 |
» |
|
|
|
To invoke LOGTOOL enter:
SYSDIAG
DUI > RUN LOGTOOL
|
For detailed information on any command enter HELP
followed by the command name. For example, to see information
about the LIST command, enter: To display data from a set of system log files: Log on as MANAGER.SYS or with SM, OP or DI capability.
List the names of log files currently on your system
before invoking LOGTOOL: Invoke LOGTOOL:
SYSDIAG
DUI > RUN LOGTOOL
|
To get data from your current logfile enter the following
command to close it and open a new one: If necessary, display logfile record types. (You may skip
this step if you already are famililar with types) : Display the analysis for specified logfiles as a formatted list.
SYSDIAG>LIST LOG=9/14,17,20,22;TYPE=111,146
|
You may enter the LOG parameter as a range of numbers such as 9/14, as a string of numbers such as 17,20,22, or as a combination range and string. (In this example, LOGTOOL will analyze logfiles LOG0009 through LOG0014 and LOG0017 and LOG0020 and LOG0022.) The TYPE parameter specifies the event types you want analyzed. (In the example, types 111, I/O errors, and type 146, maintenance requests, was specified.) If you do not wish to see the analysis on your terminal screen,
but prefer to write the records to an output file, you would use
the ;OUTFILE parameter as follows:
SYSDIAG>LIST LOG=9/14,17,20,22;OUTFILE=MYFILE;TYPE=111,146
|
In this example, the output file MYFILE. You may choose any
name so long as it begins with an alphabetic character. LOGTOOL
writes the output file to the DIAG group of the SYS account.
You may use any HP3000 text editor to examine the output file.
You may also copy it with the COPY command or the FCOPY utility. Exit the LOGTOOL utility:
COMMAND SUMMARY |  |
There are three categories of LOGTOOL commands:
System Log File Commands (SLF), Memory Log File
Commands (MLF), and Miscellaneous Commands (MC).
They are briefly described in the following table. Table 13-1 LOGTOOL Commands Name | Category | Description |
---|
DISPLAYLOG | (SLF) | Displays I/O entries as information is logged. | EXIT | (MC) | Exits LOGTOOL and returns user to DUI. | HELP | (MC) | Gives help on running LOGTOOL. | LAYOUT | (SLF) | Reads in a layout file. | LIST | (SLF) | Lists contents of a system log file. | MEMCLR | (MLF) | Clears the memory logging process log files. | MEMRPT | (MLF) | Displays the contents of the memory log file. | MEMTIMER | (MLF) | Alters the timer value of the memory error logging process. | PURGESYSLOG | (SLF) | Deletes the specified system log files from the disc. | PURGEWORK | (SLF) | Deletes the specified work files from the disc. | REDO | (MC) | Edits any of the last four lines of text entered. | SELECT | (SLF) | Selects specified records from the system log files. | STATUS | (SLF) | Reports on the status of all system log files. | SUSPEND | (MC) | Suspends LOGTOOL and returns control to the DUI. | SWITCHLOG | (SLF) | Causes the system to start a new system log file. | TYPES | (SLF) | Describes the system log file "types". |
Logging system events |  |
The following list shows the types of system log events
that you can track. To do so, you enable a log event by
turning it ON in SYSGEN. Table 13-2 SYSGEN System Logging System Log Events | Event Type |
---|
System logging enabled | 100 | System up record | 101 | Job initiation record | 102 | Job termination record | 103 | Process termination record | 104 | NM file close record | 205 | System shutdown record | 106 | Power failure record | 107 | Spooling log record | 108 | I/O error record | 111 | Physical mount or dismount | 112 | Logical mount or dismount | 113 | Tape labels record | 114 | Console log record | 115 | Program file event | 116 | New commercial spooling | 120 | Architected interface | 130 | Password changes | 134 | System logging configuration | 135 | Restore logging | 136 | Printer access failure | 137 | ACD changes | 138 | Stream initiation logging | 139 | User logging | 140 | Process creation | 141 | Chgroup record | 143 | File open record | 244 | Maintenance request log | 146 | UPS Monitor event logging | 148 | Diagnostic information record | 150 | High-priority machine check | 152 | Low-priority machine check | 152 | Directory open/close logging | 155 | CM file close record | 160 | Chdir | 161 | Process Adoption | 162 | File Owner Change | 163
|
All log information is kept in records. Each record begins
with a standard header and ends with identification information which
varies for each log type. For detailed information about the format
of the log records, read Manager's Guide to MPE/iX Security (32650-90474).
|