 |
» |
|
|
|
|  |  |
The error messages listed occur while entering data for a terminal-type or
printer-type file. Messages are displayed in inverse video on the bottom line
of the screen. If the error(s) are related to a field (or fields) on the
screen, the fields are highlighted in full bright, inverse video. If
more than one field contains an error, only the error message for the first
highlighted field is displayed. - MESSAGE
Character already has other function.
- CAUSE
The character entered has been defined elsewhere to have a different special meaning. Each character can have only one special function.
- ACTION
Choose a different character for this special function, or release this character for use by selecting a different character for the other special function.
- MESSAGE
Character value out of range.
- CAUSE
The character input was out of the range of characters allowed for that function.
- ACTION
Input a character within the range.
- MESSAGE
File is damaged; checksum error.
- CAUSE
The file has been damaged so that the checksum is no longer valid. The utility still reads the data from the file into the work area, and when saving the data back to the file, a correct checksum is generated.
- ACTION
Press Enter again to go to the form selected. Verify the data on the
screen.
- MESSAGE
File is not a valid VFC file.
- CAUSE
The file name specified is not a valid VFC file.
- ACTION
Specify a file which is a VFC file.
- MESSAGE
File is not a valid terminal type file.
- CAUSE
The file specified is not a valid terminal-type file.
- ACTION
Specify a file that is a valid terminal-type file.
- MESSAGE
Invalid file name.
- CAUSE
The file name specified does not meet the requirements for an HP3000 file
name. It might be because the name starts with a non-alphabetic
character or contains non-alphanumeric characters.
- ACTION
Enter a valid file name.
- MESSAGE
File converted to MPE XL format.
- CAUSE
Informational message only.
- ACTION
An action is not required.
- MESSAGE
File System Errors.
- CAUSE
If a file system error occurred when attempting to open the file specified, the file system error message is displayed in the error window.
- ACTION
An action is not required.
- MESSAGE
Invalid file option.
- CAUSE
The file option given was not C,
M, or V.
- ACTION
Enter a valid file option.
- MESSAGE
Invalid form identifier.
- CAUSE
The letter entered in the form specifier field is not one of the known form identifiers.
- ACTION
Enter one of the listed form identifiers in the field.
- MESSAGE
Invalid number.
- CAUSE
You attempted to input a character in numerical format, but the number was not an integer.
- ACTION
Input a valid number.
- MESSAGE
Maximum number of nn characters allowed is nn.
- CAUSE
You have input more than the maximum allowed number of characters for the specified function.
- ACTION
Reduce the number to less than or equal to the maximum specified in the error message.
- MESSAGE
Missing character.
- CAUSE
In the input of a string, the program is expecting another character, but none follows. This is most likely caused by two commas in a row, or a comma at the end of a line without the ampersand.
- ACTION
Remove the extra comma, or insert the appropriate character.
- MESSAGE
Modification of data is not allowed.
- CAUSE
Enter was pressed after choosing the View file option. In View mode, modification of data is not allowed.
- ACTION
Use only the soft keys.
- MESSAGE
MPE/V termtype file; use Form X to convert to MPE XL format.
- CAUSE
The terminal-type file name entered in the Terminal Type File Name field is in MPE V format.
- ACTION
Convert the MPE V termtype file to MPE/iX format.
- MESSAGE
Response must be in the range from nn to nn.
- CAUSE
The field contains a value that is not within the range specified.
- ACTION
Enter a value within the correct range.
- MESSAGE
Response must be None, Line, Page, or Both.
- CAUSE
The field requires N, L,
P, or B
as a valid response, but a different value was input.
- ACTION
Change the value to N, L,
P, or B.
- MESSAGE
Response must be ON or OFF.
- CAUSE
The only valid entries for this field are ON and
OFF, but some other value was entered.
- ACTION
Change the value to either ON or
OFF.
- MESSAGE
Response must be YES or NO.
- CAUSE
The field requires either a Y or an
N as a valid response, but a different value was input.
- ACTION
Change the value to a Y or N.
- MESSAGE
Termtype file is already in MPE XL format.
- CAUSE
Because the terminal-type file is already in MPE/iX format, there is no reason to convert it to MPE/iX format.
- ACTION
An action is not required.
- MESSAGE
The field can only contain digits.
- CAUSE
The field is designed to accept only positive integers. The value entered contains characters other than digits.
- ACTION
Enter a positive integer in the field.
- MESSAGE
The required field is empty.
- CAUSE
The specified field requires a value and nothing was entered.
- ACTION
Enter a value in the field.
- MESSAGE
There is no next form.
- CAUSE
NEXT FORM was pressed when at the last form menu, and there is no next form.
- ACTION
Do not press NEXT FORM at the last form.
- MESSAGE
There is no previous form.
- CAUSE
PREV FORM was pressed when at the Main Menu, or when the VFC option was selected (RUN TTUTIL.PUB.SYS). There is no previous form.
- ACTION
Do not press PREV FORM at the Main Menu, or when the VFC option is selected.
- MESSAGE
There is no VFC defined.
- CAUSE
You specified V for the View file option and to go to the VFC Menu, but this terminal-type file does not have a VFC file associated with it.
- ACTION
Specify a different menu.
- MESSAGE
This key is invalid when no file is selected.
- CAUSE
The function key pressed is invalid when no file has been specified.
- ACTION
Specify a file name first, or press a valid function key.
- MESSAGE
This option is invalid when no terminal type is defined.
- CAUSE
You used N, the Name Only option, when using the VFC entry point. Therefore, there is no terminal-type file to store the name.
- ACTION
Enter another option (C, M,
V) in the VFC Head Menu.
- MESSAGE
This option cannot be selected. The termtype currently
displayed is not a printer termtype file.
- CAUSE
The indicated field(s) contain invalid data.
- ACTION
Either erase the indicated fields or go to another screen. Enter another
option (C, M,
V) in the VFC Head Menu.
- MESSAGE
This option cannot be changed. The termtype currently displayed is a Network Printer termtype file, and this option is non-configurable for this type of file.
- CAUSE
You attempted to modify a terminal-type file whose attributes cannot be reconfigured.
- ACTION
Enter the previous value for the indicated fields again, or go to another
screen. Enter another option (C,
M, V) in the VFC Head Menu.
- MESSAGE
Unknown character.
- CAUSE
The character input does not match one of the accepted character input formats, or the character mnemonic cannot be found in the recognized list.
- ACTION
Input a valid character.
- MESSAGE
Unknown character input format.
- CAUSE
You attempted to input a character, but the character could not be determined.
- ACTION
Input a valid character.
- MESSAGE
Unknown string input format.
- CAUSE
You attempted to input a string, but the input could not be decoded.
- ACTION
Enter in the correct string.
- MESSAGE
User does not have write access to file.
- CAUSE
You specified M, for the Modify file option, but you do not have write access to the file. Therefore, you cannot modify it.
- ACTION
Specify a different file, or use the View option.
- MESSAGE
WARNING: data not saved.
- CAUSE
You tried to exit or specify another file name after modifying the current file but without saving the modifications made.
- ACTION
Press SAVE DATA if you want to save the
UUmodifications. If not, type EXIT at the command line or
press RETURN a second time, to perform the desired operation.
|