 |
» |
|
|
|
A- abort
error, Abort Errors
- access method
- transmission, Hardware Protocols
- access port, System Console, System Console
- Additional
End-of-Record character, Terminating Reads, Specifying an AEOR Character, Device Control Directives
- additional end-of-record character, Parameters
- AEOR
- character, Device Control Directives
- AEOR
character, Terminating Reads, Specifying an AEOR Character, Parameters
- alert
character
- block mode, Device Control Directives
- allocate a terminal, Parameters
- assignment statement, Functional Returns
- Asynchronous Serial Communications
(ASC), Asynchronous Serial Communications
- Attachment
Unit Interface (AUI), ThickLAN Connection
B- backspace character, Controlling Backspace Processing
- define, Device Control Directives
- backspace
processing, Controlling Backspace Processing
- backspace response, Controlling Backspace Processing, Device Control Directives
- binary editing mode, Binary Mode, Setting Transparent Editing Mode, Setting Binary Editing Mode, Controlling Device XON/XOFF Processing, Parameters
- bit group
notation, Parameters
- block mode, Block Mode, Triggering Reads, Parameters, Parameters, Parameters
- HP, Parameters, Device Control Directives
- user, Block Mode, Additional Typeahead Considerations, Parameters
- VPLUS, Block Mode, Additional Typeahead Considerations, Log On Access, General DTC Telnet Restrictions
- block
mode handshake, Parameters
- block
mode read timer, Terminating Reads
- block mode read trigger, Triggering Reads, Device Control Directives
- BNC
T-connector, ThinLAN Connection
- bypass
typeahead buffer, Bypassing the Typeahead Buffer, Device Control Directives
- byte
count, Using FREAD
C- cancel character, Device Control Directives
- carriage
control, Using FWRITE, Parameters
- carriage control directives, Parameters, Parameters
- CCITT
X.25 protocol, PAD Access to MPE/iX Systems
- character
- AEOR, Terminating Reads, Specifying an AEOR Character, Parameters, Device Control Directives
- backspace, Controlling Backspace Processing, Device Control Directives
- block mode alert, Device Control Directives
- block
mode read trigger, Device Control Directives
- end-of-medium, Parameters
- EOR, Terminating Reads, Specifying an End-of-Record Character, Parameters, Device Control Directives
- line
deletion, Device Control Directives
- read
trigger, Flow Control Protocols, Triggering Reads, How Typeahead Mode Works, Device Control Directives
- subsystem
break, Subsystem Break Intrinsics, Parameters, Device Control Directives
- XOFF, Flow Control Protocols
- XON, Flow Control Protocols
- character echo, Setting Binary Editing Mode, Parameters
- character mode, Character Mode, Triggering Reads
- check
parity, Parameters
- closing files, Closing Files
- cluster
controller, PAD Access to MPE/iX Systems
- compatibility mode, MPE/iX System Intrinsics, Subsystem Break Processing
- condition
codes, Condition Codes, Altering Terminal Deficefiles
- configuraiton
file, Configuration
- convenience
echo, Typeahead Mode and Echo
- CSMA/CD, Hardware Protocols
- current speed setting, Parameters
D- data editing mode, Data Editing Modes, Setting Transparent Editing Mode
- data overrun, Flow Control Protocols, Parameters
- Datacommunications
and Terminal Controller (DTC), DTC
- Datacommunications
and Terminal Subsystem (DTS), Configuration
- Datacommunications
and Terminal Subystem (DTS), Datacommunications and Terminal Subsystem (DTS)
- DC1 character, Flow Control Protocols
- DC3 character, Flow Control Protocols
- define
block mode alert character, Device Control Directives
- define
form feed replacement character, Device Control Directives
- define subsystem
break character, Device Control Directives
- delete treated
like backspace, Device Control Directives
- determine block mode type supported, Device Control Directives
- determine speed setting, Parameters
- determine subsystem break character, Device Control Directives
- determine terminal type, Parameters
