 |
» |
|
|
|
|  |  |
The following are the error messages for Threshold Manager. - 1
- MESSAGE
An invalid resource was specified. (THMGRERR 1)
- CAUSE
The resource name specified is not recognized as a
valid resource.
- ACTION
Check the spelling of the resource specified or
execute a SHOW command to get a list of the resources recognized
by this utility.
- 2
- MESSAGE
Invalid control option or name was specified. (THMGRERR 2)
- CAUSE
The control value parameter is not a valid control option
or a recognizable control name.
- ACTION
Check the value of the option specified.
- 3
- MESSAGE
Threshold Manager function is invalid. (THMGRERR 3)
- CAUSE
The function passed to THMGRRES.PUB.SYS is invalid.
- ACTION
Restore a backup copy of the THMGRRES.PUB.SYS file.
- 4
- MESSAGE
Threshold Manager control procedure invalid. (THMGRERR 4)
- CAUSE
The control passed to THMGRCTL.PUB.SYS is invalid.
- ACTION
Restore a backup copy of the THMGRCTL.PUB.SYS file.
- 5
- MESSAGE
Resource name does not match an internal table resource. (THMGRERR 5)
- CAUSE
Internal error. It is possible that the file THMGRRES.PUB.SYS has become corrupted.
- ACTION
Restore a backup copy of the THMGRRES.PUB.SYS file.
- 6
- MESSAGE
Control option does not match an internal table control. (THMGRERR 6)
- CAUSE
Internal error. It is possible that the file THMGRCTL.PUB.SYS has become corrupted.
- ACTION
Restore a backup copy of the THMGRCTL.PUB.SYS file.
- 7
- MESSAGE
Information provided with resource does not match. (THMGRERR 7)
- CAUSE
Internal error. It is possible that the file THMGRRES.PUB.SYS has become corrupted.
- ACTION
Restore a backup copy of the THMGRRES.PUB.SYS file.
- 8
- MESSAGE
Control information does not match resource. (THMGRERR 8)
- CAUSE
Internal error. It is possible that the file THMGRCTL.PUB.SYS has become corrupted.
- ACTION
Restore a backup copy of the THMGRCTL.PUB.SYS file
- 9
- MESSAGE
Communication error with Threshold Manager. (THMGRERR 9)
- CAUSE
A communication error occurred with the Threshold Manager.
- ACTION
Exit the program and restart the application.
- 10
- MESSAGE
Duplicate threshold information. (THMGRERR 10)
- CAUSE
The threshold value specified is already part of the current
configuration for this resource.
- ACTION
Check the current configuration for this resource, and enter the
correct threshold value.
- 11
- MESSAGE
The number of thresholds is at maximum capacity. (THMGRERR 11)
- CAUSE
Internal error. The table which holds the thresholds is at
maximum capacity.
- ACTION
Delete the unnecessary thresholds and try again.
- 12
- MESSAGE
Threshold does not exist. (THMGRERR 12)
- CAUSE
The threshold value supplied for this resource is non-existent.
- ACTION
Check the current configuration of this resource by using the
SHOW command and enter the correct threshold value.
- 13
- MESSAGE
Threshold Manager encountered an unknown error. (THMGRERR13)
- CAUSE
A trap has been detected from another external procedure.
- ACTION
None
- 14
- MESSAGE
Creation of the Threshold Manager process failed. (THMGRERR 14)
- CAUSE
Creation of the Threshold Manager process failed during
the program initialization.
- ACTION
Exit the program and restart the application.
- 16
- MESSAGE
Threshold Manager process is not active. (THMGRERR 16)
- CAUSE
The Threshold Manager process failed during program
initialization.
- ACTION
Exit the program and restart the application.
- 17
- MESSAGE
The new control option is invalid. (THMGRERR 17)
- CAUSE
Internal error. It is possible that the file
THMGRCTL.PUB.SYS has become corrupted.
- ACTION
Restore a backup copy of the THMGRCTL.PUB.SYS file.
