 |
» |
|
|
|
A- AAUTO command, Adding the Autoboot File to Your System's Configuration
- abort
- checking for, Checking for the Occurrence of a Dump
- handling, Handling an Occurrence of a Dump
- access current status, autoboot, Using the autoboot toggle
- ACCESS option, Using the BLDDUMP help facility
- account structure, Adding member volumes to a master volume set
- accounts
- TELESUP, Creating the HP36375 and DISKDUMP groups
- activating network services, Returning to a normal operating state
- activating NS3000/XL, Returning to a normal operating state
- adding
- autoboot file, Adding the Autoboot File to Your System's Configuration
- disk drives, Adding an AutoRestart/iX Disk Drive to Your System's Configuration
- drive paths, Adding an AutoRestart/iX Disk Drive to Your System's Configuration
- nonsystem volume sets, Configuring an AutoRestart/iX Nonsystem Volume Set
- ALL option, Using the BLDDUMP help facility
- alternate dump device strategy, Overview of Dump-to-Disk Configuration, Specify the alternate dump device strategy, Listing dump-to-disk information
- alternate path booting, Performing a Configuration Update
- ALTSIZE command, Managing the Dump-to-Disk and Mini-Dump Features, RESET command parameters, Altering the size of a dump file, ALTSIZE command example, Using the BLDDUMP help facility, Exiting the BLDDUMP utility, Periodically Checking Maximum Dump Size
- analysis, problem
- local, Introduction
- remote, Introduction
- analyzing
- dump file, PURGE command example, Reseting a dump file
- autoboot, Terminate dump
- adding, Adding the Autoboot File to Your System's Configuration
- configuration overview, Overview of Autoboot Configuration
- configuring, Configuring and Managing the Autoboot Feature
- current status, Using the autoboot toggle
- disable, Accessing the current status of autoboot
- disabling, Temporarily disabling autoboot
- disabling autoboot flag, Performing a Configuration Update
- disabling during install, Performing Updates or Installs
- disabling during update, Performing Updates or Installs
- enable, Accessing the current status of autoboot
- enabling flag, Performing a Configuration Update
- file, Terminate dump
- managing, Configuring and Managing the Autoboot Feature, Managing the Autoboot Feature
- overriding, Performing a Configuration Update
- status displayed, Toggling the autoboot flag
- toggle flag, Accessing the current status of autoboot
- turn off, Managing the Autoboot Feature
- turn on, Managing the Autoboot Feature
- AUTOBOOT command, Managing the Dump-to-Disk and Mini-Dump Features, Displaying the autoboot status, Disabling the autoboot flag
- autoboot feature, Autoboot feature
- adding autoboot file, Adding the Autoboot File to Your System's Configuration
- AUTOOUT file, Creating the Autoboot Format File
- configuration, Overview of AutoRestart/iX Installation and Configuration
- configuring, Configuring and Managing the Autoboot Feature
- deleting, Deleting the autoboot feature
- disabling, Temporarily disabling autoboot
- disabling autoboot flag, Performing a Configuration Update
- disabling flag, Disabling the autoboot flag
- enabling autoboot flag, Performing a Configuration Update
- format file, Creating the Autoboot Format File
- FORMAT utility, Creating the Autoboot Format File
- initial configuration, Configuring and Managing the Autoboot Feature
- management, Overview of AutoRestart/iX Installation and Configuration
- managing, Configuring and Managing the Autoboot Feature, Managing the Autoboot Feature
- modifying autoboot file, Modifying your autoboot sequence
- overriding, Performing a Configuration Update, Overriding the autoboot sequence at startup
- remove dependency on format file, Removing dependency on the autoboot format file
- removing, Deleting the autoboot feature
- testing configuration, Performing a Configuration Update
- autoboot file
- adding, Adding the Autoboot File to Your System's Configuration
- adding to system configuration, Adding the Autoboot File to Your System's Configuration
- confirming existence of, Adding the Autoboot File to Your System's Configuration
- deleting, Deleting the autoboot feature
- replacing, Adding the Autoboot File to Your System's Configuration
- autoboot flag
- disabling, Performing a Configuration Update, Disabling the autoboot flag
- enabling, Performing a Configuration Update
- autoboot format file
- creating, Creating the Autoboot Format File
- removing dependency on, Removing dependency on the autoboot format file
- autoboot sequence, overriding, Overriding the autoboot sequence at startup
- autoboot status, Listing dump-to-disk information, Listing mini-dump information, Displaying the autoboot status, Managing the Autoboot Feature
- autoboot toggle, Managing the Autoboot Feature
- AUTOIN file, Creating the Autoboot Format File
- automatic dump to tape, Checking for the Occurrence of a Dump
- automatic startup, Checking for the Occurrence of a Dump
- AUTOOUT file, Creating the Autoboot Format File
- AutoRestart/iX
- account structure, Adding member volumes to a master volume set
- autoboot, Autoboot feature, Terminate dump
- automatic dump to tape, Checking for the Occurrence of a Dump
- automatic startup, Checking for the Occurrence of a Dump
- backing up, Backing Up an AutoRestart/iX System
- BLDDUMP utility, Dump-to-disk feature, Defining Your Alternate Dump Device Strategy, Defining Your Protection Scheme, Configuring the Dump-to-Disk Feature, Checking for the Occurrence of a Dump
- configuration, Overview of AutoRestart/iX Installation and Configuration
- description, Introduction