- device
- log-on, Session-Accepting Devices
- programmatic, Programmatic Devices
- session-accepting, Session-Accepting Devices
- slaved, Slaved Devices
- device
close, Use
- device configuration, Local Device Settings
- device independence, File System Overview
- device operation mode, Device Operation Modes
- device
settings, Local Device Settings
- device speed, Device Control Directives
- device
spooled, Spooled Devices
- device
XON/XOFF flow control, Controlling Host and Device XON/XOFF Processing
- device-dependent
characteristic, File Equations
- devicefile, Controlling Asynchronous Devices Programmatically, File System Overview
- disable XON/XOFF flow control, Device Control Directives
- disk file, File System Overview
- download process, DTC
- DTC, DTC
- DTC
diagnostics, DTC
- DTC download, DTC
- DTC echo, Parameters
- DTC switching, OpenView Workstation
- DTC Switching User Interface, Log On Access
- DTC User Interface, OpenView Workstation
- DTC/X.25 Network Access Card, DTC
- DTC/X.25
Network Access card, Hardware Requirements
- DTS, Datacommunications and Terminal Subsystem (DTS)
E- echo, Typeahead Mode and Echo, Parameters, Parameters, Device Control Directives
- setting, Device Control Directives
- editing
mode, Data Editing Modes, Setting Transparent Editing Mode
- binary, Binary Mode, Setting Transparent Editing Mode, Setting Binary Editing Mode, Controlling Device XON/XOFF Processing, Parameters
- standard, Standard Mode
- transparent, Transparent Mode, Setting Transparent Editing Mode, Setting Transparent Editing Mode, Subsystem Break Intrinsics, Parameters, Device Control Directives
- editing mode
binary, Setting Binary Editing Mode
- Electronic
Industries Association (EIA), Hardware Protocols
- enable parity, Altering Device Control Settings
- enable/disable escape
sequence read termination, Enabling Escape Sequence Read Termination
- enabling
- parity, Device Control Directives
- end-of-file, End of File Indicators
- end-of-medium
character, Parameters
- end-of-record character, Specifying an End-of-Record Character
- EOR
character, Terminating Reads, Specifying an End-of-Record Character, Parameters, Device Control Directives
- error
checking, Using Intrinsics in your Program
- error information, Use
- escape sequence read termination, Enabling Escape Sequence Read Termination, Device Control Directives
F- FCHECK, Condition Codes, Timing a Read, Syntax Description, FCHECK, Use, Condition Codes, Condition Codes
- FCLOSE, Setting Transparent Editing Mode, Closing Files, Use
- FCONTROL, Status Information, Altering Terminal Deficefiles, Closing Files, PAD Programming Considerations, DTC Telnet Programming Considerations, FCONTROL, FCONTROL, Use
- FCONTROL(1), Parameters, Parameters
- FCONTROL(10), Parameters
- FCONTROL(11), Altering Device Control Settings, Parameters
- FCONTROL(12), Parameters
- FCONTROL(13), Setting Binary Editing Mode, Parameters
- FCONTROL(14), Parameters
- FCONTROL(15), Parameters
- FCONTROL(16), Parameters
- FCONTROL(17), Parameters
- FCONTROL(22), Timing a Read, Parameters
- FCONTROL(23), Parameters
- FCONTROL(24), Altering Device Control Settings, Parameters, Parameters
- FCONTROL(25), Terminating Reads, Specifying an AEOR Character, Parameters
- FCONTROL(26), Binary Mode, Setting Binary Editing Mode, Parameters
- FCONTROL(27), Binary Mode, Setting Binary Editing Mode, Parameters
- FCONTROL(28), Parameters
- FCONTROL(29), Block Mode, Parameters
- FCONTROL(34), Parameters
- FCONTROL(35), Parameters
- FCONTROL(36), Altering Device Control Settings, Parameters, Parameters
- FCONTROL(37), Parameters
- FCONTROL(38), Parameters
- FCONTROL(39), Parameters
- FCONTROL(4), Terminating Reads, Setting a Read Time Limit, Parameters
- FCONTROL(40), Altering Device Control Settings, Parameters
- FCONTROL(41), Transparent Mode, Terminating Reads, Setting Transparent Editing Mode, Parameters, Parameters
- FDEVICECONTROL, Triggering Reads, Altering Terminal Deficefiles, Using FDEVICECONTROL, PAD Programming Considerations, DTC Telnet Programming Considerations, FDEVICECONTROL, FDEVICECONTROL, Use
- FERRMSG, Condition Codes, Use
- FERRMST, Use
- FFILEINFO, File System Hierarchy, Recommended Programming Practices, Use
- FGETINFO, Status Information, Use
- file
domain, File System Overview
- file
equation, File Equations
- file information display, Use
- file number, Functional Returns, Opening Asynchronous Devicefiles, Syntax Description, Use
- file
redirection, Opening Asynchronous Devicefiles
- File
System, Control, Controlling Asynchronous Devices Programmatically, Programmatic Devices
- file system error code, Parameters
- File
System hierarchy, File System Hierarchy
- flow control, Non-Hewlett-Packard Devices, Flow Control Protocols, Controlling Device XON/XOFF Processing
- XON/XOFF, How Typeahead Mode Works, Parameters, Device Control Directives
- flow control protocol, Flow Control Protocols
- flush
typeahead buffer, Flushing the Typeahead Buffer, Device Control Directives
- FOPEN, Optional Capabilities, Functional Returns, Opening Asynchronous Devicefiles, File Open Intrinsics, Using FREAD, Use
- form
feed allowed, Device Control Directives
- form
feed replacement character, Device Control Directives
- formal file designator, File Equations, File Open Intrinsics, Use, Parameters, Item Number, Item Summary
- FREAD, Functional Returns, Reading From Asynchronous Devices, Using FREAD, Setting Binary Editing Mode, FREAD and FWRITE, FREAD and FWRITE, Use, Use
- FSETMODE, Use
- FSETMODE(4), Parameters
- functional return, Obtaining Information Using Intrinsics, Functional Returns, Functional Return
- Fundamental Operating
System (FOS), Control
- FWRITE, Writing to Asynchronous Devices, FREAD and FWRITE, FREAD and FWRITE, Use
H- hardware protocol, Hardware Protocols
- host
XON/XOFF flow control, Controlling Host and Device XON/XOFF Processing
- HP block mode, Device Control Directives
- HPFOPEN, MPE/iX System Intrinsics, Status Parameter, Optional Capabilities, Functional Returns, Opening Asynchronous Devicefiles, File Open Intrinsics, Using FREAD, Use
I- IEEE, Hardware Protocols
- IEEE
802.3 LAN, Hardware Protocols
- IEEE
802.3 standard, Local Area Network
- ignore parity errors, Device Control Directives
- input byte
count, Terminating Reads
- input
echo, Parameters
- input mode, Input Modes
- block, Block Mode
- character, Character Mode
- Institute of Electrical and Electronics Engineers, Hardware Protocols
- instrinsic
- XCONTRAP, Use
- inter-byte
timer, Device Control Directives
- intrinsic
- definition of, MPE/iX System Intrinsics
- FCHECK, FCHECK
- FCLOSE, Use
- FCONTROL, Use
- FDEVICECONTROL, Use
- FERRMSG, Use
- FFILEINFO, Use
- FGETINFO, Use
- FOPEN, Use
- FREAD, Use
- FSETMODE, Use
- FWRITE, Use
- HPFOPEN, Use
- IODONTWAIT, Use
- IOWAIT, Use
- PRINT, Use
- PRINTFILEINFO, Use
- READ, Use
- READX, Use
- RESETCONTROL, Use, Use
- IODONTWAIT, Optional Capabilities, Functional Returns, Using FREAD, Use
- IOWAIT, Optional Capabilities, Functional Returns, Using FREAD, Use
L- LAN, Local Area Network, Hardware Protocols
- LAN address, Local Area Network
- LAN Interface Card (LANIC), LAN Interface Card (LANIC)
- line
block mode, Block Mode
- line deletion
character, Device Control Directives
- line
deletion response, Device Control Directives
- line speed, Altering Device Control Settings, Parameters, Parameters
- current, Parameters
- setting, Device Control Directives
- line termination character, Parameters
- line
terminator
- additional, Parameters
- local area network, Local Area Network
- local device configuration, Local Device Settings
- local device settings, Local Device Settings
- local echo, Parameters
- log-on device, Session-Accepting Devices
- logical console, System Console, System Console
N- nailed connections, Nailed and Non-Nailed Connections, PAD Configuration Values
- nailed device, Nailed and Non-Nailed Connections
