Prints a summary report for one or more communications subsystems.
Syntax
SUMMARYCONF subsystem[, subsystem[, ...]]
|
Parameters
- subsystem
The name of the subsystem(s) for which the report
will be generated. If more than one subsystem is entered, a report
will be printed for each subsystem in the order given. If ALL is
entered, a report will be printed for every subsystem. Valid entries
are ALL, DTS,
NETXPORT, SNANODE,
NRJE, IMF,
DHCF, APPC,
and RJE.
Description
SUMMARYCONF displays a summary report for a particular subsystem.
This command is identical to the Print Summary function in the NMMGR
Output Configuration screen.
Output is directed to the file defined in the file equation
FORMLIST. If FORMLIST
is not defined, output is sent to $STDLIST.
When you use SUMMARYCONF
to print a summary report for the distributed terminal subsystem
(DTS), you can also specify a summary option to designate additional
items in the DTS subsystem you wish to have reported. You do so
in one of two ways. The first way is to enter the option on the
same line as the command. For example:
SUMMARYCONF DTS,LINK
will cause a report to be generated for the DTS link configuration.
You can use this method regardless of whether you entered maintenance
mode from screen mode you are running a job to generate output.
You can use the second way to specify a summary option for
the DTS subsystem only if you have entered maintenance mode from
screen mode. This method is to enter SUMMARYCONF DTS
at the NMMGR maintenance mode prompt, with no option specified.
A new prompt will appear, as follows:
DTS Summary>
You can enter the DTS print option at this prompt. If you
do not want to generate any additional DTS reports, enter E[XIT]
at the prompt. You will be returned to the maintenance mode prompt.
The following DTS print summary options are available:
- ALL
Displays all DTS configuration information.
- DTC [dtcname]
Displays the configuration for all DTCs or for the
DTC whose name is specified in dtcname.
- DTS
Displays the DTS subsystem configuration parameters.
- E[XIT]
Leaves DTS Summary and returns you to the maintenance
mode prompt.
- HELP
Displays the available DTS summary options.
- LDEV [ldev[/ldev]]
Displays the configuration for all ldevs (logical
devices), a single ldev, or a range of ldevs.
- LINK
Displays the link configuration for the DTS.
- PORT [dtcname [card [port]]]
Displays the configuration for all configured ports,
all ports on a specified DTC, all ports on a specified DTC and card,
or for a specific DTC, card, and port.
- PROFILE [profile]
Displays the configuration for all profiles or for
a specified profile.
- X.25 Card [card#[,option]]
Displays the information about the Host-Based X.25
Card configuration.
- OPTIONS:
- -LEVEL12
Display the level 1 and 2 configuration.
- -LEVEL14
Display the level 3 configuration miscellaneous
configuration data.
- -PAD
Display the Nailed PAD data.
- -SEC
Display the PAD security data.
- -SYS
Display the System to System configuration data.
Example
To display the summary report for NETXPORT:
NMMGR> SUMMARYCONF NETXPORT
|
To
display the summary report for profiles defined in the DTS subsystem:
NMMGR> SUMMARYCONF DTS,PROFILE
|
Or: