 |
» |
|
|
|
The DTS restart capability is provided by the DTCCNTRL
command and allows you to restart the DTS subsystem.  |  |  |  |  | NOTE: The DTS must first be shut down before it can be restarted. |  |  |  |  |
Performing a DTS Restart |  |
To perform a DTS restart, type the DTCCNTRL
command at the CI prompt either without specifying the desired restart
operation or by specifying it using the syntax outlined below: DTS restart operation not specified: :DTCCNTRL | 0 | exit | 1 | dynamically
implement DTS changes made in NMMGR | 2 | view status
of last DTS dynamic configuration | 3 | automatically
add a new DTC | 4 | shutdown
DTS subsystem | 5 | restart
DTS subsystem | 6 | manage/dynamically
configure host-based x.25 | 7 | help | | For
help on these topics, select 7 at the prompt below. | | Select
one of the numbers above corresponding to the desired operation:
5 |
DTS restart operation specified: :DTCCNTRL func=restart
 |  |  |  |  | NOTE: To dynamically configure DTS changes, refer to the "Dynamic
Configuration" section earlier in this chapter. To automatically
add/configure a host-based managed DTC to DTS without needing to
specify detailed configuration information such as DTC cards/boards
and ldevs, refer to Chapter 3 “Automatic Configuration of DTCs”
To manage/dynamically configure host-based X.25 links, refer to
the Configuring and Managing Host-Based X.25 Links
manual. |  |  |  |  |
|