- disabling, Resetting an AutoRestart/iX System
- disabling during install, Performing Updates or Installs
- disabling during update, Performing Updates or Installs
- disk space requirements, Determine the number of dump files required
- DTODSIZ utility, Dump-to-disk feature, Periodically Checking Maximum Dump Size
- dump-to-disk, Dump-to-disk feature, Configuring and Managing the Dump-to-Disk and Mini-Dump Features, Configuring the Dump-to-Disk Feature, Managing the Dump-to-Disk and Mini-Dump Features, Specify the alternate dump device strategy, Reseting a dump file
- features, Introduction
- FORMAT utility, Autoboot feature, Creating the Autoboot Format File
- installation, Overview of AutoRestart/iX Installation and Configuration
- managing, Managing Your AutoRestart/iX System
- nonsystem volume set, Configuring an AutoRestart/iX Nonsystem Volume Set
- overview, Introduction
- preparing your system, Overview of AutoRestart/iX Installation and Configuration
- resetting a system, Resetting an AutoRestart/iX System
- restart feature, Restart feature
- system requirements, Preparing Your System
- AutoRestart/iX disk drives
- configuring, Installing the AutoRestart/iX Disk Drive
- installing, Installing the AutoRestart/iX Disk Drive
B- backup
- AutoRestart/iX, Backing Up an AutoRestart/iX System
- dump file, Backing Up an AutoRestart/iX System
- scheduling, Halting System Activity
- tapes, Halting System Activity
- BLDDUMP commands, Managing the Dump-to-Disk and Mini-Dump Features, Using the BLDDUMP help facility
- ALTSIZE, Managing the Dump-to-Disk and Mini-Dump Features, Using the BLDDUMP help facility
- AUTOBOOT, Managing the Dump-to-Disk and Mini-Dump Features
- BUILD, Managing the Dump-to-Disk and Mini-Dump Features, Using the BLDDUMP help facility
- BUILDMD, Managing the Dump-to-Disk and Mini-Dump Features
- DO, Managing the Dump-to-Disk and Mini-Dump Features
- EXIT, Managing the Dump-to-Disk and Mini-Dump Features, Using the BLDDUMP help facility
- HELP, Managing the Dump-to-Disk and Mini-Dump Features, Using the BLDDUMP help facility
- INITMD, Managing the Dump-to-Disk and Mini-Dump Features
- LIST, Managing the Dump-to-Disk and Mini-Dump Features, Using the BLDDUMP help facility
- LISTMD, Managing the Dump-to-Disk and Mini-Dump Features
- LISTREDO, Managing the Dump-to-Disk and Mini-Dump Features
- PROTECT, Managing the Dump-to-Disk and Mini-Dump Features, Using the BLDDUMP help facility
- PURGE, Managing the Dump-to-Disk and Mini-Dump Features, Using the BLDDUMP help facility
- PURGEMD, Managing the Dump-to-Disk and Mini-Dump Features
- REDO, Managing the Dump-to-Disk and Mini-Dump Features
- RESET, Managing the Dump-to-Disk and Mini-Dump Features, Using the BLDDUMP help facility
- TAPE, Managing the Dump-to-Disk and Mini-Dump Features, Using the BLDDUMP help facility
- BLDDUMP help facility, Using the BLDDUMP help facility
- BLDDUMP utility, Dump-to-disk feature, Defining Your Alternate Dump Device Strategy, Defining Your Protection Scheme, Configuring the Dump-to-Disk Feature, Configuring the Mini-Dump Feature, Managing the Dump-to-Disk and Mini-Dump Features, BUILD command parameters, Purging a dump file, PURGE command example, Purging a mini-dump file, RESET command parameters, Altering the size of a dump file, PROTECT command parameters, Using the BLDDUMP help facility, Exiting the BLDDUMP utility, Periodically Checking Maximum Dump Size, Checking for the Occurrence of a Dump
- boot tape, Performing a Configuration Update
- creating, Adding the Autoboot File to Your System's Configuration
- booting
- from alternate path, Performing a Configuration Update
- from primary path, Performing a Configuration Update
- BUILD command, Defining Your Protection Scheme, Configuring the Dump-to-Disk Feature, Managing the Dump-to-Disk and Mini-Dump Features, Building a dump file, BUILD command example, RESET command parameters, Using the BLDDUMP help facility, Exiting the BLDDUMP utility
- BUILDMD command, Managing the Dump-to-Disk and Mini-Dump Features, Building a mini-dump file
- bypass full memory dump, Mini-dump feature
C- changes to configuration, holding, Adding an AutoRestart/iX Disk Drive to Your System's Configuration
- changing
- dump file size, Altering the size of a dump file
- protection schemes, Changing a dump file's protection scheme
- changing FASTSIZE, Performing a Configuration Update
- changing the autoboot file, Modifying your autoboot sequence
- checking
- dump size, Periodically Checking Maximum Dump Size
- dump-to-disk, Protection scheme alternatives
- checking FASTSIZE, Performing a Configuration Update
- checking for dump occurrence, Checking for the Occurrence of a Dump
- checking for dumps, Periodically Checking Maximum Dump Size
- checking for system abort, Checking for the Occurrence of a Dump
- commands
- AAUTO, Adding the Autoboot File to Your System's Configuration
- ALTSIZE, Managing the Dump-to-Disk and Mini-Dump Features, RESET command parameters, Altering the size of a dump file, ALTSIZE command example, Exiting the BLDDUMP utility, Periodically Checking Maximum Dump Size
- AUTOBOOT, Managing the Dump-to-Disk and Mini-Dump Features, Displaying the autoboot status, Disabling the autoboot flag
- BLDDUMP, Managing the Dump-to-Disk and Mini-Dump Features, Using the BLDDUMP help facility
- BUILD, Defining Your Protection Scheme, Configuring the Dump-to-Disk Feature, Managing the Dump-to-Disk and Mini-Dump Features, Building a dump file, BUILD command example, RESET command parameters, Exiting the BLDDUMP utility
- BUILDMD, Managing the Dump-to-Disk and Mini-Dump Features, Building a mini-dump file