- 18
- MESSAGE
Invalid threshold value was specified. (THMGRERR 18)
- CAUSE
The threshold value provided with this resource does not
match the previously configured threshold value.
- ACTION
Check the current configuration of this resource by using the
SHOW command and enter the correct threshold value.
- 19
- MESSAGE
Invalid frequency was specified. (THMGRERR 19)
- CAUSE
The time interval specified is not valid.
- ACTION
Enter the command again with a valid time interval between 25
and 3600 seconds.
- 52
- MESSAGE
Request for enabling a resource has been denied. (THMGRERR 52)
- CAUSE
The resource information on internal tables was found to be
incomplete or inconsistent. There could be data corruption.
- ACTION
Delete all the thresholds for this resource and reconfigure.
- 53
- MESSAGE
Threshold Manager process is dead. (THMGRERR 53)
- CAUSE
The Threshold Manager process aborted for some unknown reason.
- ACTION
Exit the program and restart the application.
- 101
- MESSAGE
Bad procedure label encountered while monitoring the
usage-level of resource "!". (THMGRERR 101)
- CAUSE
Threshold Manager internal error. Note that the resource name may not
be the same in all occurrances of this error.
- ACTION
Disable Threshold Manager and restart.
- 102
- MESSAGE
Bad procedure label encountered while executing the jumpoff
procedure for control. (THMGRERR 102)
- CAUSE
Threshold Manager internal error.
- ACTION
Disable Threshold Manager and restart.
- 103
- MESSAGE
Bad procedure label encountered while executing the fallback
procedure for control. (THMGRERR 103)
- CAUSE
Threshold Manager internal error.
- ACTION
Disable Threshold Manager and restart.
- 104
- MESSAGE
Failed while sending a message to port!. (THMGRERR 104)
- CAUSE
Threshold Manager internal error.
- ACTION
Disable Threshold Manager and restart.
- 105
- MESSAGE
Failed while receiving a message from port !. (THMGRERR 105)
- CAUSE
Threshold Manager internal error.
- ACTION
Disable Threshold Manager and restart.
- 106
- MESSAGE
Failed to create port !. (THMGRERR 106)
- CAUSE
Threshold Manager internal error.
- ACTION
Disable Threshold Manager and restart.
- 107
- MESSAGE
Encountered a trap. (THMGRERR 107)
- CAUSE
Threshold Manager internal error.
- ACTION
Disable Threshold Manager and restart.
- 108
- MESSAGE
Encountered error during dynamic call of the usage-monitoring procedure for resource. (THMGRERR 108)
- CAUSE
Threshold Manager internal error occurred during a dynamic
call to a procedure.
- ACTION
Disable Threshold Manager and restart.
- 109
- MESSAGE
Encountered error during dynamic call of the jump off
procedure for control. (THMGRERR 109)
- CAUSE
Threshold Manager internal error occurred during a dynamic
call to a procedure.
- ACTION
Disable Threshold Manager and restart.
- 110
- MESSAGE
Encountered error during dynamic call of the fall back
procedure for control. (THMGRERR 110)
- CAUSE
Threshold Manager internal error occurred during a dynamic
call to a procedure.
- ACTION
Disable Threshold Manager and restart.
- 111
- MESSAGE
My adoption by progen failed. (THMGRERR 111)
- CAUSE
Threshold Manager internal error.
- ACTION
Disable Threshold Manager and restart.
- 112
- MESSAGE
Initialization of internal tables failed. (THMGRERR 112)
- CAUSE
Threshold Manager internal error.
- ACTION
Disable Threshold Manager and restart.
- 113
- MESSAGE
Encountered bad jumpoff count for control "!". (THMGRERR 113)
- CAUSE
Threshold Manager internal error.
- ACTION
Disable Threshold Manager and restart.
- 118
- MESSAGE
Invalid table header or not a table header
corresponding to resource "!". (THMGRERR 118)
- CAUSE
Threshold Manager internal error.
- ACTION
Disable Threshold Manager and restart.