- native mode, MPE/iX System Intrinsics, Status Parameter, File Open Intrinsics, Subsystem Break Processing
- Network Services
- NS, Virtual Terminal Access on MPE/iX Systems
- NMMGR, Configuration, Parameters
- node address, Local Area Network
- Node
Management Configuration Manager, Configuration, Parameters
- non-HP devices, Non-Hewlett-Packard Devices
- non-nailed connection, Nailed and Non-Nailed Connections
- non-nailed device, Nailed and Non-Nailed Connections
- non-supported devices, Non-Hewlett-Packard Devices
- NOWAIT
I/O, Optional Capabilities, Using FREAD, Functional Return, Use, Use
- NS, Virtual Terminal Access on MPE/iX Systems
O- opening a file, Opening Asynchronous Devicefiles
- OpenView
DTC Manager, DTC, OpenView Workstation, Configuration with OpenView DTC Manager, Network Configuration Requirements, Network configuration Requirements, Parameters
- OpenView workstation, Datacommunications and Terminal Subsystem (DTS), OpenView Workstation, Parameters
- optional capability, Optional Capabilities
- optional parameters, Syntax
P- pacing
method, Flow Control Protocols
- Packet
Assembler/Disassembler, PAD Access to MPE/iX Systems
- packet switched network, PAD Access to MPE/iX Systems
- PAD
- nailed, PAD Configuration Values
- private, PAD Access to MPE/iX Systems
- public, PAD Access to MPE/iX Systems
- PAD connection, DTC
- PAD
device, PAD Access to MPE/iX Systems
- page block mode, Block Mode
- parallel transmission, Asynchronous Serial Communications
- parameters
- optional, Syntax
- required, Syntax
- parity, Terminating Reads, Parameters
- enabling, Altering Device Control Settings
- setting, Altering Device Control Settings
- parity checking, Device Control Directives
- parity
enabling, Device Control Directives
- parity generation, Device Control Directives
- parity type, Parameters, Device Control Directives
- set, Device Control Directives
- PDN, PAD Access to MPE/iX Systems
- port, File Open Intrinsics
- postspace movement, Parameters
- prespace
movement, Parameters
- PRINT, Writing to Asynchronous Devices, Using PRINT, Use
- printer type, Serial Printers
- PRINTFILEINFO, Use
- private PAD, PAD Access to MPE/iX Systems
- privileged
mode, Special Considerations, Special Considerations
- program captive, Programmatic Devices
- programmatic
device, Programmatic Devices
- protocol, Protocols
- flow control, Flow Control Protocols
- hardware, Hardware Protocols
- XON/XOFF, Flow Control Protocols, Controlling Device XON/XOFF Processing
- PSN, PAD Access to MPE/iX Systems
- Public
Data Network, PAD Access to MPE/iX Systems
- public PAD, PAD Access to MPE/iX Systems
R- READ, Functional Returns, Reading From Asynchronous Devices, Using READ or READX, Setting Binary Editing Mode, Use
- read limit
timer, Terminating Reads, Timing a Read, Setting a Read Time Limit, Device Control Directives
- read termination, Terminating Reads
- read timeout value, Device Control Directives
- read timer, Terminating Reads, Timing a Read, Parameters, Device Control Directives
- read trigger, Flow Control Protocols, Triggering Reads, How Typeahead Mode Works, Device Control Directives
- Read/Write
access, Syntax Description
- READX, Functional Returns, Reading From Asynchronous Devices, Using READ or READX, Setting Binary Editing Mode, Use, Use
- receive
pacing, Flow Control Protocols
- RecvPace, Flow Control Protocols
- required parameters, Syntax
- RESETCONTROL, Subsystem Break Intrinsics, Subsystem Break Example, Parameters, Use, Use
- RS-232-C
connection, DTC
- RS-232-C
modem connection, DTC
- RS-232-C
standard, Hardware Protocols
- RS-422
connection, DTC
- RS-422 standard, Hardware Protocols
S- select backspace response action, Device Control Directives
- selt-test, DTC
- serial printer, Serial Printers
- serial transmission, Asynchronous Serial Communications
- session-accepting
device, Session-Accepting Devices
- set line speed, Parameters
- set parity, Altering Device Control Settings
- set
parity generation and checking, Device Control Directives