- DO, Managing the Dump-to-Disk and Mini-Dump Features
- DSTAT, Create a master volume set, Adding member volumes to a master volume set
- DUMP, Autoboot feature
- EXIT, Adding an AutoRestart/iX Disk Drive to Your System's Configuration, Configuring the Dump-to-Disk Feature, Managing the Dump-to-Disk and Mini-Dump Features, Exiting the BLDDUMP utility
- HELP, Managing the Dump-to-Disk and Mini-Dump Features, Using the BLDDUMP help facility
- HOLD, Adding the Autoboot File to Your System's Configuration
- INITMD, Managing the Dump-to-Disk and Mini-Dump Features, Initializing a mini-dump file
- IO, Adding an AutoRestart/iX Disk Drive to Your System's Configuration
- ISL, Terminate dump
- JOBFENCE, Halting System Activity, Returning to a normal operating state
- KEEP, Adding the Autoboot File to Your System's Configuration
- LDEV, Adding an AutoRestart/iX Disk Drive to Your System's Configuration
- LIMIT, Halting System Activity, Returning to a normal operating state
- LIST, Protection scheme alternatives, Configuring the Dump-to-Disk Feature, Managing the Dump-to-Disk and Mini-Dump Features, Listing dump-to-disk information, Checking for the Occurrence of a Dump
- LISTACCT, Creating the HP36375 and DISKDUMP groups
- LISTGROUP, Creating the HP36375 and DISKDUMP groups
- LISTMD, Managing the Dump-to-Disk and Mini-Dump Features, Listing mini-dump information
- LISTREDO, Managing the Dump-to-Disk and Mini-Dump Features
- LPATH, Adding an AutoRestart/iX Disk Drive to Your System's Configuration
- NETCONTROL, Halting System Activity
- NEWACCT, Creating the HP36375 and DISKDUMP groups
- NEWGROUP, Creating the HP36375 and DISKDUMP groups
- NEWVOL, Adding member volumes to a master volume set
- NSCONTROL, Halting System Activity
- OCLOSE, Adding an AutoRestart/iX Disk Drive to Your System's Configuration
- OPENQ, Returning to a normal operating state
- PROTECT, Defining Your Protection Scheme, Managing the Dump-to-Disk and Mini-Dump Features, RESET command parameters, Changing a dump file's protection scheme
- PURGE, Managing the Dump-to-Disk and Mini-Dump Features, Purging a dump file, PURGE command example, Exiting the BLDDUMP utility
- PURGEGROUP, Creating the HP36375 and DISKDUMP groups
- PURGEMD, Managing the Dump-to-Disk and Mini-Dump Features, Purging a mini-dump file
- RAUTO, Adding the Autoboot File to Your System's Configuration, Removing dependency on the autoboot format file
- REDO, Managing the Dump-to-Disk and Mini-Dump Features
- RESET, Protection scheme alternatives, Managing the Dump-to-Disk and Mini-Dump Features, Reseting a dump file, Resetting an AutoRestart/iX System
- SCRATCHVOL, Create a master volume set, Adding member volumes to a master volume set
- SHOW, Adding the Autoboot File to Your System's Configuration
- SHOWDEV, Halting System Activity
- SHUTQ, Halting System Activity
- START, Restart feature, Performing a Configuration Update
- STORE, Backing Up an AutoRestart/iX System
- TAPE, Defining Your Alternate Dump Device Strategy, Configuring the Dump-to-Disk Feature, Managing the Dump-to-Disk and Mini-Dump Features, Specify the alternate dump device strategy, TAPE command parameters, Adding the Autoboot File to Your System's Configuration
- TELL, Halting System Activity
- VOLUTIL, Adding member volumes to a master volume set
- VOLUTIL NEWSET, Create a master volume set
- VSCLOSE, Configuring the Dump-to-Disk Feature, BUILD command example, PURGE command example, ALTSIZE command example, Exiting the BLDDUMP utility
- VSOPEN, Adding member volumes to a master volume set, Configuring the Dump-to-Disk Feature, PURGE command example, ALTSIZE command example, Exiting the BLDDUMP utility
- WARN, Halting System Activity
- CONFIG.SYS, Adding the Autoboot File to Your System's Configuration
- configuration
- adding autoboot file to, Adding the Autoboot File to Your System's Configuration
- autoboot, Overview of AutoRestart/iX Installation and Configuration
- default group, Adding the Autoboot File to Your System's Configuration
- dump-to-disk, Overview of AutoRestart/iX Installation and Configuration
- IO, Adding an AutoRestart/iX Disk Drive to Your System's Configuration
- preparing, Overview of Dump-to-Disk Configuration
- returning dump-to-disk to initial, Returning dump-to-disk to initial configuration
- volume sets, Adding member volumes to a master volume set
- configuration information, posting, Adding member volumes to a master volume set
- configuration update, Performing a Configuration Update
- configurator
- IO, Adding an AutoRestart/iX Disk Drive to Your System's Configuration
- configuring
- autoboot feature, Configuring and Managing the Autoboot Feature
- disk drives, Adding an AutoRestart/iX Disk Drive to Your System's Configuration, Installing the AutoRestart/iX Disk Drive
- dump file, Configuring the Dump-to-Disk Feature
- dump file, initially, Altering the size of a dump file
- dump-to-disk, Configuring and Managing the Dump-to-Disk and Mini-Dump Features
- dump-to-disk, initially, Configuring the Dump-to-Disk Feature
- groups, Creating the HP36375 and DISKDUMP groups
- mini-dump file, Configuring the Mini-Dump Feature
- mini-dump, initially, Configuring the Mini-Dump Feature
- nonsystem volume sets, Configuring an AutoRestart/iX Nonsystem Volume Set
- console
- control mode, Performing a Configuration Update
- using, Overview of Autoboot Configuration
- content status zero, Protection scheme alternatives
- control mode, entering, Performing a Configuration Update
- creating
- a boot tape, Adding the Autoboot File to Your System's Configuration
- an SLT, Adding the Autoboot File to Your System's Configuration
- autoboot format file, Creating the Autoboot Format File
- DISKDUMP group, Creating the HP36375 and DISKDUMP groups
- groups, Creating the HP36375 and DISKDUMP groups
- HP36375 group, Creating the HP36375 and DISKDUMP groups
- nonsystem volume sets, Configuring an AutoRestart/iX Nonsystem Volume Set
- the autoboot format file, Creating the Autoboot Format File
- volume sets, Create a master volume set
- criteria for SAT, Overview of mini-dump configuration
- critical data, protecting, Protecting Critical Data
- current status, autoboot, Using the autoboot toggle
D- data
- overwriting, Protecting Critical Data
- protecting, Protecting Critical Data
- default configuration group, Adding the Autoboot File to Your System's Configuration
- deleting the autoboot feature, Deleting the autoboot feature
- dependency on autoboot format file, Removing dependency on the autoboot format file
- DESC option, Using the BLDDUMP help facility
- directory information, posting, BUILD command example
- disable autoboot, Accessing the current status of autoboot
- disabling autoboot, Performing a Configuration Update, Temporarily disabling autoboot
- during install, Performing Updates or Installs
- during update, Performing Updates or Installs
- disabling AutoRestart/iX, Resetting an AutoRestart/iX System
- disabling the autoboot feature, Temporarily disabling autoboot
- disabling the autoboot flag, Disabling the autoboot flag
- disk drives
- adding, Adding an AutoRestart/iX Disk Drive to Your System's Configuration
- adding to system configuration, Adding an AutoRestart/iX Disk Drive to Your System's Configuration
- capacity, Determine the number of dump files required
- configuring, Determining Your Dump-to-Disk Needs, Adding an AutoRestart/iX Disk Drive to Your System's Configuration, Installing the AutoRestart/iX Disk Drive
- installing, Determining Your Dump-to-Disk Needs, Adding an AutoRestart/iX Disk Drive to Your System's Configuration, Installing the AutoRestart/iX Disk Drive
- number required, Determining Your Dump-to-Disk Needs
- disk space, for dump file, Backing Up an AutoRestart/iX System
- DISKDUMP.TELESUP group, Creating the HP36375 and DISKDUMP groups, Backing Up an AutoRestart/iX System
- creating, Creating the HP36375 and DISKDUMP groups
- installing, Creating the HP36375 and DISKDUMP groups
- DISKDUMP_VOLUME_SET, Configuring and Managing the Dump-to-Disk and Mini-Dump Features, Configuring the Dump-to-Disk Feature, Building a dump file, BUILD command example, Purging a dump file, PURGE command example, ALTSIZE command example, Exiting the BLDDUMP utility
- display status, autoboot, Displaying the autoboot status, Toggling the autoboot flag
- DO command, Managing the Dump-to-Disk and Mini-Dump Features
- drive paths, adding, Adding an AutoRestart/iX Disk Drive to Your System's Configuration
- DSTAT command, Create a master volume set, Adding member volumes to a master volume set
- DTODSIZ utility, Dump-to-disk feature, Estimate size of largest dump file, Use DTODSIZ utility to estimate largest dump size, BUILD command parameters, Altering the size of a dump file, ALTSIZE command parameters, Periodically Checking Maximum Dump Size
- estimating dump size, Use DTODSIZ utility to estimate largest dump size
- dump
- checking for, Periodically Checking Maximum Dump Size, Checking for the Occurrence of a Dump
- during or after install, Performing Updates or Installs
- during or after update, Performing Updates or Installs
- handling occurrence of, Handling an Occurrence of a Dump
- protecting critical data, Protecting Critical Data
- size, Defining Your Alternate Dump Device Strategy
- terminating, Defining Your Alternate Dump Device Strategy, Specify the alternate dump device strategy
- to tape, Defining Your Alternate Dump Device Strategy
- DUMP command, Autoboot feature
- dump device strategy, Overview of Dump-to-Disk Configuration, TAPE command parameters
- alternate, Specify the alternate dump device strategy, Listing dump-to-disk information
- specifying, TAPE command parameters
- dump facility, Terminate dump, Listing dump-to-disk information
- dump file, Configuring an AutoRestart/iX Nonsystem Volume Set, Defining Your Alternate Dump Device Strategy, Configuring the Dump-to-Disk Feature, Checking for the Occurrence of a Dump
- about, Determining Your Dump-to-Disk Needs
- analyzing, PURGE command example, Reseting a dump file
- backing up, Backing Up an AutoRestart/iX System
- building, BUILD command parameters
- changing size, Altering the size of a dump file
- configuring, Configuring the Dump-to-Disk Feature
- configuring initially, Altering the size of a dump file
- disk space, Backing Up an AutoRestart/iX System
- file size, Configuring the Dump-to-Disk Feature, BUILD command parameters
- fileid, Configuring the Dump-to-Disk Feature, Building a dump file, BUILD command parameters, PURGE command parameters, RESET command parameters, ALTSIZE command parameters, PROTECT command parameters
- listing information about, Listing dump-to-disk information
- managing, Configuring and Managing the Dump-to-Disk and Mini-Dump Features
- number, Building a dump file
- number required, Determine the number of dump files required
- overwriting, Defining Your Protection Scheme
- preallocation, Determining Your Dump-to-Disk Needs
- protected, Defining Your Protection Scheme, Protection scheme alternatives, Configuring the Dump-to-Disk Feature, BUILD command parameters, Changing a dump file's protection scheme, PROTECT command parameters, Listing dump-to-disk information
- purging, Purging a dump file, PURGE command example
- resetting, Reseting a dump file, Resetting an AutoRestart/iX System
