 |
» |
|
|
|
Symbols- $NEWPASS file, System-defined files, Introduction, $NEWPASS and $OLDPASS, System-Defined designators
- $NULL file, $NULL, System-Defined designators
- $OLDPASS, Introduction
- $OLDPASS file, System-defined files, $NEWPASS and $OLDPASS, System-Defined designators
- $STDIN file, Temporary files, System-Defined designators
- $STDLIST file, Temporary files, System-Defined designators
A- aborting a job, Lesson 3 Creating and Streaming a Job File, Aborting a job
- ABORTJOB, Aborting a job
- acceptable variable names, Variable names
- access codes, Access Codes
- Append, Access Codes
- Execute, Access Codes
- Lock, Access Codes
- Read, Access Codes
- Write, Access Codes
- access control definition (ACD), Access Control Definitions, Removing All ACDs
- access to files, Access Codes
- account capabilities
- changing, Listing Account Information
- account management, Challenge Test
- account use, More Information About Account Groups
- ACD (access control definition), Access Control Definitions, Removing All ACDs
- ACTIVE state, Using PRINT to check for errors
- adding a new group, Adding a New Group (account manager)
- adding UDC files, Adding UDC files, Deleting UDC files
- alert system operators, TELL command and TELLOP command
- alias files, Formal files
- aliases, Introduction
- ALLOW, Suspending a job
- ALTACCT, Problems with MKACCT
- altering
- spool file, Using PRINT to check for errors
- altering a job, Lesson 3 Creating and Streaming a Job File, Altering a job
- altering group attributes, Altering Group Attributes (account manager)
- alternate label file, Formal files
- ALTGROUP, Altering Group Attributes (account manager), Problems with MKACCT
- ALTJOB, Altering a job
- ALTUSER, Problems with MKACCT, ALTUSER Command
- APPEND option, Introduction, Adding UDC files
- APPEND option to FCOPY, Exercise 4-2: appending one file to another
- appending files, Introduction, Exercise 4-2: appending one file to another
- arithmetic operations, Expressions
- ASCII file type, File data type
- assignments, group, Group Assignments (account manager)
- attributes
- group, Group Attributes
- group capability, Group Capability Attributes
- group file access, Group File Access Attributes
B- back up files, Store utility
- backreferencing file equations, Backreferencing
- batch file, Introduction
- batch processing, Introduction, Exercise 3-1: lesson 1 review
- commands, Batch processing commands
- blocking factor, Blocking factor
- Boolean values, Variable types
- BREAK/NOBREAK UDC option, Introduction, BREAK/NOBREAK option
- BREAKJOB, Suspending a job
- BUILD, Introduction, BUILD command
- BUILD command
- options, Other BUILD options
- building disk files, Lesson 2 Building Disk Files
- bytes in a record, Record size
C- CALC, Implicit dereferencing
- capabilities, User Capabilities
- account, Listing Account Information
- account librarian, Listing Account Information
- account manager, Introduction
- default, Listing Account Information, Group Capability Attributes
- group librarian, Listing Account Information
- user, System-defined variables
- capability requirements, Capability Requirements for Applications and Programs
- cataloging UDC files, Introduction, Cataloging and uncataloging UDC files
- change a variable value, INPUT command
- changing a user capability, ALTUSER Command
- changing password
- user, Password Security, ALTUSER Command
- CHGROUP, Creating or modifying a UDC, User-defined variables
- classes of variables, Variable types
- command
- ABORTJOB, Aborting a job
- ALLOW, Suspending a job
- ALTGROUP, Altering Group Attributes (account manager)
- ALTJOB, Altering a job
- ALTUSER, ALTUSER Command
- BREAKJOB, Suspending a job
- BUILD, Introduction, BUILD command
- CALC, Implicit dereferencing
- CHGROUP, Creating or modifying a UDC, User-defined variables
- COMMENT, COMMENT command
- CONTINUE, CONTINUE command
- COPY, Introduction, FCOPY and COPY commands
- DELETEVAR, Introduction, Deleting variables
- DO, WHILE loop
- ECHO, ECHO and variable dereferencing
- editor, Teaching exercise 3-3: creating a job file
- ENDWHILE, WHILE loop
- EOJ, EOJ command
- FCOPY, Introduction, Lesson 1 Using FCOPY, FCOPY and COPY commands