- 119
- MESSAGE
Unauthorized attempt to create the manager. (THMGRERR 119)
- CAUSE
Threshold Manager internal error.
- ACTION
Disable Threshold Manager and restart.
- 201
- MESSAGE
The resource name specified is not valid. (THMGRERR 201)
- CAUSE
The resource name is not one of the resource names
recognized by this utility.
- ACTION
Enter a resource name recognized by this utility. To see a
list of valid resource names use the SHOW command.
- 202
- MESSAGE
No additional THRESHOLDS may be set for this resource. (THMGRERR 202)
- CAUSE
An attempt was made to add more than the allowable number of threshold values
to a particular resource.
- ACTION
Either modify one of the existing thresholds or delete it
and add a new threshold for this resource.
- 203
- MESSAGE
Non-existent threshold value for a valid resource. (THMGRERR 203)
- CAUSE
A non-existent threshold value was specified for a valid resource.
- ACTION
Enter the correct threshold value for this resource. Use
the SHOW command to see what the current values are for any resource.
- 204
- MESSAGE
The threshold value should be between 1 and 100. (THMGRERR 204)
- CAUSE
A threshold value greater than 100 or less than 1 was entered.
- ACTION
Enter a threshold value between 1 and 100.
- 207
- MESSAGE
Threshold Manager must be ENABLED for this command. (THMGRERR 207)
- CAUSE
An attempt was made to execute a command that requires the
Threshold Manager process to be enabled.
- ACTION
Enable the Threshold Manager using the ENABLEMANAGER command.
- 208
- MESSAGE
An invalid control option was specified. (THMGRERR 208)
- CAUSE
An invalid control option value was specified with this command.
- ACTION
Enter the command again with a valid control value.
- 209
- MESSAGE
An invalid notification option was specified. (THMGRERR 209)
- CAUSE
An invalid value for a notification option was entered.
- ACTION
Enter the command again with a valid notification value.
- 212
- MESSAGE
Cannot enter duplicate threshold values for a resource. (THMGRERR 212)
- CAUSE
The threshold value entered is the same as a currently configured
threshold for this resource.
- ACTION
Check to make sure the resource is correct, then either modify
the current value or delete it and add it again.
- 300
- MESSAGE
Subsys !, Info: ! (THMGRERR 300)
- CAUSE
Unexpected error occurred, subsystem and subsystem error displayed.
- ACTION
None. HP internal support required to rectify this problem.
- 302
- MESSAGE
Parameter is missing. (THMGRERR 302)
- CAUSE
An input parameter to the command is missing.
- ACTION
Use the HELP facility for this command or use the manual
and enter the command again.
- 303
- MESSAGE
Parameter length is invalid. (THMGRERR 303)
- CAUSE
The input parameter size exceeds the size allowed for this parameter.
- ACTION
Use the HELP facility for this command or use the manual
and enter the command again.
- 303
- MESSAGE
Parameter composition is invalid. (THMGRERR 304)
- CAUSE
The input parameter is not correct.
- ACTION
Use the HELP facility for this command or use the manual
and enter the command again.
- 305
- MESSAGE
Parameter is invalid. (THMGRERR 305)
- CAUSE
The input parameter type is not correct. A numeric input
parameter can only be accepted for numeric arguments, and a string
parameter for string arguments.
- ACTION
Use the HELP facility for this command or use the manual
and enter the command again.
- 307
- MESSAGE
Info is invalid. (THMGRERR 307)
- CAUSE
The information passed to this program via the ";INFO="
parm in the RUN command is invalid.
- ACTION
- 309
- MESSAGE
Failed to open the message catalog. (THMGRERR 309)
- CAUSE
Unable to open, or possibly find the catalog associated
with this utility.
- ACTION
Restore the message catalog (TMCATnnn, where nnn
is the native language ID number of the machine) from backup tapes and continue.
- 310
- MESSAGE
Invalid character. (THMGRERR 310)
- CAUSE
Invalid character detected in the command line.
- ACTION
Enter command again.