- size, Terminate dump, Building a dump file, BUILD command parameters, Altering the size of a dump file, ALTSIZE command parameters, Listing dump-to-disk information
- size estimates, Estimate size of largest dump file, Use DTODSIZ utility to estimate largest dump size
- status, Listing dump-to-disk information
- unprotected, Defining Your Protection Scheme, Protection scheme alternatives, Changing a dump file's protection scheme, PROTECT command parameters
- zero contents, Dump-to-tape
- dump file size
- estimating, Periodically Checking Maximum Dump Size
- dump information
- risk of losing, Determine the number of dump files required
- dump size
- calculating, Estimate size of largest dump file, Use DTODSIZ utility to estimate largest dump size
- checking, Periodically Checking Maximum Dump Size
- estimating, Use DTODSIZ utility to estimate largest dump size, Periodically Checking Maximum Dump Size
- using DTODSIZ, Use DTODSIZ utility to estimate largest dump size
- dump strategy, Configuring the Dump-to-Disk Feature
- dump to tape, Cases Where Dump-to-Disk Does Not Work
- protecting critical data, Protecting Critical Data
- dump-to-disk, Configuring the Dump-to-Disk Feature, Managing the Dump-to-Disk and Mini-Dump Features, Specify the alternate dump device strategy, TAPE command parameters, Reseting a dump file
- configuring, Configuring and Managing the Dump-to-Disk and Mini-Dump Features
- during after update or install, Cases Where Dump-to-Disk Does Not Work
- during/after shutdown, Cases Where Dump-to-Disk Does Not Work
- initially configuring, Configuring the Dump-to-Disk Feature
- listing information, Listing dump-to-disk information
- managing, Configuring and Managing the Dump-to-Disk and Mini-Dump Features, Managing the Dump-to-Disk and Mini-Dump Features
- monitoring, Protection scheme alternatives
- when it doesn't work, Cases Where Dump-to-Disk Does Not Work
- dump-to-disk feature, Dump-to-disk feature
- configuration, Overview of AutoRestart/iX Installation and Configuration
- management, Overview of AutoRestart/iX Installation and Configuration
- needs analysis, Overview of AutoRestart/iX Installation and Configuration
- resetting test dump file, Returning dump-to-disk to initial configuration
- dump-to-disk files, Adding member volumes to a master volume set
- dump-to-disk needs, Determining Your Dump-to-Disk Needs
- dump-to-tape, Defining Your Alternate Dump Device Strategy, Specify the alternate dump device strategy, TAPE command parameters, Listing dump-to-disk information
E- enable autoboot, Accessing the current status of autoboot
- enabling the autoboot flag, Performing a Configuration Update
- estimating dump file size, Estimate size of largest dump file, Periodically Checking Maximum Dump Size
- using DTODSIZ, Use DTODSIZ utility to estimate largest dump size
- using number of active jobs/sessions, Estimate size of largest dump file
- using the DTODSIZ utility, Estimate size of largest dump file
- EXAMPLE option, Using the BLDDUMP help facility
- EXIT command, Adding an AutoRestart/iX Disk Drive to Your System's Configuration, Configuring the Dump-to-Disk Feature, Managing the Dump-to-Disk and Mini-Dump Features, Using the BLDDUMP help facility, Exiting the BLDDUMP utility
F- FASTSIZE
- checking, Performing a Configuration Update
- modifying, Performing a Configuration Update
- feature
- mini-dump, Mini-dump feature
- features
- autoboot, Autoboot feature
- dump-to-disk, Dump-to-disk feature
- restart, Restart feature
- file
- dump, Configuring the Dump-to-Disk Feature
- file size
- dump file, Configuring the Dump-to-Disk Feature, BUILD command parameters
- fileid
- dump file name, Configuring the Dump-to-Disk Feature, BUILD command parameters, PURGE command parameters, RESET command parameters, ALTSIZE command parameters, PROTECT command parameters
- files
- autoboot, Terminate dump
- dump, Configuring and Managing the Dump-to-Disk and Mini-Dump Features, Dump-to-tape, Terminate dump, Defining Your Protection Scheme
- dump-to-disk, Adding member volumes to a master volume set
- flag, toggle autoboot, Accessing the current status of autoboot
- format file, creating, Creating the Autoboot Format File
- FORMAT utility, Autoboot feature, Creating the Autoboot Format File
- use, Creating the Autoboot Format File
- full memory dump
- bypass, Mini-dump feature
H- halting system activity, Halting System Activity
- handling a system abort, Handling an Occurrence of a Dump
- handling dump occurrence, Handling an Occurrence of a Dump
- HELP command, Managing the Dump-to-Disk and Mini-Dump Features, Using the BLDDUMP help facility
- HOLD command, Adding the Autoboot File to Your System's Configuration
- holding configuration changes, Adding an AutoRestart/iX Disk Drive to Your System's Configuration
- HOMEVS option, Creating the HP36375 and DISKDUMP groups
- HP36375.TELESUP group, Creating the HP36375 and DISKDUMP groups
- creating, Creating the HP36375 and DISKDUMP groups
I- ID, dump file, Configuring the Dump-to-Disk Feature, Building a dump file, BUILD command parameters, PURGE command parameters, RESET command parameters, ALTSIZE command parameters, PROTECT command parameters
- identify repeat problems, Mini-dump feature
- information
- losing, Unprotected dump files
- posting, BUILD command example
- initial configuration
- autoboot feature, Configuring and Managing the Autoboot Feature
- returning dump-to-disk to, Returning dump-to-disk to initial configuration
- initialize mini-dump, Initializing a mini-dump file
- initialize SAT macro, Initialize the mini-dump contents.