- FILE, Benefits of the FILE command
- HELP, Online help
- INPUT, INPUT command
- JOB, JOB command, User/account names/passwords
- LIMIT, Assigning and displaying variable values
- LISTACCT, Listing Account Information, Access Codes, Listing Account Passwords
- LISTEQ, Listing file equations, Writing file equations
- LISTFILE, Lesson 1 Introducing Files
- LISTFILE;TEMP, Listing temporary files, $NEWPASS and $OLDPASS
- LISTGROUP, More Information About Account Groups
- LISTUSER, Command Syntax and the LISTUSER Command
- NEWGROUP, Exercise 1-2: Using NEWGROUP (account manager)
- NEWUSER, NEWUSER Command
- PURGE, Purging temporary files
- PURGEGROUP, Purging a Group (account manager)
- PURGEUSER, PURGEUSER Command
- REPORT, Listing Groups in an Account
- RESET, Clearing file equations
- RESTORE, Introduction, Using RESTORE
- RESUMEJOB, Suspending a job
- SETCATALOG, Listing UDC files, Introduction, Creating or modifying a UDC
- SETVAR, Introduction, Assigning and displaying variable values, System-defined variables
- SHOWCATALOG, Listing UDC files, Reviewing UDCs, Creating or modifying a UDC, Adding UDC files
- SHOWJOB, More SHOWJOB information
- SHOWOUT, OUTCLASS parameter
- SHOWVAR, Introduction, Assigning and displaying variable values, System-defined variables, Deleting variables
- SPOOLF, Using PRINT to check for errors
- STORE, Introduction, Store utility, Using STORE
- STREAM, Introduction, Lesson 3 Creating and Streaming a Job File, Streaming a job, Displaying spool file information
- TELL, TELL command and TELLOP command
- TELLOP, TELL command and TELLOP command
- user, Review of user commands
- WHILE, WHILE loop, Exercise 6-3: while loop
- XEQ, Introduction, XEQ command
- command files, Types of user commands, Command files in this lesson
- conversion to UDC files, Why use a command file for user commands?
- ease of use, Why use a command file for user commands?
- invoking, Types of user commands
- LF, Command files in this lesson
- MKACCT, Using the MKACCT Command File to Create Accounts, Groups, and Users
- parameters, Introduction
- review, Introduction
- STATS, Command files in this lesson, Introduction
- why use, Why use a command file for user commands?
- command header names, Comparison of command files and udcs
- command interpreter, Lesson 6\The Command Interpreter, Introduction
- exercise for programmers, Teaching exercise 5-6 for programmers: using the command interpreter
- exercise for system managers, Teaching exercise 5-7 for system managers:\using the CI
- run, Using the CI
- using, Using the CI
- command sequences
- creating, Types of user commands
- executing, Types of user commands
- command syntax, Command Syntax and the LISTUSER Command
- connect time, Listing Groups in an Account
- conventions, logon, Conventions
- COPY, Introduction, FCOPY and COPY commands
- copy files from tape to a system, Introduction
- copy files to tape, Introduction, Store utility
- copying files, Introduction
- between accounts, Copying files between accounts
- between groups, Copying files between groups
- from disk to other devices, Copying files from disk to other devices
- to and from devices other than disk, Copying files to and from devices other than disk
- within an account, Copying files within an account
- copying functions, Introduction
- creating
- a directory of files on tape, Store utility
- a new user, NEWUSER Command
- a UDC, Creating or modifying a UDC
- accounts using MKACCT, Using the MKACCT Command File to Create Accounts, Groups, and Users
- command sequences, Types of user commands
- groups using MKACCT, Using the MKACCT Command File to Create Accounts, Groups, and Users
- spool files, SPOOLER commands
- users using MKACCT, Using the MKACCT Command File to Create Accounts, Groups, and Users
- creator
- listing, LISTFILE,3
- customized files
- create, Introduction
D- default
- capabilities, Listing Account Information, Group Capability Attributes
- density, Transporting files to a new system
- default parameter values, Multiple parameters
- defining default parameter values, Passing values by parameters
- DELETE option, Introduction, Deleting UDC files
