(Subsystem 187)

A system error STACK OVERFLOW occurred.

Number of error entries to PUSH into the Process Error Stack is greater than the Process Error Stack size.

Decrease the error entries or increase the Error Stack size.

A system error STACK UNDERFLOW occurred.

Number of error entries to POP off the Process Error Stack is greater than the Error Stack size, or the Error Stack is empty.

Decrease the error entries or increase the Error Stack size.

The specified STACK ENTRY does not exist on the PROCESS ERROR STACK.

The value of INDEX does not correspond to an error in the global error log, or in the Process Error Stack.

Check the STACK ENTRY and use the valid one.

CREATE_OBJECT failed in creating stack.

In creating stack, an attempt to call CREAT_OBJECT failed; internal error.

Check CREATE_OBJECT.

RELEASE_OBJECT failed in releasing stack.

In releasing stack, an attempt to call RELEASE_OBJECT failed; internal error.

Check RELEASE_OBJECT.

The specified error number is a zero, which is invalid.

User specifies zero as an error number which is invalid in the System Catalog file.

Use the valid number( > 0, < 0).

The specified subsystem number is not valid.

User specified an invalid SUBSYS number (<= 0) or the SUBSYS number is not in the System Catalog.

Use the correct SUBSYS number.

The specified buffer is too small to hold the text of the error message; the message has been truncated.

The value of BUF_LEN is smaller than the actual message in the System Catalog being returned. The message has been truncated.

Increase the buffer size to hold the entire text.

The requested depth is outside of the valid range for the PROCESS ERROR STACK.

User specified the depth outside of the Process Error Stack range. It has to be in the range between 1 and 16.

Use the valid stack depth, which is between 1 and 16.

An error occurred while attempting to create a KSO for use by the ERROR MANAGEMENT subsystem.

An error was encountered in attempting to create the global system error log object or a KSO.

Check the system.

The ERROR MANAGEMENT subsystem was unable to get a pointer to one of its KSOs.

An error occured in attempting to get a pointer to the global system error log or the KSO which holds parameters.

Check the global system error log or KSO.

The specified STACK ENTRY does not exist in the SYSTEM ERROR STACK.

The value of DEPTH does not correspond to an error in the System Error Stack.

Check the value of DEPTH and System Error Stack.

A RECOVER statement was unexpectedly invoked in the ERROR MANAGEMENT subsystem.

An unexpected trap occurred which caused the RECOVER block to be invoked.

Check the error trap.

An attempt was made to access process error stack by a caller running on the ICS.

The caller is on ICS and, therefore, no operation was performed when attempting to access process error stack.

Do not access process error stack when the caller is on ICS.

An error occurred while attempting to close the System Catalog.

When trying to close the System Catalog, an error occured.

Check the System Catalog. You must open it before you can close it.

The process error stack is empty.

User is trying to access the process error stack and there are no errors in the stack.

Check the process error stack before accessing it.

An error occurred while attempting to open the System Catalog; error messages cannot be obtained.

User is trying to open the System Catalog to access the error message and it failed.

Check System Catalog.

The BUFFER and BUF_LEN parameters must be supplied in order to return the text of the specified error to the caller.

User specified a message to go into buffer and BUFFER and BUF_LEN parameters are not there.

Check the parameters and provide BUFFER and BUF_LEN parameters.

The requested display option is invalid.

User is trying to use an invalid display option to display errors.

Check the requested display option and use the correct one.

There is no message set in the System Catalog which corresponds to the subsystem number in the specified status.

User is trying to use the invalid subsystem set number to access the System Catalog.

Check the System Catalog or use the valid subsystem set number.

There is no error number in the System Catalog which corresponds to the specified status.

User is tring to use the invalid error number to access the error message from System Catalog.

Check the System Catalog or use the valid error number.

The specified number of message parameters to push is invalid; valid range is from 1 to 5.

The value of message parameters is not in the range. The valid range is from 1 to 5.

Check the value of message parameters and use the valid one.

One of the message parameters to be pushed is not a valid string parameter.

One of the string parameters specified is invalid, meaning that the delimiter in the beginning of the string was not found prior to the maximum number of characters allowed in the string.

Check the string parameter and correct it.

WARNING ** The error management subsystem was unable to open the System Catalog; error messages cannot be obtained.