- initializing, volume sets, Adding member volumes to a master volume set
- INITMD command, Managing the Dump-to-Disk and Mini-Dump Features, Initializing a mini-dump file
- install, Cases Where Dump-to-Disk Does Not Work
- after deleting autoboot file, Deleting the autoboot feature
- disabling AutoRestart/iX, Performing Updates or Installs
- installing
- disk drives, Adding an AutoRestart/iX Disk Drive to Your System's Configuration, Installing the AutoRestart/iX Disk Drive
- DISKDUMP.TELESUP, Creating the HP36375 and DISKDUMP groups
- groups, Creating the HP36375 and DISKDUMP groups
- IO command, Adding an AutoRestart/iX Disk Drive to Your System's Configuration
- IO configuration, Adding an AutoRestart/iX Disk Drive to Your System's Configuration
- IO configurator, Adding an AutoRestart/iX Disk Drive to Your System's Configuration
- ISL commands, Terminate dump
L- LDEV command, Adding an AutoRestart/iX Disk Drive to Your System's Configuration
- LIMIT command, Halting System Activity, Returning to a normal operating state
- limiting jobs/sessions, Halting System Activity
- LIST command, Protection scheme alternatives, Configuring the Dump-to-Disk Feature, Managing the Dump-to-Disk and Mini-Dump Features, Listing dump-to-disk information, Using the BLDDUMP help facility, Checking for the Occurrence of a Dump
- list of BLDDUMP commands, Managing the Dump-to-Disk and Mini-Dump Features
- LISTACCT command, Creating the HP36375 and DISKDUMP groups
- LISTGROUP command, Creating the HP36375 and DISKDUMP groups
- listing files, SYSGLIST, Adding an AutoRestart/iX Disk Drive to Your System's Configuration
- listing, dump-to-disk information, Listing dump-to-disk information
- listing, mini-dump information, Listing mini-dump information
- LISTMD command, Managing the Dump-to-Disk and Mini-Dump Features, Listing mini-dump information
- LISTREDO command, Managing the Dump-to-Disk and Mini-Dump Features
- log files, system console, Checking for the Occurrence of a Dump
- logging, system console, Checking for the Occurrence of a Dump
- LONER volume state, Create a master volume set, Adding member volumes to a master volume set
- losing, information, Unprotected dump files
- LPATH command, Adding an AutoRestart/iX Disk Drive to Your System's Configuration
M- managing
- AutoRestart/iX, Managing Your AutoRestart/iX System
- dump file, Configuring and Managing the Dump-to-Disk and Mini-Dump Features
- dump-to-disk, Configuring and Managing the Dump-to-Disk and Mini-Dump Features, Managing the Dump-to-Disk and Mini-Dump Features
- mini-dump, Initializing a mini-dump file
- the autoboot feature, Configuring and Managing the Autoboot Feature, Managing the Autoboot Feature
- member volumes, Adding member volumes to a master volume set
- memory dump
- bypass, Mini-dump feature
- mini-dump
- initialize, Initializing a mini-dump file
- initially configuring, Configuring the Mini-Dump Feature
- listing information, Listing mini-dump information
- managing, Initializing a mini-dump file
- mini-dump feature, Mini-dump feature
- mini-dump file
- configuring, Configuring the Mini-Dump Feature
- listing information about, Listing mini-dump information
- number, Building a mini-dump file
- purging, Purging a mini-dump file
- size, Building a mini-dump file, Listing mini-dump information
- status, Listing mini-dump information
- mini-dump output
- SAT, Overview of Mini-Dump Configuration
- modifying autoboot file, Modifying your autoboot sequence
- modifying FASTSIZE, Performing a Configuration Update
- monitoring
- dump-to-disk, Protection scheme alternatives
N- NETCONTROL command, Halting System Activity, Returning to a normal operating state
- network services
- activating, Returning to a normal operating state
- deactivating, Halting System Activity
- NEWACCT command, Creating the HP36375 and DISKDUMP groups
- NEWGROUP command, Creating the HP36375 and DISKDUMP groups
- newsize, dump file size, ALTSIZE command parameters
- NEWVOL command, Adding member volumes to a master volume set
- nonsystem volume sets, Dump-to-disk feature, Create a master volume set, Configuring and Managing the Dump-to-Disk and Mini-Dump Features, Configuring the Dump-to-Disk Feature, Building a dump file
- adding, Configuring an AutoRestart/iX Nonsystem Volume Set
- configuring, Configuring an AutoRestart/iX Nonsystem Volume Set
- creating, Configuring an AutoRestart/iX Nonsystem Volume Set
- normal system operation, returning to, Returning the System to Normal Operation
- NS3000/XL
- activating, Returning to a normal operating state
- deactivating, Halting System Activity
- NSCONTROL command, Halting System Activity, Returning to a normal operating state
- number of dump files allowed, Building a dump file