- 315
- MESSAGE
Parameter length overflow. (THMGRERR 315)
- CAUSE
The input parameter size exceeds the size allowed for this parameter.
- ACTION
Use the HELP facility for this command or use the manual
and enter the command again.
- 321
- MESSAGE
Invalid REDO command. (THMGRERR 321)''
- CAUSE
Cannot find the command to redo, it is either invalid or
has been pushed off the top of the stack and is no longer accessible.
- ACTION
Enter the command again.
- 324
- MESSAGE
Cannot recognize the command passed to HELP. (THMGRERR 324)
- CAUSE
Cannot find the command to provide help.
- ACTION
Use the HELP summary to identify which command it should
be and enter the command again. The HELP summary is accessed by issuing
the command HELP without arguments.
- 328
- MESSAGE
*Error: Out of Heap space. (THMGRERR 328)
- CAUSE
Cannot get the additional space necessary to execute.
- ACTION
Run the program again specifying a larger NMHEAP size.
- 330
- MESSAGE
Security violation. (THMGRERR 330)
- CAUSE
The user does not have the privilege level necessary to execute
this command.
- ACTION
Obtain the necessary privilege level and try again.
- 331
- MESSAGE
Failed to open exclusively. (THMGRERR 331)
- CAUSE
This program is being accessed by someone else at this time.
- ACTION
Wait until the program is available for exclusive access.
- 333
- MESSAGE
Cannot deallocate space. (THMGRERR 333)
- CAUSE
An internal error occurred which will not allow the program
to deallocate space.
- ACTION
Try the command again.
- 334
- MESSAGE
Failed to get the run parameter. (THMGRERR 334)
- CAUSE
The program failed on access of the ";PARM=" argument of the
RUN command.
- ACTION
Try the command again. Use the CI HELP facility for the RUN command.
- 335
- MESSAGE
HPMYPROGAM failed. (THMGRERR 335)
- CAUSE
The program call to HPMYPROGRAM intrinsic to get the program's name failed.
- ACTION
Exit the program and try again.
- 336
- MESSAGE
Trying to open the program a second time. (THMGRERR 336)
- CAUSE
More than one access to the program is not allowed.
- ACTION
Wait until the program is available for exclusive access.
- 337
- MESSAGE
Only one user is allowed to configure thresholds. (THMGRERR 337)
- CAUSE
Exclusive access to the configuration data is required.
- ACTION
Wait until the program is available for exclusive access.
- 338
- MESSAGE
Threshold Manager must be enabled. (THMGRERR 338)
- CAUSE
This command requires Threshold Manager to be enabled.
- ACTION
Execute the command ENABLEMANAGER and try the command again.
- 401
- MESSAGE
Incomplete command pending on end-of-file. (THMGRERR 401)
- CAUSE
The program has encountered EOF on the redirected output file.
- ACTION
Create a larger output file and execute command again.
- 402
- MESSAGE
Unable to process the command. (THMGRERR 402)
- CAUSE
An error occurred while attempting to process a command.
- ACTION
Enter the command again.
- 403
- MESSAGE
Invalid parameter length. (THMGRERR 403)
- CAUSE
The input parameter size exceeds the size allowed for this parameter.
- ACTION
Use the HELP facility for this command or use the manual and
enter the command again.
- 404
- MESSAGE
Command history stack is empty. (THMGRERR 404)
- CAUSE
An attempt was made to use the REDO facility when no other
commands have executed.
- ACTION
Enter the command directly.
- 405
- MESSAGE
Command not found in command history stack. (THMGRERR )
- CAUSE
The requested command was not found in the command history stack.
- ACTION
Enter the command directly.
- 406
- MESSAGE
Invalid parameter length or composition. (THMGRERR 406)
- CAUSE
An error was detected in the argument provided, either the
length is invalid or it is the wrong type.
- ACTION
Use the HELP facility for this command or use the manual
and enter the command again.
- 407
- MESSAGE
Unrecognized command. (THMGRERR 407)
- CAUSE
The command entered is not a valid command.