When the user tried to access the System Catalog to obtain error messages, an error occurred.

Check the System Catalog or Error messages.

WARNING ** Message set ! was not found in the System Catalog.

If the user is trying to access System Catalog with an invalid subsystem number, this warning message is issued.

Check the System Catalog and use the valid number.

WARNING ** Message set !, Error number ! was not found in the System Catalog.

When the user is trying to access the System Catalog with invalid subsystem numbers and error number, this warning message is issued.

Check the subsystem and error number before accessing the System Catalog.

WARNING ** An unexpected error was encountered while reading error messages from the System Catalog.

When the user tried to query the System Catalog with subsystem numbers and message numbers, an internal error occurred.

Check the subsystem numbers and message numbers.

The ERROR MANAGEMENT subsystem was unable to initialize its semaphore.

When the ERROR MANAGEMENT subsystem tried to call the Control Block routine to initialize its semaphore, an internal error occurred.

Check the internal error and contact the Control Block routines owner.

WARNING ** One or more entries on the error stack have been overwritten.

If the user tried to dump the entire error stack and some entries were overwritten, this warning message is issued to warn the user of that fact.

Check the error stack.

The menu selection is not valid; select from the menu choices only.

User has entered a character string which does not match any of the options specified in the accompanying menu of choices.

Enter only the indicated selections.

The specified INFO string is longer than allowed.

User has entered an INFO string which is larger than the program can handle.

The program will handle an INFO string with the largest possible subsystem INFO string. Entries must be limited to 50 characters between the quotations.

Only numeric digits (0...9) and an optional sign indicator (+, -) are allowed.

Numeric entries may contain a leading "+" or "-", but all other characters must be digits only. Blanks (other than leading or trailing blanks) are not allowed.

Enter a valid numeric quantity.

The specified time code contains an invalid date and/or time.

The time stamp code provided is not recognized by the system conversion procedures.

Check the time code and re-enter correctly.

An internal failure of NATIVE LANGUAGE SUPPORT intrinsic occurred.

Unexpected error of an unknown nature returned from NLS.

Notify your support engineer. An error stack dump may indicate the precise nature of the error.

NATIVE LANGUAGE SUPPORT is not available on this system.

This is an unexpected error which should have been detected at the start of the program and corrected by bypassing Native Language support.

Notify your support engineer.

The subsystem was specified without a corresponding message number.

The message number (second parameter) was left blank after specifying a subsystem number.

Either provide a message number or delete the subsystem number from the INFO string.

A message number was specified without a corresponding subsystem number.

A message number was specified but the subsystem number (first parameter) was left blank.

You must either specify both a subsystem number and message number or neither.

The specified number is outside the permissible range of 1...32766.

The user has provided a number less than 0 or greater than one less than maxshortint. (One less than maxshortint is a message catalog limitation).

Restrict entries to the indicated range.

The specified number is outside the permissible range of 1...2147483647.

The user has provided a number less than 0 or greater than maxint.

Restrict entries to the indicated range.

The specified number is outside the permissible range of 1...9223372036854775807.

The user has provided a number less than 0 or greater than maxlongint.

Restrict entries to the indicated range.

The specified number is larger/smaller than the largest/smallest integer which this system can handle.

The user has provided a number that this system can not handle.

Check the number and use a correct one.

An unexpected problem was encountered while trying to convert a string to a number.

When trying to convert a string to a number, an internal error was encountered.

Check the string.

Too few parameters were specified in the INFO string.

Syntax error. Parameters may be nil, but their corresponding delimiters must be present.

Adhere to required syntax. The INFO string for this program must contain a minimum of two parameters. If you need help on syntax, type "HELP MSGUTIL".

The name for the specified subsystem could not be obtained.

The user has provided a subsystem number which is not in the System Catalog.

Check the System Catalog or use the right number.

Unable to display Message #

Information only.

WARNING - Time/date display capabilities could not be activated.

The program could not adequately initialize range checking for time codes. Therefore, time code conversions will not be accepted. This error is unexpected and may be system dependent.

Other functions of the program will continue to function. Notify your support engineer.

WARNING - Extra, unused parameters were specified in the INFO string.

More than three parameters have been supplied. MSGUTIL ignored all past those first three.

Adhere to the required syntax.