- number of mini-dump files allowed, Building a mini-dump file
O- OCLOSE command, Adding an AutoRestart/iX Disk Drive to Your System's Configuration
- off, autoboot, Managing the Autoboot Feature
- on, autoboot, Managing the Autoboot Feature
- ONVS option, Creating the HP36375 and DISKDUMP groups
- opening spooler queues, Returning to a normal operating state
- OPENQ command, Returning to a normal operating state
- operatorless environment, Terminate dump
- options
- ACCESS, Using the BLDDUMP help facility
- ALL, Using the BLDDUMP help facility
- DESC, Using the BLDDUMP help facility
- EXAMPLE, Using the BLDDUMP help facility
- HOMEVS, Creating the HP36375 and DISKDUMP groups
- ONVS, Creating the HP36375 and DISKDUMP groups
- PARMS, Using the BLDDUMP help facility
- USE, Using the BLDDUMP help facility
- orderly shutdown, Halting System Activity
- overriding
- autoboot, Overriding the autoboot sequence at startup
- AutoRestart/iX, Resetting an AutoRestart/iX System
- dump, Resetting an AutoRestart/iX System
- overriding autoboot, Performing a Configuration Update
- overview, autoboot configuration, Overview of Autoboot Configuration
- overwriting
- data, Protecting Critical Data
- dump file, Defining Your Protection Scheme
- information, Defining Your Protection Scheme
- protection from, Configuring the Dump-to-Disk Feature, BUILD command parameters, Changing a dump file's protection scheme
P- PARMS option, Using the BLDDUMP help facility
- performing a configuration update, Performing a Configuration Update
- performing a system shutdown, Halting System Activity
- performing an install, Deleting the autoboot feature
- posting
- directory information, BUILD command example
- posting configuration information, Adding member volumes to a master volume set
- preparation
- for configuration, Overview of Dump-to-Disk Configuration
- system, Overview of AutoRestart/iX Installation and Configuration, Preparing Your System
- preventing users from logging on, Halting System Activity
- primary path booting, Performing a Configuration Update
- problem analysis
- local, Introduction
- remote, Introduction
- problems
- identify repeating, Mini-dump feature
- product features, Introduction
- PROTECT command, Defining Your Protection Scheme, Managing the Dump-to-Disk and Mini-Dump Features, RESET command parameters, Changing a dump file's protection scheme, Using the BLDDUMP help facility
- protecting
- critical data, Protecting Critical Data
- dump file, Defining Your Protection Scheme, Protection scheme alternatives, Configuring the Dump-to-Disk Feature, BUILD command parameters, PROTECT command parameters
- from overwrites, Configuring the Dump-to-Disk Feature, BUILD command parameters, Changing a dump file's protection scheme
- protection schemes, Overview of Dump-to-Disk Configuration, Defining Your Protection Scheme, PROTECT command parameters, Listing dump-to-disk information
- alternatives, Protection scheme alternatives
- changing, Changing a dump file's protection scheme
- PURGE command, Managing the Dump-to-Disk and Mini-Dump Features, Purging a dump file, PURGE command example, Using the BLDDUMP help facility, Exiting the BLDDUMP utility
- PURGEGROUP command, Creating the HP36375 and DISKDUMP groups
- PURGEMD command, Managing the Dump-to-Disk and Mini-Dump Features, Purging a mini-dump file
- purging
- dump file, Purging a dump file, PURGE command example
- mini-dump file, Purging a mini-dump file
R- RAUTO command, Adding the Autoboot File to Your System's Configuration, Removing dependency on the autoboot format file
- REDO command, Managing the Dump-to-Disk and Mini-Dump Features
- removing dependency on autoboot format file, Removing dependency on the autoboot format file
- removing the autoboot feature, Deleting the autoboot feature
- repeat problems
- identify, Mini-dump feature
- replacing autoboot file, Adding the Autoboot File to Your System's Configuration, Removing dependency on the autoboot format file
- RESET command, Protection scheme alternatives, Managing the Dump-to-Disk and Mini-Dump Features, Reseting a dump file, Using the BLDDUMP help facility, Resetting an AutoRestart/iX System
- resetting
- dump file, Resetting an AutoRestart/iX System
- resetting a system, Resetting an AutoRestart/iX System
- resetting, dump file, Reseting a dump file
- restart
- feature, Restart feature
- option, Performing a Configuration Update, Overriding the autoboot sequence at startup
- your system, Performing a Configuration Update
- returning to normal operation, Returning the System to Normal Operation
S- SAT
- criteria specified, Overview of mini-dump configuration
- initialize macro, Initialize the mini-dump contents.