- DELETEVAR, Introduction, Deleting variables
- deleting variables, Deleting variables
- density
- default, Transporting files to a new system
- tape drive, Transporting files to a new system
- dereferencing
- explicit, ECHO and variable dereferencing
- implicit, Explicit dereferencing, Implicit dereferencing
- variables, ECHO and variable dereferencing
- destination
- file, FCOPY and COPY commands
- location, Copying files between accounts
- device
- class names, Copying files to and from devices other than disk
- files, Formal files, Introduction
- device numbers
- assigned to input, JIN and JLIST columns
- assigned to output, JIN and JLIST columns
- directory search, Lesson 2 Understanding Search Priority and Search Path
- displaying
- a progress message, Hint
- job processing information, SHOWJOB parameters
- output files, Displaying spool file information
- session information, Logon UDCs
- spool file information, Displaying spool file information
- UDC command lines, LIST/NOLIST option
- DO, WHILE loop
- duplicate files, Copying files within an account
E- ECHO commands, ECHO and variable dereferencing
- EDIT/3000 commands, Teaching exercise 3-3: creating a job file
- editor comments, Teaching exercise 3-3: creating a job file
- empty file, System-Defined designators
- end a job, Teaching exercise 3-3: creating a job file
- ENDWHILE, WHILE loop
- EOJ, EOJ command
- erasing the original file from disk, Hint
- examining UDCs, HELP/NOHELP option
- executable code, $NEWPASS and $OLDPASS
- execute a command file, XEQ command
- execute the UDC, XEQ command
- executing command sequences, Types of user commands
- executing UDCs from a program, PROGRAM/\NOPROGRAM option
- explicit dereferencing, ECHO and variable dereferencing
- expressions, Challenge Test, Expressions
F- FCOPY, Introduction, Lesson 1 Using FCOPY, FCOPY and COPY commands
- file access attributes
- Append, Group File Access Attributes
- Execute, Group File Access Attributes
- Lock, Group File Access Attributes
- Read, Group File Access Attributes
- Save, Group File Access Attributes
- Write, Group File Access Attributes
- file characteristics, Introduction, BUILD command
- FILE command
- benefits, Benefits of the FILE command
- file designators
- backreferencing, Introduction
- equate with another system or file, Writing file equations
- equate with device, Writing file equations
- formal, Writing file equations
- system-defined, System-Defined designators
- file equations, Listing file equations, Introduction, Using STORE
- backreferencing, Backreferencing
- clearing, Clearing file equations
- point to other files or devices, Writing file equations
- set up, How to list a UDC
- using, Lesson 4 Using File Equations
- writing, Writing file equations
- file information
- access codes, LISTFILE,3
- by account, LISTFILE,4
- by file, LISTFILE,4
- by group, LISTFILE,4
- creation date, LISTFILE,3
- fully qualified file names, LISTFILE,6
- hex information, LISTFILE,-1
- modification date, LISTFILE,3
- space occupied, LISTFILE,2
- structure, LISTFILE,3
- file security, Access Control Definitions
- file transfer, Lesson 2 Storing and Restoring Files from Tape
- file type
- ASCII, File data type
- files
- alias, Formal files
- alternate label, Formal files
- building disk, Lesson 2 Building Disk Files
- create customized, Introduction
- device, Formal files
- formal, Formal files
- information on one file, LISTFILE,1
- introducing, Lesson 1 Introducing Files
- passwords, Lockword
- permanent, Lesson 1 Introducing Files, Permanent files
- security, Access Control Definitions, Lockword
- system-defined, System-defined files
- temporary, Lesson 1 Introducing Files, Temporary files
- user-defined, User-defined files
- formal file designators, Lesson 1 Introducing Files, Writing file equations
- formal files, Formal files, Introduction
- fully qualified file names, Copying files between accounts
H- header line, UDC, Reviewing UDCs
- header names,command, Comparison of command files and udcs
- header, UDC, Position of options
- HELP, Problems with MKACCT, Online help
- help
- online, Online help
- HELP/NOHELP UDC option, Introduction, HELP/NOHELP option
- hexadecimal integers, Variable types
