 |
» |
|
|
|
|  |  |
- 10
- MESSAGE
The procedure attempted an OPEN_PORT to become the process server for the port, but another process has already made itself the process server.
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 15
- MESSAGE
The procedure attempted an OPEN_PORT to become the process server for the port, but the server type for the port is not a process server.
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 20
- MESSAGE
The procedure attempted to queue a message frame (via a SEND primitive) to a port that is already queued to a port (either this port or some other port), or on the free list of a message port.
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 21
- MESSAGE
An attempt has been made to release a message frame back to the message pool (via REL_MSG_FRAME), but the frame is still queued to a port (either this port or some other port).
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 30
- MESSAGE
The specified address, which must be a message frame, is not a valid message frame for the specified port.
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 40
- MESSAGE
One or more of the specified parameters are bad or inconsistent.
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 50
- MESSAGE
The specified index for the wait queue entry is not a valid index.
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 105
- MESSAGE
The specified control item (for PORT_CONTROL) is not available while executing on the ICS.
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 110
- MESSAGE
The procedure attempted to acquire a counting semaphore port with a global port number (must access this type of semaphore port with a local port number).
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 115
- MESSAGE
The specified value for a port's message threshold is not valid (must be a positive number greater than zero).
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 120
- MESSAGE
The specified port number for the PFP port is either that of a nonexistent port or a local port number.
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 121
- MESSAGE
The procedure attempted to create a resident port and associate it with a non-resident PFP port (PFP port must have same attributes as the port).
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 122
- MESSAGE
The specified PFP port number is a valid port number, but the port it is associated with is not a PFP's port.
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 123
- MESSAGE
The procedure is trying to create a PFP or associate a new port with a PFP, but is unable to send/receive the initiation message to/from the PFP.
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 124
- MESSAGE
The PFP class to associate the new port with is invalid.
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 125
- MESSAGE
The specified name for the PFP's port can not be found in the port directory.
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 126
- MESSAGE
An attempt to purge a PFP's port via (PURGE_PORT); must use KILL_PFP.
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 127
- MESSAGE
An attempt to associate a new port with a PFP that is currently terminating.
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 128
- MESSAGE
An error was encountered when attempting to activate a new PFP process.
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 129
- MESSAGE
The procedure attempted to kill one of the standard (i.e., non-class 4) PFPs.
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 130
- MESSAGE
An innternal error occurred - the initial message sent to a PFP so that it can perform its initialization is not of the proper message format.
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 131
- MESSAGE
An error was encountered when performing a name look-up for a PFP port's name.
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 132
- MESSAGE
The procedure attempted to purge (via PURGE_PORT) one of a process's standard ports; these ports may only be purged via a process termination.
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 160
- MESSAGE
The procedure attempted to perform a SEND request to a subqueue that is not enabled and also dormant.
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 165
- MESSAGE
The procedure attempted to create a semaphore port with emergency messages.
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 170
- MESSAGE
An error (from TABLE MGT) was encountered when trying to obtain a message frame from the port's message pool. Usually, the error is due to the table (pool) being empty.
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 171
- MESSAGE
An error (from TABLE MGT) was encountered while trying to obtain an entry from the port FREEZE DESCRIPTOR TABLE. Usually, the error is due to the table being empty. (This table is used for non-resident ports that are accessed on the ICS).
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 172
- MESSAGE
An error (from TABLE MGT) was encountered when obtaining an entry from either the resident or non-resident port descriptor tables. Usually, the error is due to being out of table entries.
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 173
- MESSAGE
An error (from TABLE MGT) was encountered when trying to obtain a table entry from a process's local port DESCRIPTOR TABLE. Usually, the error is due to the table being empty.
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 174
- MESSAGE
An error (from TABLE MGT) was encountered when creating a process's local port DESCRIPTOR TABLE. The table is created when the first local port number is allocated.
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 175
- MESSAGE
Only expect a local port number in this context.
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 176
- MESSAGE
An error (from TABLE MGT) was encountered when trying to obtain an entry from the STD PROCESS PORTS TABLE. Usually, the error is due to the table being empty. Entries from this table are obtained during process creation.
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 180
- MESSAGE
An attempt to receive a message from a port; there were no messages on any enabled subqueues, and the process did not wish to wait for a message to arrive.
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 190
- MESSAGE
An attempt to manipulate an EMPTY WAIT QUEUE LIST.
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 191
- MESSAGE
The specified WAIT ENTRY was not found in the WAIT queue.
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 200
- MESSAGE
Internal status was never returned to a caller.
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 210
- MESSAGE
An attempt to acquire exclusive access to the specified semaphore port when the process already owns the semaphore port in a shared mode.
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 235
- MESSAGE
The procedure attempted to CREATE or OPEN a port with a fixed global port number, but the global port descriptor for the specified port has already been
allocated.
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 240
- MESSAGE
The specified access is not available yet.
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 241
- MESSAGE
The specified access is no longer supported.
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 260
- MESSAGE
Internal status was never returned to the caller.
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 261
- MESSAGE
Internal status was never returned to the caller.
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 262
- MESSAGE
Incompatible port access. Attempt to FREEZE/UNFREEZE a port or change either of the auxiliary data areas; the port descriptor does not have a FREEZE descriptor. Attempt to WAIT_ON_PORTS for port(s) that do not have process servers.
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 270
- MESSAGE
An attempt to ACCESS a port's message POOL while on the ICS when the POOL was LOCKED in a process environment (before control was transferred to the ICS).
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 280
- MESSAGE
The procedure attempted to access a non-resident port that was also illegal to access from the ICS. Note, that SEND requests will be delayed (and not produce this error); any other port primitive will result in this error.
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 285
- MESSAGE
A process was awoken from the WAIT queue, but the reply message sent does not match that which was expected (i.e., does not match the information in the WAIT queue entry).
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 300
- MESSAGE
When creating a port and specifying an initialization buffer for the server private data area, the initialization length was larger than the entire private data area.
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 342
- MESSAGE
The item value specified (via PORT_CONTROL) for the item type is not valid.
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 343
- MESSAGE
The item number passed to PORT_CONTROL is not valid.
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 344
- MESSAGE
The procedure attempted to use PORT_CONTROL to delete PROCESS_EXECUTABLE options from a port, but the port does not have ICS_EXECUTABLE options either.
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 365
- MESSAGE
The info item passed to PORT_INFO/POOL_INFO is not valid.
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 373
- MESSAGE
The value used for the process interrupt level (to CAUSE_PROCESS_INTERRUPT) is not valid.
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 374
- MESSAGE
The interrupt level (passed to CAUSE_PROCESS_INTERRUPT) is illegal for a CM process interrupt handler.
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 375
- MESSAGE
The value used for the process interrupt type (to CAUSE_PROCESS_INTERRUPT) is not defined, or illegal in this context (other process interrupt manipulation
primitives).
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 380
- MESSAGE
The procedure specified a subqueue location that does not have a message frame queued, or specified an invalid search location to FIND_MSG.
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 390
- MESSAGE
The procedure specified a message frame that is not currently queued to the specified port (from RETRIEVE_MSG).
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 400
- MESSAGE
The procedure specified the MSG_FRAME option to a port-receive primitive, and then proceeded to not specify the MSG parameter to get the message frame
address returned.
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 410
- MESSAGE
The procedure attempte to create a semaphore port with MSG_OPTIONS not as the empty set.
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 420
- MESSAGE
When creating a message pool, the number of initial messages exceeded the total (maximum) number of frames requested.
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 450
- MESSAGE
When creating a message pool, the number of frames to reserve disc space for (for a non-resident pool) exceeded the total (maximum) number of frames requested.
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 460
- MESSAGE
The procedure attempted to create a semaphore port with port options that are invalid for a semaphore port.
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 480
- MESSAGE
The pattern length (passed to FIND_MSG) was not valid; must be positive and non-zero.
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 490
- MESSAGE
The specified PIN was not a valid process number.
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 500
- MESSAGE
The specified address does not point to a message pool.
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 535
- MESSAGE
Either an illegal fixed port number was specified when creating a port, or the port number is not valid (i.e., never created or already returned), but specified for one of the other port access primitives.
