 |
» |
|
|
|
If you are installing NETUtil for the first time on your system
you can skip this section, and go to the section "Using NETUtil."
Beginning with HP-UX 10.0, ARPA Services will be the only valid
datacomm type for new and existing applications that run on the HP 9000
S700 or S800 client and/or server through ALLBASE/NET.
Therefore, you must change the alias
profiles in the AliasDB file on the client and the user
profiles in the NETUsers file on the HP-UX server.
You can use the migration commands MIGRATE ALIAS and MIGRATE USER
to change profiles where the client and/or
server is an HP9000 S700 or S800 and the datacomm type is NS.
You must have
superuser capability
to use the migration commands. The MIGRATE ALIAS command can be executed with either the automatic or
manual option. The automatic option changes all the alias
profiles. The manual option prompts you for changes to each alias
profile.
Listed below are the requirements for executing MIGRATE ALIAS
for automatic migration on the HP 9000 S700 and S800. If the requirements
are not met, you can use the manual migration option of the MIGRATE
ALIAS command. Automatic migration must occur before HP-UX 10.0 is installed on client and/or
server machines. The implementation of the MIGRATE ALIAS command for the
HP 9000 S700 and S800 will use NetIPC calls, and will require a connection
to the server. If HP-UX 10.0 is installed on either client
or server, the NetIPC calls won't exist.
Patch releases are available on HP-UX 9.0 and must be installed on
the HP 9000 S700 or S800 client. The patch release numbers are
phne_3502 (for S700) and phne_2288 (for S800).
Remote loopback must be enabled on the server machine for the
conversion of NS node name to ARPA host name to work.
The implementation of the MIGRATE ALIAS command on the HP 9000 S700
and S800 makes a connection to the remote loopback service on the server.
To setup remote loopback on an HP 9000 S700 or S800, the remote
loopback daemon, /etc/rlbdaemon, should be started in the
/etc/netlinkrc startup script. For more information on the
rlbdaemon, refer to the HP-UX Reference - Vol 3.
On an HP 3000, loopback should already be
started. If not, issue the command NETCONTROL START;NET=LOOP.
For more information see the HP 3000/iX Network Planning and
Configuration Guide.
 |  |  |  |  | NOTE:
Any HP 9000 S300 client on ALLBASE/SQL pre-G.0 accessing an HP 9000 S700 or
S800 server on ALLBASE/SQL G.0 and HP-UX 10.0 must use ARPA as the
datacomm type. However, you must use the CHANGE ALIAS
command to change the datacomm type from NS to ARPA, you cannot use the MIGRATE
ALIAS command. |  |  |  |  |
The migration commands create two files, a migration log file and a server
list file. Migration Log File |  |
Every time you execute and save the changes from MIGRATE ALIAS,
MIGRATE USER, MIGRATE ALIAS BACKWARD, OR MIGRATE USER BACKWARD, the
migrate log file
hpdamig.log
is appended. If the file does not exist it is created. After migration is successfully, you can delete the following temporary
files: Here is a sample log file for a client. The MIGRATE ALIAS BACKWARD
command returns the AliasDB file to its state before the 3:35 PM
migration.
TUE, APR 20, 1993, 3:35 PM: MIGRATE ALIAS
Alias: testdb1 Migrated Server : snode.sdomain.sorg -> snode
Cannot migrate alias (testdb2) for server (node1.dom.org) (DBERR 28029)
Alias: testdb3 Migrated Server : hana.dom.org -> hana1.site1.co1.domain1
Alias: testdb40 Migrated Server : merc.dom.org -> merc2
Alias: testdb41 Migrated Server : mach1.dom1.org1 -> mach1.site1.co1.dom1
Migration complete.
4 alias(es) migrated successfully.
1 alias(es) NOT migrated successfully - see above for error information.
TUE, APR 20, 1993, 3:40 PM: MIGRATE ALIAS BACKWARD
|
Here is a sample log file for a server. The MIGRATE USER BACKWARD
command returns the NETUsers file to its state before the 3:41 PM
migration.
TUE, APR 20, 1993, 3:40 PM: MIGRATE USER
Migrated Client : Umach.Udom.Uorg -> Umach.Usite.Uco.Udom
Login Name : user1.somegrp.someacct
Login Name : user2.somegrp.someacct
Migration complete.
2 user(s) migrated successfully.
0 user(s) NOT migrated successfully - see above for error information.
TUE, APR 20, 1993, 3:41 PM: MIGRATE USER
Migrated Client : mach2.dom.org -> mach2.site.co.domain
Login Name : user3.somegrp.someacct
Migration complete.
1 user(s) migrated successfully.
0 user(s) NOT migrated successfully - see above for error information.
TUE, APR 20, 1993, 3:45 PM: MIGRATE USER BACKWARD
|
Server List File |  |
Each alias profile that was changed to show a different datacomm
type requires that all corresponding user profiles on the server be
changed also. If you use MIGRATE ALIAS to change an alias profile, a
server list file,
/etc/dasvrlst,
is created and lists all affected corresponding servers for the
client. At the top of the file, the NS value and ARPA value (if it can be
determined by ALLBASE/NET) for the client node name are displayed. Here is a sample server list file.
Client Node Name (NS value) : cnode.cdom.corg
Client Node Name (ARPA value) : chost.site.co.domain
Server Node Name List (NS value, ARPA value) :
(snode.sdomain.sorg, snode)
(hana.dom.org, hana)
(merc.dom.org, merc2)
(mach1.dom1.org1, mach1)
|
|