- HPJOBCOUNT variable, Using variables in the STATS command file, ECHO and variable dereferencing
- HPJOBLIMIT variable, Assigning and displaying variable values, System-defined variables, Using variables in the STATS command file
- HPPATH variable, System-defined variables
- HPPROMPT variable, System-defined variables
- HPSESLIMIT variable, System-defined variables
- HPUSER variable, System-defined variables, Dereferencing examples
- HPVERSION variable, System-defined variables
I- IF-THEN-ELSE-ENDIF statement, Dereferencing examples
- implicit dereferencing, Explicit dereferencing, Implicit dereferencing
- increasing security, ALTUSER Command
- initiate the STORE process, Using STORE
- INPUT, INPUT command
- input
- files, System-defined files
- priority, Altering a job
- priority values, IPRI (input priority)
- integer variable types
- hexadecimal, Variable types
- octal, Variable types
- interpreter
- command, Lesson 6\The Command Interpreter
- invalid names, variable, Variable names
- invoking command files, Types of user commands
J- JLIMIT, JOBFENCE, JLIMIT, SLIMIT information
- JOB, JOB command, User/account names/passwords
- account name, User/account names/passwords
- logon group name, User/account names/passwords
- passwords, User/account names/passwords
- user name, User/account names/passwords
- job
- batch processing, advantages, Advantages of job/batch processing
- mode, Introduction
- number, Aborting a job
- priority, JOBFENCE, JLIMIT, SLIMIT information
- JOB command
- OUTCLASS parameter, OUTCLASS parameter
- RESTART parameter, RESTART parameter
- job files, Introduction
- COMMENT, COMMENT command
- CONTINUE, CONTINUE command
- creating, Introduction, Lesson 3 Creating and Streaming a Job File
- examining, Lesson 2 Examining a Job File
- modifying, Introduction
- streaming, Lesson 3 Creating and Streaming a Job File
- structure and use, Introduction
- job limit, STATS command file:
- job listing, OUTCLASS parameter
- JOBFENCE, JOBFENCE, JLIMIT, SLIMIT information
- jobs
- executing, JOBFENCE, JLIMIT, SLIMIT information
- introduction, Lesson 1 Introducing Jobs
L- LF command files, Command files in this lesson
- LIMIT, Assigning and displaying variable values
- limit, job, STATS command file:
- linker, $NEWPASS and $OLDPASS
- list
- information on a particular job, SHOWJOB parameters
- information on current jobs, SHOWJOB parameters
- job summary information, SHOWJOB parameters
- jobs scheduled, SHOWJOB parameters
- status of all jobs, SHOWJOB parameters
- list group passwords, Group Passwords (account manager)
- LIST/NOLIST UDC option, Introduction, LIST/NOLIST option
-
LISTACCT
, Listing Account Information, Access Codes, Problems with MKACCT
- LISTACCT command
- PASS parameter, Listing Account Passwords
- LISTEQ, Listing file equations, Writing file equations
- LISTFILE command
- options, LISTFILE command options
- parameters, Lesson 1 Introducing Files
- LISTFILE;TEMP, Listing temporary files, $NEWPASS and $OLDPASS
- LISTGROUP, More Information About Account Groups
- listing
- account information, Listing Account Information
- creator, LISTFILE,3
- file equations, Listing file equations
- groups, Listing Groups in an Account
- lockword, LISTFILE,3
- security information, Listing Account Information
- temporary files, Listing temporary files
- LISTSGROUP, Problems with MKACCT
- LISTSPF, Displaying spool file information
- LISTUSER, Problems with MKACCT, Command Syntax and the LISTUSER Command
- lockword, Lockword
- listing, LISTFILE,3
- logon
- passwords, Logon Password
- UDCs, Logon UDCs
- logon conventions, Conventions
- LOGON option, Why use a UDC file for user commands?, Logon UDCs
- LOGON/NOLOGON UDC option, LOGON option
M- managing
- users, Lesson 3 Managing Users
- managing account groups, Lesson 2 Managing Account Groups
- managing accounts
- adding a new group, Adding a New Group (account manager)
- listing account information, Challenge Test
- meaning of access codes, Challenge Test
- passwords, usage and security, Challenge Test
- mathematical operations, Expressions
- MKACCT, Problems with MKACCT
- MKACCT command file, Using the MKACCT Command File to Create Accounts, Groups, and Users