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 537
- MESSAGE
An error was encountered when performing a port directory look-up. The port directory entry for the specified name is not valid.
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 540
- MESSAGE
The specified port type is invalid, or the access is inconsistent with the port's type.
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 560
- MESSAGE
The specified server type is invalid, or the access is inconsistent with the port's type of server.
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 580
- MESSAGE
Invalid or inconsistent specification in the "SERVER_DESC" parameter to CREATE_PORT.
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 590
- MESSAGE
An error was encountered from FINDLOCALITY. This routine is called during port creation for a port whose procedure server will execute on the ICS, but whose server code is not memory-resident.
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 600
- MESSAGE
Either the maximum number of possible subqueues has been exceeded, or the subqueue specified exceeds the maximum configured for the specified port.
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 605
- MESSAGE
The specified info. item is not available to access while on the ICS.
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 610
- MESSAGE
It is illegal to access a port via a local port number while on the ICS.
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 620
- MESSAGE
The process interrupt level being accessed in not available to the caller since it exceeds the caller's execution ring level.
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 630
- MESSAGE
When creating a non-resident PORT/POOL that is also ICS_SENDABLE, the message size for the pool is greater than what the port facility could handle if the message had to be delayed.
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 650
- MESSAGE
The specified port server's PFP priority is not within the valid range of - 0..30.
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 651
- MESSAGE
The specified ICS priority for an ICS_EXECUTABLE server is not within the valid range - 0..31.
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 680
- MESSAGE
The number of subqueues requested to configure for the new port is not valid; must be between 1 and 32.
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 710
- MESSAGE
The procedure specified a message frame access to a port that is illegal to use frames with (i.e., the port is not a message port).
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 720
- MESSAGE
A message at the specified subqueue location was not found on an enabled subqueue.
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 730
- MESSAGE
No message was found on the specified port that matched the specified pattern (and search conditions).
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 750
- MESSAGE
The message length specified for a SEND PRIMITIVE exceeds the maximum length for its message pool, or the length specified for a CAUSE_PROCESS_INTERRUPT message exceeds the maximum.
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 760
- MESSAGE
The message length specified to either a SEND/RECEIVE PRIMITIVE or to CAUSE_PROCESS_INTERRUPT must be a positive number of bytes.
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 770
- MESSAGE
The procedure attempted to send a non-zero length message, but the pointer to the message is nil.
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 775
- MESSAGE
The procedure requested to use a reserved message frame, but none were ever reserved.
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 776
- MESSAGE
The procedure requested to use a reserved message frame, but there are no reserved frames currently available (i.e., the reserved list is currently empty).
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 778
- MESSAGE
The mode for the specified process interrupt handler is not valid; must be either NM or CM.
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 779
- MESSAGE
The procedure attempted to delete pending process interrupts for the calling process, but no process interrupts of the requested type were found to delete.
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 780
- MESSAGE
The procedure attempted to enable a port (with a process server) to notify the server via a process interrupt, but the PLABEL for the process interrupt handler has not been defined yet.
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 785
- MESSAGE
An error was detected when trying to block the calling process onto the specified wait queue.
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 790
- MESSAGE
The procedure attempted to access a port with an invalid port number (i.e., the port for the port number was never defined, or already purged, or not within the legal range of possible port numbers).
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 791
- MESSAGE
The procedure attempted to convert a local port number for the specified PIN into its equivalent global port number; either the PIN is invalid, or the procedure currently does not have that local port number defined.
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 824
- MESSAGE
The procedure attempted to UNFREEZE (via PORT_CONTROL) a port that was not previously frozen.
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 825
- MESSAGE
The procedure attempted to CREATE a port with ICS_ACCESSIBLE option and associate it with a message pool that does not have that option.
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 826
- MESSAGE
The procedure returned an internal error when deleting a delayed message for a port (via DELETE_DELAYED_MSG).
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 827
- MESSAGE
The procedure returned an internal error when trying to delete a delayed message for a port (via DELETE_DELAYED_MSG).
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 828
- MESSAGE
An attempt to delete delayed messages for a port while on the ICS.