- mini-dump output, Overview of Mini-Dump Configuration
- output summary, Overview of Mini-Dump Configuration
- specify macro, Specify mini-dump criteria
- SAT utility, Specify mini-dump criteria, Create the autoboot file to invoke SAT
- saving changes to CONFIG.SYS, Adding the Autoboot File to Your System's Configuration
- saving configuration changes to disk, Adding the Autoboot File to Your System's Configuration
- scheduling a backup, Halting System Activity
- SCRATCH volume state, Create a master volume set, Adding member volumes to a master volume set
- SCRATCHVOL command, Create a master volume set, Adding member volumes to a master volume set
- sessions
- limiting, Returning to a normal operating state
- sessions, limiting, Halting System Activity
- SHOW command, Adding the Autoboot File to Your System's Configuration
- SHOWDEV command, Halting System Activity
- shutdown, Cases Where Dump-to-Disk Does Not Work
- dump-to-disk, Cases Where Dump-to-Disk Does Not Work
- NS3000/XL, Halting System Activity
- performing, Halting System Activity
- warning users, Halting System Activity
- SHUTQ command, Halting System Activity
- shutting down spool queues, Halting System Activity
- size
- dump, Defining Your Alternate Dump Device Strategy
- dump file, Terminate dump, Building a dump file, Periodically Checking Maximum Dump Size
- dumps, Periodically Checking Maximum Dump Size
- mini-dump file, Building a mini-dump file
- SLT, Performing a Configuration Update
- spooler queues
- opening, Returning to a normal operating state
- shutting down, Halting System Activity
- START command, Restart feature
- restart option, Performing a Configuration Update
- starting the system
- -R option, Restart feature
- startup state configurator, Returning to a normal operating state
- status
- autoboot, Listing dump-to-disk information, Listing mini-dump information, Displaying the autoboot status, Managing the Autoboot Feature, Using the autoboot toggle, Toggling the autoboot flag
- STORE command, Backing Up an AutoRestart/iX System
- store to tape, Protection scheme alternatives
- SYSFILE configurator, Adding the Autoboot File to Your System's Configuration
- SYSGEN, Adding the Autoboot File to Your System's Configuration
- AAUTO command, Adding the Autoboot File to Your System's Configuration
- creating an SLT, Adding the Autoboot File to Your System's Configuration
- exiting, Adding the Autoboot File to Your System's Configuration
- HOLD command, Adding the Autoboot File to Your System's Configuration
- KEEP command, Adding the Autoboot File to Your System's Configuration
- RAUTO command, Adding the Autoboot File to Your System's Configuration, Removing dependency on the autoboot format file
- saving changes to disk, Adding the Autoboot File to Your System's Configuration
- SHOW command, Adding the Autoboot File to Your System's Configuration
- SYSFILE configurator, Adding the Autoboot File to Your System's Configuration
- TAPE command, Adding the Autoboot File to Your System's Configuration
- SYSGLIST file, Adding an AutoRestart/iX Disk Drive to Your System's Configuration
- SYSSTART, Returning to a normal operating state
- system abort
- checking for, Checking for the Occurrence of a Dump
- during backup, Protecting Critical Data
- during restore, Protecting Critical Data
- during store, Protecting Critical Data
- handling, Handling an Occurrence of a Dump
- system activity, halting, Halting System Activity
- system configuration
- adding a disk drive to, Adding an AutoRestart/iX Disk Drive to Your System's Configuration
- adding autoboot file to, Adding the Autoboot File to Your System's Configuration
- system console logging, Checking for the Occurrence of a Dump
- system console, using, Overview of Autoboot Configuration
- system generator utility (SYSGEN), Adding the Autoboot File to Your System's Configuration
- system load tape, Performing a Configuration Update
- creating, Adding the Autoboot File to Your System's Configuration
- system preparation, Overview of AutoRestart/iX Installation and Configuration, Preparing Your System
- system requirements, Preparing Your System
- system shutdown, Halting System Activity
T- TAPE command, Defining Your Alternate Dump Device Strategy, Configuring the Dump-to-Disk Feature, Managing the Dump-to-Disk and Mini-Dump Features, Specify the alternate dump device strategy, TAPE command parameters, Using the BLDDUMP help facility, Adding the Autoboot File to Your System's Configuration
- tape drive, online during a system abort, Protecting Critical Data
- TELESUP account, Creating the HP36375 and DISKDUMP groups, Creating the Autoboot Format File
- TELL command, Halting System Activity
- telling users about a shutdown, Halting System Activity
- terminating dumps, Defining Your Alternate Dump Device Strategy, Specify the alternate dump device strategy
- test autoboot configuration, Performing a Configuration Update
- toggle
- autoboot, Managing the Autoboot Feature
- autoboot flag, Accessing the current status of autoboot
U- UNKNOWN volume state, Create a master volume set
- unprotected dump file, Defining Your Protection Scheme, Protection scheme alternatives
- update, Performing a Configuration Update, Cases Where Dump-to-Disk Does Not Work
- configuration, Performing a Configuration Update
- disabling AutoRestart/iX, Performing Updates or Installs
- USE option, Using the BLDDUMP help facility
- using the system console, Overview of Autoboot Configuration
- utilities
- BLDDUMP, Dump-to-disk feature, Defining Your Alternate Dump Device Strategy, Defining Your Protection Scheme, Configuring the Dump-to-Disk Feature, Configuring the Mini-Dump Feature, Managing the Dump-to-Disk and Mini-Dump Features, BUILD command parameters, Purging a dump file, PURGE command example, Purging a mini-dump file, RESET command parameters, Altering the size of a dump file, PROTECT command parameters, Using the BLDDUMP help facility, Exiting the BLDDUMP utility, Periodically Checking Maximum Dump Size, Checking for the Occurrence of a Dump
- DTODSIZ, Dump-to-disk feature, Estimate size of largest dump file, Use DTODSIZ utility to estimate largest dump size, BUILD command parameters, Altering the size of a dump file, ALTSIZE command parameters, Periodically Checking Maximum Dump Size
- FORMAT, Autoboot feature
- SAT, Create the autoboot file to invoke SAT
- utility
- SAT, Specify mini-dump criteria
V- volume sets
- configuration information, Adding member volumes to a master volume set
- creating, Create a master volume set
- initializing, Adding member volumes to a master volume set
- master volume, Create a master volume set
- member volumes, Adding member volumes to a master volume set
- volume states
- LONER, Create a master volume set, Adding member volumes to a master volume set
- SCRATCH, Create a master volume set, Adding member volumes to a master volume set
- UNKNOWN, Create a master volume set
- VOLUTIL, Create a master volume set, Adding member volumes to a master volume set
- VOLUTIL NEWSET command, Create a master volume set
- VSCLOSE command, Configuring the Dump-to-Disk Feature, BUILD command example, PURGE command example, ALTSIZE command example, Exiting the BLDDUMP utility
- VSOPEN command, Adding member volumes to a master volume set, Configuring the Dump-to-Disk Feature, PURGE command example, ALTSIZE command example, Exiting the BLDDUMP utility
|