- modifying a UDC, Creating or modifying a UDC
- monitoring jobs, Lesson 4 Monitoring Jobs
- mounting tapes, Using STORE
O- object code, $NEWPASS and $OLDPASS
- octal integers, Variable types
- online
- help facility, Online help
- operations
- arithmetic, Expressions
- mathematical, Expressions
- relational, Expressions
- OPTION LOGON, Logon UDCs
- optional parameters, Command Syntax and the LISTUSER Command
- options
- position of, Position of options
- TRANSPORT, Transporting files to a new system
- options, UDC
- BREAK/NOBREAK, Introduction, BREAK/NOBREAK option
- HELP/NOHELP, Introduction, HELP/NOHELP option
- LIST/NOLIST, Introduction, LIST/NOLIST option
- LOGON, LOGON option
- PROGRAM/NOPROGRAM, Introduction, PROGRAM/\NOPROGRAM option
- RECURSION/NORECURSION, Introduction, RECURSION/\NORECURSION option, Exercise 5-3: RECURSION option
- OUTCLASS parameter of JOB, OUTCLASS parameter
- output
- files, System-defined files
- priority, Altering a job
- to disappear, $NULL
- output files
- displaying, Displaying spool file information
- overwriting $OLDPASS, Exercise 2-3: $OLDPASS
P- parameters
- benefits of, Benefits of parameters
- multiple, Multiple parameters
- optional, Command Syntax and the LISTUSER Command, Introduction, Optional and required parameters
- required, Introduction, Optional and required parameters
- STORE, STORE parameters
- TRANSPORT, Transporting files to a new system
- using, Lesson 5\using Parameters
- password security, Password Security
- passwords, User/account names/passwords
- group, Group Passwords (account manager)
- listing account, Listing Account Passwords
- logon, Logon Password
- user, Password Security, ALTUSER Command
- permanent files, Permanent files
- position of options, Position of options
- predefined variable names, System-defined variables
- priority
- for jobs, JOBFENCE, JLIMIT, SLIMIT information
- high, IPRI (input priority)
- input, Input priority, Altering a job
- low, IPRI (input priority)
- output, Altering a job
- processing and printing priorities
- input and output, Introduction
- PROGRAM/NOPROGRAM UDC option, Introduction, PROGRAM/\NOPROGRAM option
- prompt
- MPE XL, changing, System-defined variables
- protection
- password, Logon Password
- PURGE, Purging temporary files
- purge
- spool file, Using PRINT to check for errors
- PURGEGROUP, Purging a Group (account manager)
- PURGEUSER, PURGEUSER Command
- purging
- a group, Purging a Group (account manager)
- temporary files, Purging temporary files
R- recataloging UDC files, Creating or modifying a UDC
- record size, Record size
- record type
- fixed-length, Record type
- variable type, Record type
- RECURSION/NORECURSION UDC option, Introduction, RECURSION/\NORECURSION option, Exercise 5-3: RECURSION option
- redirecting output, Backreferencing
- referencing any UDC, RECURSION/\NORECURSION option
- relational operations, Expressions
- removing users, PURGEUSER Command
- REPORT, Listing Groups in an Account
- RESET, Clearing file equations
- RESTART parameter of JOB, RESTART parameter
- RESTORE, Using RESTORE
- restoring files from tape, Lesson 2 Storing and Restoring Files from Tape
- RESUMEJOB, Suspending a job
- resuming a job, Lesson 3 Creating and Streaming a Job File, Suspending a job
- reversing the STORE procedure, Using RESTORE
S- sample worksheet
- account structure, Using the MKACCT Command File to Create Accounts, Groups, and Users
- search
- directory, Lesson 2 Understanding Search Priority and Search Path
- path, Lesson 2 Understanding Search Priority and Search Path, Search path
- priority, Lesson 2 Understanding Search Priority and Search Path
- search priority, Introduction
- searching
- command directories, Command directory
- file directories, File directory
- UDC directories, UDC directory
- security
- file, Lockword
- files, Access Control Definitions
- password, Password Security
- security information, listing, Listing Account Information
- send a message, TELL command and TELLOP command
- session mode, Introduction
- sessions
- comparison, Comparison to sessions
- logged on, JOBFENCE, JLIMIT, SLIMIT information
- set JOBSECURITY, Suspending a job
- SETCATALOG, Listing UDC files, Introduction, Creating or modifying a UDC
- SETCATALOG command
- APPEND option, Adding UDC files
- DELETE option, Deleting UDC files
- SETVAR, Introduction, Assigning and displaying variable values, System-defined variables
- SHOWCATALOG, Listing UDC files, Reviewing UDCs, Creating or modifying a UDC, Adding UDC files
- SHOWJOB, More SHOWJOB information
- SHOWJOB command
- EXEC, More SHOWJOB information
- INTRO, More SHOWJOB information
- INTRODUCED, INTRODUCED and JOBNAME columns
- JIN, JIN and JLIST columns
- JLIST, JIN and JLIST columns
- JOBNAME, INTRODUCED and JOBNAME columns
- JOBNUM, More SHOWJOB information
- parameters, SHOWJOB parameters
- SCHED, More SHOWJOB information
- STATE, More SHOWJOB information
- SUSP, More SHOWJOB information
- WAIT, More SHOWJOB information
- SHOWOUT, OUTCLASS parameter
- SHOWVAR, Introduction, Assigning and displaying variable values, System-defined variables, Deleting variables
- simultaneous peripheral operations online, SPOOLER commands
- skeletal job file, Teaching exercise 3-3: creating a job file
- SLIMIT, JOBFENCE, JLIMIT, SLIMIT information
- source
- file, FCOPY and COPY commands
- location, Copying files between accounts
- specify an input priority, Teaching exercise 3-3: creating a job file
- spool file, SPOOLER commands
- altering, Using PRINT to check for errors
- purge, Using PRINT to check for errors
- spool file information
- displaying, Displaying spool file information
- spooler
- commands, SPOOLER commands
- SPOOLF
- command, Using PRINT to check for errors
- SPOOLF command
- DELETE, Using PRINT to check for errors
- standard input device, System-Defined designators
- standard output device, System-Defined designators
- STATS command file, Command files in this lesson, Introduction
- stopping UDC execution, BREAK/NOBREAK option
- STORE, Using STORE
- STORE command
- using, Using STORE
- STORE parameters, STORE parameters
- PROGRESS, STORE parameters
- PURGE, STORE parameters
- SHOW, STORE parameters
- storing
- files on tape, Lesson 2 Storing and Restoring Files from Tape
- system information, Variable types
- user information, Variable types
- STREAM, Introduction, Lesson 3 Creating and Streaming a Job File, Streaming a job, Displaying spool file information
- STREAM command
- options, STREAM Command Options
- STREAM options
- DATE, Streaming a job
- DAY, Streaming a job
- relative time, day, or date, Streaming a job
- TIME, Streaming a job
- streaming a job, Streaming a job
- substituting a variable, ECHO and variable dereferencing
- subsystem utilities
- RESTORE, Introduction
- STORE, Introduction
- suppress printing, Teaching exercise 3-3: creating a job file
- suspending a job, Lesson 3 Creating and Streaming a Job File, Suspending a job
- syntax, command, Command Syntax and the LISTUSER Command
- system type, Transporting files to a new system
- system-defined variables, Variable types, System-defined variables
T- tape labels, Transporting files to a new system
- TELL, TELL command and TELLOP command
- TELLOP, TELL command and TELLOP command
- temporary files, Temporary files
- $NEWPASS, System-defined files, Introduction, $NEWPASS and $OLDPASS
- $NULL$NULL, Introduction
- $OLDPASS, System-defined files, Introduction, $NEWPASS and $OLDPASS
- $STDIN, Temporary files
- $STDLIST, Temporary files
- concepts, Introduction
- creating system defined, Lesson 3 Creating Temporary Files
- displaying names, Introduction
- listing, Listing temporary files
- purging, Purging temporary files
- using to redirect output, Introduction
- terminate a job, EOJ command
- toggling between an editor and the OS, Introduction
- transferring files, Lesson 2 Storing and Restoring Files from Tape, Transporting files to a new system
- between locations, Store utility
- TRANSPORT option to STORE, Transporting files to a new system
- transporting files to a new system, Transporting files to a new system
- troubleshooting
- MKACCT, Problems with MKACCT
- types of variables
- integer, Variable types
- string, Variable types
U- UDC files, Types of user commands, Command files in this lesson
- adding, Adding UDC files, Deleting UDC files
- advantages, Why use a UDC file for user commands?