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 830
- MESSAGE
An attempt to create a port with ICS_SENDABLE option and associate it with a message pool that does not have that option.
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 834
- MESSAGE
An attempt to create a port with ICS_ACCESSIBLE option without MEMORY_RESIDENT
option.
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 835
- MESSAGE
An attempt to create a port with MEMORY_RESIDENT option and associate it with a message pool that does not have the option.
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 836
- MESSAGE
An attempt to change a port's auxiliary data area(s) while the port is currently frozen.
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 840
- MESSAGE
An attempt to create a port with a name that has already been used for another port.
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 841
- MESSAGE
An attempt to open a named port, but the name has not been defined in the port directory (i.e., not created yet).
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 850
- MESSAGE
An attempt to perform a receive primitive on a port when caller is not the port's server, or an attempt to purge a port when the caller is not the port owner, or an attempt to give/release ownership when not the port owner.
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 851
- MESSAGE
An error was encountered from the symbol TABLE MANAGEMENT routines when accessing the port directory.
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 855
- MESSAGE
An attempt to open a port; the port was created with exclusive access, or the caller requested exclusive access and another process already opened it, or an attempt to add exclusive access (via PORT_CONTROL) when others have it opened.
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 856
- MESSAGE
An attempt to access a port, but there is a purge pending (i.e., a PURGE_PORT been requested for the specified port).
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 880
- MESSAGE
An attempt to release a semaphore port that the caller does not own.
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 885
- MESSAGE
An attempt to use a SEND primitive specifying RESERVRD_FRAME option, and the address of the send buffer is already a message frame.
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 890
- MESSAGE
An attempt to perform a NON-SEND port primitive to a port that is not legal to access while on the ICS (i.e., is not resident).
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 900
- MESSAGE
An attempt to acquire a ranked semaphore port that is lower rank than the process currently holds (i.e., acquiring ranked semaphore ports out of order).
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 905
- MESSAGE
An attempt to acquire a semaphore port that has been marked as unavailable (via PORT_CONTROL).
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 910
- MESSAGE
An attempt to acquire a semaphore port that is owned by another process, and the caller did not wish to wait.
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 915
- MESSAGE
The previous owner(s) of a semaphore port terminated while still the owner. The current call to acquire the semaphore port was successful; just a warning that previous owner(s) were not tidy.
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 920
- MESSAGE
An attempt to access a semaphore port while on the ICS.
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 950
- MESSAGE
An attempt to acquire a semaphore port with shared access, but the semaphore port was not configured to allow shared access.
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 960
- MESSAGE
An attempt to acquire a semaphore port with shared access, but the caller used a global port number; must use a local port number to successfully acquired shared access to a semaphore port.
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 990
- MESSAGE
A process blocked on a port WAIT (via a receive port primitive) and requested to be notified if a process interrupt occurred before the block was satisfied. Signifies that the process interrupt occurred first; receive not satisfied.
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 1000
- MESSAGE
An unexplained AWAKE of the calling process from the WAIT queue has occurred.
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 1010
- MESSAGE
The port primitive has not completed due to the specified time out occurring first.
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 1020
- MESSAGE
A nil pointer was used as a pointer to a message pool.
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 1030
- MESSAGE
Only local port numbers are expected to be passed to this port primitive.
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 1040
- MESSAGE
The port number passed into a port primitive was the nil port number. The only primitive that accepts this value is SEND_MSG.
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 1050
- MESSAGE
The specified class for the semaphore to be initialized is not within the valid range.
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 1051
- MESSAGE
The type of semaphore specified for this semaphore record initialization is not within the valid range.
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 1060
- MESSAGE
The procedure attempted to AWAKEN a process from waiting on its standard signal port (via IPC_WAIT_PROCESS), but the process was not currently waiting on its standard signal port; the AWAKE was sent anyway.
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
- 1061
- MESSAGE
The procedure attempted to AWAKEN a process from blocking on its standard signal port, but the process was not waiting on the event(s) specified; process was blocked for a different event on the signal port; AWAKE was sent anyway.
- CAUSE
Same as message content.
- ACTION
Take a system dump and call your Hewlett-Packard Representative.
|