- ACTION
Use the HELP summary to identify which command it should
be, and enter the command again. The HELP summary is accessed by issuing
the command HELP without any arguments.
- 409
- MESSAGE
This command has no associated functionality. (THMGRERR 409)
- CAUSE
An invalid command was entered.
- ACTION
None.
- 410
- MESSAGE
Error in accessing the message catalog. (THMGRERR 410)
- CAUSE
An error occurred accessing the message catalog for a
particular message.
- ACTION
Restore the message catalog (TMCATnnn, where nnn
is the native language ID number of the machine) from backup tapes and continue.
- 411
- MESSAGE
Invalid numeric index into command history stack. (THMGRERR 411)
- CAUSE
The numeric argument provided with the REDO command
points to an entry that does not exist or that has been pushed off the
top of the stack.
- ACTION
Enter the command directly.
- 412
- MESSAGE
Command name length exceeds 16 characters. (THMGRERR 412)
- CAUSE
A command was entered which exceeded the allowable length
for a command.
- ACTION
Enter the command again and insert spaces between the
comand and the arguments.
- 413
- MESSAGE
Insufficient capabilities to execute this command. (THMGRERR 413)
- CAUSE
The user does not have the required privilege level to
execute this command.
- ACTION
Obtain the privilege level required to execute this
command and try again.
- 414
- MESSAGE
A required parameter was not specified in command. (THMGRERR 414)
- CAUSE
A required parameter is missing from the command input.
- ACTION
Use the HELP facility for this command or use the
manual and enter the command again.
- 415
- MESSAGE
This parameter can consist of numeric characters only. (THMGRERR 415)
- CAUSE
A non-numeric character was entered for a numeric value.
- ACTION
Enter the command again with a valid numeric value.
- 416
- MESSAGE
Depth of command stack can only be in the range 1 to 100. (THMGRERR 416)
- CAUSE
An attempt was made to create a history stack greater than
100 or less than 1.
- ACTION
None.
- 417
- MESSAGE
Invalid key specified with REDO command. (THMGRERR 417)
- CAUSE
An invalid key was entered during a REDO of a previous command.
- ACTION
Enter the command again.
- 418
- MESSAGE
Command only valid in interactive mode. (THMGRERR 418)
- CAUSE
A command was entered in a job, but it can only be executed
during an interactive session.
- ACTION
Execute the command after logging on interactively.
- 420
- MESSAGE
Invalid command edit operation. (THMGRERR 420)
- CAUSE
There was an invalid input while editing a command from the REDO
history stack.
- ACTION
Edit the command again.
- 501
- MESSAGE
Unexpected error returned from FFILEINFO intrinsic. (THMGRERR 501)
- CAUSE
An internal error occurred while attempting to get information
on a file.
- ACTION
Check the file system errors and correct the error. Enter
the command again.
- 502
- MESSAGE
Unable to close the INPUT file. (THMGRERR 502)
- CAUSE
An error occurred during the FCLOSE of the input file.
- ACTION
Check the file system errors and correct the error. Try
the command again.
- 503
- MESSAGE
Unable to close the OUTPUT file. (THMGRERR 503)
- CAUSE
An error occurred during the FCLOSE of the output file.
- ACTION
Check the file system errors and correct the error. Try
the command again.
- 504
- MESSAGE
Unexpected error occurred during INPUT file I/O. (THMGRERR 504)
- CAUSE
An error occurred during access of the input file.
- ACTION
Check the file system errors and correct the error. Try
the command again.
- 505
- MESSAGE
Unexpected error occurred during OUTPUT file I/O. (THMGRERR 505)
- CAUSE
An error occurred during output of the output file.
- ACTION
Check the file system errors and correct the error. Try
the command again.
- 506
- MESSAGE
Unexpected error occurred during $STDIN input operation. (THMGRERR 506)
- CAUSE
An error occurred accessing the $STDIN system file.
- ACTION
Check the file system errors and correct the error. Try
the command again.