- set parity type, Device Control Directives
- set
read limit timer, Setting a Read Time Limit
- set
terminal type, Parameters, Parameters
- set timeout value, Device Control Directives
- set
typeahead mode, Device Control Directives
- set XOFF timer, Device Control Directives
- setting
binary editing mode, Setting Binary Editing Mode
- setting echo, Device Control Directives
- setting
the number of stop bits, Setting the Number of Stop Bits
- setting transparent editing mode, Setting Transparent Editing Mode, Setting Transparent Editing Mode, Parameters, Device Control Directives
- setting
typeahead mode, Setting Typeahead Mode
- single echo typeahead mode, Device Control Directives
- slaved device, Slaved Devices
- software configuration, Configuration
- special character, Data Editing Modes
- specify data bits per character, Device Control Directives
- specify parity type, Parameters
- spooled device, Spooled Devices
- spooling facility, Spooled Devices
- standard
editing mode, Standard Mode
- start bit, Asynchronous Serial Communications
- station
address, Local Area Network
- status information, Status Information
- status
parameter, Status Parameter
- stop bit, Asynchronous Serial Communications
- strap
settings, Local Device Settings, Sending Escape Sequences
- subsystem
break, Terminating Reads, Using Subsystem Break, The Break Keys, Parameters, Device Control Directives, Additional Discussion, Use
- subsystem
break character, Parameters, Device Control Directives
- subsystem
break handler, The Break Keys
- subsystem break response, Device Control Directives
- supported speed, Parameters, Device Control Directives
- suppress
echo read termination characters, Device Control Directives
- switching, OpenView Workstation
- Switching User Interface, Log On Access
- switching user interface, OpenView Workstation, Session-Accepting Devices
- system
break, Terminating Reads, The Break Keys, Parameters, Device Control Directives
- system break response, Device Control Directives
- system
console, System Console, System Console
- system intrinsics, MPE/iX System Intrinsics
T- TELENET, PAD Access to MPE/iX Systems
- Telnet Access Card, DTC Telnet Access to MPE/iX Systems, Hardware Requirements
- TermDSM, DTC
- terminal, Terminals
- terminal diagnostics, DTC
- terminal
settings, Sending Escape Sequences
- terminal
speed, Parameters
- terminal strapping, Local Device Settings, Sending Escape Sequences
- terminal switching, OpenView Workstation, Session-Accepting Devices
- terminal type, Terminals, Parameters, Parameters, Parameters
- terminating reads, Terminating Reads
- ThickLAN, Local Area Network, ThickLAN Connection
- ThinLAN, Local Area Network, ThinLAN Connection
- ThinLAN configuration, ThinLAN Connection
- ThinMAU, ThinLAN Connection
- timeout
value, Terminating Reads, Setting a Read Time Limit, Parameters, Device Control Directives
- timing a read, Timing a Read, Parameters
- transmission
access method, Hardware Protocols
- transmit pacing, Flow Control Protocols
- TRANSPAC, PAD Access to MPE/iX Systems
- transparent
editing mode, Transparent Mode, Setting Transparent Editing Mode, Setting Transparent Editing Mode, Subsystem Break Intrinsics, Parameters, Parameters, Device Control Directives
- transport
flow control protocol, Flow Control Protocols
- troubleshooting, DTC
- typeahead buffer, How Typeahead Mode Works
- typeahead mode, Typeahead Mode, Device Control Directives
X- X.25
network address, PAD Access to MPE/iX Systems
- XCONTRAP, Subsystem Break Intrinsics, Subsystem Break Example, Parameters, Additional Discussion, Use
- XmitPace, Flow Control Protocols
- XOFF
character, Flow Control Protocols
- XOFF timer, Device Control Directives
- XON
character, Flow Control Protocols
- XON/XOFF
flow control, Non-Hewlett-Packard Devices, Controlling Device XON/XOFF Processing, How Typeahead Mode Works, Parameters, Device Control Directives
- XON/XOFF protocol, Flow Control Protocols
|