESSAGE: None | CAUSE: Attempt
to get a path descriptor for the destination in the datagram send
request failed (PARM = Result code returned by ns_path_resolve). ACTION: Check the IP address
of the destination specified in the IPCSENDTO
call. Also make sure the necessary networks are started. If problems
persist then see Appendix A “Submitting an SR ”
of this manual. |
MESSAGE: None | CAUSE: The attempt
to resolve a path failed, most likely due to timeout during address
resolution (PARM = Result code returned by MAP in the path reply). ACTION: Check the IP address
of the destination given in the IPCSENDTO
call. Also make sure the necessary networks are started. If OK then
see Appendix A “Submitting an SR ” of this
manual. |
MESSAGE: None | CAUSE: Attempt
to send the reply to CP for a traceoff message failed (PARM = Result
code returned by send_msg). ACTION: See Appendix A “Submitting an SR ” of this manual. |
MESSAGE: None | CAUSE: Attempt
to send a reply to CP for a path verify message failed (PARM = Status
returned by send_msg). ACTION: See Appendix A “Submitting an SR ” of this manual. |
MESSAGE: None | CAUSE: Received
an inbound ICMP message from IP to be passed to an application (PARM
= ICMP error type and code). ACTION: Check if application
needs to handle this message (i.e., source quench or destination
unreachable). |
MESSAGE: None | CAUSE: Failure
in attempt to free the inbound buffer on a datagram for which no
SAP is open and no ICMP is sent since it is a broadcast IP address
(PARM = Status returned by bmgr_free_buffer). ACTION: See Appendix A “Submitting an SR ” of this manual. |
|