- 507
- MESSAGE
Unexpected error occurred during the $STDLIST output. (THMGRERR 507)
- CAUSE
An error occurred accessing the $STDLIST system file.
- ACTION
Check the file system errors and correct the error. Try
the command again.
- 508
- MESSAGE
Unexpected error from FCONTROL intrinsic with
INPUT file. (THMGRERR 508)
- CAUSE
An error occurred accessing the input file using the
FCONTROL intrinsic.
- ACTION
Check the file system errors and correct the error. Try
the command again.
- 509
- MESSAGE
Unexpected error from FGETINFO intrinsic. (THMGRERR 509)
- CAUSE
An error occurred with the FGETINFO intrinsic during file access.
- ACTION
Check the file system errors and correct the error. Try
the command again.
- 510
- MESSAGE
File type is not ASCII. (THMGRERR 510)
- CAUSE
Either the input file or the output file is not an ASCII file.
- ACTION
Make sure that the offending file is an ASCII file.
- 511
- MESSAGE
Invalid file record size. (THMGRERR 511)
- CAUSE
Either the input file or the output file record size is not valid.
- ACTION
Make sure the file record size is 256 characters or less.
- 512
- MESSAGE
Unexpected error from the PRINTOPREPLY intrinsic. (THMGRERR 512)
- CAUSE
An error occurred attempting to notify the console operator
of some event.
- ACTION
Enter the command again.
- 513
- MESSAGE
End-of-file encountered on OUTPUT file. (THMGRERR 513)
- CAUSE
Encountered end of file condition on the output file during the
execution of a command.
- ACTION
Increase the size of the output file.
- 514
- MESSAGE
End-of-file encountered on INPUT file. (THMGRERR 514)
- CAUSE
Encountered end of file condition on the input file during the
execution of a command.
- ACTION
Increase the size of the input file.
- 515
- MESSAGE
End-of-file encountered on $STDLIST. (THMGRERR 515)
- CAUSE
Encountered end of file condition on the $STDLIST during the
execution of a command.
- ACTION
Exit the program and start the application again. Recreate
the output file with a greater number of records and try again.
- 516
- MESSAGE
Unexpected error from FPOINT intrinsic. (THMGRERR 516)
- CAUSE
Access of a file via the FPOINT intrinsic resulted in
an error.
- ACTION
Check the file system errors and correct the error. Try
the command again.
- 800
- MESSAGE
Threshold Manager process has already been created.(THMGRWARN 800)
- CAUSE
An attempt was made to create the Threshold Manager process
when it was already active.
- ACTION
The Threshold Manager is already active and no further
action is required.
- 900
- MESSAGE
Resource is already in the ENABLED state.(THMGRWARN 900 )
- CAUSE
An attempt was made to enable a resource when it has
already been enabled.
- ACTION
This resource is currently enabled, no further action is required.
- 901
- MESSAGE
Resource is already in the DISABLED state.(THMGRWARN 901 )
- CAUSE
An attempt was made to disable a resource after it has
already been disabled.
- ACTION
This resource is currently disabled, no further action is required.
- 902
- MESSAGE
Global notification has already been ENABLED. (THMGRWARN 902)
- CAUSE
An attempt was made to enable Global Notification while the
notification flag was already enabled.
- ACTION
Since Global Notification is already enabled, no further action
is required.
- 903
- MESSAGE
Global notification has already been DISABLED. (THMGRWARN 903)
- CAUSE
An attempt was made to disable global notifications while the
notification flag is already disabled.
- ACTION
Since Global Notification is already disabled, no further action
is required.
- 904
- MESSAGE
Threshold Manager has already been ENABLED. (THMGRWARN 904)
- CAUSE
An attempt was made to enable Threshold Manager after it was
already enabled.
- ACTION
The Threshold Manager process is currently enabled, no further
action is required.
- 905
- MESSAGE
Threshold Manager has already been DISABLED. (THMGRWARN
905)
- CAUSE
An attempt was made to disable Threshold Manager after it
was already disabled.
- ACTION
The Threshold Manager Process is currently disabled, no further
action is required.
|