- automatic logon, Logon UDCs
- cataloging, Why use a command file for user commands?, Introduction, Cataloging and uncataloging UDC files
- characteristics, UDC characteristics
- creating, Creating or modifying a UDC
- introduction , Introduction
- listing, Listing UDC files, How to list a UDC
- LOGON option, Why use a UDC file for user commands?
- modifying, Creating or modifying a UDC
- parameters, Introduction
- print, Introduction
- recataloging, Creating or modifying a UDC
- uncataloging, Introduction, Creating or modifying a UDC, Cataloging and uncataloging UDC files
- why use, Why use a UDC file for user commands?
- UDC options
- BREAK/NOBREAK, Introduction, BREAK/NOBREAK option
- HELP/NOHELP, Introduction, HELP/NOHELP option
- LIST/NOLIST, Introduction, LIST/NOLIST option
- LOGON, LOGON option
- PROGRAM/NOPROGRAM, Introduction, PROGRAM/\NOPROGRAM option
- RECURSION/NORECURSION, Introduction, RECURSION/\NORECURSION option, Exercise 5-3: RECURSION option
- uncataloging UDC files, Introduction, Creating or modifying a UDC, Cataloging and uncataloging UDC files
- user
- changing password, Password Security, ALTUSER Command
- password, Password Security, ALTUSER Command
- user capabilities, User Capabilities
- user commands, Review of user commands
- user files, Permanent files
- user-defined commands, Types of user commands
- user-defined files, User-defined files
- user-defined variables, Variable types, User-defined variables
- user-related tasks, Lesson 3 Managing Users
- using
- MKACCT command file, Using the MKACCT Command File to Create Accounts, Groups, and Users
- using variables, Lesson 2 Using Variables and Expressions
- utilities
- FCOPY, FCOPY and COPY commands
- RESTORE, Introduction
- STORE, Introduction, Store utility
V- valid names, variables, Variable names
- variables, Challenge Test
- assigning, Assigning and displaying variable values
- Boolean, Variable types
- creating, Assigning and displaying variable values
- defining, Assigning and displaying variable values
- dereferencing, ECHO and variable dereferencing
- displaying, Assigning and displaying variable values
- HPJOBCOUNT, Using variables in the STATS command file, ECHO and variable dereferencing
- HPJOBLIMIT, Assigning and displaying variable values, System-defined variables, Using variables in the STATS command file
- HPPATH, System-defined variables
- HPPROMPT, System-defined variables
- HPSESLIMIT, System-defined variables
- HPUSER, System-defined variables, Dereferencing examples
- HPVERSION, System-defined variables
- invalid names, Variable names
- modifiable, System-defined variables
- names, Variable names
- names, acceptable, Variable names
- not modifiable, System-defined variables
- read only, System-defined variables
- read/write, System-defined variables
- system-defined, Introduction, Variable types, System-defined variables
- types, Variable types
- understanding, Challenge Test
- user-defined, Introduction, Variable types, User-defined variables
- using, Lesson 2 Using Variables and Expressions
- valid names, Variable names
- verifying
- a prompt, System-defined variables
- cataloging, Adding UDC files
- VERSION utility, Capability Requirements for Applications and Programs
- view selected UDCs, HELP/NOHELP option
|